Auto-generated configs and docs

This commit is contained in:
GitHub gen-configs Action 2023-12-15 21:24:48 +00:00
parent c4e600747c
commit 5679414665
102 changed files with 402 additions and 358 deletions

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:42 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:54 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -741,7 +741,7 @@ struct engine_configuration_s {
bool overrideVvtTriggerGaps : 1 {};
/**
offset 120 bit 30 */
bool unused30 : 1 {};
bool useSpiImu : 1 {};
/**
offset 120 bit 31 */
bool unused31 : 1 {};
@ -5385,4 +5385,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 22088);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:42 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:54 UTC 2023

View File

@ -424,10 +424,7 @@
#define GAUGE_NAME_ACCEL_LON "Accel: Longitudinal"
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
#define GAUGE_NAME_ACCEL_VERT "Accel: Vertical"
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
#define GAUGE_NAME_ACCEL_YAW "Acceleration: Yaw"
#define GAUGE_NAME_ACCEL_Z "Acceleration: Z"
#define GAUGE_NAME_ADJUSTED_TIMING "Timing: ignition"
#define GAUGE_NAME_AFR "Air/Fuel Ratio"
#define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2"
@ -820,7 +817,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 4036453645
#define SIGNATURE_HASH 2445653161
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
#define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1119,7 +1116,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.12.15.cypress.4036453645"
#define TS_SIGNATURE "rusEFI master.2023.12.15.cypress.2445653161"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:40 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:53 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -741,7 +741,7 @@ struct engine_configuration_s {
bool overrideVvtTriggerGaps : 1 {};
/**
offset 120 bit 30 */
bool unused30 : 1 {};
bool useSpiImu : 1 {};
/**
offset 120 bit 31 */
bool unused31 : 1 {};
@ -5385,4 +5385,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 20712);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:40 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:53 UTC 2023

View File

@ -424,10 +424,7 @@
#define GAUGE_NAME_ACCEL_LON "Accel: Longitudinal"
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
#define GAUGE_NAME_ACCEL_VERT "Accel: Vertical"
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
#define GAUGE_NAME_ACCEL_YAW "Acceleration: Yaw"
#define GAUGE_NAME_ACCEL_Z "Acceleration: Z"
#define GAUGE_NAME_ADJUSTED_TIMING "Timing: ignition"
#define GAUGE_NAME_AFR "Air/Fuel Ratio"
#define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2"
@ -820,7 +817,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 2990973603
#define SIGNATURE_HASH 3541332743
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
#define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1119,7 +1116,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.12.15.kin.2990973603"
#define TS_SIGNATURE "rusEFI master.2023.12.15.kin.3541332743"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:43 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:55 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -741,7 +741,7 @@ struct engine_configuration_s {
bool overrideVvtTriggerGaps : 1 {};
/**
offset 120 bit 30 */
bool unused30 : 1 {};
bool useSpiImu : 1 {};
/**
offset 120 bit 31 */
bool unused31 : 1 {};
@ -5385,4 +5385,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 22088);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:33:43 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:55 UTC 2023

View File

@ -452,10 +452,7 @@
#define GAUGE_NAME_ACCEL_LON "Accel: Longitudinal"
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
#define GAUGE_NAME_ACCEL_VERT "Accel: Vertical"
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
#define GAUGE_NAME_ACCEL_YAW "Acceleration: Yaw"
#define GAUGE_NAME_ACCEL_Z "Acceleration: Z"
#define GAUGE_NAME_ADJUSTED_TIMING "Timing: ignition"
#define GAUGE_NAME_AFR "Air/Fuel Ratio"
#define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2"
@ -1058,7 +1055,7 @@
#define show_Frankenso_presets false
#define show_Proteus_presets false
#define show_test_presets false
#define SIGNATURE_HASH 4145717786
#define SIGNATURE_HASH 2521330622
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
#define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1357,7 +1354,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.12.15.subaru_eg33_f7.4145717786"
#define TS_SIGNATURE "rusEFI master.2023.12.15.subaru_eg33_f7.2521330622"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:35:28 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:47 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -741,7 +741,7 @@ struct engine_configuration_s {
bool overrideVvtTriggerGaps : 1 {};
/**
offset 120 bit 30 */
bool unused30 : 1 {};
bool useSpiImu : 1 {};
/**
offset 120 bit 31 */
bool unused31 : 1 {};
@ -5385,4 +5385,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 22088);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Dec 14 05:35:28 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:47 UTC 2023

View File

@ -460,10 +460,7 @@
#define GAUGE_NAME_ACCEL_LON "Accel: Longitudinal"
#define GAUGE_NAME_ACCEL_ROLL "Acceleration: Roll"
#define GAUGE_NAME_ACCEL_VERT "Accel: Vertical"
#define GAUGE_NAME_ACCEL_X "Acceleration: X"
#define GAUGE_NAME_ACCEL_Y "Acceleration: Y"
#define GAUGE_NAME_ACCEL_YAW "Acceleration: Yaw"
#define GAUGE_NAME_ACCEL_Z "Acceleration: Z"
#define GAUGE_NAME_ADJUSTED_TIMING "Timing: ignition"
#define GAUGE_NAME_AFR "Air/Fuel Ratio"
#define GAUGE_NAME_AFR2 "Air/Fuel Ratio 2"
@ -1146,7 +1143,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 1982463902
#define SIGNATURE_HASH 393948730
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
#define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1445,7 +1442,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.12.15.f407-discovery.1982463902"
#define TS_SIGNATURE "rusEFI master.2023.12.15.f407-discovery.393948730"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2162348298
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-2chan.2162348298"
#define SIGNATURE_HASH 3786408110
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-2chan.3786408110"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1843978063
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-4chan.1843978063"
#define SIGNATURE_HASH 213520107
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-4chan.213520107"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1843978063
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-4chan_f7.1843978063"
#define SIGNATURE_HASH 213520107
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-4chan_f7.213520107"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3244604174
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan-revA.3244604174"
#define SIGNATURE_HASH 2687920810
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan-revA.2687920810"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 515935917
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan.515935917"
#define SIGNATURE_HASH 2140299017
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan.2140299017"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 515935917
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan_f7.515935917"
#define SIGNATURE_HASH 2140299017
#define TS_SIGNATURE "rusEFI master.2023.12.15.alphax-8chan_f7.2140299017"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.at_start_f435.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.at_start_f435.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3029381443
#define TS_SIGNATURE "rusEFI master.2023.12.15.atlas.3029381443"
#define SIGNATURE_HASH 3586285799
#define TS_SIGNATURE "rusEFI master.2023.12.15.atlas.3586285799"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.cypress.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.cypress.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1982463902
#define TS_SIGNATURE "rusEFI master.2023.12.15.f407-discovery.1982463902"
#define SIGNATURE_HASH 393948730
#define TS_SIGNATURE "rusEFI master.2023.12.15.f407-discovery.393948730"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.f429-discovery.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.f429-discovery.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3258999710
#define TS_SIGNATURE "rusEFI master.2023.12.15.f469-discovery.3258999710"
#define SIGNATURE_HASH 2735911482
#define TS_SIGNATURE "rusEFI master.2023.12.15.f469-discovery.2735911482"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3536160199
#define TS_SIGNATURE "rusEFI master.2023.12.15.frankenso_na6.3536160199"
#define SIGNATURE_HASH 3013039203
#define TS_SIGNATURE "rusEFI master.2023.12.15.frankenso_na6.3013039203"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 710406419
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-112-17.710406419"
#define SIGNATURE_HASH 1258627255
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-112-17.1258627255"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1080415229
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-gm-e67.1080415229"
#define SIGNATURE_HASH 557253209
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-gm-e67.557253209"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 695687982
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-honda-k.695687982"
#define SIGNATURE_HASH 1210419850
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-honda-k.1210419850"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2673174554
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-nb1.2673174554"
#define SIGNATURE_HASH 4261919166
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen-nb1.4261919166"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1772192569
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen121nissan.1772192569"
#define SIGNATURE_HASH 150164125
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen121nissan.150164125"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1693022926
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen121vag.1693022926"
#define SIGNATURE_HASH 96185194
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen121vag.96185194"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1061544551
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen128.1061544551"
#define SIGNATURE_HASH 1578578883
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen128.1578578883"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3258216881
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen154hyundai.3258216881"
#define SIGNATURE_HASH 2741411861
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen154hyundai.2741411861"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2631099168
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen72.2631099168"
#define SIGNATURE_HASH 4253135492
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen72.4253135492"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 767858530
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen81.767858530"
#define SIGNATURE_HASH 1284916934
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen81.1284916934"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 515041481
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen88bmw.515041481"
#define SIGNATURE_HASH 2145401197
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellen88bmw.2145401197"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 463141161
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellenNA6.463141161"
#define SIGNATURE_HASH 2059937933
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellenNA6.2059937933"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2101078502
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellenNA8_96.2101078502"
#define SIGNATURE_HASH 476657730
#define TS_SIGNATURE "rusEFI master.2023.12.15.hellenNA8_96.476657730"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 2990973603
#define TS_SIGNATURE "rusEFI master.2023.12.15.kin.2990973603"
#define SIGNATURE_HASH 3541332743
#define TS_SIGNATURE "rusEFI master.2023.12.15.kin.3541332743"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2023346983
#define TS_SIGNATURE "rusEFI master.2023.12.15.m74_9.2023346983"
#define SIGNATURE_HASH 432734851
#define TS_SIGNATURE "rusEFI master.2023.12.15.m74_9.432734851"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3556412557
#define TS_SIGNATURE "rusEFI master.2023.12.15.mre_f4.3556412557"
#define SIGNATURE_HASH 2997378345
#define TS_SIGNATURE "rusEFI master.2023.12.15.mre_f4.2997378345"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3556412557
#define TS_SIGNATURE "rusEFI master.2023.12.15.mre_f7.3556412557"
#define SIGNATURE_HASH 2997378345
#define TS_SIGNATURE "rusEFI master.2023.12.15.mre_f7.2997378345"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f413.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f413.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f429.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f429.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f767.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_f767.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_h743.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.nucleo_h743.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3221465245
#define TS_SIGNATURE "rusEFI master.2023.12.15.prometheus_405.3221465245"
#define SIGNATURE_HASH 2706471225
#define TS_SIGNATURE "rusEFI master.2023.12.15.prometheus_405.2706471225"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3221465245
#define TS_SIGNATURE "rusEFI master.2023.12.15.prometheus_469.3221465245"
#define SIGNATURE_HASH 2706471225
#define TS_SIGNATURE "rusEFI master.2023.12.15.prometheus_469.2706471225"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4035222391
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_f4.4035222391"
#define SIGNATURE_HASH 2446740179
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_f4.2446740179"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4035222391
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_f7.4035222391"
#define SIGNATURE_HASH 2446740179
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_f7.2446740179"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4035222391
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_h7.4035222391"
#define SIGNATURE_HASH 2446740179
#define TS_SIGNATURE "rusEFI master.2023.12.15.proteus_h7.2446740179"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2679932267
#define TS_SIGNATURE "rusEFI master.2023.12.15.s105.2679932267"
#define SIGNATURE_HASH 4277032143
#define TS_SIGNATURE "rusEFI master.2023.12.15.s105.4277032143"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2415555381
#define TS_SIGNATURE "rusEFI master.2023.12.15.small-can-board.2415555381"
#define SIGNATURE_HASH 4004029073
#define TS_SIGNATURE "rusEFI master.2023.12.15.small-can-board.4004029073"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4145717786
#define TS_SIGNATURE "rusEFI master.2023.12.15.subaru_eg33_f7.4145717786"
#define SIGNATURE_HASH 2521330622
#define TS_SIGNATURE "rusEFI master.2023.12.15.subaru_eg33_f7.2521330622"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4036453645
#define TS_SIGNATURE "rusEFI master.2023.12.15.t-b-g.4036453645"
#define SIGNATURE_HASH 2445653161
#define TS_SIGNATURE "rusEFI master.2023.12.15.t-b-g.2445653161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2050574639
#define TS_SIGNATURE "rusEFI master.2023.12.15.tdg-pdm8.2050574639"
#define SIGNATURE_HASH 460036235
#define TS_SIGNATURE "rusEFI master.2023.12.15.tdg-pdm8.460036235"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 93145677
#define TS_SIGNATURE "rusEFI master.2023.12.15.uaefi.93145677"
#define SIGNATURE_HASH 1692376041
#define TS_SIGNATURE "rusEFI master.2023.12.15.uaefi.1692376041"

View File

@ -130,6 +130,9 @@ float getConfigValueByName(const char *name) {
// overrideVvtTriggerGaps
case 840966724:
return engineConfiguration->overrideVvtTriggerGaps;
// useSpiImu
case -1011866871:
return engineConfiguration->useSpiImu;
// tpsMin
case 513872736:
return engineConfiguration->tpsMin;
@ -1953,6 +1956,11 @@ bool setConfigValueByName(const char *name, float value) {
{
engineConfiguration->overrideVvtTriggerGaps = (int)value;
return 1;
}
case -1011866871:
{
engineConfiguration->useSpiImu = (int)value;
return 1;
}
case 513872736:
{

View File

@ -124,6 +124,9 @@ On some Ford and Toyota vehicles one of the pedal sensors is not linear on the f
### overrideVvtTriggerGaps
### useSpiImu
### tpsMin
Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.f407-discovery.1982463902"
signature = "rusEFI master.2023.12.15.f407-discovery.393948730"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.f407-discovery.1982463902" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.f407-discovery.393948730" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:48 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:47 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8051,7 +8051,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8722,6 +8722,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-2chan.2162348298"
signature = "rusEFI master.2023.12.15.alphax-2chan.3786408110"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-2chan.2162348298" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-2chan.3786408110" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:50:55 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:58 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8014,7 +8014,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8679,6 +8679,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-4chan.1843978063"
signature = "rusEFI master.2023.12.15.alphax-4chan.213520107"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-4chan.1843978063" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-4chan.213520107" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:50:58 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:01 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8018,7 +8018,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8690,6 +8690,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-4chan_f7.1843978063"
signature = "rusEFI master.2023.12.15.alphax-4chan_f7.213520107"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-4chan_f7.1843978063" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-4chan_f7.213520107" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:01 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:04 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8018,7 +8018,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8690,6 +8690,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-8chan-revA.3244604174"
signature = "rusEFI master.2023.12.15.alphax-8chan-revA.2687920810"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-8chan-revA.3244604174" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-8chan-revA.2687920810" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:09 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:12 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8018,7 +8018,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8684,6 +8684,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-8chan.515935917"
signature = "rusEFI master.2023.12.15.alphax-8chan.2140299017"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-8chan.515935917" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-8chan.2140299017" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:04 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:06 UTC 2023
pageSize = 22104
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8021,7 +8021,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8687,6 +8687,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.alphax-8chan_f7.515935917"
signature = "rusEFI master.2023.12.15.alphax-8chan_f7.2140299017"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.alphax-8chan_f7.515935917" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.alphax-8chan_f7.2140299017" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:07 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:09 UTC 2023
pageSize = 22104
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8021,7 +8021,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8687,6 +8687,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.at_start_f435.4036453645"
signature = "rusEFI master.2023.12.15.at_start_f435.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.at_start_f435.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.at_start_f435.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:44 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:43 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.atlas.3029381443"
signature = "rusEFI master.2023.12.15.atlas.3586285799"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.atlas.3029381443" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.atlas.3586285799" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:37 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:36 UTC 2023
pageSize = 21588
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8039,7 +8039,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8709,6 +8709,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.cypress.4036453645"
signature = "rusEFI master.2023.12.15.cypress.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.cypress.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.cypress.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:50:51 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:54 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.f407-discovery.1982463902"
signature = "rusEFI master.2023.12.15.f407-discovery.393948730"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.f407-discovery.1982463902" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.f407-discovery.393948730" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:42 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:40 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8051,7 +8051,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8722,6 +8722,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.f429-discovery.4036453645"
signature = "rusEFI master.2023.12.15.f429-discovery.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.f429-discovery.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.f429-discovery.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:22 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:21 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.f469-discovery.3258999710"
signature = "rusEFI master.2023.12.15.f469-discovery.2735911482"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.f469-discovery.3258999710" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.f469-discovery.2735911482" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:24 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:23 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.frankenso_na6.3536160199"
signature = "rusEFI master.2023.12.15.frankenso_na6.3013039203"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.frankenso_na6.3536160199" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.frankenso_na6.3013039203" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:06 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:06 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen-112-17.710406419"
signature = "rusEFI master.2023.12.15.hellen-112-17.1258627255"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen-112-17.710406419" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen-112-17.1258627255" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","B20 TPS Throttle Position 2","A14 Analog Input","INVALID","A21 PPS1","B03 TPS Throttle Position 1","INVALID","A07 TODO","A19 Analog Input","A10 Analog Input","INVALID","B19 MAP","A09 Analog Input","B15 CLT","B27 IAT","A11 Analog Input","A12 Analog Input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:31 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:33 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8015,7 +8015,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8671,6 +8671,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen-gm-e67.1080415229"
signature = "rusEFI master.2023.12.15.hellen-gm-e67.557253209"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen-gm-e67.1080415229" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen-gm-e67.557253209" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:42 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:43 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8690,6 +8690,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen-honda-k.695687982"
signature = "rusEFI master.2023.12.15.hellen-honda-k.1210419850"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen-honda-k.695687982" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen-honda-k.1210419850" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","Aux Analog 1","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT","Aux Analog 2","Aux Analog 3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:21 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:22 UTC 2023
pageSize = 22760
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8015,7 +8015,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8668,6 +8668,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen-nb1.2673174554"
signature = "rusEFI master.2023.12.15.hellen-nb1.4261919166"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen-nb1.2673174554" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen-nb1.4261919166" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:40 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:40 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8691,6 +8691,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen121nissan.1772192569"
signature = "rusEFI master.2023.12.15.hellen121nissan.150164125"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen121nissan.1772192569" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen121nissan.150164125" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:18 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:20 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8014,7 +8014,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8670,6 +8670,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen121vag.1693022926"
signature = "rusEFI master.2023.12.15.hellen121vag.96185194"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen121vag.1693022926" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen121vag.96185194" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:15 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:17 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8694,6 +8694,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen128.1061544551"
signature = "rusEFI master.2023.12.15.hellen128.1578578883"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen128.1061544551" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen128.1578578883" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:12 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:14 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8032,7 +8032,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8691,6 +8691,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen154hyundai.3258216881"
signature = "rusEFI master.2023.12.15.hellen154hyundai.2741411861"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen154hyundai.3258216881" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen154hyundai.2741411861" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:23 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:25 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8014,7 +8014,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8669,6 +8669,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen72.2631099168"
signature = "rusEFI master.2023.12.15.hellen72.4253135492"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen72.2631099168" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen72.4253135492" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:34 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:35 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8691,6 +8691,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen81.767858530"
signature = "rusEFI master.2023.12.15.hellen81.1284916934"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen81.767858530" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen81.1284916934" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:37 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:38 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8031,7 +8031,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8687,6 +8687,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellen88bmw.515041481"
signature = "rusEFI master.2023.12.15.hellen88bmw.2145401197"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellen88bmw.515041481" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellen88bmw.2145401197" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:26 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:28 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8030,7 +8030,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8686,6 +8686,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellenNA6.463141161"
signature = "rusEFI master.2023.12.15.hellenNA6.2059937933"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellenNA6.463141161" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellenNA6.2059937933" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:45 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:45 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8692,6 +8692,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.hellenNA8_96.2101078502"
signature = "rusEFI master.2023.12.15.hellenNA8_96.476657730"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.hellenNA8_96.2101078502" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.hellenNA8_96.476657730" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:48 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:48 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8690,6 +8690,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.kin.2990973603"
signature = "rusEFI master.2023.12.15.kin.3541332743"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.kin.2990973603" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.kin.3541332743" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:50:50 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:53 UTC 2023
pageSize = 20712
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8048,7 +8048,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8719,6 +8719,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.m74_9.2023346983"
signature = "rusEFI master.2023.12.15.m74_9.432734851"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.m74_9.2023346983" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.m74_9.432734851" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","MAF/MAP sensor signal","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Pedal position sensor 1 signal","Pedal position sensor 2 signal","ETB position sensor 1 signal","ETB position sensor 2 signal"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:58 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:58 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8692,6 +8692,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.mre_f4.3556412557"
signature = "rusEFI master.2023.12.15.mre_f4.2997378345"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.mre_f4.3556412557" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.mre_f4.2997378345" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:55 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:55 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8030,7 +8030,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8693,6 +8693,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.mre_f7.3556412557"
signature = "rusEFI master.2023.12.15.mre_f7.2997378345"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.mre_f7.3556412557" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.mre_f7.2997378345" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:53 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:53 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8030,7 +8030,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8693,6 +8693,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.nucleo_f413.4036453645"
signature = "rusEFI master.2023.12.15.nucleo_f413.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.nucleo_f413.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.nucleo_f413.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:27 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:26 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.nucleo_f429.4036453645"
signature = "rusEFI master.2023.12.15.nucleo_f429.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.nucleo_f429.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.nucleo_f429.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:29 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:28 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.nucleo_f767.4036453645"
signature = "rusEFI master.2023.12.15.nucleo_f767.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.nucleo_f767.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.nucleo_f767.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:32 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:31 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.nucleo_h743.4036453645"
signature = "rusEFI master.2023.12.15.nucleo_h743.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.nucleo_h743.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.nucleo_h743.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:34 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:33 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.prometheus_405.3221465245"
signature = "rusEFI master.2023.12.15.prometheus_405.2706471225"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.prometheus_405.3221465245" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.prometheus_405.2706471225" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:11 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:11 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8042,7 +8042,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8713,6 +8713,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.prometheus_469.3221465245"
signature = "rusEFI master.2023.12.15.prometheus_469.2706471225"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.prometheus_469.3221465245" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.prometheus_469.2706471225" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:09 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:08 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8042,7 +8042,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8713,6 +8713,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.proteus_f4.4035222391"
signature = "rusEFI master.2023.12.15.proteus_f4.2446740179"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.proteus_f4.4035222391" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.proteus_f4.2446740179" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:16 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:16 UTC 2023
pageSize = 26088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8034,7 +8034,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8702,6 +8702,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.proteus_f7.4035222391"
signature = "rusEFI master.2023.12.15.proteus_f7.2446740179"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.proteus_f7.4035222391" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.proteus_f7.2446740179" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:14 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:13 UTC 2023
pageSize = 26088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8034,7 +8034,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8702,6 +8702,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.proteus_h7.4035222391"
signature = "rusEFI master.2023.12.15.proteus_h7.2446740179"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.proteus_h7.4035222391" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.proteus_h7.2446740179" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:19 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:18 UTC 2023
pageSize = 26088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8034,7 +8034,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8702,6 +8702,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.s105.2679932267"
signature = "rusEFI master.2023.12.15.s105.4277032143"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.s105.2679932267" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.s105.4277032143" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:01 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:01 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8033,7 +8033,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8692,6 +8692,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.small-can-board.2415555381"
signature = "rusEFI master.2023.12.15.small-can-board.4004029073"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.small-can-board.2415555381" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.small-can-board.4004029073" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input","C4 - Analog/Digital Input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:51:50 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:23:50 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8038,7 +8038,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8709,6 +8709,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.subaru_eg33_f7.4145717786"
signature = "rusEFI master.2023.12.15.subaru_eg33_f7.2521330622"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.subaru_eg33_f7.4145717786" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.subaru_eg33_f7.2521330622" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:50:53 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:22:55 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8046,7 +8046,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8710,6 +8710,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.t-b-g.4036453645"
signature = "rusEFI master.2023.12.15.t-b-g.2445653161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.t-b-g.4036453645" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.t-b-g.2445653161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:03 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:03 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.12.15.tdg-pdm8.2050574639"
signature = "rusEFI master.2023.12.15.tdg-pdm8.460036235"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.12.15.tdg-pdm8.2050574639" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.12.15.tdg-pdm8.460036235" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 12:52:39 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Fri Dec 15 21:24:38 UTC 2023
pageSize = 22088
page = 1
@ -142,7 +142,7 @@ cltSensorPulldown = bits, U32, 120, [26:26], "false", "true"
iatSensorPulldown = bits, U32, 120, [27:27], "false", "true"
allowIdenticalPps = bits, U32, 120, [28:28], "false", "true"
overrideVvtTriggerGaps = bits, U32, 120, [29:29], "false", "true"
unused30 = bits, U32, 120, [30:30], "false", "true"
useSpiImu = bits, U32, 120, [30:30], "false", "true"
unused31 = bits, U32, 120, [31:31], "false", "true"
tpsMin = scalar, S16, 124, "ADC", 1, 0, 0, 1023, 0
tpsMax = scalar, S16, 126, "ADC", 1, 0, 0, 1023, 0
@ -8047,7 +8047,7 @@ dialog = lambda_monitorDialog, "lambda_monitor"
field = "CAN read enabled", canReadEnabled
field = "CAN write enabled", canWriteEnabled
field = "CAN dash type", canNbcType
field = "inertia measurement unit", imuType
field = "Inertia Measurement Unit", imuType
field = "Enable rusEFI CAN broadcast", enableVerboseCanTx
field = "rusEFI CAN data bus", canBroadcastUseChannelTwo
field = "rusEFI CAN data base address", verboseCanBaseAddress
@ -8718,6 +8718,7 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
dialog = harleyAcr, "Harley Automatic Compression Release"
field = "Pin", acrPin

Some files were not shown because too many files have changed in this diff Show More