* Add config error indicator
* Fixes and naming change
* Fixes
* Change to fix conflicting error bit flag in init
* Updating IO flag setting
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Programmable outputs
* Prevent array overflow
* Show fullStatus variables names on dialog
* Further fixes
* Update with master
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Iac automatic resolution
Fix idle stepper, work direct with values < 255 and keep existing mode
* Fixed Hysteresis for stepper
0 value bug the counter.
* Fix value
Changed value to 255.
* Ensure no overflow on iacMaxSteps
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Half sync indicator for 3 different trigger patterns.
Added half sync indicator which shows that there is only primary trigger present for missing tooth, dual wheel and miata 9905 trigger patterns
* missing tooth required some adjusting
* forgot to remove stm32 pin mapping. I have it in other PR
* Leave only for missing tooth
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
* fix to serial0 and serial3 when offset is 0 uses wrong command
* fix to serial0 and serial3 when offset is 0 uses wrong command
* fix hex num
* add teensy canbus library
teensy can read and write functions enabled
* update to teensyduino 1.49
* part 1 prepare structure for obd can port works
rename old can_command() to secondarySerial_command() for secondary serial and create new can_command for real CAN instruction decode.
fix masking for teensy 3x and 4
* set mega as default build
* last part of main obd2 canbus for teensy MCU
* tested obd2 for teensy3.5
* Only init CAN on Teensy with 3.5. Otherwise this will lockup on 4.1
Co-authored-by: Josh Stewart <josh@noisymime.org>
* [VVT] PID work
Tested on a half moon CAM pattern as working, it should work on others too.
Added option to reverse the PWM output
Co-Authored-By: pazi88 <48950874+pazi88@users.noreply.github.com>
* Fix typo
Co-Authored-By: diy-efi <diy-efi@users.noreply.github.com>
* Add second VVT pwm on same timer
All precious VVT variables was renamed to VVT1 and added VVT2 stuff.
Tested with logic analyzer.
* Define VVT2 for other boards
Added vvt2Pin
* Just update on first tooth
Co-authored-by: pazi88 <48950874+pazi88@users.noreply.github.com>
Co-authored-by: diy-efi <diy-efi@users.noreply.github.com>
* [FP] Add injector delay for priming
* Fix build
* Add the startup TPS read back in to ensure proper flood clear check
Co-authored-by: Josh Stewart <josh@noisymime.org>
Changed aseTsnDelay name to aseTaperTime
Added a default aseTaperTime to 0.1S
aseTsnStart isn't needed, removed
Added IAC_STEP_OL taper, big thanks to Ryan
Default dfcoMinCLT is 0C, added calibration offset and increased it to 40C as described on updates.ino
Changed bitRead to BIT_CHECK
Fix dfcoStart wasn't been reseted if conditions was droped before elapsed time causing next DFCO activation right away
Few cosmetical changes on ini
Update commits counter
Josh Stewart
celso acyr
Vitor Moreno B. Sales
Pasi Kemppainen
iLeeeZi
Antti Muurikainen
Autohome2
Mateusz Muszyński