diff --git a/firmware/integration/rusefi_config.txt b/firmware/integration/rusefi_config.txt
index a4bf54fdb4..59b0210148 100644
--- a/firmware/integration/rusefi_config.txt
+++ b/firmware/integration/rusefi_config.txt
@@ -1367,7 +1367,7 @@ custom stepper_num_micro_steps_e 1 bits, U08,	@OFFSET@,	[0:3], @@stepper_num_mic
 	int8_t launchFuelAdderPercent;;"%", 1, 0, 0, 100, 0
 	uint8_t autoscale etbJamTimeout;Time required to detect a stuck throttle.;"sec", 0.02, 0, 0, 5, 2
 	uint16_t etbExpAverageLength;By the way ETB PID runs at 500hz, length in 1/500 of second here.
-	float etbDutyThreshold
+	float unused645646
 
 	int16_t coastingFuelCutRpmHigh;This sets the RPM above which fuel cut is active.;"rpm", 1, 0, 0, 5000, 0
 	int16_t coastingFuelCutRpmLow;This sets the RPM below which fuel cut is deactivated, this prevents jerking or issues transitioning to idle;"rpm", 1, 0, 0, 5000, 0
@@ -1565,7 +1565,7 @@ uint16_t tuneHidingKey;;"", 1, 0, 0, 20000, 0
 #define HIGH_SPEED_COUNT 32
 uint16_t[HIGH_SPEED_COUNT] highSpeedOffsets;;"", 1.0000, 0.00000,0.00,65535, 0, noMsqSave
 
-float etbDutyShutdownThreshold
+float unused3124141
 
 #define fuel_pressure_sensor_mode_e_enum "Absolute", "Gauge", "Differential", "INVALID"
 custom fuel_pressure_sensor_mode_e 1 bits, U08, @OFFSET@, [0:1], @@fuel_pressure_sensor_mode_e_enum@@
@@ -2324,6 +2324,16 @@ end_struct
 #define ts_show_spi2_pins true
 #define ts_show_spi3_pins true
 #define ts_show_tps2 true
+#define ts_show_starter_disable true
+#define ts_show_fuel_pump true
+#define ts_show_status_leds true
+#define ts_show_idle_hardware true
+#define ts_show_hd true
+#define ts_show_odd_fire true
+#define ts_show_rotary true
+#define ts_show_tcu false
+#define ts_show_gdi false
+#define ts_show_air_conditioning true
 #define ts_show_onboard_accelerometer false
 #define ts_show_vvt_output true
 ! LAME! todo make this way less lame