/* * Copyright (c) Jan Pochyla, SatoshiLabs * * Licensed under TREZOR License * see LICENSE file for details */ #define USB_WEBUSB_VENDOR_CODE 0x01 // arbitrary #define USB_WEBUSB_LANDING_PAGE 0x01 // arbitrary typedef struct __attribute__((packed)) { usb_interface_descriptor_t iface; usb_endpoint_descriptor_t ep_in; usb_endpoint_descriptor_t ep_out; } usb_webusb_descriptor_block_t; /* usb_webusb_info_t contains all information for setting up a WebUSB interface. All * passed pointers need to live at least until the interface is disabled * (usb_stop is called). */ typedef struct { uint8_t *rx_buffer; // With length of max_packet_len bytes uint8_t iface_num; // Address of this WebUSB interface uint8_t ep_in; // Address of IN endpoint (with the highest bit set) uint8_t ep_out; // Address of OUT endpoint uint8_t subclass; // usb_iface_subclass_t uint8_t protocol; // usb_iface_protocol_t uint8_t polling_interval; // In units of 1ms uint8_t max_packet_len; // Length of the biggest report and of rx_buffer } usb_webusb_info_t; /* usb_webusb_state_t encapsulates all state used by enabled WebUSB interface. It * needs to be completely initialized in usb_webusb_add and reset in * usb_webusb_class_init. See usb_webusb_info_t for details of the configuration * fields. */ typedef struct { const usb_webusb_descriptor_block_t *desc_block; uint8_t *rx_buffer; uint8_t ep_in; uint8_t ep_out; uint8_t max_packet_len; uint8_t alt_setting; // For SET_INTERFACE/GET_INTERFACE setup reqs uint8_t last_read_len; // Length of data read into rx_buffer uint8_t ep_in_is_idle; // Set to 1 after IN endpoint gets idle } usb_webusb_state_t; secbool __wur usb_webusb_add(const usb_webusb_info_t *webusb_info); secbool __wur usb_webusb_can_read(uint8_t iface_num); secbool __wur usb_webusb_can_write(uint8_t iface_num); int __wur usb_webusb_read(uint8_t iface_num, uint8_t *buf, uint32_t len); int __wur usb_webusb_write(uint8_t iface_num, const uint8_t *buf, uint32_t len); int __wur usb_webusb_read_select(uint32_t timeout); int __wur usb_webusb_read_blocking(uint8_t iface_num, uint8_t *buf, uint32_t len, int timeout); int __wur usb_webusb_write_blocking(uint8_t iface_num, const uint8_t *buf, uint32_t len, int timeout);