mirror of https://github.com/FOME-Tech/wiki.git
Create 01-Quick Start to a running engine.md (#103)
@blundar please chip in after merge Co-authored-by: Piotr Rogowski <piotr.rogowski0@gmail.com>
This commit is contained in:
parent
f2fbefb550
commit
e81d15a1fe
|
@ -0,0 +1,10 @@
|
|||
1. set VE table to 100% for loads 90kpa - 100kpa. set target AFR to something safe and THE SAME i.e. 0.8 lambda everywhere
|
||||
2. run engine hard, log AFR
|
||||
3. adjust injector size so that target AFR at peak torque (VE) is achieved
|
||||
4. adjust VE at high load in order to achieve uniform VE at WOT
|
||||
5. set entire table vertically (i.e. same RPM same VE) as WOT VE
|
||||
6. Pick a couple of part throttle load points. Adjust VE at part throttle load points to achieve target AFR. Apply same correction to all RPM points as chosen VE.
|
||||
7. Interpolate from chosen VE points vertically to WOT (or the next highest VE point you tuned)
|
||||
8. extrapolate trends to lowest thottle loads
|
||||
9. Set more reasonable target AFRs (i.e. 1.0 lambda at part throttle, 0.85 lambda at power desired)
|
||||
10. adjust injector latency to achieve reasonable idle AFRs
|
Loading…
Reference in New Issue