##################################################################### # srsEPC configuration file ##################################################################### ##################################################################### # MBMS-GW configuration # # name: MBMS-GW name # sgi_mb_if_addr: SGi-mb interface IP address # m1u_addr: Multicast group for eNBs (FIXME this should be setup with M2/M3) # ##################################################################### [mbms_gw] name = srsmbmsgw01 sgi_mb_if_addr = 172.16.0.254 sgi_mb_if_mask = 255.255.255.255 m1u_multi_addr = 239.255.0.1 m1u_multi_if = 127.0.1.200 m1u_multi_ttl = 1 #################################################################### # Log configuration # # Log levels can be set for individual layers. "all_level" sets log # level for all layers unless otherwise configured. # Format: e.g. s1ap_level = info # # In the same way, packet hex dumps can be limited for each level. # "all_hex_limit" sets the hex limit for all layers unless otherwise # configured. # Format: e.g. s1ap_hex_limit = 32 # # Logging layers: mbms_gw, all # Logging levels: debug, info, warning, error, none # # filename: File path to use for log output. Can be set to stdout # to print logs to standard output ##################################################################### [log] all_level = debug all_hex_limit = 32 filename = /tmp/mbms.log