127bc1585a
[DFCO] Fix - delay isn't working if conditions aren't met immediately ( #363 )
...
* [DFCO] Include a delay
* [DFCO] Fix - delay isn't working if conditions aren't met immidiatly
Co-Authored-By: muuris <55035659+muuris@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
Co-authored-by: muuris <55035659+muuris@users.noreply.github.com>
2020-04-17 23:32:10 +10:00
8e89d5ff3e
Fix negative values in flexfuel ignition advance ( #360 )
...
* Fix negative values in flexfuel
* Simplification
* Update previous values
* Comment update
2020-04-16 16:31:54 +10:00
5b9bc789ab
Datalog entries of pulsewidth with 3 decimals instead of 1 ( #336 )
...
It's already with this higher resolution in TS, and tuning idle and low load area with big injectors really require more than just one decimal precision.
2020-04-12 08:13:53 +10:00
53faee1a3e
First commit ( #358 )
2020-04-12 07:31:03 +10:00
62e90379f6
[DFCO] Add a minimum coolant ( #353 )
...
* [DFCO] Add a minimum coolant
On pure ethanol or E85 the engine need a lot fuel to return from DFCO when cold.
Add a minimum temp
Fixes copy-paste error
Fix sign error
* Add signed cast on the calibration offset
Co-authored-by: Josh Stewart <josh@noisymime.org>
2020-04-08 11:25:53 +10:00
7edd9f7d38
Update all dialog help links to the new wiki
2020-04-08 08:30:47 +10:00
af5d769147
Setup memory for vss
2020-04-07 23:45:24 +10:00
558d063f56
[DFCO] Include a delay ( #348 )
...
Co-authored-by: Josh Stewart <josh@noisymime.org>
2020-04-03 14:46:11 +11:00
fc40cc24db
prevent priming pulse if flood clear is active ( #289 )
2020-04-02 10:42:26 +11:00
8722065168
6 and 8 cylinder sequential injection ( #280 )
...
* 6 cyl sequential related cleanup
* disable 6cyl seq fuel trim tables for now
* add the over 2 squirts fix
* Add 5 and 6 cylinder semi and full sequential
* 5 cylinder changes
* fix priming pulse when using paired or semi-sequential injection
* add 5 cyl special case back
* Add missing 8 cyl stuff
* add missing PW8
* allow to change inj4Ang with non sequential 5 cylinder
* add missing helptext
2020-04-01 17:03:11 +11:00
1c7ac1a825
Fix idle taper variable names and include commits counter ( #346 )
...
* Fix ini errors
* Include commits counter
2020-04-01 14:33:41 +11:00
1b4d81453c
6&8-cyl wasted cop ( #314 )
...
* Added 6-cyl cop mode
* Update to ini
* Why not 8-cyl wasted COP too
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
2020-03-26 21:49:55 +11:00
e6cf7b57cb
Cleanup from last commit
2020-03-25 22:08:08 +11:00
4ca428e61e
[IDLE] Crank to run PWM taper ( #340 )
2020-03-25 21:36:45 +11:00
63b726cf78
[ASE] Transition time to disable ( #342 )
...
* [ASE] Transition time to disable
* Real time ASE
* Fix last commit
* Fix variables declaration
2020-03-24 12:36:24 +11:00
a3aedad316
Calculate the injector open time in tunerstudio ( #319 )
...
* Add injector open time calculation option
* update calculations dash
* better help text
* remove option to turn off
2020-03-19 15:27:23 +11:00
bc67453098
Addition of 0-720 injector timing curve. See #306
2020-03-17 18:27:05 +11:00
faaf530b0c
Merge branch 'master' of https://github.com/noisymime/speeduino
2020-03-17 10:39:39 +11:00
48387cf14c
Change ini to move individual injector timing to an RPM based curve
2020-03-17 10:39:35 +11:00
b942f090cf
Added cranking enrich range ( #335 )
...
* First commit
Increases cranking enrichment range from 0..255% to 0..1275%, accuracy is reduced to 5% steps but this should be enough.
Max allowable gammae increased from 511% to 1500%, overflow in PW-function prevented.
* Last one missed the second overflow prevention (less bitshift)
* Version needs to be increased in order to avoid performing value update routine on every startup
* Less bitshift is required only on iCorrections
2020-03-17 10:38:03 +11:00
f8b382f1ae
Update ignition channel numbers for BMW PNPs
2020-03-16 12:02:49 +11:00
0948abe77a
Merge branch 'master' of https://github.com/noisymime/speeduino
2020-03-12 11:44:38 +11:00
9249c63ac9
Add new dynamic ini mode based on # inj/ign outputs
2020-03-12 10:07:40 +11:00
743129b21c
Small change to write Aux in channel names to Data Logs. ( #334 )
...
* Aux in names to datalog
* Datalog rest of the channels and also only if configured
2020-03-07 08:43:17 +11:00
228d491098
Dev signatures for March 2020
2020-02-18 17:29:32 +11:00
80f7fcf7fd
Signatures for 202002
2020-02-16 20:11:10 +11:00
6f8c126581
Merge branch 'master' of https://github.com/noisymime/speeduino
2020-01-30 11:53:03 +11:00
8886d3dbd7
Bump required TS version to 3.1 to allow for use of restrictSquirtRelationship option
2020-01-30 11:52:51 +11:00
335a191238
Wue autotune ( #294 )
...
* add wue autotune
* fix ve autotune if lambda is used
* add lambdaTarget
* fix typo
* change one name
2020-01-28 22:50:34 +11:00
0be03b20eb
Merge branch 'master' of https://github.com/noisymime/speeduino
2020-01-21 16:59:42 +11:00
52cce70784
Resolve merge
2020-01-21 16:59:33 +11:00
d4104ea9f2
Minor tweaks for better operation of higher sequential fuel counts
2020-01-21 16:57:26 +11:00
9d0b74982b
Pin mapping for BMW PnP boards ( #295 )
...
BMW PnP pin mapping to support 6cyl fully seqvential. Basically same as v0.4 pin mapping, but in addition there is correct pins for ign/inj 5-6.
2020-01-21 15:41:51 +11:00
e004a81524
Increase maximum corrections value from 255 to 511
2020-01-21 15:16:54 +11:00
ac3ec76b53
add io summary and gauge limits dialogs in TS ( #288 )
...
* add io summary gauge limits dialogs in ts
* Clean titles
2019-11-28 16:30:34 +11:00
8cb7876406
Improvements to the high speed loggers. Fixes #285
2019-11-25 14:50:43 +11:00
262e9dc506
Dev signatures for 201912
2019-11-19 21:17:44 +11:00
f1f593f97c
Signatures and base tunes for the 201911 release
2019-11-14 23:17:46 +11:00
bfe704ab05
Add default values in updates.ino for 201911
2019-11-14 18:00:39 +11:00
d75dbf9719
Add new MAP sampling option (Event average)
2019-11-14 17:40:25 +11:00
77975a0a59
Fix idle advance delay and add baro correction comms ( #279 )
2019-11-11 14:32:49 +11:00
de8b563028
Merge branch 'master' of https://github.com/noisymime/speeduino
2019-11-10 19:27:56 +11:00
44ce30ab75
Cleanup idle adv dialog and add delay
2019-11-10 19:26:10 +11:00
5b876b252a
fix WUE lookup function and add missing commas in speeduino.ini ( #278 )
...
* fix WUE lookup
* fix missing commas in speeduino.ini
* fix correctionWUE
2019-11-10 19:04:32 +11:00
892e05d2fc
Add idle ignition timing correction feature ( #275 )
...
* Add idle advance and idle switch settings
Add idle RPM target based ignition timing correction
* Change few names to avoid confusion
changed idle switch to closed throttle position sensor (CTPS) and moved CTPS settings under idle advance settings dialog for now
2019-11-08 16:40:53 +11:00
3a6b9045f3
Added missing TS gauges ( #272 )
...
* Map reading offset fix
Because of this, mega was backfeeding +5v to map sensor signal pin, causing offset to map reading.
* Update init.ino
* Added new TS gauges
Added missing TS gauges:
- boostTarget
- Boost Duty Cycle
- Target AFR
- VVT Duty Cycle
- Idle Target RPM
- IAC Value
- # Sync Losses
2019-11-06 17:13:18 +11:00
71add256fc
Merge branch 'master' into dev/injOpen
2019-11-06 17:00:45 +11:00
4ffee25c4a
Add manual baro correction curve
2019-11-04 10:14:11 +11:00
434467686c
Prevent potential overflow of the ASE enrich value. Fixes #274
2019-11-01 14:25:51 +11:00
91f90f32e6
Add condition to apply BattV correction only on open time
2019-10-14 21:08:18 -04:00
Vitor Moreno B. Sales
Antti Muurikainen
Josh Stewart
iLeeeZi
Pasi Kemppainen
Bruno Bousquet