585d7c923a
refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE
2020-10-12 13:42:46 +01:00
cae116932b
rewrite the rrc::leave_connected() function to better match the standard. The measurements should not stop while in RRC_IDLE.
2020-10-08 10:51:18 +01:00
5a4e71a6e4
Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover.
2020-10-08 09:46:34 +01:00
bcb422736c
Save and restore NH on handover and handover failure.
2020-10-08 09:46:34 +01:00
08e24d00af
Fix TA console trace
2020-10-08 09:21:00 +02:00
3eb525563a
Fix issue reading MNC length in USIM.
2020-10-07 10:04:50 +01:00
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
2020-10-07 09:58:23 +02:00
5e95fd4a43
ul_harq: reduce log level for new_grant_ul() if RNTI isn't found
...
this avoid logging a warning on UE shutdown if the MAC is already reset
but one of the PHY workers still decodes an UL grant for the old RTNI
21:30:29.254844 [RRC ] [I] Going RRC_IDLE
21:30:29.254848 [RRC ] [I] Proc "Go Idle" - Left connected state
21:30:29.259499 [PHY0] [I] [ 3865] Finished setting new PHY configuration cc_idx=0
21:30:29.259512 [PHY0] [I] [ 3865] Setting new PHY configuration cc_idx=0...
21:30:29.264190 [PHY0] [I] [ 3867] Finished setting new PHY configuration cc_idx=0
21:30:29.275036 [PHY1] [I] [ 3872] PHICH: hi=1, corr=1.0, I_lowest=1, n_dmrs=0, I_phich=0
21:30:29.275050 [MAC ] [W] [ 3872] Received grant for unknown rnti=0x46
2020-10-06 20:51:46 +02:00
362461329a
rrc: improve log message when detecting RLF
2020-10-06 20:51:46 +02:00
76c648106f
rrc: remove varMeasState for unknown neighbor cells
...
this fixes issue #1846 that appears to be related
to the enter/exit state for measurements that is kept
even after a cell disappears from the neighbor list
2020-10-06 16:28:09 +02:00
829dfc4e60
metrics_stdout: fix precision calculation for 100%
...
the precision for 100% was causing the default value of -1 which in turn
cause to print the full precision resulting in ugly stdout plots.
before:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k100.000000% 0.0 0.0 0.0 0.0 0%
after:
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 100% 0.0 0.0 0.0 0.0 0%
2020-10-05 22:42:04 +02:00
e72219789e
ul_harq: don't clear payload buffer during HARQ reset
...
this fixes #1791 which was caused by a race between
the PHY workers preparing a new UL-SCH PDU and the Stack resetting
the MAC, which in turn resets the HARQ processeses, which cleared
the buffer and set the length to zero.
Not explicitly clearing the buffer on a HARQ reset seems to be
fine since the PHY worker clears the buffer before starting to
pack a new PDU anyway.
2020-10-05 22:41:12 +02:00
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
2020-10-05 12:14:46 +01:00
8a917bdd06
fix RRC phy controller call to phy->set_config. Only the PCell was being configured
2020-10-05 12:08:16 +01:00
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
2020-10-02 18:50:29 +01:00
cfc77118d3
disable console print of scell activation command during handover
2020-10-02 18:50:29 +01:00
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
2020-10-02 17:53:02 +01:00
49ad1a4312
added unit test for meas cells
2020-10-02 17:53:02 +01:00
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
2020-10-02 17:53:02 +01:00
072b7be582
renamed rrc::cell_t to rrc::meas_cell
2020-10-02 17:53:02 +01:00
d02e8135fb
metrics_stdout: reset n_reports var after writing intermediate table header
2020-10-02 17:00:19 +02:00
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
2020-10-01 20:15:41 +02:00
6e0abd30dd
ue,phy_common: include Pcell PCI in cell measurements
...
this allows easier plotting in RRC when PHY cell
measurements already include the PCI
2020-10-01 20:15:41 +02:00
baf171d446
rrc: improve SR configuration logging
...
* move logging of SR max attempts into MAC logging
* log new MAC config whenever it is updated
2020-10-01 20:12:19 +02:00
bf7c2b800e
proc_sr: log error when trying to enable faulty SR config
2020-10-01 20:12:19 +02:00
04acc78c7d
metrics_test: add neighbor cell test
...
cleanup test and add neighbor cells so the displaying is tested
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal-------------Neighbour--DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 8 -33 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 8 -33 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
0 0 -10 74 0.0 0.0 0.0 0.0 200k 0% 0.0 0.0 0.0 0.0 0%
1 0 0.0 0.0 0.0 0.0 0.0 0.0 150k 50% 0.0 0.0 0.0 0.0 0%
2020-10-01 20:09:16 +02:00
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
2020-10-01 20:09:16 +02:00
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
2020-10-01 18:48:07 +01:00
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
2020-10-01 11:25:21 +01:00
edd5c50f9a
pass nas pdus after sending rrc reconf complete
2020-10-01 11:25:21 +01:00
cf89f4300a
fix ttcn3 to signal back to stack that a phy config has been completed
2020-10-01 11:25:21 +01:00
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
2020-10-01 11:25:21 +01:00
2416e274a7
fix rrc_meas_test. The phy now needs to signal back to the rrc that the phy config is complete
2020-10-01 11:25:21 +01:00
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
2020-10-01 11:25:21 +01:00
936e3b7bef
mac_test: add manual test for TC 7.1.4.6
2020-09-30 17:17:21 +02:00
5a9b1865e4
proc_bsr: fix typo
2020-09-30 17:17:21 +02:00
ef9d77c966
SRSUE: add PRACH config present field in PHY configuration structure
2020-09-30 17:10:48 +02:00
51b27fc255
Import latest srslog version ( #1796 )
...
* - Import latest srslog version.
- Adjusted the nas_test to create logs correctly.
- Remove timestamp formatting now that is provided by srslog.
2020-09-30 15:52:42 +02:00
924cc4f937
during cell selection, if the serving cell is ok, avoid calling serving cell configuration if the sibs are already acquired
2020-09-30 15:10:06 +02:00
4e88daae21
Set DCI unpacking errors to info ( #1781 )
2020-09-30 10:04:08 +02:00
dfeed52514
- Rename out_stream function to console.
2020-09-29 17:38:13 +02:00
62faef7c71
- Replaced all uses of the log::console method.
2020-09-29 17:38:13 +02:00
b3eb9651d6
disable cqi in scells during handover procedure
2020-09-29 12:10:42 +01:00
f4c7021a5f
Appy phy configuration to current_phy_cfg before sending to PHY after HO
2020-09-29 12:10:42 +01:00
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
2020-09-29 11:06:32 +01:00
af3ff5985e
removal of console print of last selected cell during the cell selection procedure.
2020-09-29 09:38:05 +01:00
c33e94fede
fix conformace 8_5_1_1 failure
2020-09-28 23:45:13 +01:00
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
2020-09-28 23:45:13 +01:00
f32d9f8322
ttcn3: call stop in UE dtor
...
fixes stop issue of TTCN3 DUT
2020-09-28 22:04:23 +02:00
d671e39c93
Fix SINR not correctly considering noise. Missed dBm conversion
2020-09-28 20:50:12 +02:00
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
2020-09-28 18:39:28 +01:00
b3bfe336a9
Make sure that remote address test has a ip mask
2020-09-28 16:08:28 +02:00
6ce5863f03
test/tft_test: Add a combined test for IPv6 packets
2020-09-28 16:08:28 +02:00
9ba8b62972
test/tft_test: Update filter test suite
...
The “IPv4 local address type” filter should be 9 bytes since it includes
not only the ip address, but also its subnet mask.
Quoting from 3GPP TS 24.008 10.5.6.12:
"""
For "IPv4 remote address type", the packet filter component value field
shall be encoded as a sequence of a four octet IPv4 address field and a
four octet IPv4 address mask field. The IPv4 address field shall be
transmitted first. For "IPv4 local address type", the packet filter
component value field shall be encoded as defined for "IPv4 remote
address type".
"""
Same for the ToS which also includes a 1 byte mask value
2020-09-28 16:08:28 +02:00
5783c01cbb
tf_packet_filter: Improve support for the different filter types
2020-09-28 16:08:28 +02:00
bb691f0cbe
Fix priority order in BSR trigger. Was not being triggered if SRB2 data was pending in the buffer ( #1771 )
2020-09-25 21:02:06 +02:00
8c30822350
Fix bug in update_measurements() not reporting in_sync in single carrier
2020-09-25 15:39:15 +02:00
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
2020-09-25 13:03:50 +01:00
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
2020-09-24 22:26:05 +02:00
76bfc78147
Fix issues with Sounding-RS ( #1761 )
...
* Fix deadlock caused by update_measurements calling in_sync
* Fix overlapping SRS condition
* Do not use shortened PUSCH in transmissions and retx from RAR
* Revert "Fix deadlock caused by update_measurements calling in_sync"
This reverts commit f58c8c8c766f8f95baa3a3bf8287d8e25b2057ba.
2020-09-24 22:25:24 +02:00
2d321231df
fix reest proc. The reest proc state has to be set before launching the procedure, because the procedure can complete immediately on launch call
2020-09-24 14:00:31 +01:00
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
2020-09-24 13:30:08 +01:00
81ab4c1a65
make sure ho procedure waits for t304 expiry in all cases
2020-09-24 10:19:13 +01:00
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
2020-09-23 21:46:03 +02:00
cf89d6645b
add comments explaining each function of the reest procedure
2020-09-23 14:59:38 +01:00
d068d594af
implemented rrc reestablishment procedure part after sending reest request
2020-09-23 14:59:38 +01:00
7d6c9a1751
Add cause and cell pci to reestablishment console message
2020-09-23 14:59:38 +01:00
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
2020-09-23 14:59:38 +01:00
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
2020-09-22 21:47:16 +02:00
399b986d0b
Fix deadlock caused by update_measurements calling in_sync ( #1760 )
2020-09-22 18:25:12 +02:00
eb370642ab
verify cell selection observer is set before calling it
2020-09-22 17:09:18 +01:00
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
2020-09-22 17:09:18 +01:00
f0d651ae8e
- Fixed a leak in the MME class not releasing the static byte buffer pool.
...
- Now the pool gets destroyed on program exit using a unique_ptr.
- Removed manual cleanup() calls in all the code base to free the pool instance.
2020-09-22 18:00:50 +02:00
5968157ea5
Protect better the access to shared variables in phy_common and metrics ( #1750 )
2020-09-22 14:32:08 +02:00
eeb2b904aa
ue,rach: fix failing RACH proc when Msg3 grant RNTI matches current CRNTI
...
this was preventing that the Temp-CRNTI used in the RAR to be identical
to the currently configured C-RNTI of the UE.
The issue simply was that the RACH procedure was declared successful too
early, even before the Msg3 UL grant was filled with the Msg3 content.
The patch moves the logic that detects the successful completion of
the RACH procedure below the Msg3 packing.
2020-09-22 14:03:39 +02:00
a36f9bddc2
ttcn3: use RNTI values in RACH provided by tester
...
this patch extends the SS to use the C-RNTI and Temp CRNTI values
provided by the tester for RAR and Msg3.
2020-09-22 14:03:39 +02:00
e14cb4b405
- Fix a missing thread join in the phy which caused a memory leak.
2020-09-22 09:17:01 +02:00
5acc1c9a73
- Cleaned up style in the PRACH class:
...
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
2020-09-21 09:50:20 +02:00
b6bbe8761a
- Remove left over printf.
2020-09-21 09:50:20 +02:00
79f5b62551
- Calculate PRACH buffers on the fly when required instead of pregenerating all of them.
2020-09-21 09:50:20 +02:00
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
2020-09-21 09:27:07 +02:00
d90de639e5
ttcn3_syssim: continue when epoll returns -1
...
this allows to debug and step in the SS
2020-09-21 09:27:07 +02:00
1b266257a1
ttcn3_phy: improve logging of cell measurements
2020-09-21 09:27:07 +02:00
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
2020-09-21 09:27:07 +02:00
97133894e6
the Ocs value used in the measReport triggering decision was not being set correctly. The enum of the cell individual offset in the measCfg was being cast to an int and stored. Instead what we want is to store the actual offset value using the ASN1 enum->number lookup table.
2020-09-18 13:17:32 +01:00
44c2412be2
SRSUE: silent PUSCH encoding error by dropping invalid grant
2020-09-17 22:39:56 +02:00
739c0c5c00
altered plmn search procedure handling of failed cell searches. If a cell search procedure fails due to inability to select a cell or acquire SIB1, the plmn search carries on for other frequencies.
2020-09-17 16:43:58 +01:00
3088cdbb0f
ttcn3: fix uncaught exception in SS
...
fix accessing child element in parsed Json without checking
its existence.
2020-09-14 21:20:59 +02:00
8df388ba3e
usim: fix typo in log
2020-09-14 21:20:59 +02:00
3e824f6370
ttcn3: convert TTI action vector to queue
...
this makes sures queued events are executed FIFO
2020-09-14 21:20:59 +02:00
624c8142ad
ttcn3: refactor cell handling in SS
...
this rather large patch changes the way cells are handled in the SS.
It moves RLC and PDCP entities to the cell map of the SS, such that each cell
has its own entities. This allows to support HO operation, for example,
in which two cells need to send SRB messages.
It also extends most of the syssim interface to include the cell name
in all commands so they can be applied on the specified cell only.
2020-09-14 21:20:59 +02:00
4650a620d9
ttcn3: refactor cell search and selection in TTCN3 PHY
...
- make sure only suitable cells are reported/selected
2020-09-14 21:20:59 +02:00
973de8f78d
ttcn3_dut: block OS signals before starting log backend
...
this prevents the backend thread from handling the signals. they
are only handled by epoll running in the main thread.
this fixes #1713
2020-09-14 21:20:00 +02:00
b397878d25
Fix comments in ue.conf
2020-09-14 16:54:47 +02:00
c178e362b8
- Rewrite log management so that a log sink can be swapped for each testcase.
2020-09-10 17:14:51 +02:00
5e8a4c898d
Bring back the circular array object. ( #1712 )
2020-09-09 17:16:47 +02:00
52355024e7
SRSUE PHY: move mutex lock to cc worker and unlock for stack calls
2020-09-04 14:01:25 +02:00
4c1d3ef7e8
Fix implementation of Random Access problem ( #1689 )
...
* Fix implementation of Random Access problem
* Apply AS activated condition on RLF before calling Reestablishment
2020-09-04 13:13:42 +02:00
f49fbd6d02
Fix the order of HO/reest measurement actions ( #1696 )
2020-09-04 12:18:12 +02:00
c16ac6c890
ue_stack: only push sync event to event queue is stack is still running
...
stopping the UE in ZMQ mode caused a dead-lock because the Stack was
stopped before the PHY causing the sync queue to overflow. Since we
use a queue-length of 1 in ZMQ, mode, the PHY sync thread was blocking to
push a new sync event while the stack thread was already stopped.
this patch makes sure no new sync events are queued after the stack has
been terminated.
2020-09-03 18:28:49 +02:00
Francisco Paisana
Pedro Alvarez
Xavier Arteaga
Andre Puschmann
faluco
Ismael Gomez
faluco
Sylvain Munaut