auto-sync

hardware/PowerSSO-24_breakout/PowerSSO-24_breakout.kicad_pcb

@@ -67,7 +67,7 @@
     (aux_axis_origin 0 0)
     (visible_elements 7FFFFB3F)
     (pcbplotparams
-      (layerselection 284983297)
+      (layerselection 3178497)
       (usegerberextensions true)
       (excludeedgelayer true)
       (linewidth 0.150000)
@@ -91,7 +91,7 @@
       (mirror false)
       (drillshape 0)
       (scaleselection 1)
-      (outputdirectory PowerSSO-24_breakout_gerbers))
+      (outputdirectory ""))
   )
 
   (net 0 "")

hardware/PowerSSO-24_breakout/PowerSSO-24_breakout.sch

@@ -30,13 +30,14 @@ LIBS:atmel
 LIBS:contrib
 LIBS:valves
 LIBS:vnd5e025aktr
+LIBS:PowerSSO-24_breakout-cache
 EELAYER 27 0
 EELAYER END
 $Descr A 11000 8500
 encoding utf-8
 Sheet 1 1
 Title "pOWERsso-24 breakout"
-Date "1 mar 2015"
+Date "2 mar 2015"
 Rev "R0.1"
 Comp "rusEFI"
 Comment1 ""
@@ -466,6 +467,6 @@ NoConn ~ 9650 6650
 NoConn ~ 9650 6750
 NoConn ~ 9650 6850
 NoConn ~ 9650 6950
-Text Notes 5500 3650 0    60   ~ 0
-10A PCB drive capable design \n\n5V / 10k = .5 mohms, then 3X potentail MCU on-states, so Is = 1.5mA.\n(Is is max on-state current)\n\nR101 <= .6V / .0015 = 400 ohms\nR101 >= -16V / .2A = 80 ohms
+Text Notes 6250 2950 0    60   ~ 0
+10A PCB drive capable design \n\n5V / 10k = .5 mohms, then 3X potentail MCU on-states, so Is = 1.5mA.\n(Is is max on-state current)\n\nR101 <= .6V / .0015 = 400 ohms\nR101 >= -16V / .2A = 80 ohms\n\nIf output P107 or P108 is not connected to a load, it's suggested to install a 22k \nohm resistor, in the unused connector. 
 $EndSCHEMATC

hardware/PowerSSO-24_breakout/known_issues.txt

@@ -1,3 +1,3 @@
-1) pin#1 mark for PowerSSO-24 chip
+1) add pin1 marker to footprint
 2) Larger diameter holes for GND, VCC and out wire holes. Larger diameter holes for input wires also, just in case
 3) larger diameter heatsink vias to simplify soldering