rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

docs

This commit is contained in:
rusEfi 2019-08-18 14:11:15 -04:00
parent 898c605ad6
commit 70743de79e
6 changed files with 24 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/integration/rusefi_config.txt
View File

@ -524,7 +524,7 @@ float mapFrequency100Kpa;;"Hz", 1, 0, 0, 100000, 2
output_pin_e fuelPumpPin;
pin_output_mode_e fuelPumpPinMode;
output_pin_e malfunctionIndicatorPin;
output_pin_e malfunctionIndicatorPin;+Check engine light, also malfunction indicator light. Always blinks once on boot.
pin_output_mode_e malfunctionIndicatorPinMode;
pin_output_mode_e fanPinMode;
output_pin_e fanPin;

9
firmware/tunerstudio/rusefi.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 12:04:36 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 13:58:14 EDT 2019
pageSize = 20000
page = 1
@ -993,6 +993,7 @@ page = 1
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
vvtCamSensorUseRise = "Use rise or fall signal front"
@ -2611,8 +2612,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "ETB#2 Dir #2", etb2_directionPin2
field = "ETB#2 Control #1", etb2_controlPin1
field = "SD CS Pin", sdCardCsPin
field = "Check Engine Pin", malfunctionIndicatorPin
field = "Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
field = "MIL / Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "Aux Pin #1", auxPidPins1
field = "Aux Pin #2", auxPidPins2
field = "Aux Pin #3", auxPidPins3
@ -2706,7 +2707,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1}
field = "hip9011CsPin", hip9011CsPin
field = "LIS302DLCsPin", LIS302DLCsPin
field = "Malfunction Indicator", malfunctionIndicatorPin
field = "MIL / Check Engine", malfunctionIndicatorPin
field = "Saab CDM knock", cdmInputPin
field = "comm status light", communicationLedPin
field = "running status light", runningLedPin

6
firmware/tunerstudio/rusefi.input
View File

@ -1633,8 +1633,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "ETB#2 Dir #2", etb2_directionPin2 @@if_ts_show_etb_pins
field = "ETB#2 Control #1", etb2_controlPin1 @@if_ts_show_etb_pins
field = "SD CS Pin", sdCardCsPin
field = "Check Engine Pin", malfunctionIndicatorPin
field = "Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
field = "MIL / Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "Aux Pin #1", auxPidPins1
field = "Aux Pin #2", auxPidPins2
field = "Aux Pin #3", auxPidPins3
@ -1728,7 +1728,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1}
field = "hip9011CsPin", hip9011CsPin
field = "LIS302DLCsPin", LIS302DLCsPin
field = "Malfunction Indicator", malfunctionIndicatorPin
field = "MIL / Check Engine", malfunctionIndicatorPin
field = "Saab CDM knock", cdmInputPin
field = "comm status light", communicationLedPin
field = "running status light", runningLedPin

9
firmware/tunerstudio/rusefi_frankenso.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 12:04:42 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 13:58:37 EDT 2019
pageSize = 20000
page = 1
@ -993,6 +993,7 @@ page = 1
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
vvtCamSensorUseRise = "Use rise or fall signal front"
@ -2611,8 +2612,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "ETB#2 Dir #2", etb2_directionPin2
field = "ETB#2 Control #1", etb2_controlPin1
field = "SD CS Pin", sdCardCsPin
field = "Check Engine Pin", malfunctionIndicatorPin
field = "Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
field = "MIL / Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "Aux Pin #1", auxPidPins1
field = "Aux Pin #2", auxPidPins2
field = "Aux Pin #3", auxPidPins3
@ -2706,7 +2707,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1}
field = "hip9011CsPin", hip9011CsPin
field = "LIS302DLCsPin", LIS302DLCsPin
field = "Malfunction Indicator", malfunctionIndicatorPin
field = "MIL / Check Engine", malfunctionIndicatorPin
field = "Saab CDM knock", cdmInputPin
field = "comm status light", communicationLedPin
field = "running status light", runningLedPin

9
firmware/tunerstudio/rusefi_microrusefi.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 12:04:40 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 13:58:25 EDT 2019
pageSize = 20000
page = 1
@ -993,6 +993,7 @@ page = 1
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
vvtCamSensorUseRise = "Use rise or fall signal front"
@ -2598,8 +2599,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "Fuel Pump Pin", fuelPumpPin
field = "Fuel Pump Pin Mode", fuelPumpPinMode
field = "SD CS Pin", sdCardCsPin
field = "Check Engine Pin", malfunctionIndicatorPin
field = "Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
field = "MIL / Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "Aux Pin #1", auxPidPins1
field = "Aux Pin #2", auxPidPins2
field = "Aux Pin #3", auxPidPins3
@ -2691,7 +2692,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1}
field = "hip9011CsPin", hip9011CsPin
field = "LIS302DLCsPin", LIS302DLCsPin
field = "Malfunction Indicator", malfunctionIndicatorPin
field = "MIL / Check Engine", malfunctionIndicatorPin
field = "Saab CDM knock", cdmInputPin
field = "comm status light", communicationLedPin
field = "running status light", runningLedPin

9
firmware/tunerstudio/rusefi_prometheus.ini
View File

@ -82,7 +82,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 12:04:44 EDT 2019
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sun Aug 18 13:58:48 EDT 2019
pageSize = 20000
page = 1
@ -993,6 +993,7 @@ page = 1
camInputs4 = "Camshaft input could be used either just for engine phase detection if your trigger shape does not include cam sensor as 'primary' channel, or it could be used for Variable Valve timing on one of the camshafts.\nTODO #660"
throttlePedalUpPin = "Throttle Pedal not pressed switch - used on some older vehicles like early Mazda Miata"
triggerSimulatorFrequency = "See also triggerSimulatorPins\nSee also directSelfStimulation\nrpm X"
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
tachOutputPin = "This implementation produces one pulse per engine cycle. See also dizzySparkOutputPin."
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
vvtCamSensorUseRise = "Use rise or fall signal front"
@ -2607,8 +2608,8 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "ETB#2 Dir #2", etb2_directionPin2
field = "ETB#2 Control #1", etb2_controlPin1
field = "SD CS Pin", sdCardCsPin
field = "Check Engine Pin", malfunctionIndicatorPin
field = "Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "MIL / Check Engine Pin", malfunctionIndicatorPin
field = "MIL / Check Engine Pin Mode", malfunctionIndicatorPinMode
field = "Aux Pin #1", auxPidPins1
field = "Aux Pin #2", auxPidPins2
field = "Aux Pin #3", auxPidPins3
@ -2702,7 +2703,7 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
field = "SPI3 SCK", spi3sckPin, {is_enabled_spi_3 == 1}
field = "hip9011CsPin", hip9011CsPin
field = "LIS302DLCsPin", LIS302DLCsPin
field = "Malfunction Indicator", malfunctionIndicatorPin
field = "MIL / Check Engine", malfunctionIndicatorPin
field = "Saab CDM knock", cdmInputPin
field = "comm status light", communicationLedPin
field = "running status light", runningLedPin