2819adb865
Custom bootloader recognition
...
Added a new serial command that allows a custom 16u2 firmware to let the speeduino know about itself. After issuing a `, the speeduino will expect one more byte indicating the capabilities level of the custom firmware (only 1 for now).
2018-01-12 21:37:21 -06:00
dd9941ce5d
Introduce end-of-line normalization
2018-01-12 14:04:43 +11:00
81d8ccd358
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-09 18:20:47 -06:00
6c8e238697
January dev signature
2018-01-10 00:11:57 +11:00
43f0d35839
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-07 16:22:55 -06:00
ae8ea08d41
Reset Control
...
Changed reset lock feature to a more general "reset control" feature. Moved reset control settings to the general Settings menu. added a serial U command that will halt comms and set the control pin low when another byte is received to facilitate reset control for devices that lack an AtmegaXXu2 usb controller. Improved context help for reset control. Corrected reset lock status indicator on / off labels. moved reset control setup to utils.ino.
2018-01-07 16:22:18 -06:00
f474a95dc5
December 2017 signature and base tunes
2018-01-03 21:52:25 +11:00
9f53002b9d
Adjust injector setting priority so that sequential will override the Simultaneous/Alternating option
2018-01-03 17:27:22 +11:00
03e6c2d476
Software controlled auto-reset prevention
...
This feature enables the Speeduino to set a pin high that will tell the Arduino's 8U2/16U2 firmware not to reset on new serial connections. This requires a slightly modified firmware for the 8U2/16U2 that will only reset on DTR when PB7 is also held low.
2018-01-01 15:39:43 -06:00
8feb7ae521
Fix typo in ini
2017-12-21 23:06:09 +11:00
38dfb2d8f6
Fix for timing bug on Miata 99-05 pattern
2017-12-21 13:30:45 +11:00
36c08d42cc
Initial layout work for 36-2-2-2 decoder
2017-12-15 16:38:17 +11:00
8fe7ff66a9
December dev signature
2017-12-15 16:23:56 +11:00
aebe4d2719
November signature and base tunes
2017-12-10 17:21:55 +11:00
98ea973a80
Add individual pulse widths to the comms output
2017-12-07 11:42:44 +11:00
1e432514f9
Allow separate bars calibration
2017-11-28 10:09:54 +11:00
2989e32f15
Memory adjustments for staging fuel table
2017-11-21 15:17:55 +11:00
f33455229d
Change encoding used on ini file so the latest TS beta (3.0.50.17) can read it
2017-11-16 15:15:47 +11:00
36ca95a330
November dev signatures
2017-11-13 09:14:58 +11:00
883ba4a25f
Potential fix for access enrich overflow
2017-11-08 22:51:40 +11:00
fa5d721b98
October release signatures and base tune
2017-11-07 22:13:27 +11:00
cfb8d20f4e
Fix problem with the AFR correction ignition count not being checked correctly
2017-11-05 19:56:04 +11:00
4b5b040615
Merge pull request #110 from Autohome2/can-serial3
...
Can serial3 updates
2017-11-03 00:00:53 +11:00
380ffc20b8
update serial3 and canbus related data transfer protocols and naming
2017-11-01 20:17:47 +00:00
17030a9df7
Add in check for ignition count to the closed loop AFR control
2017-11-01 16:10:06 +11:00
c7a78ae44f
Fix duty cycle calculation when sequential fuel is used (+formatting of ini)
2017-11-01 13:33:39 +11:00
b67ae45b69
Added NO2C pin mapping
...
Closes #106
2017-10-25 20:55:46 +11:00
1a86a738ed
Add ignition dwell gauge in TS
2017-10-24 21:10:47 +11:00
2ec972948f
Changes to logged variables
2017-10-24 16:54:18 +11:00
6a8ab1015b
Move the pulse width function into the speeduino.h scope
2017-10-24 14:08:32 +11:00
ac4a36529b
Cleanup work in the ini
2017-10-23 22:42:09 +11:00
e921901fc0
Pass fuel pulse width full value to TS
2017-10-10 21:58:03 +11:00
91a428401a
October dev signature
2017-10-10 19:56:37 +11:00
b067ef100b
Signature and base tunes for Sep 2017 release
2017-10-09 12:02:05 +11:00
9202afe7cf
Prevent memory corruption from the page expansion
2017-10-04 12:24:40 +11:00
683fe44562
Initial work on rolling sign cut rev limit
2017-10-04 09:48:46 +11:00
172cd18435
Add explicit on/off mode for the VVT table
2017-10-02 20:01:08 +11:00
c901748974
Allow use of Analog pins for some selectable outputs
2017-10-01 00:07:36 +10:00
7aa8d277f3
Potential fix for cranking problem on Miata 9905 pattern
2017-09-20 16:43:55 +10:00
9d89494666
Expand page 4 to 128 bytes
2017-09-20 12:15:41 +10:00
1cd2a0f296
Expand page 2 to 128 bytes in size
2017-09-19 15:09:32 +10:00
5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
1fa85bbbdb
Change wording on boost cut indicator
2017-09-18 10:41:00 +10:00
2d03665162
Remove unused odd fire variable
2017-09-12 14:02:00 +10:00
0694564ed1
September dev signature
2017-09-10 00:51:10 +10:00
d8d1d8ff04
August signature and base tune
2017-09-09 22:07:46 +10:00
7c0932a396
Adjust boost timings slightly
2017-09-07 06:20:22 +10:00
4e858f1ca8
Completed new PID mode for boost control
2017-09-04 11:50:55 +10:00
3b33094230
Initial commit of new Ideal PID implementation (Active for boost control)
2017-09-03 20:28:49 +10:00
bd54aae566
Enable per tooth timing on Nissan 360
2017-08-31 21:04:32 +10:00
e7ac717796
Startup improvements on Nissan 360 CAS
2017-08-31 18:01:37 +10:00
e93bf9f5ac
Fix RPM calc issue on Miata 99-05
2017-08-30 12:53:56 +10:00
a44f36b58c
Small cleanup in ini
2017-08-29 14:18:56 +10:00
4e47e8ae19
Cleanup page 11 array
2017-08-25 17:26:04 +10:00
fc06ce4d1b
Minor ini and comms cleanup
2017-08-24 17:24:28 +10:00
7db1101429
Completely untested trailing spark for FC rotary ignitions
...
May God have mercy on us all
2017-08-23 17:18:59 +10:00
539618c583
Initial interface work on rotary ignition modes
2017-08-23 08:14:11 +10:00
c791302a0e
Harley EVO decoder (courtesy of @bitwise17)
...
Closes #93
Slightly changed to fix bugs and be MISRA compliant
2017-08-17 14:17:21 +10:00
77094a59d1
Better startup procedure and DIY watchdog
2017-08-17 11:24:26 +10:00
345bf5d405
August dev signatures
2017-08-06 22:15:15 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
4f7e11c233
Fix for spark miss every ~250 revs
2017-08-06 17:00:58 +10:00
6727b0a750
Activate per tooth timing on dual wheel
2017-08-01 09:39:50 +10:00
523c05fda9
July signature and base tune
2017-07-30 23:07:48 +10:00
9cd31f335f
Cleanup of comms variables
2017-07-27 14:04:38 +10:00
3db9dc99fd
New MAP calculation method (More accurate and allows negative calibration values)
2017-07-27 12:47:59 +10:00
b42d0069ab
Clean up cranking enrichment dialog
2017-07-25 20:42:06 +10:00
e16da51101
Additional work for the new memory page
2017-07-24 14:19:07 +10:00
ccb6e194b7
Initial work creating a new memory page (pg 11)
2017-07-20 16:54:50 +10:00
9d2e938a4d
Initial (mostly untested) live baro reading
2017-07-17 17:06:14 +10:00
905a8642ff
July dev signature
2017-07-17 16:36:44 +10:00
e5591bc7bc
June signature and base tune
2017-07-11 16:21:44 +10:00
a9891ad38c
Fix name of Lambda entry in the log
2017-07-10 11:56:28 +10:00
3d2a692d53
Change freeRam() to unsigned int
2017-07-07 09:26:13 +10:00
1f03499725
further cleanup of ini and msq
2017-07-05 16:02:07 +01:00
d7f374b473
Merge dazq CAN changes
...
Closes #91
2017-07-05 22:28:11 +10:00
5992e31f2f
Experimental commit of per tooth based ignition timing
2017-07-03 18:39:10 +10:00
7f86b91198
Add fields to allow custom MAP sensors being entered
2017-07-03 12:14:07 +10:00
f67f24f16d
Merge pull request #89 from Autohome2/can_io_2
...
External devices over serial3 update
2017-07-02 22:40:45 +10:00
652624b288
Add initial Daihatsu +1 decoder (also 3 cylinder sequential ignition)
2017-06-26 17:34:10 +10:00
8db13859e1
Merge branch 'master' into can_io_2
2017-06-20 02:44:51 +01:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
5c25590f82
Fix warnings for PSIG :)
2017-06-14 18:07:06 +10:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
ae7a75673f
June dev signature
2017-06-06 08:32:08 +10:00
4f62900cba
May base tune file
2017-06-05 14:41:58 +10:00
02564d3218
May signature
2017-06-05 14:28:28 +10:00
3dd5ab7370
Tentatively working lambda option
2017-05-27 22:16:42 +10:00
98c3a51ec2
WUE VEAL testing added (Currently disabled)
2017-05-26 13:09:19 +10:00
81c548a9e8
Tentative 6 cylinder support (3000GT) added to 4G63 decoder
...
Requested in #76
Needs testing. Select the decoder and set cylinders to 6.
Note that the Medium and Aggressive trigger filters do NOT currently
work for 6 cylinders and should not be used.
2017-05-16 16:49:35 +10:00
1db7be4a33
Flex fuel boost adder
2017-05-12 18:14:14 +10:00
bcd7b29b59
Merge pull request #86 from Autohome2/can-serial3
...
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 21:53:19 +10:00
bffb4fb72f
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 00:08:24 +01:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
Murray
Josh Stewart
darren siepka
Autohome2