BMBurner

BMBurner is a Arduino based EPROM Programmer that can Read/Write/Verify Chips (27C256, SST 27SF512, W27E512, etc...)

BUY BMBurner

Downloads Links :

• Windows Tool (BMBurner.exe) to Read/Write/Verify Chips
• Firmware Updating Tool to Update the BMBurner Firmware

Downloads Drivers Links :

• Driver for FTDI Chipset (BMBurner V1.1 and Moates) : FTDI Driver
• Driver for CH340 Chipset (BMBurner V1.0, BMBurner V2.X) : CH340 Driver

How to Update the BMBurner Firmware (V2.X ONLY):

• Download and Install the Firmware Updating Tool if not already done

1. Open the Firmware Updating Tool
2. Select the COM Port of your BMBurner (and the baudrate, default is 921600)
3. Clic on 'Connect Device' button to connect to your BMBurner
4. Clic on the 'Update Firmware' button!

Compatible Chips List (for BMBurner V2.X):

• 27C256 (Read-Only)
• 27C512 (Read-Only)
• 27SF256 (Read-Only)
• 27SF512
• 27SF512 (Fake with 70ns access/write time)
• 29C256
• W27C512
• W27E512
• DS1230
• 61256/61C256
• 62256/62C256

BMBurner Windows Tool Functions :

*** Image may differ from the updated tool ***

• Load File to Buffer
• Save Buffer to File
• Read Chip
• Program Chip
• Verify Chip
• Blank Check
• Erase Chip
• Edit Reading/Writing Chip addressing
• Edit Reading/Writing Buffer addressing
• Much Mores...

Serial Protocol Functions :

Command	Receice Buffer	Description
'C' + R + 'S' + "MSB" + "LSB" + "CS"	"B1" + "B2" + "...BX" + "CS"	Reads 'S' bytes(S=Size, S=0 for 256bytes) from the EEPROM at address "MSB" + "LSB" (C=Chip, C=2 for 27C256, etc, C=5 for 27SF512 SST, etc)
'C' + W + 'S' + "MSB" + "LSB" + "B1" + "B2" + "..." + "CS"	"O" (0x4F)	Writes 'S' bytes(S=Size, S=0 for 256bytes) from the EEPROM at address "MSB" + "LSB" (C=Chip, C=2 for 27C256, etc, C=5 for 27SF512 SST, etc)
5 + E + "CS"	"O" (0x4F)	Erase all the data on Chip Type 5 (SST)
V + CS (V+V)	"B1" + "B2" + "B3"	Prints the version bytes of the BMBurner PCB Board for Moates Compatibility(Ex:V5.1.0)
F + CS (F+F)	"B1" + "B2"	Prints the firmware bytes of the BMBurner PCB Board(Ex:V2.0)
G + CS (G+G)	"B1" + "B2"	Prints the BMBurner Starting baudrate (Ex:'B1=1,baud 921.6k', 'B1=2,baud 9600', 'B1=3,baud 115200')
S + 0 + S	"O" (0x4F)	Switch the internal baudrate on the BMBurner to 921600 for Moates Compatibility
S + 7 + S	"O" (0x4F)	Switch the internal baudrate on the BMBurner to 115600 for Moates Compatibility
A + 'N'	"O" (0x4F)	Change the chip AccessTime to 'N'ns (Ex:N=70 for 70ns AccessTime)

Donations :

You can donate to me using This Link.

Pictures BMBurner V1.1 :

Pictures BMBurner V1.0 :