diff --git a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h index 71ea567148..78bff6032c 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:38 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:26 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -2015,8 +2015,9 @@ struct engine_configuration_s { offset 912 bit 5 */ bool unfinishedenableLaunchBoost : 1 {}; /** + * This property is useful if using rusEFI as TCM or BCM only offset 912 bit 6 */ - bool unusedBitLDBS : 1 {}; + bool consumeObdSensors : 1 {}; /** * Read VSS from OEM CAN bus according to selected CAN vehicle configuration. offset 912 bit 7 */ @@ -2047,10 +2048,9 @@ struct engine_configuration_s { offset 912 bit 14 */ bool invertCamVVTSignal : 1 {}; /** - * This property is useful if using rusEFI as TCM or BCM only - * enable consumeObdSensors + * In Alpha-N mode, compensate for air temperature. offset 912 bit 15 */ - bool consumeObdSensors : 1 {}; + bool alphaNUseIat : 1 {}; /** offset 912 bit 16 */ bool knockBankCyl1 : 1 {}; @@ -5311,4 +5311,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:38 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:26 UTC 2023 diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index c97fb89c53..a5c0d5ab84 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -794,7 +794,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 2026625145 +#define SIGNATURE_HASH 2902544520 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1086,7 +1086,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.2026625145" +#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.2902544520" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h index e6bd80ee94..13fefc8eb5 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:37 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:25 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -2015,8 +2015,9 @@ struct engine_configuration_s { offset 912 bit 5 */ bool unfinishedenableLaunchBoost : 1 {}; /** + * This property is useful if using rusEFI as TCM or BCM only offset 912 bit 6 */ - bool unusedBitLDBS : 1 {}; + bool consumeObdSensors : 1 {}; /** * Read VSS from OEM CAN bus according to selected CAN vehicle configuration. offset 912 bit 7 */ @@ -2047,10 +2048,9 @@ struct engine_configuration_s { offset 912 bit 14 */ bool invertCamVVTSignal : 1 {}; /** - * This property is useful if using rusEFI as TCM or BCM only - * enable consumeObdSensors + * In Alpha-N mode, compensate for air temperature. offset 912 bit 15 */ - bool consumeObdSensors : 1 {}; + bool alphaNUseIat : 1 {}; /** offset 912 bit 16 */ bool knockBankCyl1 : 1 {}; @@ -5311,4 +5311,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:37 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:25 UTC 2023 diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 4de8ca0e58..eba3d7190b 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -794,7 +794,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 270301877 +#define SIGNATURE_HASH 3319198276 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1086,7 +1086,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.270301877" +#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.3319198276" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h index 29e974e581..91dd33a753 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:39 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:27 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -2015,8 +2015,9 @@ struct engine_configuration_s { offset 912 bit 5 */ bool unfinishedenableLaunchBoost : 1 {}; /** + * This property is useful if using rusEFI as TCM or BCM only offset 912 bit 6 */ - bool unusedBitLDBS : 1 {}; + bool consumeObdSensors : 1 {}; /** * Read VSS from OEM CAN bus according to selected CAN vehicle configuration. offset 912 bit 7 */ @@ -2047,10 +2048,9 @@ struct engine_configuration_s { offset 912 bit 14 */ bool invertCamVVTSignal : 1 {}; /** - * This property is useful if using rusEFI as TCM or BCM only - * enable consumeObdSensors + * In Alpha-N mode, compensate for air temperature. offset 912 bit 15 */ - bool consumeObdSensors : 1 {}; + bool alphaNUseIat : 1 {}; /** offset 912 bit 16 */ bool knockBankCyl1 : 1 {}; @@ -5311,4 +5311,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:39 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:27 UTC 2023 diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index 11d63817dc..4ca856b296 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -1032,7 +1032,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2135301998 +#define SIGNATURE_HASH 2861340575 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1324,7 +1324,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.2135301998" +#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.2861340575" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/engine_configuration_generated_structures.h b/firmware/controllers/generated/engine_configuration_generated_structures.h index 0851e1f505..360b4b1582 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:36 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -2015,8 +2015,9 @@ struct engine_configuration_s { offset 912 bit 5 */ bool unfinishedenableLaunchBoost : 1 {}; /** + * This property is useful if using rusEFI as TCM or BCM only offset 912 bit 6 */ - bool unusedBitLDBS : 1 {}; + bool consumeObdSensors : 1 {}; /** * Read VSS from OEM CAN bus according to selected CAN vehicle configuration. offset 912 bit 7 */ @@ -2047,10 +2048,9 @@ struct engine_configuration_s { offset 912 bit 14 */ bool invertCamVVTSignal : 1 {}; /** - * This property is useful if using rusEFI as TCM or BCM only - * enable consumeObdSensors + * In Alpha-N mode, compensate for air temperature. offset 912 bit 15 */ - bool consumeObdSensors : 1 {}; + bool alphaNUseIat : 1 {}; /** offset 912 bit 16 */ bool knockBankCyl1 : 1 {}; @@ -5311,4 +5311,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:36 UTC 2023 diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 7724e0d35d..864897f96f 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -1085,7 +1085,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 3688057410 +#define SIGNATURE_HASH 236569267 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1377,7 +1377,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.3688057410" +#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.236569267" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index 964ca2c4ca..317b744489 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1007767747 -#define TS_SIGNATURE "rusEFI master.2023.09.17.48way.1007767747" +#define SIGNATURE_HASH 3923499058 +#define TS_SIGNATURE "rusEFI master.2023.09.17.48way.3923499058" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index 2cfc56dabe..f21080a304 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3745737963 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-2chan.3745737963" +#define SIGNATURE_HASH 176808986 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-2chan.176808986" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index c4b9d0f5ba..88c133aa5e 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 412354324 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan.412354324" +#define SIGNATURE_HASH 3445526501 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan.3445526501" diff --git a/firmware/controllers/generated/signature_alphax-4chan_f7.h b/firmware/controllers/generated/signature_alphax-4chan_f7.h index ca585cb4cd..0afb9fcea7 100644 --- a/firmware/controllers/generated/signature_alphax-4chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 412354324 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan_f7.412354324" +#define SIGNATURE_HASH 3445526501 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan_f7.3445526501" diff --git a/firmware/controllers/generated/signature_alphax-8chan-revA.h b/firmware/controllers/generated/signature_alphax-8chan-revA.h index 532ef2c086..4ed841b8c2 100644 --- a/firmware/controllers/generated/signature_alphax-8chan-revA.h +++ b/firmware/controllers/generated/signature_alphax-8chan-revA.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1228408442 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan-revA.1228408442" +#define SIGNATURE_HASH 2633141899 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan-revA.2633141899" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index ba1c1b68e1..e6f70409f9 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1972873201 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan.1972873201" +#define SIGNATURE_HASH 2690461440 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan.2690461440" diff --git a/firmware/controllers/generated/signature_alphax-8chan_f7.h b/firmware/controllers/generated/signature_alphax-8chan_f7.h index 35e265d893..1ca487745e 100644 --- a/firmware/controllers/generated/signature_alphax-8chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1972873201 -#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan_f7.1972873201" +#define SIGNATURE_HASH 2690461440 +#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan_f7.2690461440" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index ff9b84116e..825f676e4d 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1677798750 -#define TS_SIGNATURE "rusEFI master.2023.09.17.atlas.1677798750" +#define SIGNATURE_HASH 2982913455 +#define TS_SIGNATURE "rusEFI master.2023.09.17.atlas.2982913455" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index 4b2099145a..054a428719 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1089263055 -#define TS_SIGNATURE "rusEFI master.2023.09.17.core8.1089263055" +#define SIGNATURE_HASH 2502319422 +#define TS_SIGNATURE "rusEFI master.2023.09.17.core8.2502319422" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index ed5b429eef..d4d1b072c3 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.2902544520" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 0b01b4a320..4a653c3593 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3688057410 -#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.3688057410" +#define SIGNATURE_HASH 236569267 +#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.236569267" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 17db99c11c..2f59bb1de4 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.f429-discovery.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.f429-discovery.2902544520" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 92ab0537c3..7f489c4954 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1519990963 -#define TS_SIGNATURE "rusEFI master.2023.09.17.frankenso_na6.1519990963" +#define SIGNATURE_HASH 2404626498 +#define TS_SIGNATURE "rusEFI master.2023.09.17.frankenso_na6.2404626498" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index 17c253e345..15f841a3d3 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3137497123 -#define TS_SIGNATURE "rusEFI master.2023.09.17.harley81.3137497123" +#define SIGNATURE_HASH 1858658514 +#define TS_SIGNATURE "rusEFI master.2023.09.17.harley81.1858658514" diff --git a/firmware/controllers/generated/signature_hellen-112-17.h b/firmware/controllers/generated/signature_hellen-112-17.h index 048a618b39..1103e247c0 100644 --- a/firmware/controllers/generated/signature_hellen-112-17.h +++ b/firmware/controllers/generated/signature_hellen-112-17.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1466036059 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-112-17.1466036059" +#define SIGNATURE_HASH 2192271274 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-112-17.2192271274" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index c9b8a11d39..82aaab6bd7 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3359207049 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-gm-e67.3359207049" +#define SIGNATURE_HASH 502523512 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-gm-e67.502523512" diff --git a/firmware/controllers/generated/signature_hellen-honda-k.h b/firmware/controllers/generated/signature_hellen-honda-k.h index 2234235380..57aad871b7 100644 --- a/firmware/controllers/generated/signature_hellen-honda-k.h +++ b/firmware/controllers/generated/signature_hellen-honda-k.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3468219869 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-honda-k.3468219869" +#define SIGNATURE_HASH 460479788 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-honda-k.460479788" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index f1e58d1289..aef619638d 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 386520430 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-nb1.386520430" +#define SIGNATURE_HASH 3267583391 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-nb1.3267583391" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 5ffb4e1658..bb0728acac 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4138669293 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121nissan.4138669293" +#define SIGNATURE_HASH 593861660 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121nissan.593861660" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 8a2137fded..e957fae123 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3971336122 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121vag.3971336122" +#define SIGNATURE_HASH 964644683 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121vag.964644683" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 1ae866c5d5..4a6fd7907e 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3071893267 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen128.3071893267" +#define SIGNATURE_HASH 1658050530 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen128.1658050530" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index de4cafaae4..adfee8161f 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1844127937 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen154hyundai.1844127937" +#define SIGNATURE_HASH 3089211440 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen154hyundai.3089211440" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 588ed48dba..9ba866ae68 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 344972884 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen72.344972884" +#define SIGNATURE_HASH 3242546853 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen72.3242546853" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 613e743d28..38609c2608 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2409323668 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen81.2409323668" +#define SIGNATURE_HASH 1515312229 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen81.1515312229" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 44c13b52fc..9095515f38 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2532201917 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen88bmw.2532201917" +#define SIGNATURE_HASH 1126489420 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen88bmw.1126489420" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index 7aacab03c9..c139f72054 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2479244381 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA6.2479244381" +#define SIGNATURE_HASH 1175243948 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA6.1175243948" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 23d0f0ccce..e3aac6c63f 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4117189778 -#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA8_96.4117189778" +#define SIGNATURE_HASH 548265059 +#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA8_96.548265059" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index dd064328bf..429d9045dc 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 270301877 -#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.270301877" +#define SIGNATURE_HASH 3319198276 +#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.3319198276" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index 990abf460e..1f4907edc6 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1659946103 -#define TS_SIGNATURE "rusEFI master.2023.09.17.m74_9.1659946103" +#define SIGNATURE_HASH 3074051206 +#define TS_SIGNATURE "rusEFI master.2023.09.17.m74_9.3074051206" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index e0bd6ad8d5..50b83459ff 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 865400803 -#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f4.865400803" +#define SIGNATURE_HASH 3864952594 +#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f4.3864952594" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index df059359b0..657e4f6e37 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 865400803 -#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f7.865400803" +#define SIGNATURE_HASH 3864952594 +#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f7.3864952594" diff --git a/firmware/controllers/generated/signature_nucleo_f429.h b/firmware/controllers/generated/signature_nucleo_f429.h index bf26bc430f..c898eb8a56 100644 --- a/firmware/controllers/generated/signature_nucleo_f429.h +++ b/firmware/controllers/generated/signature_nucleo_f429.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f429.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f429.2902544520" diff --git a/firmware/controllers/generated/signature_nucleo_f767.h b/firmware/controllers/generated/signature_nucleo_f767.h index 3ca0b721d4..f5cf1263d2 100644 --- a/firmware/controllers/generated/signature_nucleo_f767.h +++ b/firmware/controllers/generated/signature_nucleo_f767.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f767.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f767.2902544520" diff --git a/firmware/controllers/generated/signature_nucleo_h743.h b/firmware/controllers/generated/signature_nucleo_h743.h index b5d46e9aac..ac704bb001 100644 --- a/firmware/controllers/generated/signature_nucleo_h743.h +++ b/firmware/controllers/generated/signature_nucleo_h743.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_h743.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_h743.2902544520" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index d615bc2138..e0f4a99edb 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1214191081 -#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_405.1214191081" +#define SIGNATURE_HASH 2643827992 +#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_405.2643827992" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index d7767a53cd..b7d90d9b9f 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1214191081 -#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_469.1214191081" +#define SIGNATURE_HASH 2643827992 +#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_469.2643827992" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index a92f187422..6dfceefd4a 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2027431427 -#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f4.2027431427" +#define SIGNATURE_HASH 2903682802 +#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f4.2903682802" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index f400d72913..45f326c6e2 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2027431427 -#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f7.2027431427" +#define SIGNATURE_HASH 2903682802 +#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f7.2903682802" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 411eedf419..8c0941c7a7 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2027431427 -#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_h7.2027431427" +#define SIGNATURE_HASH 2903682802 +#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_h7.2903682802" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 93ebec552a..7a69e4dd22 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 479214885 -#define TS_SIGNATURE "rusEFI master.2023.09.17.s105.479214885" +#define SIGNATURE_HASH 3378165204 +#define TS_SIGNATURE "rusEFI master.2023.09.17.s105.3378165204" diff --git a/firmware/controllers/generated/signature_small-can.h b/firmware/controllers/generated/signature_small-can.h index 359b20c400..e8187713be 100644 --- a/firmware/controllers/generated/signature_small-can.h +++ b/firmware/controllers/generated/signature_small-can.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3049804528 -#define TS_SIGNATURE "rusEFI master.2023.09.17.small-can.3049804528" +#define SIGNATURE_HASH 1610799617 +#define TS_SIGNATURE "rusEFI master.2023.09.17.small-can.1610799617" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 03f4ee2a2f..d2fcec1599 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2135301998 -#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.2135301998" +#define SIGNATURE_HASH 2861340575 +#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.2861340575" diff --git a/firmware/controllers/generated/signature_t-b-g.h b/firmware/controllers/generated/signature_t-b-g.h index b9c8375891..cbfc841d9c 100644 --- a/firmware/controllers/generated/signature_t-b-g.h +++ b/firmware/controllers/generated/signature_t-b-g.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2026625145 -#define TS_SIGNATURE "rusEFI master.2023.09.17.t-b-g.2026625145" +#define SIGNATURE_HASH 2902544520 +#define TS_SIGNATURE "rusEFI master.2023.09.17.t-b-g.2902544520" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 406ed961cb..c5f639ef79 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4066767963 -#define TS_SIGNATURE "rusEFI master.2023.09.17.tdg-pdm8.4066767963" +#define SIGNATURE_HASH 665812138 +#define TS_SIGNATURE "rusEFI master.2023.09.17.tdg-pdm8.665812138" diff --git a/firmware/controllers/lua/generated/value_lookup_generated.cpp b/firmware/controllers/lua/generated/value_lookup_generated.cpp index 48cb79e79c..bc7ba70b05 100644 --- a/firmware/controllers/lua/generated/value_lookup_generated.cpp +++ b/firmware/controllers/lua/generated/value_lookup_generated.cpp @@ -550,6 +550,9 @@ float getConfigValueByName(const char *name) { // unfinishedenableLaunchBoost case -246028069: return engineConfiguration->unfinishedenableLaunchBoost; +// consumeObdSensors + case 950993889: + return engineConfiguration->consumeObdSensors; // enableCanVss case 245947066: return engineConfiguration->enableCanVss; @@ -574,9 +577,9 @@ float getConfigValueByName(const char *name) { // invertCamVVTSignal case 1081026348: return engineConfiguration->invertCamVVTSignal; -// consumeObdSensors - case 950993889: - return engineConfiguration->consumeObdSensors; +// alphaNUseIat + case -253720028: + return engineConfiguration->alphaNUseIat; // knockBankCyl1 case 1509355728: return engineConfiguration->knockBankCyl1; @@ -2545,6 +2548,11 @@ bool setConfigValueByName(const char *name, float value) { { engineConfiguration->unfinishedenableLaunchBoost = (int)value; return 1; + } + case 950993889: + { + engineConfiguration->consumeObdSensors = (int)value; + return 1; } case 245947066: { @@ -2586,9 +2594,9 @@ bool setConfigValueByName(const char *name, float value) { engineConfiguration->invertCamVVTSignal = (int)value; return 1; } - case 950993889: + case -253720028: { - engineConfiguration->consumeObdSensors = (int)value; + engineConfiguration->alphaNUseIat = (int)value; return 1; } case 1509355728: diff --git a/firmware/controllers/lua/generated/value_lookup_generated.md b/firmware/controllers/lua/generated/value_lookup_generated.md index 85e81d0b9a..759c7f9397 100644 --- a/firmware/controllers/lua/generated/value_lookup_generated.md +++ b/firmware/controllers/lua/generated/value_lookup_generated.md @@ -544,6 +544,9 @@ If enabled we use two H-bridges to drive stepper idle air valve ### unfinishedenableLaunchBoost +### consumeObdSensors +This property is useful if using rusEFI as TCM or BCM only + ### enableCanVss Read VSS from OEM CAN bus according to selected CAN vehicle configuration. @@ -568,8 +571,8 @@ Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details ### invertCamVVTSignal get invertCamVVTSignal -### consumeObdSensors -This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors +### alphaNUseIat +In Alpha-N mode, compensate for air temperature. ### knockBankCyl1 diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 45ec32ee2d..0d1bd26a6a 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.f407-discovery.3688057410" + signature = "rusEFI master.2023.09.17.f407-discovery.236569267" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.f407-discovery.3688057410" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.f407-discovery.236569267" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:36 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index 2e75ea90a0..b531715912 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.48way.1007767747" + signature = "rusEFI master.2023.09.17.48way.3923499058" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.48way.1007767747" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.48way.3923499058" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Battery Reference Input (A0)","TPS Reference Input (A1)","CLT Reference Input (A2)","IAT Reference Input (A3)","O2 Reference Input (A4)","INVALID","INVALID","INVALID","MAP Pressure Reference Input (B0)","BARO Pressure Reference Input (B1)","INVALID","INVALID","INVALID","INVALID","Fuel Pressure Reference Input (C4)","Oil Pressure Reference Input (C5)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:45 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:43 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index d8517a4257..76a45bfa45 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-2chan.3745737963" + signature = "rusEFI master.2023.09.17.alphax-2chan.176808986" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-2chan.3745737963" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-2chan.176808986" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:33 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:30 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6183,6 +6184,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index cb864fa716..95ad3f51cd 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-4chan.412354324" + signature = "rusEFI master.2023.09.17.alphax-4chan.3445526501" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-4chan.412354324" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-4chan.3445526501" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:36 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:33 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini index 767bfdbd27..131c6cb4ba 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-4chan_f7.412354324" + signature = "rusEFI master.2023.09.17.alphax-4chan_f7.3445526501" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-4chan_f7.412354324" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-4chan_f7.3445526501" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:39 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:36 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini index 0183e2c30f..fd17060457 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-8chan-revA.1228408442" + signature = "rusEFI master.2023.09.17.alphax-8chan-revA.2633141899" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-8chan-revA.1228408442" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-8chan-revA.2633141899" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:48 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:46 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 29ba37cf12..c053cf08ca 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-8chan.1972873201" + signature = "rusEFI master.2023.09.17.alphax-8chan.2690461440" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-8chan.1972873201" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-8chan.2690461440" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:40 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini index b3ad9d2122..7d3769cab1 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.alphax-8chan_f7.1972873201" + signature = "rusEFI master.2023.09.17.alphax-8chan_f7.2690461440" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.alphax-8chan_f7.1972873201" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.alphax-8chan_f7.2690461440" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:45 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:43 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 8f4ac3615f..f00a014611 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.atlas.1677798750" + signature = "rusEFI master.2023.09.17.atlas.2982913455" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.atlas.1677798750" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.atlas.2982913455" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:24 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index a8361430ff..039161c6b2 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.core8.1089263055" + signature = "rusEFI master.2023.09.17.core8.2502319422" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.core8.1089263055" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.core8.2502319422" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","On-board Battery Sense (A0)","Analog Inputs 1 (A1)","Analog Inputs 2 (A2)","Analog Inputs 3 (A3)","Analog Inputs 4 (A4)","On-board MAP (A5)","Analog Inputs 6 (A6)","Analog Inputs 7 (A7)","On-board BARO (B0)","Analog Inputs 9 (B1)","Analog Inputs 10 (C0)","Primary On-board O2 (C1)","Secondary On-board O2 (C2)","Analog Inputs 13 (C3)","Analog Inputs 14 (C4)","Analog Inputs 15 (C5)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:40 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index 8cbfeb6dda..b16520cbbc 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.cypress.2026625145" + signature = "rusEFI master.2023.09.17.cypress.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.cypress.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.cypress.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:26 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 3f95ec6b43..2c6bd71576 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.f407-discovery.3688057410" + signature = "rusEFI master.2023.09.17.f407-discovery.236569267" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.f407-discovery.3688057410" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.f407-discovery.236569267" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:36 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:30 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6187,6 +6188,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index f2f2462c6e..681f8bb19f 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.f429-discovery.2026625145" + signature = "rusEFI master.2023.09.17.f429-discovery.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.f429-discovery.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.f429-discovery.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:17 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:13 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index 84711e7942..d7f39dab71 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.frankenso_na6.1519990963" + signature = "rusEFI master.2023.09.17.frankenso_na6.2404626498" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.frankenso_na6.1519990963" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.frankenso_na6.2404626498" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:58 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:55 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index c06504c962..322e993d2f 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.harley81.3137497123" + signature = "rusEFI master.2023.09.17.harley81.1858658514" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.harley81.3137497123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.harley81.1858658514" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","27 - TPS 2","INVALID","41 - PPS 1","52 - TPS 1","5 Battery Sense","INVALID","INVALID","42 - PPS 2","INVALID","53 - MAP","55 Engine Temperature","49 CLT","72 IAT","32 Oil Pressure","34 Kickstand Position Sensor" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:50 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:49 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini index 707cb1a94f..139132b48a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen-112-17.1466036059" + signature = "rusEFI master.2023.09.17.hellen-112-17.2192271274" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen-112-17.1466036059" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen-112-17.2192271274" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","114 Analog Input","INVALID","121 PPS1","203 TPS Throttle Position 1","INVALID","107 TODO","119 Analog Input","110 Analog Input","INVALID","219 MAP","109 Analog Input","215 CLT","227 IAT","111 Analog Input","112 Analog Input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:12 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:10 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index b166426cda..c623977411 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen-gm-e67.3359207049" + signature = "rusEFI master.2023.09.17.hellen-gm-e67.502523512" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen-gm-e67.3359207049" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen-gm-e67.502523512" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:23 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:23 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini index 2efa2de6e9..b15a505a13 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen-honda-k.3468219869" + signature = "rusEFI master.2023.09.17.hellen-honda-k.460479788" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen-honda-k.3468219869" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen-honda-k.460479788" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","INVALID","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:03 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:01 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index a8fab95939..e151e72859 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen-nb1.386520430" + signature = "rusEFI master.2023.09.17.hellen-nb1.3267583391" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen-nb1.386520430" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen-nb1.3267583391" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:20 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:20 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index c675c54430..4d15bba677 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen121nissan.4138669293" + signature = "rusEFI master.2023.09.17.hellen121nissan.593861660" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen121nissan.4138669293" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen121nissan.593861660" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:00 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:58 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 2eed6c12ad..1ef9dc93eb 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen121vag.3971336122" + signature = "rusEFI master.2023.09.17.hellen121vag.964644683" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen121vag.3971336122" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen121vag.964644683" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:57 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:55 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index ba891fde00..407b3b11d6 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen128.3071893267" + signature = "rusEFI master.2023.09.17.hellen128.1658050530" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen128.3071893267" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen128.1658050530" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:53 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:52 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 58b2ca2e24..d8341c5ed3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen154hyundai.1844127937" + signature = "rusEFI master.2023.09.17.hellen154hyundai.3089211440" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen154hyundai.1844127937" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen154hyundai.3089211440" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:06 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:04 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index e495e0a61a..133a7ea4f0 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen72.344972884" + signature = "rusEFI master.2023.09.17.hellen72.3242546853" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen72.344972884" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen72.3242546853" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:15 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:14 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index d78bafbcda..42d2c759bd 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen81.2409323668" + signature = "rusEFI master.2023.09.17.hellen81.1515312229" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen81.2409323668" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen81.1515312229" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:17 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:17 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6184,6 +6185,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 375ec4c4cc..3e5cc63541 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellen88bmw.2532201917" + signature = "rusEFI master.2023.09.17.hellen88bmw.1126489420" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellen88bmw.2532201917" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellen88bmw.1126489420" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:09 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:07 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 3a7c08b336..7c722c5575 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellenNA6.2479244381" + signature = "rusEFI master.2023.09.17.hellenNA6.1175243948" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellenNA6.2479244381" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellenNA6.1175243948" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:26 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:25 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 29b2c62671..ec39112edd 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.hellenNA8_96.4117189778" + signature = "rusEFI master.2023.09.17.hellenNA8_96.548265059" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.hellenNA8_96.4117189778" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.hellenNA8_96.548265059" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:28 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index 53dda2ebed..e9188d5714 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.kin.270301877" + signature = "rusEFI master.2023.09.17.kin.3319198276" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.kin.270301877" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.kin.3319198276" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:29 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:25 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index 86d1ff5108..c4690c30d1 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.m74_9.1659946103" + signature = "rusEFI master.2023.09.17.m74_9.3074051206" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.m74_9.1659946103" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.m74_9.3074051206" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:49 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:46 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index f16fc00a99..1b6652ac1b 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.mre_f4.865400803" + signature = "rusEFI master.2023.09.17.mre_f4.3864952594" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.mre_f4.865400803" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.mre_f4.3864952594" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:39 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:37 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6188,6 +6189,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index a1e4f09a1c..b155bb927d 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.mre_f7.865400803" + signature = "rusEFI master.2023.09.17.mre_f7.3864952594" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.mre_f7.865400803" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.mre_f7.3864952594" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:36 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:34 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6188,6 +6189,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini index 1b9695fa9b..717839ae89 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.nucleo_f429.2026625145" + signature = "rusEFI master.2023.09.17.nucleo_f429.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.nucleo_f429.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.nucleo_f429.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:20 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:15 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini index 92dc736c57..1e9b0fda65 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.nucleo_f767.2026625145" + signature = "rusEFI master.2023.09.17.nucleo_f767.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.nucleo_f767.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.nucleo_f767.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:23 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:18 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini index f608ea2f51..67b0b9f2f7 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.nucleo_h743.2026625145" + signature = "rusEFI master.2023.09.17.nucleo_h743.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.nucleo_h743.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.nucleo_h743.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:26 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:21 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 6fc71b321f..6f851edeb5 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.prometheus_405.1214191081" + signature = "rusEFI master.2023.09.17.prometheus_405.2643827992" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.prometheus_405.1214191081" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.prometheus_405.2643827992" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:04 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:00 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6180,6 +6181,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index b6be8301b7..6f77ebf659 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.prometheus_469.1214191081" + signature = "rusEFI master.2023.09.17.prometheus_469.2643827992" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.prometheus_469.1214191081" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.prometheus_469.2643827992" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:01 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:58 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6180,6 +6181,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 20d3b4cdff..3a844820b5 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.proteus_f4.2027431427" + signature = "rusEFI master.2023.09.17.proteus_f4.2903682802" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.proteus_f4.2027431427" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.proteus_f4.2903682802" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:10 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:06 UTC 2023 pageSize = 27468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6195,6 +6196,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index e823e33bcb..9ebbdfdea2 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.proteus_f7.2027431427" + signature = "rusEFI master.2023.09.17.proteus_f7.2903682802" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.proteus_f7.2027431427" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.proteus_f7.2903682802" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:07 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:03 UTC 2023 pageSize = 27468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6195,6 +6196,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index 05ba546cd9..c570ac827e 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.proteus_h7.2027431427" + signature = "rusEFI master.2023.09.17.proteus_h7.2903682802" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.proteus_h7.2027431427" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.proteus_h7.2903682802" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:14 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:09 UTC 2023 pageSize = 27468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6195,6 +6196,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index 158947c624..c0109c0d4c 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.s105.479214885" + signature = "rusEFI master.2023.09.17.s105.3378165204" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.s105.479214885" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.s105.3378165204" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:52 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:49 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6186,6 +6187,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_small-can.ini b/firmware/tunerstudio/generated/rusefi_small-can.ini index 7806838794..5a0eab5b00 100644 --- a/firmware/tunerstudio/generated/rusefi_small-can.ini +++ b/firmware/tunerstudio/generated/rusefi_small-can.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.small-can.3049804528" + signature = "rusEFI master.2023.09.17.small-can.1610799617" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.small-can.3049804528" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.small-can.1610799617" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - Analog input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","INVALID","INVALID","INVALID","B2 - Analog input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:33 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:31 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index 77249acdf6..f5ef6b481b 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.subaru_eg33_f7.2135301998" + signature = "rusEFI master.2023.09.17.subaru_eg33_f7.2861340575" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.subaru_eg33_f7.2135301998" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.subaru_eg33_f7.2861340575" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:00:30 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:47:27 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_t-b-g.ini b/firmware/tunerstudio/generated/rusefi_t-b-g.ini index bc47bca2df..a29416d011 100644 --- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini +++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.t-b-g.2026625145" + signature = "rusEFI master.2023.09.17.t-b-g.2902544520" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.t-b-g.2026625145" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.t-b-g.2902544520" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:01:55 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:48:52 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 180d69d037..dcd5eb458a 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.09.17.tdg-pdm8.4066767963" + signature = "rusEFI master.2023.09.17.tdg-pdm8.665812138" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.09.17.tdg-pdm8.4066767963" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.09.17.tdg-pdm8.665812138" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:32 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:27 UTC 2023 pageSize = 23468 page = 1 @@ -457,7 +457,7 @@ useHbridgesToDriveIdleStepper = bits, U32, 912, [2:2], "false", "true" multisparkEnable = bits, U32, 912, [3:3], "false", "true" enableLaunchRetard = bits, U32, 912, [4:4], "false", "true" unfinishedenableLaunchBoost = bits, U32, 912, [5:5], "false", "true" -unusedBitLDBS = bits, U32, 912, [6:6], "false", "true" +consumeObdSensors = bits, U32, 912, [6:6], "false", "true" enableCanVss = bits, U32, 912, [7:7], "false", "true" enableInnovateLC2 = bits, U32, 912, [8:8], "false", "true" showHumanReadableWarning = bits, U32, 912, [9:9], "false", "true" @@ -466,7 +466,7 @@ vvtBooleanForVerySpecialCases = bits, U32, 912, [11:11], "false", "true" enableSoftwareKnock = bits, U32, 912, [12:12], "false", "true" verboseVVTDecoding = bits, U32, 912, [13:13], "false", "true" invertCamVVTSignal = bits, U32, 912, [14:14], "false", "true" -consumeObdSensors = bits, U32, 912, [15:15], "false", "true" +alphaNUseIat = bits, U32, 912, [15:15], "false", "true" knockBankCyl1 = bits, U32, 912, [16:16], "Channel 1", "Channel 2" knockBankCyl2 = bits, U32, 912, [17:17], "Channel 1", "Channel 2" knockBankCyl3 = bits, U32, 912, [18:18], "Channel 1", "Channel 2" @@ -1706,11 +1706,12 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cdmInputPin = "Saab Combustion Detection Module knock signal input pin\nalso known as Saab Ion Sensing Module" sensorChartMode = "rusEFI console Sensor Sniffer mode" useHbridgesToDriveIdleStepper = "If enabled we use two H-bridges to drive stepper idle air valve" + consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only" enableCanVss = "Read VSS from OEM CAN bus according to selected CAN vehicle configuration." stftIgnoreErrorMagnitude = "If enabled, adjust at a constant rate instead of a rate proportional to the current lambda error. This mode may be easier to tune, and more tolerant of sensor noise. Use of this mode is required if you have a narrowband O2 sensor." verboseVVTDecoding = "Verbose info in console below engineSnifferRpmThreshold\nenable vvt_details" invertCamVVTSignal = "get invertCamVVTSignal" - consumeObdSensors = "This property is useful if using rusEFI as TCM or BCM only\nenable consumeObdSensors" + alphaNUseIat = "In Alpha-N mode, compensate for air temperature." useRawOutputToDriveIdleStepper = "If enabled we use four Push-Pull outputs to directly drive stepper idle air valve coilss" verboseCan2 = "Print incoming and outgoing second bus CAN messages in rusEFI console" etbIo1_controlPin = "Acts as EN pin in two-wire mode" @@ -6185,6 +6186,7 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Enabled", isInjectionEnabled field = "Mode", injectionMode, {isInjectionEnabled == 1} field = "#Batch injection with individual wiring" + field = "Alpha-N uses IAT density correction", alphaNUseIat, { fuelAlgorithm == 2 } field = "Override VE table load axis", veOverrideMode, { isInjectionEnabled } field = "Override AFR table load axis", afrOverrideMode, { isInjectionEnabled } field = "Injection phase control mode", injectionTimingMode, { isInjectionEnabled } diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index dcb230e4ee..08deed492d 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:02:42 UTC 2023 +// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 14:49:36 UTC 2023 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1025,6 +1025,7 @@ public class Fields { public static final int SentEtbType_FORD_TYPE_1 = 2; public static final int SentEtbType_GM_TYPE_1 = 1; public static final int SentEtbType_NONE = 0; + public static final int SIGNATURE_HASH = 236569267; public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin"; public static final int spi_device_e_SPI_DEVICE_1 = 1; public static final int spi_device_e_SPI_DEVICE_2 = 2; @@ -1249,7 +1250,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI master.2023.09.17.f407-discovery.3688057410"; + public static final String TS_SIGNATURE = "rusEFI master.2023.09.17.f407-discovery.236569267"; public static final char TS_SIMULATE_CAN = '>'; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; @@ -1721,6 +1722,7 @@ public class Fields { public static final Field MULTISPARKENABLE = Field.create("MULTISPARKENABLE", 912, FieldType.BIT, 3).setBaseOffset(0); public static final Field ENABLELAUNCHRETARD = Field.create("ENABLELAUNCHRETARD", 912, FieldType.BIT, 4).setBaseOffset(0); public static final Field UNFINISHEDENABLELAUNCHBOOST = Field.create("UNFINISHEDENABLELAUNCHBOOST", 912, FieldType.BIT, 5).setBaseOffset(0); + public static final Field CONSUMEOBDSENSORS = Field.create("CONSUMEOBDSENSORS", 912, FieldType.BIT, 6).setBaseOffset(0); public static final Field ENABLECANVSS = Field.create("ENABLECANVSS", 912, FieldType.BIT, 7).setBaseOffset(0); public static final Field ENABLEINNOVATELC2 = Field.create("ENABLEINNOVATELC2", 912, FieldType.BIT, 8).setBaseOffset(0); public static final Field SHOWHUMANREADABLEWARNING = Field.create("SHOWHUMANREADABLEWARNING", 912, FieldType.BIT, 9).setBaseOffset(0); @@ -1729,7 +1731,7 @@ public class Fields { public static final Field ENABLESOFTWAREKNOCK = Field.create("ENABLESOFTWAREKNOCK", 912, FieldType.BIT, 12).setBaseOffset(0); public static final Field VERBOSEVVTDECODING = Field.create("VERBOSEVVTDECODING", 912, FieldType.BIT, 13).setBaseOffset(0); public static final Field INVERTCAMVVTSIGNAL = Field.create("INVERTCAMVVTSIGNAL", 912, FieldType.BIT, 14).setBaseOffset(0); - public static final Field CONSUMEOBDSENSORS = Field.create("CONSUMEOBDSENSORS", 912, FieldType.BIT, 15).setBaseOffset(0); + public static final Field ALPHANUSEIAT = Field.create("ALPHANUSEIAT", 912, FieldType.BIT, 15).setBaseOffset(0); public static final Field KNOCKBANKCYL1 = Field.create("KNOCKBANKCYL1", 912, FieldType.BIT, 16).setBaseOffset(0); public static final Field KNOCKBANKCYL2 = Field.create("KNOCKBANKCYL2", 912, FieldType.BIT, 17).setBaseOffset(0); public static final Field KNOCKBANKCYL3 = Field.create("KNOCKBANKCYL3", 912, FieldType.BIT, 18).setBaseOffset(0); @@ -3244,6 +3246,7 @@ public class Fields { MULTISPARKENABLE, ENABLELAUNCHRETARD, UNFINISHEDENABLELAUNCHBOOST, + CONSUMEOBDSENSORS, ENABLECANVSS, ENABLEINNOVATELC2, SHOWHUMANREADABLEWARNING, @@ -3252,7 +3255,7 @@ public class Fields { ENABLESOFTWAREKNOCK, VERBOSEVVTDECODING, INVERTCAMVVTSIGNAL, - CONSUMEOBDSENSORS, + ALPHANUSEIAT, KNOCKBANKCYL1, KNOCKBANKCYL2, KNOCKBANKCYL3,