Josh Stewart
|
87e2cbbde2
|
Fix default values for AE RPM taper
|
2018-07-03 22:21:40 +10:00 |
Josh Stewart
|
72397a90e1
|
Base tune and signatures for June release
|
2018-07-03 17:31:28 +10:00 |
Josh Stewart
|
5c79f2ac15
|
Multiple nitrous control fixes. Appears to be working fully. Closes #147
|
2018-07-03 15:46:23 +10:00 |
Josh Stewart
|
8ff299e3ac
|
Initial nitrous control implementation (Needs tweaking and testing)
|
2018-06-30 01:19:51 +10:00 |
Josh Stewart
|
f276bb7042
|
Add Fix angle on/off setting
|
2018-06-29 18:07:39 +10:00 |
Josh Stewart
|
8d633317cb
|
Even more wiki images
|
2018-06-21 17:10:39 +10:00 |
Josh Stewart
|
267b31323a
|
More wiki images
|
2018-06-21 16:45:56 +10:00 |
Josh Stewart
|
41776e8d95
|
Wiki images
|
2018-06-21 09:16:31 +10:00 |
Josh Stewart
|
2cc9aea22f
|
Multiple new wiki images
|
2018-06-20 23:55:08 +10:00 |
Josh Stewart
|
0bb0d9b0e3
|
Dual wheel config image for wiki
|
2018-06-20 23:34:26 +10:00 |
Josh Stewart
|
e97c909d7a
|
Sane size images
|
2018-06-20 13:17:35 +10:00 |
Josh Stewart
|
214e665ad9
|
Updated wiki images
|
2018-06-20 13:13:15 +10:00 |
Josh Stewart
|
e5ea1ce36e
|
Allow 6g72 patterns under the new sync method of the 4g63 decoder. #76
|
2018-06-17 15:16:22 +10:00 |
Josh Stewart
|
3773647062
|
Initial implementation of AE RPM tapering (Issue #138)
|
2018-06-10 14:57:52 +10:00 |
Josh Stewart
|
34e0aca5b6
|
June Dev signatures
|
2018-06-10 13:04:57 +10:00 |
Josh Stewart
|
47b7da893e
|
Base tunes and signtatures for May 18 FW
|
2018-06-07 15:22:04 +10:00 |
Josh Stewart
|
388ad9ac41
|
Add UA4C board definition
|
2018-06-04 16:33:19 +10:00 |
Josh Stewart
|
da12223142
|
Nearly complete NA8 64-pin PNP
|
2018-05-30 14:18:48 +10:00 |
Josh Stewart
|
ecfd621a01
|
Cleanup boost control settings to disable PID options when using open loop
|
2018-05-15 14:13:07 +10:00 |
Josh Stewart
|
a694651caa
|
Add open loop boost option back in
|
2018-05-15 14:05:45 +10:00 |
Josh Stewart
|
40fb525882
|
Tidied up ini load units etc for different algorithms
|
2018-05-15 10:12:26 +10:00 |
Josh Stewart
|
19e258ecfb
|
Independent fuel and ignition load algorithms
|
2018-05-08 16:43:18 +10:00 |
Josh Stewart
|
00daa6b93a
|
Initial Idle Up implementation
|
2018-05-04 17:55:58 +10:00 |
Josh Stewart
|
50196ce247
|
May dev signatures
|
2018-05-02 16:40:57 +10:00 |
Josh Stewart
|
be6658975f
|
Add DrawIO library
|
2018-05-01 23:36:35 +10:00 |
Josh Stewart
|
d7599089dc
|
April 18 signatures and base tunes
|
2018-05-01 17:40:05 +10:00 |
Josh Stewart
|
ba88cfc07d
|
Allow negative fixed ignition angles
|
2018-05-01 17:33:52 +10:00 |
Josh Stewart
|
4b5f580649
|
All base work on EMAP sensor configuration and reading
|
2018-04-24 21:31:52 +10:00 |
Josh Stewart
|
d473e00ce4
|
Groundwork for proper variable algorithms
|
2018-04-24 17:11:10 +10:00 |
Josh Stewart
|
af62eb716e
|
Final version of Calculations dash for this month
|
2018-04-23 16:56:47 +10:00 |
Josh Stewart
|
1d5a79757a
|
Send through channel and squirt info to TS
|
2018-04-23 15:27:57 +10:00 |
Josh Stewart
|
68f542405e
|
Remove unused flex variables
|
2018-04-13 08:38:24 +10:00 |
darren siepka
|
8583e8ac7a
|
Merge branch 'teensy_reva' of https://github.com/Autohome2/speeduino
|
2018-04-05 21:42:47 +01:00 |
darren siepka
|
339ece2618
|
add reva and revb teensy boards and enable second o2
|
2018-04-05 21:41:33 +01:00 |
Josh Stewart
|
818a2416b8
|
Increase the cranking RPM setting resolution to 10rpm
|
2018-04-04 14:39:17 +10:00 |
Josh Stewart
|
4759b9f729
|
Files for v.0.4.3c board (Adds stepper driver disable trace)
|
2018-04-03 08:25:01 +10:00 |
Josh Stewart
|
fec0211da0
|
Initial work on calculations dashboard
|
2018-04-01 20:50:45 +10:00 |
Josh Stewart
|
c35ed913a1
|
March dev firmware sigs
|
2018-03-14 23:10:30 +11:00 |
Josh Stewart
|
566c20d8e9
|
Minor wording change for some options
|
2018-03-12 09:13:19 +11:00 |
Josh Stewart
|
0a8d5e21c5
|
Feb 2018 signature and base tune
|
2018-03-10 20:55:21 +11:00 |
Josh Stewart
|
04b0ea7ebb
|
Final design files for the v1.0 MX5 PNP
|
2018-03-10 14:10:23 +11:00 |
Josh Stewart
|
35498b39af
|
Add analog channels A10-A15 to the fan output drop down
|
2018-03-01 16:28:58 +11:00 |
Josh Stewart
|
6d24d3da78
|
BOM and Images for Teensy adapter v1
|
2018-02-26 14:24:02 +11:00 |
Josh Stewart
|
c0ec2cdc02
|
Disable the cranking advance setting when the Fixed cranking option is used
|
2018-02-24 15:15:27 +11:00 |
Josh Stewart
|
4c47ea93d3
|
Add a check that prevents staged injection from trying to run when there are more cylinders than injection channels
|
2018-02-22 23:10:35 +11:00 |
Josh Stewart
|
b0df3523ed
|
Final production version of the Teensy adapter
|
2018-02-20 09:51:45 +11:00 |
Murray
|
684f668c84
|
changed ini for page 10 unused bytes to match the convention used in other config pages. reformatted the reset control config page section. fixed first element of flex bins not being initialized to 0.
|
2018-02-17 11:46:42 -06:00 |
Murray
|
ed372efe0f
|
Merge branch 'master' of https://github.com/noisymime/speeduino into resetcontrol-inifix
|
2018-02-15 19:37:43 -06:00 |
Josh Stewart
|
83a8fdefca
|
Merge pull request #126 from lsdlsd88/patch-1
fix cranking IAC bins in MX5 NA6 Base Tune
|
2018-02-12 10:09:16 +11:00 |
Murray
|
528d3193d8
|
changed reset control config to use a setting group
|
2018-02-07 18:37:21 -06:00 |