Go to file

Moonglow dc5d127c09 *update support methods		2021-10-26 11:46:02 +03:00
Drivers	*initial	2020-09-04 16:54:54 +03:00
Middlewares/ST/STM32_USB_Device_Library/Core	*initial	2020-09-04 16:54:54 +03:00
Src	*use hardware only TX/RX loop flag ( fix unneeded TX echo )	2021-10-25 18:32:58 +03:00
.gitignore	*exclude build directories from index	2021-01-11 14:38:32 +03:00
LICENSE	*initial	2020-09-04 16:54:54 +03:00
Makefile	+add PCAN X6 definitions	2021-02-16 15:54:51 +03:00
README.md	*update support methods	2021-10-26 11:46:02 +03:00
STM32F407VGTx_FLASH.ld	*initial	2020-09-04 16:54:54 +03:00
startup_stm32f407xx.s	*initial	2020-09-04 16:54:54 +03:00

README.md

PEAK PCAN PRO/PRO FD firmware for STM32F4 based boards

Target hardware:

Any STM32F407/405 based boards with 8MHz oscillator

Pinout:

PIN/PINS	DESCRIPTION
PC10	STATUS LED
PA2/PA3	TX/RX CAN1 LED
PC6/PC7	TX/RX CAN2 LED
PB8/PB9	CAN1 RX/TX
PB5/PB6	CAN2 RX/TX
PB14/PB15	USB DM/DP

Features:

Works out of the box in Linux
Works with Linux PCAN-View ( needs to install PEAK Linux drivers )
Works with BUSMASTER and PEAK PCAN-View in Windows

Limits:

PRO FD firmware does not support FD frames cause bxCAN not supports it, but it will works with classic CAN
Some protocol specific messages not implemented yet
Be sure to use PB14/PB15 pins for USB

Toolchain:

GNU Arm Embedded Toolchain

Tips:

PRO FD firmware has better performance on windows ( due internal PEAK driver implementation )

Build:

PCAN PRO firmware make pro
PCAN PRO FD firmware make pro_fd
PCAN FD firmware make fd

Support me

Bitcoin (P2WPKH): bc1qstnsjqu2kw9v2axens54ycegn3stwvluq7ze5j

License

WTFPL