Sidebar order - now 2 folders use number prefix (#136)

* now 2 folders are using number prefix

* fix so the titles retain their desired formatting

docs/02-Intro-Start-Here/02-Which-Hardware-For-Me.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 2
----
-
 # Which FOME hardware to pick
 
 Currently there are a few sweet options for hardware, all have the same brain, but with different baseboards.

docs/02-Intro-Start-Here/03-Where-To-Get-Firmware.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 3
----
-
 # Where to get firmware
 
 FOME firmware releases are located [here](https://github.com/FOME-Tech/fome-fw/releases). You can download a release and install to the ECU with the console, or another way is to use TunerStudio (TS).

docs/02-Intro-Start-Here/04-HT-Updating-The-Firmware.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 4
----
-
 # Updating the firmware
 
 Updating the firmware is easy to do, however it is important to do it correctly to prevent errors or board

docs/02-Intro-Start-Here/05-HT-First-Start-Safely.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 5
----
-
 # Performing a safe first start
 
 page to outline the best practice for doing a first start

docs/02-Intro-Start-Here/06-HT-Set-Up.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 6
----
-
 # How to first setup a board for use
 
 Outputs, etc. Checking correct tune loaded

docs/02-Intro-Start-Here/07-HT-Test-IO.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 7
----
-
 # How to test inputs and outputs
 
 ## Input tests

docs/02-Intro-Start-Here/08-Tips-and-Tricks.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 8
----
-
 # Tips and Tricks
 
 ## Power cycle ECU

docs/02-Intro-Start-Here/09-Which-Fuel-Method-For-Me.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 9
----
-
 # How to pick a fuel method
 
 Use this to explain the pros and cons of each of the methods and which is more suitable for certain builds

docs/02-Intro-Start-Here/10-HT-PID-ETB-And-VVT.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 10
----
-
 # Guide to Tuning the ETB and VVT PIDs
 
 Let's discuss the ETB and VVT PID controls and some give techniques for tuning these loops.

docs/02-Intro-Start-Here/11-Miata-MX5-Quick-Start.md

@@ -1,7 +1,3 @@
----
-sidebar_position: 11
----
-
 # Miata MX5 Quick Start Guide
 
 So, you've just got yourself a shiny new BMM MX5 Miata ECU for your NA or NB, nice! If you're wondering how to install and get it running, you've come to the right place. This guide will cover how to install the ECU to the car with a Bosch LSU 4.9 wideband oxygen sensor and a mass air pressure (MAP) line. Installation of additional sensors or peripherals is covered in the advanced guides.

docs/03-Fundamentals-Of-Tuning/_category_.json

@@ -0,0 +1,7 @@
+{
+    "label": "Fundamentals of FOME tuning",
+    "link": {
+      "type": "generated-index",
+      "description": "The place to learn how to start tuning your FOME Hardware"
+    }
+  }

docs/Fundamentals-Of-Tuning/_category_.json

@@ -1,8 +0,0 @@
-{
-  "label": "Fundamentals of FOME tuning",
-  "position": 3,
-  "link": {
-    "type": "generated-index",
-    "description": "The place to learn how to start tuning your FOME Hardware"
-  }
-}