EPROM-EMU-NG/Hardware
Kris Sekula 4ed5ca1062
updated schematic pdf
2023-10-09 21:08:26 -07:00
..
1.9c
1.9d Added support for TLY 3100 DIP 28 probe 2022-07-09 23:10:00 -07:00
2.2c
2.2d updated schematic pdf 2023-10-09 21:08:26 -07:00
README.MD Support for TLY 3100 dip 28 probe added 2022-07-09 23:27:43 -07:00

README.MD

Jul-9-2022

As of hardware version 1.9d and 2.2d support for a cheaper 28 pin probe has been added to the PCB, so depending on the type of probe you end up using, connector J1 has to be soldered in accordingly, see the picture below:

EPROM EMULATOR NG

Feb-6-2022

At this point there are two differnt hardware version of the emulator, one using 2x 32kb SRAMs and the other using a single 128kb SRAM (64k usable). Firmware and software is exaclty the same for both.

EPROM EMULATOR NG