BMBurner

BMBurner is a Arduino based EPROM Programmer that can Read/Write/Verify Chips (27C256 and SST 27SF512)

Downloads Links :

• Windows Tool (BMBurner.exe) to Read/Write/Verify Chips
• Project Files to Update BMBurner or to Create your own

Downloads Drivers Links :

• Driver for FTDI Chipset (BMBurner V1.1 and Moates) : FTDI Driver
• Driver for CH340 Chipset (BMBurner V1.0) : CH340 Driver

How to Update the BMBurner Firmware (V1.0 ONLY):

• Download and Install the CH340 Driver if not already done
• Download and Install the Arduino Software if not already done

1. Download and Open the Project Files of BMBurner
2. Copy the folder 'Arduino_BMBurn' into 'Documents\Arduino\libraries'

• (exemple : C:\Users\YOUR_USERNAME\Documents\Arduino\libraries\Arduino_BMBurn)

3. Open Arduino Software
4. Load the Project 'Arduino_BMBurn'
5. Select 'Arduino Nano' in 'Tools/Board'
6. Select 'Atmega328P' in 'Tools/Processor'
7. Select the BMBurner Serial Port in 'Tools/Port'
8. Clic on Upload!

Compatible Chips List (not all chips are tested):

• 27C32 (Read-Only)
• 2732A (Read-Only)
• 27C64 (Read-Only)
• 27C128 (Read-Only)
• 27C256 (Read-Only)
• 27C512 (Read-Only)
• 27SF256 (Read-Only)
• 27SF512
• 28C64
• 28C256
• 29C256
• W27C512
• W27E512

BMBurner Windows Tool Functions :

*** Image may differ from the updated tool ***

• Load File to Buffer
• Save Buffer to File
• Read Chip
• Program Chip
• Verify Chip
• Blank Check
• Erase Chip
• Edit Reading/Writing Chip addressing
• Edit Reading/Writing Buffer addressing
• Much Mores...

if you want to make your own

Wiring Diagram V1.0 :

Wiring Diagram V1.1 :

Requirements 'ALL VERSIONS' :

• Windows XP|Vista|7|8|10 (.net framework 3.5 installed)
• 1x 28Pin ZIF Socket
• 2x 1K Resistors
• 6x 22K Resistors
• 2x 74HC595 (or other replacement)
• 2x 2N4401 (or other replacement)
• 2x 2N3906 (or other replacement)
• 1x Step-Up Converter (usually input 5v and output 12v, it produce 12v out of a 5v signal)

Requirements 'V1.0' :

• 1x Arduino Nano/Uno (any arduino with atmega328 as microcontroller should work with same pinouts)
• 3x 0.1uF Capacitors

Requirements 'V1.1' :

The BMBurner V1.1 require the Arduino Library MiniCore to run on a crystal oscillator of 14.7mHz

• 1x Atmega328P 5V
• 1x 14.7456 mHz ocsillator crystal clock
• 2x 22pF Capacitors
• 1x FT232RL Adapter (FTDI/RS232 to USB)
• 1x 10k Resistor
• 4x 0.1uF Capacitors

Donations :

You can donate to me using This Link.