wiki/docs/intro.md

253 lines
4.1 KiB
Markdown
Raw Normal View History

2022-12-29 12:10:14 -08:00
---
sidebar_position: 1
---
2023-02-28 21:15:34 -08:00
# Welcome to FOME
2022-12-29 12:10:14 -08:00
2023-03-02 03:41:02 -08:00
Fome is a new project intending to deliver a user focused high feature ECU with open source hardware options and open firmware that give control back to the user, owner and driver.
2022-12-29 12:10:14 -08:00
2023-03-02 03:41:02 -08:00
As there are many complicated topics to cover we recommend that you start with the topics in the "intro" section to the left.
The first page to view should probably be the FOME overview.
2023-03-01 08:28:24 -08:00
## Index
2023-03-02 03:41:02 -08:00
### Intro - Start here
2023-03-01 08:28:24 -08:00
2023-03-02 03:41:02 -08:00
- Tips and Tricks
- First Checks, enabling and loading firmware
- Performing a safe first start
- Guide to ETB and VVT PIDs
- How to setup a board for first use
- How to test inputs and outputs
- FOME Overview
- Where to get firmware
- How to pick the right fueling method
- Which FOME hardware to choose
2023-03-01 08:28:24 -08:00
2023-03-01 08:42:12 -08:00
---
2023-03-02 03:41:02 -08:00
### Fundamentals of FOME tuning
2023-03-01 08:28:24 -08:00
2023-03-02 03:41:02 -08:00
- Air Fuel Ratio
- Acceleration Compensation
- What is Charge temperature estimation
- What is knock and why it matters
- Multi-dimensional mapping, what is it and how to benefit from it
- Spark timing, MBT and combustion
2023-03-01 08:28:24 -08:00
2023-03-01 08:42:12 -08:00
---
2023-03-02 03:41:02 -08:00
### Sensors and Gauges
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### Driver controls and feedback
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Accelerator pedal
- Battery Settings
- Brake pedal position and pressure sensor
- CAN gauge
- Clutch Pedal position and pressure sensing
- Rev Counter
- WBO2 Wideband Lambda
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### Fuel Sensors
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Flex-fuel sensor
- Fuel level
- Fuel pressure
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### General Sensors
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Analogue input settings
- Aux sensors
- Cam sensor
- Crank sensor
- ETB TPS
- Mass Air Flow Sensor
- TPS
- Turbo Speed Sensor
- VSS
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### Pressure sensors
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Barometric
- Manifold absolute pressure
- Oil Pressure
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### Temperature Sensors
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Aux temperature sensors
- Coolant temperature
- Intake Air temperature
2023-03-01 08:42:12 -08:00
---
2023-03-02 03:41:02 -08:00
### Limits and protections
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Boost Pressure Limit
- Coolant based RPM limit
- Fuel Pressure Compensation
- Minimum Oil Pressure Protection
- Rev limiters
2023-03-01 08:42:12 -08:00
---
### Basic Features
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- Bench test commands
- Boost control
- Cylinder Bank Selection
- Data Logging Settings
- Fan Control
- Fuel pump relay control
- GPPWM General purpose PWM
- Main Relay control
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
#### Cranking Control
2023-03-02 03:41:02 -08:00
- Advanced cranking features
- Cranking idle air control
- Cranking RPM limit
#### Cranking fuel
2023-03-02 03:41:02 -08:00
- Cranking Duration
- Cranking Fuel coolant multiplier
- Priming Pulse
#### Idle control
2023-03-02 03:41:02 -08:00
- Advanced Idle control
- Closed loop idle control
- Idle hardware
- Idle ignition table
- Idle settings
- Idle VE Table
- Open loop Idle control
2023-03-01 08:42:12 -08:00
---
2023-03-02 03:41:02 -08:00
### Advanced Features
2023-03-01 08:42:12 -08:00
2023-03-02 03:41:02 -08:00
- CAN settings
- Cylinder Angle Offset
- Knock control
- Launch Control
- LUA Scripting
- MAP sampling angle
- Multi-Dimensional Mapping
- Override Table Axis
- Smart Alternator
#### ETB
2023-03-02 03:41:02 -08:00
- ETB bias table
- ETB idle control
- ETB pedal target
- ETB PID and auto tune
- ETB Settings
- Redundant sensors
#### Fuel related
2023-03-02 03:41:02 -08:00
- Barometric pressure compensation
- Charge Temperature estimation
- Closed loop fueling
- Injection Phase settings
- Injector tester
2023-03-02 03:41:02 -08:00
#### GDI
2023-03-02 03:41:02 -08:00
- High pressure fuel pump settings
#### Rotary
2023-03-02 03:41:02 -08:00
- Rotary engine specific settings
#### Spark related
2023-03-02 03:41:02 -08:00
- Multispark
#### Variable cam timing
2023-03-02 03:41:02 -08:00
- On/Off VVT
- VVT PID
- VVT target tables
---
### Fuel
#### Acceleration
2023-03-02 03:41:02 -08:00
- TPS based
- Wall Wetting
#### Fuel Algorithms
2023-03-02 03:41:02 -08:00
- AlphaN
- Mass Air Flow
- Speed Density
2023-03-02 03:41:02 -08:00
#### Fuel Settings
2023-03-02 03:41:02 -08:00
- AFR settings
- Coolant Multiplier
- Per-Cylinder Fuel trim
- Deceleration Fuel Cut Off
- Flex Fuel
- Fuel Injection Mode
- TPS Multiplier
- Intake Air Temperature Multiplier
- Injector Deadtime settings
- Small Pulse width correction
---
### Hardware
#### Hardware Circuits
2023-03-02 03:41:02 -08:00
- High/Low circuits
- Highside circuits
- Lowside circuits
- Power supply circuits
- Discrete VR
- PT2001
2023-03-02 03:41:02 -08:00
- STM32 Compatibility
#### Hardware Details
2023-03-02 03:41:02 -08:00
- Base boards
- Brain boards
- CAN Gauge
- Low-Z Driver board
- Power Steering Controller
- Wideband Lambda module
---
### Ignition
#### Ignition Hardware
2023-03-02 03:41:02 -08:00
- Good ignition drivers
- Good ignition coils
- Smart vs Dumb coils
2023-03-01 20:48:39 -08:00
#### Ignition Settings
2023-03-02 03:41:02 -08:00
- Dwell
- Firing Order
- IAT ignition adder
- Ignition Mode
- Ignition Advance Table
- Ignition Coolant Correction
- Ignition Per-Cylinder trim
#### Ignition Types
2023-03-02 03:41:02 -08:00
- Individual Coils
- Sequential Ignition
- Wasted Spark
- Single Coil/Distributor