Update README.md
This commit is contained in:
parent
6c873a1405
commit
4d39a01090
|
@ -9,13 +9,13 @@ Arduino based 2Step Launch Control Module similar to Bee*R for Honda/Acura
|
|||
# Parts List
|
||||
- 1x Arduino Nano V3 5V 16mhz atmega328p
|
||||
- 1x 74HC00 Quad 2-input NAND gate (or 74LVC1G00 for a Single gate rather than a Quad gate)
|
||||
- 2x 2N4401 transistors
|
||||
- 2x 2N4401 transistors (2N2222/2N3904 can be used)
|
||||
- 6x 1K Ohms resistors
|
||||
- 1x 1 to 10 Ohm resistors (can be replaced with a jumper or '0ohm' directly but a resistor make the circuit safer!)
|
||||
- 2x B10K Potentiometer 0931
|
||||
- 2x 2mm to 5mm Leds
|
||||
- 1x 7805/78M05 5v voltage regulator
|
||||
- 1x 100nF capacitor (104)
|
||||
- 2x 100nF capacitor (104)
|
||||
- 1x Diode (minimum of 20v), can be 1N4002, 1N4004, 1N4148, etc..
|
||||
|
||||
# Installation
|
||||
|
|
Loading…
Reference in New Issue