6ef3a3d5d5
[Arduino 1.6.6+ Required!] Utilise the included libs without needing to copy or move them.
2016-01-05 23:02:24 +11:00
be51ddf852
Rename injector variable to better reflect its purpose
2016-01-05 08:00:47 +11:00
2c747e5459
Initial commit of IAT based timing retard
2016-01-03 07:40:27 +11:00
9a6d6dba00
Clean up some of the on/off functions for injectors and coils
2016-01-02 08:46:40 +11:00
3b3541698e
Fix for missing ignition signals on channels 3 and 4
2015-12-31 16:25:57 +11:00
9545550f18
Fix for TPS reading fluctuation if ADC value fell outside of the calibration range
2015-12-27 22:35:20 +11:00
0eb1e8c967
Improvements to Audi 135 decoder - Tested against stim.
2015-12-22 16:55:49 +11:00
63588f8000
Minor fixes for fuel pump priming
2015-12-22 15:30:00 +11:00
65f430a930
Add fuel pump priming
2015-12-21 15:45:52 +11:00
e00de31a37
Allow for 0ms injector pulse if VE lookup is 0
2015-12-15 21:05:29 +11:00
6472f8857e
Initial commit of Audi 135 decoder
2015-12-15 16:06:42 +11:00
bc92bcad0f
Fix missing MAP reset in new error checking code
2015-12-13 16:53:36 +11:00
91a0649600
Experimental MAP error checking, tracking and filtering
2015-12-13 09:24:08 +11:00
5d59af7e61
Apply ignition schedule improvements to ch3/4 channels
2015-12-09 23:00:52 +11:00
23f10a918a
Fix to low speed / small advance timing bug (CH 1/2 only)
2015-12-09 12:25:46 +11:00
c54583f42c
Add per decoder flagging for second derive prediction
2015-11-29 19:53:41 +11:00
9b69a583c2
Performance improvements (Div operations in getCrankAngle)
2015-11-25 16:55:36 +11:00
c779f42d9e
Potential fix for erratic spark behaviour
2015-11-25 15:39:52 +11:00
2d4ce39605
Only perform 2nd derive calcs once per tooth
2015-11-25 15:39:52 +11:00
aee19dd5e2
Continued WIP 2nd derivative crank angle prediction
2015-11-14 22:01:05 +11:00
2517d97555
Move toothDeltaT out of interrupts
2015-11-08 22:56:54 +11:00
746753a4da
Prevent fuel pump coming back on after 72 minute overflow
2015-11-07 22:20:29 +11:00
4191e6e865
Actually return a value when using the higher resolution cranking RPM
2015-11-04 21:49:37 +11:00
68f0ba8cfe
Amending some decoders to work with 1st derive prediction
2015-11-03 21:57:12 +11:00
4b84e8bab8
Change for Jeep 2000 trigger to work correctly with cam tooth
2015-11-03 21:39:32 +11:00
d992eb405a
Experimental 1st deriv crank angle estimator
2015-11-03 21:22:33 +11:00
c74db90249
Fix wasted COP spark mode
2015-10-30 20:50:15 +11:00
ed02ba79f7
Better tuned tooth logger
2015-10-30 20:35:45 +11:00
7ea2757c95
Code optimisations, mostly small
2015-10-30 20:11:16 +11:00
8975698cdf
Continued work on spark output modes
2015-10-29 06:13:16 +11:00
4c0585f902
Improvements to tooth logger
2015-10-25 22:13:58 +11:00
6fb864b0bd
rpmDOT added
2015-10-21 22:19:15 +11:00
fe1d58cd38
Basics of launch control in place
2015-10-18 23:20:16 +11:00
fb8c93da10
IAT density correction re-added
...
No idea where this had disappeared to
2015-10-18 09:29:41 +11:00
fda74b22cc
Initial work on MAP sampling options
2015-10-09 12:42:09 +11:00
9dd0908d45
Minor safety checks added
2015-10-09 12:08:14 +11:00
57607b8ac0
Experimental fast digital IO work
2015-09-30 14:47:48 +10:00
85d1d55bc6
Fix boost and vvt eeprom offsets
2015-09-28 21:57:27 +10:00
ea1a625c00
Missed file from last commit
2015-09-28 12:29:20 +10:00
4d4cd29a19
Complete but untested boost and vvt
2015-09-27 16:41:07 +10:00
d5855eb7cd
Further work on the boost and vvt controls
2015-09-27 09:14:29 +10:00
e1f2f42107
Initial boost and vvt page work
2015-09-25 06:24:40 +10:00
2d0077f492
Re-add priming pulses
2015-09-19 10:24:15 +10:00
f8fd0f9692
Allow for dynamically sized 3d tables
2015-09-18 15:06:21 +10:00
d2516460d3
Correct logic on the soft rev limiter
2015-09-18 11:18:56 +10:00
e7743fb001
Fix MAP scaling error
2015-09-18 09:41:10 +10:00
edcc52f7cc
Initial MAP sensor calibration work
2015-09-16 22:23:06 +10:00
b0ecc67518
Add idleControl call back in
2015-09-16 06:12:35 +10:00
12f11cc1a3
added second o2 support
2015-09-14 00:16:46 +01:00
9ac2903cf1
Off by one on skip revolutions
2015-09-13 21:16:10 +10:00
acf0d47c0d
Minor fixes
2015-09-12 17:41:30 +10:00
a789f7bbe6
Dual wheel decoder
2015-09-08 16:46:42 +10:00
7f67ac3b16
Fix for pwLimit overflow
2015-08-23 18:04:53 +10:00
60ffd8366f
Low RPM timing fix
2015-08-23 11:36:18 +10:00
ae7b355c3e
Fix timer buffer overflow at low RPM
2015-08-22 16:24:49 +10:00
4c669423b4
Fix for fuel pump not coming on
2015-08-22 08:59:26 +10:00
93e88d4581
Confirmed polarity of 4g63 trigger.
2015-07-31 13:50:29 +10:00
eb92924282
Minor corrections for 4g63 trigger
2015-07-31 13:11:25 +10:00
5b103b4959
Allow for swapped polarity on 4G63 decoder
2015-07-27 21:59:03 +10:00
322f0f6795
Complete but untested 4G63 / Miata decoder
2015-07-26 21:49:22 +10:00
359288efb7
Jeep 2000 decoder added
2015-07-24 14:07:05 +10:00
9c557ecffe
GM 24X decoder added
2015-07-13 14:22:05 +10:00
57bb876964
Honour the alternating vs simultaneous injection option
2015-07-12 20:35:25 +10:00
c614900fd8
Initial commit of GM7X decoder
2015-06-14 22:11:10 +10:00
dd08d52db2
Add duty cycle limit option
2015-06-12 13:18:36 +10:00
c8a7684d5a
Actually fix the TPS from the last commit
2015-06-09 23:43:51 +10:00
ade1b4d4b1
Fix faulty mapping on TPS
2015-06-09 23:38:41 +10:00
eae0faa904
Minor cleanups and fixes
2015-06-09 23:32:00 +10:00
d791cacae6
Another possible softLimit fix
2015-06-07 22:14:47 +10:00
24da9a4098
Possible fix for soft cut rev limit fails
2015-06-07 22:05:16 +10:00
d35164c46f
Minor timing protections
2015-06-05 23:30:37 +10:00
372f6da64e
Switch 2D tables to pointers
2015-06-05 18:02:47 +10:00
e65ed37fea
Initial (Slightly buggy) commit of 16x16 tables
2015-06-05 17:28:31 +10:00
f34c03c98e
Big table lookup optimisation
2015-06-04 21:54:11 +10:00
a9c2a2dec7
Minor performance tweaks
2015-06-04 00:31:02 +10:00
204f024218
Minor cleanups of the fan control additions
2015-06-02 22:56:18 +10:00
f40958f576
Updated for Cooling Fan controls
...
Updated for Cooling Fan controls
2015-05-30 22:20:22 +03:00
a2137403ce
Some initial work on idle control
2015-05-29 17:33:00 +10:00
48f426317d
Add explicit license information
2015-05-29 09:49:44 +10:00
be153bd4e7
Allow for custom injection timing on a per channel basis
2015-05-29 00:15:27 +10:00
2004f066d9
Totally untested 6 and 8 cylinder support
2015-05-24 23:50:54 +10:00
5a56f05728
Add missing semi-colon from last commit
2015-05-23 21:56:15 +10:00
a8b53afabf
Update speeduino.ino
2015-05-23 04:34:29 +03:00
3b69b191d0
Default RPM pointer
...
Default RPM pointer to allow tuner studio to be opened prior to being able to configure board set-up
2015-05-23 04:07:44 +03:00
73b8979dfc
Complete, but untested, 'Basic Distributor' decoder
2015-05-22 19:54:13 +10:00
30caaada2b
Completed moduler decoder
2015-05-22 14:14:03 +10:00
5c77ed9d1d
Correct order of setting trigger wheel
2015-05-22 11:43:10 +10:00
13c61026cb
Additional modular decoder work
2015-05-18 22:46:22 +10:00
a6eed4a18f
Allow for trigger angle setting to 1 degree (NEED INI FILE RELOAD!!)
2015-05-16 22:06:05 +10:00
a16916fa74
Initial work on modular decoders
2015-05-16 21:06:54 +10:00
0db28fab18
Add fuel pump and idle pin mappings
2015-05-16 21:06:23 +10:00
de07544c80
Relocated coil and injector PinMode
...
Setting the coil and injector pin mode should be performed after calling the pin mapping, to ensure the outputs are set correctly preventing spurious faults. This shall correct part of the problem experienced with the ignition inversion option in tuner studio.
2015-05-09 02:56:42 +03:00
21c00cd3f9
Remove unneeded include for old file
2015-05-04 08:57:22 +10:00
128942aca6
Actually use the dwell correction curve in the code
2015-04-22 16:49:10 +10:00
ffce6ad81c
Add tacho output pulse
2015-04-14 14:41:44 +10:00
13f4d9b131
Remove extra byte that shouldn't have been in one of the config pages
2015-04-10 17:26:38 +10:00
3f2cd5cad3
Semi-sequential injector timing
2015-03-24 20:06:19 +11:00
2d815fa9c1
Voltage correction tables added (Not currently used)
2015-03-24 13:12:35 +11:00
f97a60eb35
Add config option to set the board layout being used
2015-03-15 22:54:47 +11:00
fee967d23f
Initial I2C OLED display work. Functioning.
2015-03-01 08:27:16 +11:00
a8e7066b41
Fixes and performance improvements to TAE
2015-02-17 16:31:26 +11:00
524c7f94f2
Reduce frequency of TPS sampling to every 16 loops
2015-02-17 15:40:09 +11:00
6568772638
Remove static casts after changing type of curGap
2015-02-16 08:47:10 +11:00
b743b2d1d0
Make the code compileable with eclipseArduino
2015-02-14 18:04:00 +01:00
7270b0b664
Inclusion of spark tracking byte
2015-02-10 00:01:46 +11:00
ea647441d3
Honour dwellCrank
2015-02-07 18:16:08 +11:00
5edf3f0699
Fix for potential missed schedules when the start time occurs at a point in the future closer than the next main loop
2015-02-06 21:18:35 +11:00
7a3996d6e0
Initial code for the closed loop algorithm
2015-02-06 08:11:33 +11:00
ca67510e70
Minor cleanup of pulsewidth calc.
2015-02-04 11:52:01 +11:00
e62231fb06
All the code infrastructure for the AFR target table
2015-02-03 21:33:22 +11:00
9c920f060b
Revert fastMap usage
2015-01-30 23:51:01 +11:00
965b6d89eb
Performance tweaking
2015-01-28 19:31:09 +11:00
2d9484731a
Fix 10x error in TAE check
2015-01-28 13:04:23 +11:00
e00e29144d
Add serial buffer threshold check to avoid potential overflow
2015-01-26 19:40:48 +11:00
3c934962aa
Enable WUE
2015-01-19 09:10:01 +11:00
2f94559101
Experimental temperature fix
2015-01-12 23:23:43 +11:00
45e4cb6466
Fixed missing temp offset on the comms signal
2015-01-12 21:23:25 +11:00
8eb6530044
Untested support for 3 cylinder engines
2015-01-03 09:09:19 +11:00
c0e0e73639
Experimental change to the PW calc
2014-12-30 16:23:18 +11:00
6ec1d3fedf
Use injector open time from TS rather than hardcoded
2014-12-30 11:12:01 +11:00
7d7bd02922
Fix occasional RPM flutter
2014-12-24 10:25:40 +11:00
81cfec3e2d
Minor tweaks to startup and cranking
2014-12-23 20:27:46 +11:00
72ec1179b0
New calibration values for O2
2014-12-23 18:05:52 +11:00
e98dba1f98
Enable basic corrections
2014-12-21 22:43:30 +11:00
6c861939ee
Better decoding of -2 wheels
2014-12-21 21:00:44 +11:00
28f1285a55
Fix for potential weirdness on 2nd outputs in some cases
2014-12-19 11:25:53 +11:00
fcd700b6f9
Further testing on the calibration receives from TS (Partially Broken)
2014-12-16 00:34:02 +11:00
838f0ee5c7
New sensor calibration system - Mostly working (With limitations)
2014-12-11 10:21:59 +11:00
6612e6bcf8
Fix potential overflow with low RPM schedules
2014-12-09 15:32:02 +11:00
3c325a7190
Minor changes to ini for logging and input checks
2014-11-17 22:20:40 +11:00
f9a1a29fde
Correctly pull in battery reference voltage (And report in TS)
2014-10-15 11:49:11 +11:00
67b4c2247b
Fix for potential overflow of the req_fuel figure
2014-10-10 16:39:38 +11:00
8a5888edc3
Seemingly working TunerStudio tooth logger
2014-10-03 14:19:37 +10:00
0bd13361dd
Trigger angle fix for byte division in serial comms
2014-09-22 20:15:50 +10:00
f1a94642c0
Initial tooth logging
2014-09-22 09:07:34 +10:00
86d163a072
Tweaks to PW calcs
2014-09-22 05:52:32 +10:00
f81294fae3
Disable corrections for now
2014-09-21 08:46:04 +10:00
dee88e2340
Add corrections output channel + RPM logic change
2014-09-21 08:17:14 +10:00
ea84f4d5eb
Revert use of fastMap
2014-09-17 21:41:33 +10:00
1a9ad33e3a
Honour the fixed timing angle setting
2014-09-15 09:08:20 +10:00
9d8d4b278d
Fix compiler warning
2014-09-09 13:59:27 +10:00
601e7ed541
Addition of v0.2 pin mappings
2014-09-04 08:19:17 +10:00
9022f6e8ff
Initial code for cranking staging
2014-08-25 22:03:57 +10:00
eadd5e53b2
Appropriate MAP mapping for MPX4250
2014-07-17 23:42:06 +10:00
b0cdc7639c
Changed the triggerFilterTime to be dynamic based on max rpm
2014-07-08 09:05:32 +10:00
d306e8aee7
Tweak trigger filter time to better value for 36-1
2014-07-07 22:48:50 +10:00
c463aaa6d5
Minor changes to the injector schedules
...
Trying to track down source of injector weirdness that was reported.
Can’t see anything odd, but maybe related to multiple schedules running
concurrently.
2014-07-06 21:50:02 +10:00
f17c66fe6c
Fix for math error on crank timing optimisation
2014-06-30 13:04:55 +10:00
82d6ede7b8
Injector timing math tweaks
2014-06-30 00:32:22 +10:00
0943415f8a
Fix for cylinder setting from TunerStudio
2014-06-29 19:36:29 +10:00
Josh Stewart
darren siepka
MoysieWRX
Fredrik Johansson