8b7f0c345b
Add a loops/rev counter in TS
2018-02-05 12:44:38 +11:00
dfa48ed250
Fix for rare overflow issue that could cause an incorrect pulse width at very low RPM (<200rpm)
2018-02-05 09:39:46 +11:00
e1f2b35081
migrated the flex fuel help to the curve editors. fixed bonehead flexEnabled ini mistake
2018-01-21 15:19:04 -06:00
b5c56495e9
Merge branch 'flextable' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2018-01-21 14:55:47 -06:00
9369ec73d8
Merge branch 'reset-lock' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-21 14:32:51 -06:00
8e789d4644
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-20 18:16:19 -06:00
74fefba9c2
significantly improved the flex settings dialog
2018-01-20 18:00:56 -06:00
23862103e5
extremely rough flex table editors. added flexBoostCorrection to currentStatus. shortened flex correction table names. gave each flex table its own set of eth% bins. fixed the incredibly broken EEPROM update code.
2018-01-20 16:33:14 -06:00
264090863d
Merge pull request #118 from ConnerMcLaughlin/master
...
Launch Control TPS II
2018-01-21 07:18:51 +11:00
929756b63a
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# .gitignore
# reference/speeduino.ini
# speeduino/globals.h
2018-01-19 22:24:02 -06:00
2350d5d785
Table-based flex fuel corrections
...
Changed the linear low / high flex fuel correction method to a table2D-based one.
2018-01-19 21:25:01 -06:00
d07d20ffb8
ini spec version bump to maximum supported by the current stable TunerStudio. removed debug code from comms.ino. updated ini file so that only appropriate options will be shown based on whether the connected Speeduino is using the custom firmware.
2018-01-16 20:02:04 -06:00
de45a0f506
Wiki image for Miata 9905 pattern
2018-01-17 09:39:19 +11:00
45d6780835
Merge pull request #120 from ConnerMcLaughlin/36-2+3
...
Initial commit for missing tooth secondary
2018-01-16 16:47:07 +11:00
b6096329d8
cam4minus1 var is now trigPatternSec
...
All the instances of the variable name cam4minus1 is changed to trigPatternSec
2018-01-15 20:38:37 -06:00
f0ce5a9202
Updated 36-2-2-2 signal image
2018-01-15 16:45:06 +11:00
dc0e1c7b88
Correction of choices for cam4minus1 var
...
In speeduino.ini you have to explictly show an INVALID placeholder for all the choices a constant can have. There were only 130 for cam4minus1. The numer was increased to 254.
2018-01-14 21:21:07 -06:00
52701e98ad
Initial commit for missing tooth secondary
...
This also includes setups that have Toyota 36-2+3 trigger wheels to work.
2018-01-14 20:23:25 -06:00
124c0d51da
Launch Control TPS II
...
Adding TPS limit on launch control
2018-01-14 17:42:38 -06:00
bd303bd767
replaced accidental (and misnamed) copy of arduino-dfu firmware with the correct speeduino arduino-usbserial one
2018-01-14 11:49:16 -06:00
27641514f4
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
...
# Conflicts:
# reference/speeduino.ini
2018-01-14 11:29:29 -06:00
35267f21ed
Updated bootloader that sends its version to Speeduino when TS connects
2018-01-13 09:06:12 -06:00
85c600a992
Wiki image for 36-2-2-2
2018-01-14 00:25:18 +11:00
2819adb865
Custom bootloader recognition
...
Added a new serial command that allows a custom 16u2 firmware to let the speeduino know about itself. After issuing a `, the speeduino will expect one more byte indicating the capabilities level of the custom firmware (only 1 for now).
2018-01-12 21:37:21 -06:00
dd9941ce5d
Introduce end-of-line normalization
2018-01-12 14:04:43 +11:00
819b3a1dc9
Updated parts for v4 VR conditioner
2018-01-12 13:55:27 +11:00
b83f24d253
Minor updates to adapters fzz files
2018-01-12 13:54:56 +11:00
d49d8f5fb7
SpeedyMAP initial work on RPM detection
2018-01-12 13:54:31 +11:00
c8badf88b8
Update to v0.4.4 BOM to replace EOL part
2018-01-12 13:53:43 +11:00
2c5ab994f5
Mostly complete SpeedyMAP firmware
2018-01-10 22:37:31 +11:00
81d8ccd358
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-09 18:20:47 -06:00
6c8e238697
January dev signature
2018-01-10 00:11:57 +11:00
93a1ae989f
Initial rough work on Speedy MAP
2018-01-09 08:46:46 +11:00
3db8319320
Atmega16u2 firmware that supports reset control
...
With this firmware installed, auto reset on DTR will only work if PINB7 is held LOW.
2018-01-07 16:50:40 -06:00
43f0d35839
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-07 16:22:55 -06:00
ae8ea08d41
Reset Control
...
Changed reset lock feature to a more general "reset control" feature. Moved reset control settings to the general Settings menu. added a serial U command that will halt comms and set the control pin low when another byte is received to facilitate reset control for devices that lack an AtmegaXXu2 usb controller. Improved context help for reset control. Corrected reset lock status indicator on / off labels. moved reset control setup to utils.ino.
2018-01-07 16:22:18 -06:00
f474a95dc5
December 2017 signature and base tunes
2018-01-03 21:52:25 +11:00
9f53002b9d
Adjust injector setting priority so that sequential will override the Simultaneous/Alternating option
2018-01-03 17:27:22 +11:00
03e6c2d476
Software controlled auto-reset prevention
...
This feature enables the Speeduino to set a pin high that will tell the Arduino's 8U2/16U2 firmware not to reset on new serial connections. This requires a slightly modified firmware for the 8U2/16U2 that will only reset on DTR when PB7 is also held low.
2018-01-01 15:39:43 -06:00
507ebc83d6
Files for v0.3.7 board (Adds bluetooth header)
2017-12-30 08:35:20 +11:00
8feb7ae521
Fix typo in ini
2017-12-21 23:06:09 +11:00
38dfb2d8f6
Fix for timing bug on Miata 99-05 pattern
2017-12-21 13:30:45 +11:00
c93f735036
Staging wiki images
2017-12-18 08:48:00 +11:00
36c08d42cc
Initial layout work for 36-2-2-2 decoder
2017-12-15 16:38:17 +11:00
8fe7ff66a9
December dev signature
2017-12-15 16:23:56 +11:00
aebe4d2719
November signature and base tunes
2017-12-10 17:21:55 +11:00
98ea973a80
Add individual pulse widths to the comms output
2017-12-07 11:42:44 +11:00
7685316703
Files for the v3 VR conditioner
2017-12-05 13:02:39 +11:00
703d78ffe5
Remove unused parts from the Beta 2 PNP BOM
2017-12-05 13:02:18 +11:00
1e432514f9
Allow separate bars calibration
2017-11-28 10:09:54 +11:00
Josh Stewart
Murray
ConnerMcLaughlin