Ismael Gomez
a5b7dcdf16
Remove boost string ( #936 )
...
* Remove boost string
* Make sure that int/enc algos can be specified in capital case in the MME.
* Use == instead of compare for comparing strings with const chars
Co-authored-by: Pedro Alvarez <pedro.alvarez@softwareradiosystems.com>
2020-02-16 21:32:49 +01:00
Francisco Paisana
42449b079a
now the scell_activation CE is only for 1 octet. The 4 octet one is not yet supported.
2020-02-14 21:49:01 +00:00
Francisco Paisana
d831522692
addition of SCell Activation CE Cmd to scheduler and MAC
2020-02-14 21:49:01 +00:00
Francisco Paisana
838053e8f2
added SCell Activation CE to scheduler. Handling this CE in the MAC is still missing
2020-02-14 21:49:01 +00:00
Francisco Paisana
a0407dd6f7
created a lock guard for pthread rwlocks. This will avoid using gotos in many cases, and the RAII technique avoids many accidents.
2020-02-14 14:53:57 +00:00
Xavier Arteaga
385102fa2d
SRSENB: minor format, renaming and interface changes
2020-02-13 10:29:00 +01:00
Xavier Arteaga
bf4ecc8064
Fix srsenb PHY and unit/component tests
2020-02-13 10:29:00 +01:00
Xavier Arteaga
f9c3dd2748
more fixes in the srsenb
2020-02-13 10:29:00 +01:00
Xavier Arteaga
5dbc96458a
Sets PUCCH decode threshold as macro
2020-02-13 10:29:00 +01:00
Xavier Arteaga
231431f569
SRSENB: enabled CA PUCCH decode in eNb
2020-02-13 10:29:00 +01:00
Xavier Arteaga
73c63b10f2
Fix compilation of dummy classes
2020-02-13 10:29:00 +01:00
Xavier Arteaga
db9cd1683a
SRSENB: improved phy test
2020-02-13 10:29:00 +01:00
Xavier Arteaga
fd29944bf9
[Temporal] Disabled by default enb phy test
2020-02-13 10:29:00 +01:00
Xavier Arteaga
3f5c270fce
SRSENB: added initial component PHY test
2020-02-13 10:29:00 +01:00
Xavier Arteaga
40772eae19
SRSENB: UE PHY dedicated takes a flat configuration structure
2020-02-13 10:29:00 +01:00
Xavier Arteaga
35f4e5d69a
Initial PUCCH 1B with channel selection
2020-02-13 10:29:00 +01:00
Francisco Paisana
c9ac42f11d
renamed rlc pdu / mac sdu allocate functions, and added some comments describing what these functions do
2020-02-10 16:55:18 +00:00
Francisco Paisana
87038375d5
fixed the building of MAC SDUs in the scheduler. Now, we ensure there is always space for the MAC subheader and RLC header. The MAC subheader is correctly discounted from the remaining bytes in a TB.
2020-02-10 16:55:18 +00:00
Francisco Paisana
089f72d573
ensure minimum tbs. If it cant do it, increase mcs until it can.
2020-02-10 16:55:18 +00:00
Andre Puschmann
cccabdaf4f
removing unneeded install targets for static libs (reported by Filipe)
2020-02-10 17:38:42 +01:00
Francisco Paisana
c8fc0d91b3
changed the supported cc list to a vector of structs
2020-02-07 15:06:46 +00:00
Francisco Paisana
42b15c7bed
use common ue_cfg interface to set the ue antenna info
2020-02-07 15:06:46 +00:00
Francisco Paisana
5f557700f2
changed the sched::ue_cfg(...) function to allow diff configurations. The RRC now activates all carriers after rrc reconf complete
2020-02-07 15:06:46 +00:00
Francisco Paisana
b66bc3a6b0
create a sched_interface struct for antenna info dedicated. This way we remove the asn1 as a dependency in the scheduler
2020-02-07 15:06:46 +00:00
Francisco Paisana
88a22e7dbf
support cc cfg from rrc
2020-02-07 15:06:46 +00:00
Francisco Paisana
095d0cda5a
fix regs leak
2020-02-07 15:06:46 +00:00
Francisco Paisana
e86862611c
update the scheduler interfaces to accommodate the configuration of multiple carriers
2020-02-07 15:06:46 +00:00
Francisco Paisana
73c528793f
add interface changes to dummy classes and scheduler test
2020-02-07 15:06:46 +00:00
Francisco Paisana
2dc31ea440
added interface to configure multiple cells from the RRC
2020-02-07 15:06:46 +00:00
Pau Espin Pedrol
4949df257e
Proper shutdown on SIGHUP
...
If a process exits and has a controlling terminal, everything under
it gets a SIGHUP by the kernel. That's the case for instance when
running a srsUE over ssh with some specific parameters. As a result,
when the ssh client is killed, SIGHUP is sent to srsUE, which will be
killed immediatelly without proper release, which means in turn that log
buffers are not flushed.
Let's do proper shutdown when SIGHUP is received so that everyone can
get log files.
2020-02-06 16:19:40 +01:00
Andre Puschmann
ed179fd311
timers: rename value() to time_elapsed()
...
this seems to be better readable than value() since
we've sometimes confused it with the timeout value
2020-02-06 14:40:47 +01:00
Andre Puschmann
926f256afa
fix RLC dummy class that was missing suspend/resume
2020-02-03 16:26:15 +01:00
Andre Puschmann
a32d4ebf59
move PRACH config check into cfg parser
2020-02-03 16:26:15 +01:00
Andre Puschmann
179fd394b2
enb: add SRB2+DRB1 to scheduler AFTER receiving Reconfig Complete
...
this commit fixes and issue where, after receiving paging and the resulting
PRACH from the UE, the eNB would create DRB1 and already schedule DL traffic
on this bearer. However, since the UE has not received the reconfig message
yet, the DL traffic is dropped since DRB1 isn't set up yet.
the commit also does not reset the BSR state of the bearer inside MAC since
this caused to a stall of the received DL PDU. The value would initially be set to
a non-zero value (after receiving the DL PDU from EPC). But when the bearer
was (re-)introduced to MAC, it would reset the BSR to zero, and, since
MAC never polls RLC, the PDU wasn't sent down until the next PDU arrives
and sets the BSR to a non-zero value again.
2020-02-03 16:26:15 +01:00
Andre Puschmann
d3cb2eac83
add RLC suspend/resume to eNB interface
2020-02-03 16:26:15 +01:00
Andre Puschmann
369592544c
store last RRC Connection Reconfig with transaction identifier
2020-02-03 16:26:15 +01:00
Andre Puschmann
f999e256f9
add error handling for RRC msg packing in eNB
2020-02-03 16:26:15 +01:00
Andre Puschmann
ad304207b3
patch PRACH offset parameter for 6 PRB
...
the 6 PRB eNB requires a different PRACH offset than the default
value of 2 in the SIB1 example. In order to avoid having
to use a separate SIB config with just a single different value,
the patch patches the value to the only right configuration, if it's wrong.
It continues operation but still issues a warning so the user
can change it in the config.
2020-02-03 16:26:15 +01:00
Francisco Paisana
c19d033dbc
set SIB scheduling to debug mode
2020-01-29 17:38:46 +00:00
Francisco Paisana
c8cd12ac53
updated the test logging utils
2020-01-29 17:15:35 +00:00
Francisco Paisana
daf471be1f
moved test of pdsch collisions for separate test file
2020-01-29 17:15:35 +00:00
Francisco Paisana
c537d38650
separated sched tests based on output into a separate file. Added scheduler random tester to unit tests
2020-01-29 17:15:35 +00:00
Francisco Paisana
af0b80b0a7
fix test for prb==6 and accidental adaptive retx in UL
2020-01-28 17:15:23 +00:00
Francisco Paisana
a9b8c3fd55
fix msg3 prb limit for prb==6. It has to collide with PUCCH
2020-01-28 17:15:23 +00:00
Francisco Paisana
39fff9ed68
fix potential bug with grouping of RARs with same RA-RNTI but different prach_tti. The scheduler might not clear the old tti on time before the grouping.
2020-01-28 17:15:23 +00:00
Francisco Paisana
de195e9521
changed the RAR schedule to support the allocation of nof_grants lower than the current nof_grants in the queue with same ra-rnti
2020-01-28 17:15:23 +00:00
Francisco Paisana
e9ca6e3d52
fix rar size
2020-01-28 17:15:23 +00:00
Francisco Paisana
a74dcd947f
changed rar/msg3 scheduling to accommodate multiple rars per TTI
2020-01-28 17:15:23 +00:00
Francisco Paisana
dc782e514b
change the naming from tti --> sf for scheduling operations specific to a subframe
2020-01-28 17:15:23 +00:00
Xavier Arteaga
a6105a3020
SRSENB: made possible custom UL/DL frequencies for each carrier
2020-01-28 11:22:50 +01:00