diff --git a/firmware/controllers/algo/engine_configuration.h b/firmware/controllers/algo/engine_configuration.h
index 713dd15708..fcec9e60fc 100644
--- a/firmware/controllers/algo/engine_configuration.h
+++ b/firmware/controllers/algo/engine_configuration.h
@@ -463,43 +463,35 @@ typedef struct {
 	 * offset 932
 	*/
 	injection_mode_e injectionMode;
-
-
 	/**
-	 * Inside rusEfi all the angles are handled in relation to the trigger synchronization event
-	 * which depends on the trigger shape and has nothing to do wit Top Dead Center (TDC)
-	 *
-	 * For engine configuration humans need angles from TDC.
-	 *
 	 * This field is the angle between Top Dead Center (TDC) and the first trigger event.
 	 * Knowing this angle allows us to control timing and other angles in reference to TDC.
-	 */
+	 * offset 936
+	*/
 	float globalTriggerAngleOffset;
 	/**
-	 * We have 3.3V ADC and most of the analog input signals are 5V, this forces us to use
-	 * voltage dividers on the input circuits. This parameter holds the coefficient of these dividers.
-	 * see also vbattDividerCoeff
-	 */
+	 * This parameter holds the coefficient of input voltage dividers
+	 * offset 940
+	*/
 	float analogInputDividerCoefficient;
-
 	/**
 	 * This setting controls which algorithm is used for ENGINE LOAD
-	 */
+	 * offset 944
+	*/
 	engine_load_mode_e algorithm;
-
 	/**
-	 * see
-	 */
+	 * offset 948
+	*/
 	float vbattDividerCoeff;
 	/**
 	 * Cooling fan turn-on temperature threshold, in Celsuis
 	 * offset 952
-	 */
+	*/
 	float fanOnTemperature;
 	/**
 	 * Cooling fan turn-off temperature threshold, in Celsuis
 	 * offset 956
-	 */
+	*/
 	float fanOffTemperature;
 
 	// offset 960
diff --git a/firmware/rusefi_config.ini b/firmware/rusefi_config.ini
index 09113ca926..ecba347c39 100644
--- a/firmware/rusefi_config.ini
+++ b/firmware/rusefi_config.ini
@@ -142,9 +142,17 @@ float displacement;Engine displacement, in liters\nsee also cylindersCount;"L",
 injection_mode_e crankingInjectionMode;
 	injection_mode_e injectionMode;
 
-float globalTriggerAngleOffset;
+float globalTriggerAngleOffset;This field is the angle between Top Dead Center (TDC) and the first trigger event.\nKnowing this angle allows us to control timing and other angles in reference to TDC.;"deg",    1,      0,       0,  720, 0
+float analogInputDividerCoefficient;This parameter holds the coefficient of input voltage dividers;"coef",    1,      0,    0.01,  10.0,   2
 
-bits analog_chart_e S32         [0:1], "none", "trigger", "MAP", "INVALID"		
-analog_chart_e analogChartMode;
+bits engine_load_mode_e U32 [0:1], "MAF", "Alpha-N", "MAP", "SPEED DENSITY"
+engine_load_mode_e algorithm;This setting controls which algorithm is used for ENGINE LOAD
+float vbattDividerCoeff;;"coef",    1,      0,    0.01,  20.0,        2
+float fanOnTemperature;Cooling fan turn-on temperature threshold, in Celsuis;"*C",    1,      0,       0,  1000.0,        2
+float fanOffTemperature;Cooling fan turn-off temperature threshold, in Celsuis;"*C",    1,      0,       0,  1000.0,        2
+
+
+!bits analog_chart_e S32         [0:1], "none", "trigger", "MAP", "INVALID"		
+!analog_chart_e analogChartMode;
 
 end_struct
\ No newline at end of file
diff --git a/firmware/tunerstudio/rusefi.ini b/firmware/tunerstudio/rusefi.ini
index 6ad31ea97c..0faf6979e1 100644
--- a/firmware/tunerstudio/rusefi.ini
+++ b/firmware/tunerstudio/rusefi.ini
@@ -100,13 +100,14 @@ enable2ndByteCanID = false
 	rpmHardLimit					= scalar, S32,	924,	"rpm", 1, 0, 0, 10000.0, 2
 ;skipping crankingInjectionMode offset 928
 ;skipping injectionMode offset 932
+	globalTriggerAngleOffset		= scalar, F32,	936,	"deg", 1, 0, 0, 720, 0
+	analogInputDividerCoefficient	= scalar, F32,	940,	"coef", 1, 0, 0.01, 10.0, 2
+	algorithm						= bits,	U32,	944,	[0:1], "MAF", "Alpha-N", "MAP", "SPEED DENSITY"
+	vbattDividerCoeff				= scalar, F32,	948,	"coef", 1, 0, 0.01, 20.0, 2
+	fanOnTemperature				= scalar, F32,	952,	"*C", 1, 0, 0, 1000.0, 2
+	fanOffTemperature				= scalar, F32,	956,	"*C", 1, 0, 0, 1000.0, 2
+
 
-	globalTriggerOffsetAngle = scalar, F32,    936,         "deg",    1,      0,       0,  720,      0 ; size 4
-	analogInputDividerCoefficient=scalar, F32, 940,         "coef",    1,      0,    0.01,  10.0,        2 ; size 4
-	fuelAlgorithm           = bits,    U32,    944, [0:1], "MAF", "Alpha-N", "MAP", "SPEED DENSITY"
-	VBattDividerCoefficient	= scalar,  F32,    948,         "coef",    1,      0,    0.01,  20.0,        2 ; size 4
-	FanONTemperature	    = scalar,  F32,    952,         "°C",    1,      0,       0,  1000.0,        2 ; size 4
-	FanOffTemperature	    = scalar,  F32,    956,         "°C",    1,      0,       0,  1000.0,        2 ; size 4
 ;	canNbcType              = bits,    U32,    968, [0:1], "BMW", "FIAT", "VAG" , "INVALID"
 	canSleepPeriod		    = scalar,  F32,    972,         "RPM",    1,      0,       0,  1000.0,        2 ; size 4
 	nCylinders   		    = bits,    U32,    976, [0:3], "INVALID", 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, "INVALID", "INVALID", "INVALID"