package main import ( "encoding/hex" "fmt" "sync" "sync/atomic" "github.com/lightningnetwork/lnd/lndc" "github.com/lightningnetwork/lnd/lnrpc" "github.com/roasbeef/btcd/txscript" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" "github.com/roasbeef/btcwallet/waddrmgr" "golang.org/x/net/context" ) var ( defaultAccount uint32 = waddrmgr.DefaultAccountNum ) // rpcServer is a gRPC, RPC front end to the lnd daemon. type rpcServer struct { started int32 // To be used atomically. shutdown int32 // To be used atomically. server *server wg sync.WaitGroup quit chan struct{} } // A compile time check to ensure that rpcServer fully implements the // LightningServer gRPC service. var _ lnrpc.LightningServer = (*rpcServer)(nil) // newRpcServer creates and returns a new instance of the rpcServer. func newRpcServer(s *server) *rpcServer { return &rpcServer{server: s, quit: make(chan struct{}, 1)} } // Start launches any helper goroutines required for the rpcServer // to function. func (r *rpcServer) Start() error { if atomic.AddInt32(&r.started, 1) != 1 { return nil } return nil } // Stop signals any active goroutines for a graceful closure. func (r *rpcServer) Stop() error { if atomic.AddInt32(&r.shutdown, 1) != 1 { return nil } close(r.quit) return nil } // addrPairsToOutputs converts a map describing a set of outputs to be created, // the outputs themselves. The passed map pairs up an address, to a desired // output value amount. Each address is converted to its corresponding pkScript // to be used within the constructed output(s). func addrPairsToOutputs(addrPairs map[string]int64) ([]*wire.TxOut, error) { outputs := make([]*wire.TxOut, 0, len(addrPairs)) for addr, amt := range addrPairs { addr, err := btcutil.DecodeAddress(addr, activeNetParams) if err != nil { return nil, err } pkscript, err := txscript.PayToAddrScript(addr) if err != nil { return nil, err } outputs = append(outputs, wire.NewTxOut(amt, pkscript)) } return outputs, nil } // sendCoinsOnChain makes an on-chain transaction in or to send coins to one or // more addresses specified in the passed payment map. The payment map maps an // address to a specified output value to be sent to that address. func (r *rpcServer) sendCoinsOnChain(paymentMap map[string]int64) (*wire.ShaHash, error) { outputs, err := addrPairsToOutputs(paymentMap) if err != nil { return nil, err } return r.server.lnwallet.SendOutputs(outputs, defaultAccount, 1) } // SendCoins executes a request to send coins to a particular address. Unlike // SendMany, this RPC call only allows creating a single output at a time. func (r *rpcServer) SendCoins(ctx context.Context, in *lnrpc.SendCoinsRequest) (*lnrpc.SendCoinsResponse, error) { rpcsLog.Infof("[sendcoins] addr=%v, amt=%v", in.Addr, btcutil.Amount(in.Amount)) paymentMap := map[string]int64{in.Addr: in.Amount} txid, err := r.sendCoinsOnChain(paymentMap) if err != nil { return nil, err } rpcsLog.Infof("[sendcoins] spend generated txid: %v", txid.String()) return &lnrpc.SendCoinsResponse{Txid: txid.String()}, nil } // SendMany handles a request for a transaction create multiple specified // outputs in parallel. func (r *rpcServer) SendMany(ctx context.Context, in *lnrpc.SendManyRequest) (*lnrpc.SendManyResponse, error) { txid, err := r.sendCoinsOnChain(in.AddrToAmount) if err != nil { return nil, err } rpcsLog.Infof("[sendmany] spend generated txid: %v", txid.String()) return &lnrpc.SendManyResponse{Txid: txid.String()}, nil } // NewAddress creates a new address under control of the local wallet. func (r *rpcServer) NewAddress(ctx context.Context, in *lnrpc.NewAddressRequest) (*lnrpc.NewAddressResponse, error) { r.server.lnwallet.KeyGenMtx.Lock() defer r.server.lnwallet.KeyGenMtx.Unlock() // Translate the gRPC proto address type to the wallet controller's // available address types. var addrType waddrmgr.AddressType switch in.Type { case lnrpc.NewAddressRequest_WITNESS_PUBKEY_HASH: addrType = waddrmgr.WitnessPubKey case lnrpc.NewAddressRequest_NESTED_PUBKEY_HASH: addrType = waddrmgr.NestedWitnessPubKey case lnrpc.NewAddressRequest_PUBKEY_HASH: addrType = waddrmgr.PubKeyHash } addr, err := r.server.lnwallet.NewAddress(defaultAccount, addrType) if err != nil { return nil, err } rpcsLog.Infof("[newaddress] addr=%v", addr.String()) return &lnrpc.NewAddressResponse{Address: addr.String()}, nil } // ConnectPeer attempts to establish a connection to a remote peer. func (r *rpcServer) ConnectPeer(ctx context.Context, in *lnrpc.ConnectPeerRequest) (*lnrpc.ConnectPeerResponse, error) { if in.Addr == nil { return nil, fmt.Errorf("need: lnc pubkeyhash@hostname") } idAtHost := fmt.Sprintf("%v@%v", in.Addr.PubKeyHash, in.Addr.Host) rpcsLog.Debugf("[connectpeer] peer=%v", idAtHost) peerAddr, err := lndc.LnAddrFromString(idAtHost) if err != nil { rpcsLog.Errorf("(connectpeer): error parsing ln addr: %v", err) return nil, err } peerID, err := r.server.ConnectToPeer(peerAddr) if err != nil { rpcsLog.Errorf("(connectpeer): error connecting to peer: %v", err) return nil, err } rpcsLog.Debugf("Connected to peer: %v", peerAddr.String()) return &lnrpc.ConnectPeerResponse{peerID}, nil } // OpenChannel attempts to open a singly funded channel specified in the // request to a remote peer. func (r *rpcServer) OpenChannel(in *lnrpc.OpenChannelRequest, updateStream lnrpc.Lightning_OpenChannelServer) error { rpcsLog.Tracef("[openchannel] request to peerid(%v) "+ "allocation(us=%v, them=%v) numconfs=%v", in.TargetPeerId, in.LocalFundingAmount, in.RemoteFundingAmount, in.NumConfs) localFundingAmt := btcutil.Amount(in.LocalFundingAmount) remoteFundingAmt := btcutil.Amount(in.RemoteFundingAmount) target := in.TargetPeerId numConfs := in.NumConfs respChan, errChan := r.server.OpenChannel(target, localFundingAmt, remoteFundingAmt, numConfs) if err := <-errChan; err != nil { rpcsLog.Errorf("unable to open channel to peerid(%v): %v", target, err) return err } var outpoint *wire.OutPoint select { case resp := <-respChan: outpoint = resp.chanPoint openUpdate := &lnrpc.ChannelOpenUpdate{ &lnrpc.ChannelPoint{ FundingTxid: outpoint.Hash[:], OutputIndex: outpoint.Index, }, } if err := updateStream.Send(openUpdate); err != nil { return err } case <-r.quit: return nil } rpcsLog.Tracef("[openchannel] success peerid(%v), ChannelPoint(%v)", in.TargetPeerId, outpoint) return nil } // CloseChannel attempts to close an active channel identified by its channel // point. The actions of this method can additionally be augmented to attempt // a force close after a timeout period in the case of an inactive peer. func (r *rpcServer) CloseChannel(in *lnrpc.CloseChannelRequest, updateStream lnrpc.Lightning_CloseChannelServer) error { index := in.ChannelPoint.OutputIndex txid, err := wire.NewShaHash(in.ChannelPoint.FundingTxid) if err != nil { rpcsLog.Errorf("[closechannel] invalid txid: %v", err) return err } targetChannelPoint := wire.NewOutPoint(txid, index) rpcsLog.Tracef("[closechannel] request for ChannelPoint(%v)", targetChannelPoint) respChan, errChan := r.server.CloseChannel(targetChannelPoint) if err := <-errChan; err != nil { rpcsLog.Errorf("Unable to close ChannelPoint(%v): %v", targetChannelPoint, err) return err } select { case resp := <-respChan: closeUpdate := &lnrpc.ChannelCloseUpdate{ ClosingTxid: resp.txid[:], Success: resp.success, } if err := updateStream.Send(closeUpdate); err != nil { return err } case <-r.quit: return nil } return nil } // GetInfo serves a request to the "getinfo" RPC call. This call returns // general information concerning the lightning node including it's LN ID, // identity address, and information concerning the number of open+pending // channels. func (r *rpcServer) GetInfo(ctx context.Context, in *lnrpc.GetInfoRequest) (*lnrpc.GetInfoResponse, error) { var activeChannels uint32 serverPeers := r.server.Peers() for _, serverPeer := range serverPeers { activeChannels += uint32(len(serverPeer.ChannelSnapshots())) } pendingChannels := r.server.fundingMgr.NumPendingChannels() idPub := r.server.identityPriv.PubKey().SerializeCompressed() idAddr, err := btcutil.NewAddressPubKeyHash(btcutil.Hash160(idPub), activeNetParams) if err != nil { return nil, err } return &lnrpc.GetInfoResponse{ LightningId: hex.EncodeToString(r.server.lightningID[:]), IdentityAddress: idAddr.String(), NumPendingChannels: pendingChannels, NumActiveChannels: activeChannels, NumPeers: uint32(len(serverPeers)), }, nil } // ListPeers returns a verbose listing of all currently active peers. func (r *rpcServer) ListPeers(ctx context.Context, in *lnrpc.ListPeersRequest) (*lnrpc.ListPeersResponse, error) { rpcsLog.Tracef("[listpeers] request") serverPeers := r.server.Peers() resp := &lnrpc.ListPeersResponse{ Peers: make([]*lnrpc.Peer, 0, len(serverPeers)), } for _, serverPeer := range serverPeers { // TODO(roasbeef): add a snapshot method which grabs peer read mtx lnID := hex.EncodeToString(serverPeer.lightningID[:]) peer := &lnrpc.Peer{ LightningId: lnID, PeerId: serverPeer.id, Address: serverPeer.conn.RemoteAddr().String(), Inbound: serverPeer.inbound, BytesRecv: atomic.LoadUint64(&serverPeer.bytesReceived), BytesSent: atomic.LoadUint64(&serverPeer.bytesSent), } chanSnapshots := serverPeer.ChannelSnapshots() peer.Channels = make([]*lnrpc.ActiveChannel, 0, len(chanSnapshots)) for _, chanSnapshot := range chanSnapshots { channel := &lnrpc.ActiveChannel{ RemoteId: lnID, ChannelPoint: chanSnapshot.ChannelPoint.String(), Capacity: int64(chanSnapshot.Capacity), LocalBalance: int64(chanSnapshot.LocalBalance), RemoteBalance: int64(chanSnapshot.RemoteBalance), NumUpdates: chanSnapshot.NumUpdates, } peer.Channels = append(peer.Channels, channel) } resp.Peers = append(resp.Peers, peer) } rpcsLog.Debugf("[listpeers] yielded %v peers", serverPeers) return resp, nil } // WalletBalance returns the sum of all confirmed unspent outputs under control // by the wallet. This method can be modified by having the request specify // only witness outputs should be factored into the final output sum. // TODO(roasbeef): split into total and confirmed/unconfirmed func (r *rpcServer) WalletBalance(ctx context.Context, in *lnrpc.WalletBalanceRequest) (*lnrpc.WalletBalanceResponse, error) { var balance float64 if in.WitnessOnly { witnessOutputs, err := r.server.lnwallet.ListUnspentWitness(1) if err != nil { return nil, err } // We need to convert from BTC to satoshi here otherwise, and // incorrect sum will be returned. var outputSum btcutil.Amount for _, witnessOutput := range witnessOutputs { outputSum += btcutil.Amount(witnessOutput.Amount * 1e8) } balance = outputSum.ToBTC() } else { // TODO(roasbeef): make num confs a param outputSum, err := r.server.lnwallet.CalculateBalance(1) if err != nil { return nil, err } balance = outputSum.ToBTC() } rpcsLog.Debugf("[walletbalance] balance=%v", balance) return &lnrpc.WalletBalanceResponse{balance}, nil } // PendingChannels returns a list of all the channels that are currently // considered "pending". A channel is pending if it has finished the funding // workflow and is waiting for confirmations for the funding txn, or is in the // process of closure, either initiated cooperatively or non-coopertively. func (r *rpcServer) PendingChannels(ctx context.Context, in *lnrpc.PendingChannelRequest) (*lnrpc.PendingChannelResponse, error) { both := in.Status == lnrpc.ChannelStatus_ALL includeOpen := (in.Status == lnrpc.ChannelStatus_OPENING) || both includeClose := (in.Status == lnrpc.ChannelStatus_CLOSING) || both rpcsLog.Debugf("[pendingchannels] %v", in.Status) var pendingChannels []*lnrpc.PendingChannelResponse_PendingChannel if includeOpen { pendingOpenChans := r.server.fundingMgr.PendingChannels() for _, pendingOpen := range pendingOpenChans { // TODO(roasbeef): add confirmation progress pendingChan := &lnrpc.PendingChannelResponse_PendingChannel{ PeerId: pendingOpen.peerId, LightningId: hex.EncodeToString(pendingOpen.lightningID[:]), ChannelPoint: pendingOpen.channelPoint.String(), Capacity: int64(pendingOpen.capacity), LocalBalance: int64(pendingOpen.localBalance), RemoteBalance: int64(pendingOpen.remoteBalance), Status: lnrpc.ChannelStatus_OPENING, } pendingChannels = append(pendingChannels, pendingChan) } } if includeClose { } return &lnrpc.PendingChannelResponse{ PendingChannels: pendingChannels, }, nil }