rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

export board-specific macro for stm32 pins based on board yaml #3298

This commit is contained in:
rusefi 2023-08-27 23:10:13 -04:00 committed by rusefillc
parent 0f026220ca
commit 948d7161aa
34 changed files with 294 additions and 333 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
firmware/config/boards/Benelli_Walbro/connectors/Benelli_Walbro.yaml
View File

@ -1,4 +1,3 @@
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
# copyright: Michael Holzer
pins:

24
firmware/config/boards/hellen/alphax-2chan/board_configuration.cpp
View File

@ -70,12 +70,12 @@ static void setupDefaultSensorInputs() {
void boardInitHardware() {
alphaTachPullUp.initPin("a-tach", H144_OUT_IO1);
alphaTempPullUp.initPin("a-temp", H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", H144_OUT_IO2);
alphaCrankNPullUp.initPin("a-crank-n", H144_OUT_IO5);
alpha2stepPullDown.initPin("a-2step", H144_OUT_IO7);
alphaCamPullDown.initPin("a-cam", H144_OUT_IO8);
alphaTachPullUp.initPin("a-tach", Gpio::H144_OUT_IO1);
alphaTempPullUp.initPin("a-temp", Gpio::H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", Gpio::H144_OUT_IO2);
alphaCrankNPullUp.initPin("a-crank-n", Gpio::H144_OUT_IO5);
alpha2stepPullDown.initPin("a-2step", Gpio::H144_OUT_IO7);
alphaCamPullDown.initPin("a-cam", Gpio::H144_OUT_IO8);
boardOnConfigurationChange(nullptr);
}
@ -105,7 +105,7 @@ void setBoardConfigOverrides() {
configureHellenMegaAccCS2Pin();
setHellenMegaEnPin();
} else {
setHellenEnPin(H144_OUT_IO3);
setHellenEnPin(Gpio::H144_OUT_IO3);
}
setDefaultHellenAtPullUps();
@ -127,19 +127,19 @@ void setBoardDefaultConfiguration() {
int16_t hellenBoardId = engine->engineState.hellenBoardId;
if (isMegaModuleRevision()) {
setHellenMMbaro();
engineConfiguration->map.sensor.hwChannel = Gpio::H144_IN_MAP3; // On-board MAP
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP3; // On-board MAP
engineConfiguration->map.sensor.type = MT_MPXH6400;
} else {
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP2; // B2 external signal
engineConfiguration->baroSensor.type = MT_MPXH6400;
engineConfiguration->baroSensor.hwChannel = Gpio::H144_IN_MAP3; // On-board MAP
engineConfiguration->baroSensor.hwChannel = H144_IN_MAP3; // On-board MAP
}
engineConfiguration->boardUseTempPullUp = true;
engineConfiguration->acSwitch = Gpio::Unassigned;
engineConfiguration->fuelPumpPin = H144_OUT_PWM2;
engineConfiguration->fanPin = H144_OUT_PWM4;
engineConfiguration->fuelPumpPin = Gpio::H144_OUT_PWM2;
engineConfiguration->fanPin = Gpio::H144_OUT_PWM4;
engineConfiguration->mainRelayPin = Gpio::Unassigned;
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM3;
@ -152,7 +152,7 @@ void setBoardDefaultConfiguration() {
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ? engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
engineConfiguration->vrThreshold[0].pin = H144_OUT_PWM6;
engineConfiguration->vrThreshold[0].pin = Gpio::H144_OUT_PWM6;
}
void boardPrepareForStop() {

12
firmware/config/boards/hellen/alphax-2chan/connectors/main.yaml
View File

@ -15,8 +15,7 @@ pins:
color: red
- pin: A3
# H144_OUT_PWM2
id: C6
meta: H144_OUT_PWM2
class: outputs
function: Fuel Pump Relay Output (low)
type: ls
@ -24,8 +23,7 @@ pins:
color: purple
- pin: A4
# H144_OUT_PWM3
id: C7
meta: H144_OUT_PWM3
class: outputs
function: Tachometer Output
ts_name: A4 - Tachometer
@ -127,8 +125,7 @@ pins:
color: blue
- pin: C1
# H144_OUT_PWM4
id: C8
meta: H144_OUT_PWM4
class: outputs
function: Fan Relay or 5A Power Output (low)
type: ls
@ -191,8 +188,7 @@ pins:
color: brown
- pin: C8
# H144_OUT_PWM1
id: D13
meta: H144_OUT_PWM1
class: outputs
function: Idle Output (low)
type: ls

40
firmware/config/boards/hellen/alphax-4chan/board_configuration.cpp
View File

@ -44,7 +44,7 @@ static void setupEtb() {
// DIS - disables motor (enable low)
// PWM pin
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
// DIR pin
engineConfiguration->etbIo[0].directionPin1 = H144_GP1;
// Disable pin
@ -105,24 +105,24 @@ static bool is_F_OrOlder() {
}
void boardInitHardware() {
alphaTachPullUp.initPin("a-tach", H144_OUT_IO1);
alphaTempPullUp.initPin("a-temp", H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", H144_OUT_IO2);
alphaCrankNPullUp.initPin("a-crank-n", H144_OUT_IO5);
alpha2stepPullDown.initPin("a-2step", H144_OUT_IO7);
alphaCamVrPullUp.initPin("a-cam-vr", H144_OUT_IO9);
alphaTachPullUp.initPin("a-tach", Gpio::H144_OUT_IO1);
alphaTempPullUp.initPin("a-temp", Gpio::H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", Gpio::H144_OUT_IO2);
alphaCrankNPullUp.initPin("a-crank-n", Gpio::H144_OUT_IO5);
alpha2stepPullDown.initPin("a-2step", Gpio::H144_OUT_IO7);
alphaCamVrPullUp.initPin("a-cam-vr", Gpio::H144_OUT_IO9);
if (is_F_OrOlder()) {
alphaD2PullDown.initPin("a-d2", H144_LS_5);
alphaCamPullDown.initPin("a-cam", H144_OUT_IO8);
alphaD3PullDown.initPin("a-d3", H144_LS_6);
alphaD2PullDown.initPin("a-d2", Gpio::H144_LS_5);
alphaCamPullDown.initPin("a-cam", Gpio::H144_OUT_IO8);
alphaD3PullDown.initPin("a-d3", Gpio::H144_LS_6);
} else {
alphaD2PullDown.initPin("a-d2", Gpio::H144_OUT_IO13;);
alphaD2PullDown.initPin("a-d2", Gpio::H144_OUT_IO13);
alphaCamPullDown.initPin("a-cam", H144_GP4);
alphaD3PullDown.initPin("a-d3", H144_OUT_IO8);
alphaD3PullDown.initPin("a-d3", Gpio::H144_OUT_IO8);
}
alphaD4PullDown.initPin("a-d4", Gpio::H144_LS_7);
alphaD5PullDown.initPin("a-d5", H144_LS_8);
alphaD5PullDown.initPin("a-d5", Gpio::H144_LS_8);
boardOnConfigurationChange(nullptr);
}
@ -147,7 +147,7 @@ void setBoardConfigOverrides() {
setupVbatt();
if (is_F_OrOlder()) {
setHellenEnPin(H144_OUT_IO3);
setHellenEnPin(Gpio::H144_OUT_IO3);
setHellenSdCardSpi2();
} else {
setHellenMegaEnPin();
@ -174,8 +174,8 @@ void setBoardDefaultConfiguration() {
setupEtb();
if (is_F_OrOlder()) {
engineConfiguration->tachOutputPin = Gpio::H144_OUT_IO13;;
engineConfiguration->vvtPins[0] = H144_OUT_PWM7;
engineConfiguration->vvtPins[1] = H144_OUT_PWM8;
engineConfiguration->vvtPins[0] = Gpio::H144_OUT_PWM7;
engineConfiguration->vvtPins[1] = Gpio::H144_OUT_PWM8;
} else {
engineConfiguration->vvtPins[0] = Gpio::H144_IGN_7;
engineConfiguration->vvtPins[1] = Gpio::H144_IGN_8;
@ -185,10 +185,10 @@ void setBoardDefaultConfiguration() {
// todo: should be conditional? currently set best for newest boards based on MegaModule
setHellenMMbaro();
engineConfiguration->map.sensor.hwChannel = Gpio::H144_IN_MAP3; // On-board MAP
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP3; // On-board MAP
engineConfiguration->map.sensor.type = MT_MPXH6400;
// engineConfiguration->baroSensor.type = MT_MPXH6400;
// engineConfiguration->baroSensor.hwChannel = Gpio::H144_IN_MAP3; // On-board MAP
// engineConfiguration->baroSensor.hwChannel = H144_IN_MAP3; // On-board MAP
engineConfiguration->boardUseTempPullUp = true;
@ -210,8 +210,8 @@ void setBoardDefaultConfiguration() {
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ? engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
engineConfiguration->vrThreshold[0].pin = H144_OUT_PWM6;
engineConfiguration->vrThreshold[1].pin = H144_OUT_PWM4;
engineConfiguration->vrThreshold[0].pin = Gpio::H144_OUT_PWM6;
engineConfiguration->vrThreshold[1].pin = Gpio::H144_OUT_PWM4;
}
void boardPrepareForStop() {

28
firmware/config/boards/hellen/alphax-8chan/board_configuration.cpp
View File

@ -43,7 +43,7 @@ static void setupEtb() {
// DIS - disables motor (enable low)
// PWM pin
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
// DIR pin
engineConfiguration->etbIo[0].directionPin1 = H144_GP1;
// Disable pin
@ -100,7 +100,7 @@ static void setupDefaultSensorInputs() {
engineConfiguration->mafAdcChannel = EFI_ADC_NONE;
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP2;
engineConfiguration->baroSensor.type = MT_MPXH6400;
// engineConfiguration->baroSensor.hwChannel = Gpio::H144_IN_MAP3;
// engineConfiguration->baroSensor.hwChannel = H144_IN_MAP3;
engineConfiguration->afr.hwChannel = EFI_ADC_NONE;
@ -110,18 +110,18 @@ static void setupDefaultSensorInputs() {
}
void boardInitHardware() {
setHellenEnPin(H144_OUT_IO3);
setHellenEnPin(Gpio::H144_OUT_IO3);
alphaTempPullUp.initPin("a-temp", H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", H144_OUT_IO5);
alphaTachPullUp.initPin("a-tach", H144_OUT_IO6);
alpha2stepPullDown.initPin("a-2step", H144_OUT_IO7);
alphaCamPullDown.initPin("a-cam", H144_OUT_IO8);
//alphaCamVrPullUp.initPin("a-cam-vr", H144_OUT_IO9);
alphaTempPullUp.initPin("a-temp", Gpio::H144_OUT_IO4);
alphaCrankPPullUp.initPin("a-crank-p", Gpio::H144_OUT_IO5);
alphaTachPullUp.initPin("a-tach", Gpio::H144_OUT_IO6);
alpha2stepPullDown.initPin("a-2step", Gpio::H144_OUT_IO7);
alphaCamPullDown.initPin("a-cam", Gpio::H144_OUT_IO8);
//alphaCamVrPullUp.initPin("a-cam-vr", Gpio::H144_OUT_IO9);
alphaD2PullDown.initPin("a-d2", H_SPI3_SCK);
alphaD3PullDown.initPin("a-d3", H_SPI3_MISO);
alphaD4PullDown.initPin("a-d4", H_SPI3_MOSI);
//alphaD5PullDown.initPin("a-d5", H144_LS_8);
//alphaD5PullDown.initPin("a-d5", Gpio::H144_LS_8);
boardOnConfigurationChange(nullptr);
}
@ -162,8 +162,8 @@ void setBoardDefaultConfiguration() {
setInjectorPins();
setIgnitionPins();
setupEtb();
engineConfiguration->vvtPins[0] = H144_OUT_PWM7;
engineConfiguration->vvtPins[1] = H144_OUT_PWM8;
engineConfiguration->vvtPins[0] = Gpio::H144_OUT_PWM7;
engineConfiguration->vvtPins[1] = Gpio::H144_OUT_PWM8;
engineConfiguration->boardUseTempPullUp = true;
@ -183,8 +183,8 @@ void setBoardDefaultConfiguration() {
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ? engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
engineConfiguration->vrThreshold[0].pin = H144_OUT_PWM6;
engineConfiguration->vrThreshold[1].pin = H144_OUT_PWM4;
engineConfiguration->vrThreshold[0].pin = Gpio::H144_OUT_PWM6;
engineConfiguration->vrThreshold[1].pin = Gpio::H144_OUT_PWM4;
hellenWbo();
}

14
firmware/config/boards/hellen/harley81/board_configuration.cpp
View File

@ -39,11 +39,11 @@ static void setupEtb() {
// DIS - disables motor (enable low)
// PWM pin
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
// DIR pin
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM1;
// Disable pin
engineConfiguration->etbIo[0].disablePin = H144_OUT_IO1;
engineConfiguration->etbIo[0].disablePin = Gpio::H144_OUT_IO1;
// Unused
engineConfiguration->etbIo[0].directionPin2 = Gpio::Unassigned;
@ -80,7 +80,7 @@ static void setupDefaultSensorInputs() {
engineConfiguration->mafAdcChannel = H144_IN_MAP1;
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP2;
engineConfiguration->baroSensor.type = MT_MPXH6400;
engineConfiguration->baroSensor.hwChannel = Gpio::H144_IN_MAP3;
engineConfiguration->baroSensor.hwChannel = H144_IN_MAP3;
engineConfiguration->afr.hwChannel = EFI_ADC_NONE;
@ -90,7 +90,7 @@ static void setupDefaultSensorInputs() {
}
void boardInitHardware() {
setHellenEnPin(H144_OUT_IO3);
setHellenEnPin(Gpio::H144_OUT_IO3);
boardOnConfigurationChange(nullptr);
}
@ -123,8 +123,8 @@ void setBoardDefaultConfiguration() {
setIgnitionPins();
setupEtb();
engineConfiguration->acSwitch = Gpio::Unassigned;
// engineConfiguration->fuelPumpPin = Gpio::Unassigned;//H144_OUT_PWM2;
// engineConfiguration->fanPin = Gpio::Unassigned;//H144_OUT_PWM4;
// engineConfiguration->fuelPumpPin = Gpio::Unassigned;//Gpio::H144_OUT_PWM2;
// engineConfiguration->fanPin = Gpio::Unassigned;//Gpio::H144_OUT_PWM4;
engineConfiguration->mainRelayPin = Gpio::Unassigned;
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM3;
@ -150,7 +150,7 @@ void setBoardDefaultConfiguration() {
engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
// ? engineConfiguration->malfunctionIndicatorPin = Gpio::G4; //1E - Check Engine Light
engineConfiguration->vrThreshold[0].pin = H144_OUT_PWM4;
engineConfiguration->vrThreshold[0].pin = Gpio::H144_OUT_PWM4;
}
void boardPrepareForStop() {

14
firmware/config/boards/hellen/hellen-gm-e67/board_configuration.cpp
View File

@ -26,7 +26,7 @@ static void setInjectorPins() {
engineConfiguration->clutchDownPin = Gpio::C4; // Clutch switch input
engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
engineConfiguration->malfunctionIndicatorPin = H144_OUT_IO8;
engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO8;
}
static void setIgnitionPins() {
@ -92,11 +92,11 @@ void setBoardConfigOverrides() {
//ETB1
// PWM pin
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM8;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM8;
// DIR pin
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_IO13;;
// Disable pin
engineConfiguration->etbIo[0].disablePin = H144_OUT_IO4;
engineConfiguration->etbIo[0].disablePin = Gpio::H144_OUT_IO4;
// Unused
engineConfiguration->etbIo[0].directionPin2 = Gpio::Unassigned;
@ -120,14 +120,14 @@ void setBoardDefaultConfiguration() {
engineConfiguration->luaOutputPins[0] = Gpio::H144_OUT_IO6; // starter relay
engineConfiguration->boostControlPin = H144_OUT_PWM5;
engineConfiguration->boostControlPin = Gpio::H144_OUT_PWM5;
engineConfiguration->brakePedalPin = H144_IN_RES2;
// engineConfiguration->acSwitch =
// engineConfiguration->acRelayPin =
engineConfiguration->fuelPumpPin = H144_OUT_IO5;
engineConfiguration->fuelPumpPin = Gpio::H144_OUT_IO5;
engineConfiguration->fanPin = Gpio::H144_OUT_IO12;
engineConfiguration->mainRelayPin = H144_OUT_IO3;
engineConfiguration->tachOutputPin = H144_OUT_PWM7;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3;
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM7;
engineConfiguration->alternatorControlPin = Gpio::H144_OUT_PWM1;
// engineConfiguration->fan2Pin =

16
firmware/config/boards/hellen/hellen-honda-k/board_configuration.cpp
View File

@ -80,7 +80,7 @@ void setBoardConfigOverrides() {
// //ETB1
// // PWM pin
// engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2;
// engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
// // DIR pin
// engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM3;
// // Disable pin
@ -114,7 +114,7 @@ void setBoardDefaultConfiguration() {
engineConfiguration->canTxPin = H176_CAN_TX;
engineConfiguration->canRxPin = H176_CAN_RX;
engineConfiguration->vvtPins[0] = H144_OUT_PWM4;
engineConfiguration->vvtPins[0] = Gpio::H144_OUT_PWM4;
gppwm_channel *vtsControl = &engineConfiguration->gppwm[0];
// vtsControl->pin = Gpio::H144_OUT_IO6;
@ -122,8 +122,8 @@ void setBoardDefaultConfiguration() {
engineConfiguration->fuelPumpPin = Gpio::H144_OUT_IO13;;
engineConfiguration->idle.solenoidPin = Gpio::H144_LS_6;
engineConfiguration->fanPin = Gpio::H144_OUT_IO12;
engineConfiguration->mainRelayPin = H144_OUT_IO3;
engineConfiguration->malfunctionIndicatorPin = H144_OUT_IO7;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3;
engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO7;
// how come this is not denso 183?!
engineConfiguration->map.sensor.type = MT_CUSTOM;
@ -164,10 +164,10 @@ void setBoardDefaultConfiguration() {
}
static Gpio OUTPUTS[] = {
H144_LS_1,
H144_LS_2,
H144_LS_3,
H144_LS_4,
Gpio::H144_LS_1,
Gpio::H144_LS_2,
Gpio::H144_LS_3,
Gpio::H144_LS_4,
};
int getBoardMetaOutputsCount() {

68
firmware/config/boards/hellen/hellen-honda-k/connectors/main.yaml
View File

@ -1,3 +1,5 @@
meta: config/boards/hellen_meta.h
pins:
- pin: auxhigh1
# H144_OUT_IO5
@ -7,8 +9,7 @@ pins:
function: AuxHigh1
- pin: auxpp1
# H144_OUT_IO11
id: G2
meta: H144_OUT_IO11
class: outputs
ts_name: AuxPP1
function: AuxPP1
@ -49,8 +50,7 @@ pins:
type: gnda
- pin: A12
# H144_LS_6
id: F12
meta: H144_LS_6
class: outputs
ts_name: A12 Idle Air Control
function: Idle Air Control Valve
@ -124,28 +124,24 @@ pins:
function: Cam Sensor
- pin: A27
# H144_IGN_4
id: E3
meta: H144_IGN_4
class: outputs
ts_name: A27 - IGN4
function: Ignition 4
- pin: A28
# H144_IGN_3
id: E4
meta: H144_IGN_3
class: outputs
ts_name: A28 - IGN3
function: Ignition 3
- pin: A29
# H144_IGN_2
id: E5
meta: H144_IGN_2
class: outputs
ts_name: A29 - IGN2
function: Ignition 2
- pin: A30
# H144_IGN_1
id: C13
meta: H144_IGN_1
class: outputs
ts_name: A30 - IGN1
function: Ignition 1
@ -154,45 +150,39 @@ pins:
function: VTC +12 supply
- pin: B2
# H144_LS_4
id: D10
meta: H144_LS_4
class: outputs
type: inj
ts_name: B2 - Injector 4
function: Injector 4
- pin: B3
# H144_LS_3
id: D11
meta: H144_LS_3
class: outputs
type: inj
ts_name: B3 - Injector 3
function: Injector 3
- pin: B4
# H144_LS_2
id: G8
meta: H144_LS_2
class: outputs
type: inj
ts_name: B4 - Injector 2
function: Injector 2
- pin: B5
# H144_LS_1
id: G7
meta: H144_LS_1
class: outputs
ts_name: B5 - Injector 1
function: Injector 1
- pin: B6
# H144_OUT_IO12
id: A8
meta: H144_OUT_IO12
class: outputs
type: ls
ts_name: B6 Radiator Relay
function: Radiator Relay Output
- pin: B7
# H144_LS_8
id: F14
meta: H144_LS_8
class: outputs
ts_name: ___ Lockout Solenoid
function: Lockout Solenoid
@ -215,8 +205,7 @@ pins:
function: Alternator Field
- pin: B15
# H144_OUT_IO6
id: G11
meta: H144_OUT_IO6
class: outputs
ts_name: ___ VTEC/VTS Output
# not to be confused with VTC aka VVT
@ -229,29 +218,25 @@ pins:
ts_name: ___ IAT
function: IAT
- pin: B18
# H144_OUT_IO9
id: G13
meta: H144_OUT_IO9
class: outputs
ts_name: ___ Alternator Control
function: Alternator Control
- pin: B21
# H144_OUT_PWM5
id: C9
meta: H144_OUT_PWM5
class: outputs
ts_name: ___ - EVAP
function: EVAP
- pin: B22
# H144_LS_7
id: F13
meta: H144_LS_7
class: outputs
ts_name: ___ Intake Runner
function: Intake Runner
- pin: B23
# H144_OUT_PWM4
id: C8
meta: H144_OUT_PWM4
class: outputs
ts_name: ___ VTC VVT
function: VTC VVT
@ -295,21 +280,18 @@ pins:
- pin: C11
# H144_OUT_PWM7
id: D15
meta: H144_OUT_PWM7
class: outputs
ts_name: ___ Aux Low 3
function: Aux Low 3
- pin: C12
# H144_OUT_PWM6
id: D14
meta: H144_OUT_PWM6
class: outputs
function: Aux Low 2
- pin: C13
# H144_OUT_PWM2
id: C6
meta: H144_OUT_PWM2
class: outputs
function: Aux Low 1
@ -354,8 +336,7 @@ pins:
color: orange
- pin: E1
# H144_OUT_IO13
id: G6
meta: H144_OUT_IO13
class: outputs
ts_name: E1 Fuel Relay
function: Fuel Relay
@ -373,8 +354,7 @@ pins:
function: 5V Sensor Power
- pin: E7
# H144_OUT_IO3
id: G14
meta: H144_OUT_IO3
class: outputs
ts_name: E7 Main Relay Control
function: Main Relay Control

6
firmware/config/boards/hellen/hellen-nb1/board_configuration.cpp
View File

@ -22,7 +22,7 @@ static void setInjectorPins() {
engineConfiguration->clutchDownPin = Gpio::C4; // Clutch switch input
engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
engineConfiguration->malfunctionIndicatorPin = H144_OUT_IO8;
engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO8;
}
static void setIgnitionPins() {
@ -97,8 +97,8 @@ void setBoardDefaultConfiguration() {
engineConfiguration->fanPin = Gpio::D12; // OUT_PWM8
engineConfiguration->mainRelayPin = Gpio::I2; // OUT_LOW3
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM1;
engineConfiguration->alternatorControlPin = H144_OUT_PWM7;
engineConfiguration->fan2Pin = H144_OUT_IO2;
engineConfiguration->alternatorControlPin = Gpio::H144_OUT_PWM7;
engineConfiguration->fan2Pin = Gpio::H144_OUT_IO2;
// "required" hardware is done - set some reasonable defaults
setupDefaultSensorInputs();

5
firmware/config/boards/hellen/hellen-nb1/connectors/main.yaml
View File

@ -1,7 +1,4 @@
#
# CONNECTOR MAPPING NEEDED
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
#
meta: config/boards/hellen_meta.h
pins:
- pin: 1A

10
firmware/config/boards/hellen/hellen121nissan/board_configuration.cpp
View File

@ -74,8 +74,8 @@ void setBoardConfigOverrides() {
setupVbatt();
setHellenSdCardSpi3();
engineConfiguration->etbIo[0].directionPin1 = H144_OUT_PWM7;
engineConfiguration->etbIo[0].directionPin2 = H144_OUT_PWM6;
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM7;
engineConfiguration->etbIo[0].directionPin2 = Gpio::H144_OUT_PWM6;
engineConfiguration->etbIo[0].controlPin = Gpio::D13; // ETB_EN out_pwm1
engineConfiguration->etb_use_two_wires = true;
@ -103,7 +103,7 @@ void setBoardDefaultConfiguration() {
engineConfiguration->fuelPumpPin = Gpio::D12; // OUT_IO9 // 113 Fuel Pump Relay
engineConfiguration->idle.solenoidPin = Gpio::Unassigned;
// engineConfiguration->fanPin = Gpio::D12; // OUT_PWM8
engineConfiguration->mainRelayPin = H144_OUT_IO3;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3;
// "required" hardware is done - set some reasonable defaults
setupDefaultSensorInputs();
@ -133,8 +133,8 @@ void setBoardDefaultConfiguration() {
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
engineConfiguration->injectionMode = IM_SEQUENTIAL;
engineConfiguration->luaOutputPins[0] = H144_OUT_IO4; // 104 ETB Relay
engineConfiguration->luaOutputPins[1] = H144_OUT_PWM2; // aux LS1, upstream oxygen heaters
engineConfiguration->luaOutputPins[0] = Gpio::H144_OUT_IO4; // 104 ETB Relay
engineConfiguration->luaOutputPins[1] = Gpio::H144_OUT_PWM2; // aux LS1, upstream oxygen heaters
setPPSCalibration(0.75, 4.45, 0.43, 2.20);

12
firmware/config/boards/hellen/hellen121vag/board_configuration.cpp
View File

@ -108,15 +108,15 @@ void setBoardDefaultConfiguration() {
engineConfiguration->enableSoftwareKnock = true;
engineConfiguration->fuelPumpPin = H144_OUT_IO3;
engineConfiguration->fuelPumpPin = Gpio::H144_OUT_IO3;
engineConfiguration->malfunctionIndicatorPin = Gpio::G4; // 47 - CEL
engineConfiguration->tachOutputPin = H144_OUT_PWM7;
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM7;
// earlier revisions? engineConfiguration->idle.solenoidPin = Gpio::D14; // OUT_PWM5
engineConfiguration->idle.solenoidPin = H144_OUT_IO4;
engineConfiguration->idle.solenoidPin = Gpio::H144_OUT_IO4;
engineConfiguration->fanPin = H144_OUT_PWM8;
engineConfiguration->mainRelayPin = H144_OUT_IO1;
engineConfiguration->fanPin = Gpio::H144_OUT_PWM8;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO1;
// engineConfiguration->injectorCompensationMode
engineConfiguration->fuelReferencePressure = 300;
@ -132,6 +132,6 @@ void setBoardDefaultConfiguration() {
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
engineConfiguration->vrThreshold[0].pin = H144_OUT_PWM6;
engineConfiguration->vrThreshold[0].pin = Gpio::H144_OUT_PWM6;
hellenWbo();
}

28
firmware/config/boards/hellen/hellen154hyundai/board_configuration.cpp
View File

@ -85,7 +85,7 @@ void setBoardConfigOverrides() {
// control pins are inverted since overall ECU pinout seems to be inverted
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM3;
engineConfiguration->etbIo[0].directionPin2 = H144_OUT_PWM2;
engineConfiguration->etbIo[0].directionPin2 = Gpio::H144_OUT_PWM2;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_IO12;
engineConfiguration->etbIo[0].disablePin = Gpio::Unassigned;
engineConfiguration->etb_use_two_wires = true;
@ -99,9 +99,9 @@ void setBoardConfigOverrides() {
if (isFirstInvocation) {
isFirstInvocation = false;
efiSetPadMode("ETB FIX0", H144_OUT_PWM4, PAL_MODE_INPUT_ANALOG);
efiSetPadMode("ETB FIX1", H144_OUT_PWM5, PAL_MODE_INPUT_ANALOG);
efiSetPadMode("ETB FIX2", Gpio::H144_OUT_IO13;, PAL_MODE_INPUT_ANALOG);
efiSetPadMode("ETB FIX0", Gpio::H144_OUT_PWM4, PAL_MODE_INPUT_ANALOG);
efiSetPadMode("ETB FIX1", Gpio::H144_OUT_PWM5, PAL_MODE_INPUT_ANALOG);
efiSetPadMode("ETB FIX2", Gpio::H144_OUT_IO13, PAL_MODE_INPUT_ANALOG);
}
engineConfiguration->stepperDcInvertedPins = false;
} else if (hellenBoardId == BOARD_ID_154hyundai_c || hellenBoardId == BOARD_ID_154hyundai_d) {
@ -114,7 +114,7 @@ void setBoardConfigOverrides() {
//ETB1
// PWM pin
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2;
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
// DIR pin
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM3;
// Disable pin
@ -125,9 +125,9 @@ void setBoardConfigOverrides() {
// wastegate DC motor
//ETB2
// PWM pin
engineConfiguration->etbIo[1].controlPin = H144_OUT_PWM4;
engineConfiguration->etbIo[1].controlPin = Gpio::H144_OUT_PWM4;
// DIR pin
engineConfiguration->etbIo[1].directionPin1 = H144_OUT_PWM5;
engineConfiguration->etbIo[1].directionPin1 = Gpio::H144_OUT_PWM5;
// Disable pin
engineConfiguration->etbIo[1].disablePin = Gpio::H144_OUT_IO13;;
// Unused
@ -149,10 +149,10 @@ void setBoardDefaultConfiguration() {
engineConfiguration->canTxPin = H176_CAN_TX;
engineConfiguration->canRxPin = H176_CAN_RX;
engineConfiguration->fuelPumpPin = H144_OUT_IO9;
engineConfiguration->fuelPumpPin = Gpio::H144_OUT_IO9;
// engineConfiguration->fanPin = Gpio::D12; // OUT_PWM8
engineConfiguration->mainRelayPin = H144_OUT_IO3; // pin: 111a
engineConfiguration->malfunctionIndicatorPin = H144_OUT_PWM8;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3; // pin: 111a
engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_PWM8;
engineConfiguration->brakePedalPin = H144_IN_RES3;
engineConfiguration->clutchUpPin = H144_IN_RES2;
@ -165,10 +165,10 @@ void setBoardDefaultConfiguration() {
}
static Gpio OUTPUTS[] = {
H144_LS_1,
H144_LS_2,
H144_LS_3,
H144_LS_4,
Gpio::H144_LS_1,
Gpio::H144_LS_2,
Gpio::H144_LS_3,
Gpio::H144_LS_4,
};
int getBoardMetaOutputsCount() {

57
firmware/config/boards/hellen/hellen154hyundai/connectors/main.yaml
View File

@ -1,21 +1,18 @@
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
meta: config/boards/hellen_meta.h
pins:
- pin: P66
# LOW3 IO1
id: D3
meta: H144_OUT_IO1
class: outputs
ts_name: Aux P66
- pin: P67
# LOW4 IO2
id: A9
meta: H144_OUT_IO2
class: outputs
ts_name: Aux P67
- pin: P68
# LOW6 IO4
id: G5
meta: H144_OUT_IO4
class: outputs
ts_name: Aux P68
@ -100,28 +97,28 @@ pins:
ts_name: BK2 Wastegate Position - 22
- pin: K25
id: G7
meta: H144_LS_1
class: outputs
ts_name: INJ_1 k25
function: Injector 1
type: inj
- pin: K26
id: G8
meta: H144_LS_2
class: outputs
ts_name: INJ_2 k26
function: Injector 2
type: inj
- pin: K27
id: D11
meta: H144_LS_3
class: outputs
ts_name: INJ_3 k27
function: Injector 3
type: inj
- pin: K28
id: D10
meta: H144_LS_4
class: outputs
ts_name: INJ_4 k28
function: Injector 4
@ -187,8 +184,7 @@ pins:
function: Analog Ground
- pin: K47
# H144_LS_7
id: F13
meta: H144_LS_7
class: outputs
ts_name: K47 BK1 Wastegate Solenoid
function: BK1 Wastegate Solenoid
@ -246,38 +242,33 @@ pins:
type: 5v
- pin: K64
# H144_OUT_IO3
id: G14
meta: H144_OUT_IO3
class: outputs
ts_name: Main Relay K64
function: Main relay control
type: ls
- pin: K65
# H144_OUT_IO7
id: G3
meta: H144_OUT_IO7
class: outputs
ts_name: Fan Relay Low
function: Fan relay low
- pin: K66
# H144_LS_5
id: D9
meta: H144_LS_5
class: outputs
ts_name: VVT1
function: VVT1
- pin: K68
# H144_LS_6
id: F12
meta: H144_LS_6
class: outputs
ts_name: VVT2
function: VVT2
- pin: K70
# H144_OUT_IO9
id: G13
meta: H144_OUT_IO9
class: outputs
ts_name: Fuel Pump K70
function: Fuel Pump Relay
@ -319,36 +310,32 @@ pins:
function: Analog Ground
- pin: K86
# H144_OUT_PWM7
id: D15
meta: H144_OUT_PWM7
class: outputs
ts_name: Tacho
function: Tachometer
- pin: K87
# H144_OUT_IO10
id: G12
meta: H144_OUT_IO10
class: outputs
ts_name: K87 AC Relay
function: A/C Relay
type: ls
- pin: K88
# H144_OUT_IO8
id: G4
meta: H144_OUT_IO8
class: outputs
ts_name: Fan Relay HI
function: Fan relay high
- pin: K92
# H144_OUT_PWM8
id: D12
meta: H144_OUT_PWM8
class: outputs
ts_name: MIL
function: Check Engine Light
- pin: A1
id: E3
meta: H144_IGN_4
class: outputs
ts_name: Coil 4
function: Coil 4
@ -361,7 +348,7 @@ pins:
function: Ground
- pin: A16
id: E5
meta: H144_IGN_2
class: outputs
ts_name: Coil 2
function: Coil 2
@ -376,7 +363,7 @@ pins:
- pin: A31
id: C13
meta: H144_IGN_1
class: outputs
ts_name: Coil 1
function: Coil 1
@ -393,7 +380,7 @@ pins:
function: BK2 DC Wastegate Pos
- pin: A46
id: E4
meta: H144_IGN_3
class: outputs
ts_name: Coil 3
function: Coil 3

4
firmware/config/boards/hellen/hellen72/board_configuration.cpp
View File

@ -75,8 +75,8 @@ void setBoardConfigOverrides() {
// NB2 still uses L6205PD
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM3; // ETB+
engineConfiguration->etbIo[0].directionPin2 = H144_OUT_PWM4; // ETB-
engineConfiguration->etbIo[0].controlPin = H144_OUT_PWM2; // ETB_EN
engineConfiguration->etbIo[0].directionPin2 = Gpio::H144_OUT_PWM4; // ETB-
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2; // ETB_EN
engineConfiguration->etb_use_two_wires = true;
setDefaultHellenAtPullUps();

8
firmware/config/boards/hellen/hellen88bmw/board_configuration.cpp
View File

@ -71,7 +71,7 @@ void setBoardConfigOverrides() {
setupVbatt();
// hellen88bmw uses L6205PD
engineConfiguration->etbIo[0].directionPin1 = H144_OUT_PWM2; // ETB+
engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM2; // ETB+
engineConfiguration->etbIo[0].directionPin2 = Gpio::H144_OUT_PWM3; // ETB-
engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM1; // ETB_EN
engineConfiguration->etb_use_two_wires = true;
@ -101,10 +101,10 @@ void setBoardDefaultConfiguration() {
setHellenCan();
engineConfiguration->fuelPumpPin = Gpio::D12; // OUT_IO9 // 113 Fuel Pump Relay
engineConfiguration->idle.solenoidPin = H144_OUT_PWM5;
engineConfiguration->idle.solenoidPin = Gpio::H144_OUT_PWM5;
// engineConfiguration->fanPin = Gpio::D12; // OUT_PWM8
engineConfiguration->mainRelayPin = H144_OUT_IO3; // pin: 111a
engineConfiguration->tachOutputPin = H144_OUT_PWM7;
engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3; // pin: 111a
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM7;
// "required" hardware is done - set some reasonable defaults
setupDefaultSensorInputs();

2
firmware/config/boards/hellen/hellen88bmw/connectors/main.yaml
View File

@ -1,4 +1,4 @@
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
meta: config/boards/hellen_meta.h
pins:
# extension header pins

6
firmware/config/boards/hellen/hellenNA8_96/board_configuration.cpp
View File

@ -22,7 +22,7 @@ static void setInjectorPins() {
engineConfiguration->clutchDownPin = Gpio::C4; // Clutch switch input
engineConfiguration->clutchDownPinMode = PI_PULLDOWN;
engineConfiguration->launchActivationMode = CLUTCH_INPUT_LAUNCH;
engineConfiguration->malfunctionIndicatorPin = H144_OUT_IO8;
engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO8;
}
static void setIgnitionPins() {
@ -55,7 +55,7 @@ static void setupDefaultSensorInputs() {
engineConfiguration->tps1_1AdcChannel = H144_IN_TPS;
engineConfiguration->mafAdcChannel = EFI_ADC_10;
engineConfiguration->map.sensor.hwChannel = Gpio::H144_IN_MAP3;
engineConfiguration->map.sensor.hwChannel = H144_IN_MAP3;
engineConfiguration->afr.hwChannel = EFI_ADC_1;
@ -101,7 +101,7 @@ void setBoardDefaultConfiguration() {
engineConfiguration->idle.solenoidPin = Gpio::D14; // OUT_PWM5
engineConfiguration->fanPin = Gpio::D12; // OUT_PWM8
engineConfiguration->tachOutputPin = Gpio::H144_OUT_PWM1;
engineConfiguration->fan2Pin = H144_OUT_IO2;
engineConfiguration->fan2Pin = Gpio::H144_OUT_IO2;
// "required" hardware is done - set some reasonable defaults
setupDefaultSensorInputs();

5
firmware/config/boards/hellen/hellenNA8_96/connectors/main.yaml
View File

@ -1,7 +1,4 @@
#
# CONNECTOR MAPPING NEEDED
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
#
meta: config/boards/hellen_meta.h
pins:
- pin: p18_p22

2
firmware/config/boards/hellen/small-can-board/connectors/small.yaml
View File

@ -1,4 +1,4 @@
# https://github.com/rusefi/rusefi/blob/master/firmware/config/boards/hellen/hellen_meta.h
meta: config/boards/hellen_meta.h
pins:
- pin: A1

28
firmware/config/boards/hellen_meta.h
View File

@ -95,13 +95,13 @@ void detectHellenBoardType();
#define H176_IGN_5 Gpio::E2
#define H144_OUT_PWM1 D13
#define H144_OUT_PWM2 Gpio::C6
#define H144_OUT_PWM2 C6
#define H144_OUT_PWM3 C7
#define H144_OUT_PWM4 Gpio::C8
#define H144_OUT_PWM5 Gpio::C9
#define H144_OUT_PWM6 Gpio::D14
#define H144_OUT_PWM7 Gpio::D15
#define H144_OUT_PWM8 Gpio::D12
#define H144_OUT_PWM4 C8
#define H144_OUT_PWM5 C9
#define H144_OUT_PWM6 D14
#define H144_OUT_PWM7 D15
#define H144_OUT_PWM8 D12
// also IO1/IO5 on rev 0.6
@ -116,15 +116,15 @@ void detectHellenBoardType();
#define H144_GP8 Gpio::E10
#define H144_GP9 Gpio::F2
#define H144_OUT_IO1 Gpio::D3
#define H144_OUT_IO2 Gpio::A9
#define H144_OUT_IO3 Gpio::G14
#define H144_OUT_IO4 Gpio::G5
#define H144_OUT_IO5 Gpio::D2
#define H144_OUT_IO1 D3
#define H144_OUT_IO2 A9
#define H144_OUT_IO3 G14
#define H144_OUT_IO4 G5
#define H144_OUT_IO5 D2
#define H144_OUT_IO6 G11
#define H144_OUT_IO7 Gpio::G3
#define H144_OUT_IO8 Gpio::G4
#define H144_OUT_IO9 Gpio::G13
#define H144_OUT_IO7 G3
#define H144_OUT_IO8 G4
#define H144_OUT_IO9 G13
#define H144_OUT_IO10 G12
#define H144_OUT_IO11 G2
#define H144_OUT_IO12 A8

40
firmware/config/boards/proteus/board_configuration.cpp
View File

@ -10,23 +10,23 @@
#include "proteus_meta.h"
static const brain_pin_e injPins[] = {
PROTEUS_LS_1,
PROTEUS_LS_2,
PROTEUS_LS_3,
PROTEUS_LS_4,
PROTEUS_LS_5,
PROTEUS_LS_6,
PROTEUS_LS_7,
PROTEUS_LS_8,
PROTEUS_LS_9,
PROTEUS_LS_10,
PROTEUS_LS_11,
PROTEUS_LS_12
Gpio::PROTEUS_LS_1,
Gpio::PROTEUS_LS_2,
Gpio::PROTEUS_LS_3,
Gpio::PROTEUS_LS_4,
Gpio::PROTEUS_LS_5,
Gpio::PROTEUS_LS_6,
Gpio::PROTEUS_LS_7,
Gpio::PROTEUS_LS_8,
Gpio::PROTEUS_LS_9,
Gpio::PROTEUS_LS_10,
Gpio::PROTEUS_LS_11,
Gpio::PROTEUS_LS_12
};
static const brain_pin_e ignPins[] = {
PROTEUS_IGN_1,
PROTEUS_IGN_2,
Gpio::PROTEUS_IGN_1,
Gpio::PROTEUS_IGN_2,
PROTEUS_IGN_3,
PROTEUS_IGN_4,
PROTEUS_IGN_5,
@ -34,9 +34,9 @@ static const brain_pin_e ignPins[] = {
PROTEUS_IGN_7,
PROTEUS_IGN_8,
PROTEUS_IGN_9,
PROTEUS_IGN_10,
PROTEUS_IGN_11,
PROTEUS_IGN_12,
Gpio::PROTEUS_IGN_10,
Gpio::PROTEUS_IGN_11,
Gpio::PROTEUS_IGN_12,
};
static void setInjectorPins() {
@ -184,9 +184,9 @@ void setBoardDefaultConfiguration() {
engineConfiguration->injectionMode = IM_SIMULTANEOUS;
#if HW_PROTEUS & EFI_PROD_CODE
engineConfiguration->mainRelayPin = PROTEUS_LS_12;
engineConfiguration->fanPin = PROTEUS_LS_11;
engineConfiguration->fuelPumpPin = PROTEUS_LS_10;
engineConfiguration->mainRelayPin = Gpio::PROTEUS_LS_12;
engineConfiguration->fanPin = Gpio::PROTEUS_LS_11;
engineConfiguration->fuelPumpPin = Gpio::PROTEUS_LS_10;
#endif // HW_PROTEUS
// If we're running as hardware CI, borrow a few extra pins for that

76
firmware/config/boards/proteus_meta.h
View File

@ -12,40 +12,40 @@
#define PROTEUS_DEFAULT_AT_PULLUP 2700
#define PROTEUS_LS_1 Gpio::D7
#define PROTEUS_LS_1 D7
// pin 15/black35
#define PROTEUS_LS_2 Gpio::G9
#define PROTEUS_LS_2 G9
// pin 4/black35
#define PROTEUS_LS_3 Gpio::G10
#define PROTEUS_LS_3 G10
// pin 16/black35
#define PROTEUS_LS_4 Gpio::G11
#define PROTEUS_LS_4 G11
// pin 5/black35
#define PROTEUS_LS_5 Gpio::G12
#define PROTEUS_LS_5 G12
// pin 6/black35
#define PROTEUS_LS_6 Gpio::G13
#define PROTEUS_LS_6 G13
// pin 7/black35
#define PROTEUS_LS_7 Gpio::G14
#define PROTEUS_LS_8 Gpio::B4
#define PROTEUS_LS_9 Gpio::B5
#define PROTEUS_LS_7 G14
#define PROTEUS_LS_8 B4
#define PROTEUS_LS_9 B5
// pin 20/black35
#define PROTEUS_LS_10 Gpio::B6
#define PROTEUS_LS_11 Gpio::B7
#define PROTEUS_LS_12 Gpio::B8
#define PROTEUS_LS_10 B6
#define PROTEUS_LS_11 B7
#define PROTEUS_LS_12 B8
// pin 10/black35
#define PROTEUS_LS_13 Gpio::B9
#define PROTEUS_LS_13 B9
// pin 11/black35
#define PROTEUS_LS_14 Gpio::E0
#define PROTEUS_LS_14 E0
// pin 12/black35
#define PROTEUS_LS_15 Gpio::E1
#define PROTEUS_LS_15 E1
// pin 23/black35
#define PROTEUS_LS_16 Gpio::E2
#define PROTEUS_LS_16 E2
// pin 2/black35
@ -59,10 +59,10 @@
#define PROTEUS_HS_4 Gpio::D14
// pin 35/black35
#define PROTEUS_IGN_1 Gpio::D4
#define PROTEUS_IGN_1 D4
// pin 34/black35
#define PROTEUS_IGN_2 Gpio::D3
#define PROTEUS_IGN_2 D3
// pin 22/black35
#define PROTEUS_IGN_3 Gpio::C9
@ -72,9 +72,9 @@
#define PROTEUS_IGN_7 Gpio::G7
#define PROTEUS_IGN_8 Gpio::G6
#define PROTEUS_IGN_9 Gpio::G5
#define PROTEUS_IGN_10 Gpio::G4
#define PROTEUS_IGN_11 Gpio::G3
#define PROTEUS_IGN_12 Gpio::G2
#define PROTEUS_IGN_10 G4
#define PROTEUS_IGN_11 G3
#define PROTEUS_IGN_12 G2
// Analog Temp 1 = PC4
#define PROTEUS_IN_ANALOG_TEMP_1 EFI_ADC_14
@ -143,22 +143,24 @@
#if HW_PROTEUS
static Gpio PROTEUS_OUTPUTS[] = {
PROTEUS_LS_1,
PROTEUS_LS_2,
PROTEUS_LS_3,
PROTEUS_LS_4,
PROTEUS_LS_5,
PROTEUS_LS_6,
PROTEUS_LS_7,
PROTEUS_LS_8,
PROTEUS_LS_9,
PROTEUS_LS_10,
PROTEUS_LS_11,
PROTEUS_LS_12,
PROTEUS_LS_13,
PROTEUS_LS_14,
PROTEUS_LS_15,
PROTEUS_LS_16,
Gpio::PROTEUS_LS_1,
Gpio::PROTEUS_LS_2,
Gpio::PROTEUS_LS_3,
Gpio::PROTEUS_LS_4,
Gpio::PROTEUS_LS_5,
Gpio::PROTEUS_LS_6,
Gpio::PROTEUS_LS_7,
Gpio::PROTEUS_LS_8,
Gpio::PROTEUS_LS_9,
Gpio::PROTEUS_LS_10,
Gpio::PROTEUS_LS_11,
Gpio::PROTEUS_LS_12,
Gpio::PROTEUS_LS_13,
Gpio::PROTEUS_LS_14,
Gpio::PROTEUS_LS_15,
Gpio::PROTEUS_LS_16,
Gpio::PROTEUS_IGN_1,
Gpio::PROTEUS_IGN_2,
};
#endif // HW_PROTEUS

8
firmware/config/engines/bmw_m73.cpp
View File

@ -271,12 +271,12 @@ void setEngineBMW_M73_Proteus() {
engineConfiguration->clt.adcChannel = PROTEUS_IN_ANALOG_TEMP_4;
engineConfiguration->starterControlPin = PROTEUS_LS_14;
engineConfiguration->starterControlPin = Gpio::PROTEUS_LS_14;
engineConfiguration->startStopButtonPin = PROTEUS_DIGITAL_3;
engineConfiguration->startStopButtonMode = PI_PULLUP;
engineConfiguration->fuelPumpPin = PROTEUS_LS_16;
engineConfiguration->fanPin = PROTEUS_LS_15;
engineConfiguration->mainRelayPin = PROTEUS_LS_13;
engineConfiguration->fuelPumpPin = Gpio::PROTEUS_LS_16;
engineConfiguration->fanPin = Gpio::PROTEUS_LS_15;
engineConfiguration->mainRelayPin = Gpio::PROTEUS_LS_13;
engineConfiguration->map.sensor.hwChannel = PROTEUS_IN_ANALOG_VOLT_8; // M73 adapter board
engineConfiguration->map.sensor.type = MT_MPX4250A;

38
firmware/config/engines/custom_engine.cpp
View File

@ -491,29 +491,29 @@ void proteusBoardTest() {
engineConfiguration->fuelPumpPin = Gpio::Unassigned;
#if EFI_PROD_CODE
engineConfiguration->injectionPins[0] = PROTEUS_LS_1;
engineConfiguration->injectionPins[1] = PROTEUS_LS_2;
engineConfiguration->injectionPins[2] = PROTEUS_LS_3;
engineConfiguration->injectionPins[3] = PROTEUS_LS_4;
engineConfiguration->injectionPins[4] = PROTEUS_LS_5;
engineConfiguration->injectionPins[5] = PROTEUS_LS_6;
engineConfiguration->injectionPins[6] = PROTEUS_LS_9;
engineConfiguration->injectionPins[7] = PROTEUS_LS_8;
engineConfiguration->injectionPins[8] = PROTEUS_LS_11;
engineConfiguration->injectionPins[9] = PROTEUS_LS_10;
engineConfiguration->injectionPins[10] = PROTEUS_LS_12;
engineConfiguration->injectionPins[11] = PROTEUS_LS_13;
engineConfiguration->injectionPins[0] = Gpio::PROTEUS_LS_1;
engineConfiguration->injectionPins[1] = Gpio::PROTEUS_LS_2;
engineConfiguration->injectionPins[2] = Gpio::PROTEUS_LS_3;
engineConfiguration->injectionPins[3] = Gpio::PROTEUS_LS_4;
engineConfiguration->injectionPins[4] = Gpio::PROTEUS_LS_5;
engineConfiguration->injectionPins[5] = Gpio::PROTEUS_LS_6;
engineConfiguration->injectionPins[6] = Gpio::PROTEUS_LS_9;
engineConfiguration->injectionPins[7] = Gpio::PROTEUS_LS_8;
engineConfiguration->injectionPins[8] = Gpio::PROTEUS_LS_11;
engineConfiguration->injectionPins[9] = Gpio::PROTEUS_LS_10;
engineConfiguration->injectionPins[10] = Gpio::PROTEUS_LS_12;
engineConfiguration->injectionPins[11] = Gpio::PROTEUS_LS_13;
engineConfiguration->luaOutputPins[0] = PROTEUS_LS_7;
engineConfiguration->luaOutputPins[1] = PROTEUS_LS_14;
engineConfiguration->luaOutputPins[2] = PROTEUS_LS_15;
engineConfiguration->luaOutputPins[3] = PROTEUS_LS_16;
engineConfiguration->luaOutputPins[0] = Gpio::PROTEUS_LS_7;
engineConfiguration->luaOutputPins[1] = Gpio::PROTEUS_LS_14;
engineConfiguration->luaOutputPins[2] = Gpio::PROTEUS_LS_15;
engineConfiguration->luaOutputPins[3] = Gpio::PROTEUS_LS_16;
engineConfiguration->luaOutputPins[4] = PROTEUS_HS_2;
engineConfiguration->luaOutputPins[5] = PROTEUS_HS_4;
engineConfiguration->ignitionPins[0] = PROTEUS_IGN_1;
engineConfiguration->ignitionPins[1] = PROTEUS_IGN_2;
engineConfiguration->ignitionPins[0] = Gpio::PROTEUS_IGN_1;
engineConfiguration->ignitionPins[1] = Gpio::PROTEUS_IGN_2;
engineConfiguration->ignitionPins[2] = PROTEUS_IGN_4;
engineConfiguration->ignitionPins[3] = PROTEUS_IGN_5;
engineConfiguration->ignitionPins[4] = PROTEUS_IGN_6;
@ -524,7 +524,7 @@ void proteusBoardTest() {
engineConfiguration->ignitionPins[8] = PROTEUS_IGN_9;
engineConfiguration->ignitionPins[9] = PROTEUS_IGN_8;
engineConfiguration->ignitionPins[10] = PROTEUS_HS_1;
engineConfiguration->ignitionPins[11] = PROTEUS_IGN_12;
engineConfiguration->ignitionPins[11] = Gpio::PROTEUS_IGN_12;
strncpy(config->luaScript, R"(
startPwm(0, 10, 0.5)

6
firmware/config/engines/gm_sbc.cpp
View File

@ -80,12 +80,12 @@ void setSbc() {
#if HW_PROTEUS
// tan wire with a black trace - "HEI B", plug pin B
ignOverride->pin = PROTEUS_IGN_12;
ignOverride->pin = Gpio::PROTEUS_IGN_12;
engineConfiguration->fanPin = Gpio::Unassigned;
// reminder about D101
engineConfiguration->injectionPins[0] = PROTEUS_LS_14; // #1
engineConfiguration->injectionPins[0] = Gpio::PROTEUS_LS_14; // #1
// reminder about D104
engineConfiguration->injectionPins[3] = PROTEUS_LS_15; // #4
engineConfiguration->injectionPins[3] = Gpio::PROTEUS_LS_15; // #4
// wow high side relay control
engineConfiguration->fuelPumpPin = PROTEUS_HS_1;

2
firmware/config/engines/harley.cpp
View File

@ -16,7 +16,7 @@ void proteusHarley() {
engineConfiguration->mapCamDetectionAnglePosition = 50;
engineConfiguration->luaOutputPins[0] = PROTEUS_LS_12;
engineConfiguration->luaOutputPins[0] = Gpio::PROTEUS_LS_12;
#if HW_PROTEUS
strncpy(config->luaScript, R"(
outputIndex = 0

18
firmware/config/engines/honda_k_dbc.cpp
View File

@ -81,17 +81,17 @@ void setProteusHondaElement2003() {
// offset -41
engineConfiguration->injectionPins[0] = PROTEUS_LS_8;
engineConfiguration->injectionPins[1] = PROTEUS_LS_7;
engineConfiguration->injectionPins[2] = PROTEUS_LS_6;
engineConfiguration->injectionPins[3] = PROTEUS_LS_5;
engineConfiguration->injectionPins[0] = Gpio::PROTEUS_LS_8;
engineConfiguration->injectionPins[1] = Gpio::PROTEUS_LS_7;
engineConfiguration->injectionPins[2] = Gpio::PROTEUS_LS_6;
engineConfiguration->injectionPins[3] = Gpio::PROTEUS_LS_5;
vtsControl->pin = PROTEUS_HS_1;
engineConfiguration->vvtPins[0] = PROTEUS_HS_2;
engineConfiguration->malfunctionIndicatorPin = PROTEUS_LS_10;
engineConfiguration->idle.solenoidPin = PROTEUS_LS_15;
engineConfiguration->fanPin = PROTEUS_LS_1;
engineConfiguration->malfunctionIndicatorPin = Gpio::PROTEUS_LS_10;
engineConfiguration->idle.solenoidPin = Gpio::PROTEUS_LS_15;
engineConfiguration->fanPin = Gpio::PROTEUS_LS_1;
engineConfiguration->iat.adcChannel = PROTEUS_IN_ANALOG_TEMP_1;
engineConfiguration->clt.adcChannel = PROTEUS_IN_ANALOG_TEMP_2;
@ -99,8 +99,8 @@ void setProteusHondaElement2003() {
engineConfiguration->map.sensor.hwChannel = PROTEUS_IN_ANALOG_VOLT_6;
engineConfiguration->fanPin = Gpio::Unassigned;
engineConfiguration->mainRelayPin = PROTEUS_LS_9;
engineConfiguration->fuelPumpPin = PROTEUS_LS_11;
engineConfiguration->mainRelayPin = Gpio::PROTEUS_LS_9;
engineConfiguration->fuelPumpPin = Gpio::PROTEUS_LS_11;
#endif // HW_PROTEUS
}

14
firmware/config/engines/hyundai.cpp
View File

@ -84,14 +84,14 @@ void setHyundaiPb() {
setCommonNTCSensor(&engineConfiguration->clt, PROTEUS_DEFAULT_AT_PULLUP);
setCommonNTCSensor(&engineConfiguration->iat, PROTEUS_DEFAULT_AT_PULLUP);
// engineConfiguration->acRelayPin = PROTEUS_LS_6;
// engineConfiguration->acRelayPin = Gpio::PROTEUS_LS_6;
engineConfiguration->acSwitch = PROTEUS_DIGITAL_5;
engineConfiguration->fanPin = PROTEUS_LS_5;
engineConfiguration->tachOutputPin = PROTEUS_IGN_12;
engineConfiguration->hpfpValvePin = PROTEUS_LS_6;
engineConfiguration->vvtPins[0] = PROTEUS_LS_15; // intake
engineConfiguration->vvtPins[1] = PROTEUS_LS_16; // exhaust
engineConfiguration->fanPin = Gpio::PROTEUS_LS_5;
engineConfiguration->tachOutputPin = Gpio::PROTEUS_IGN_12;
engineConfiguration->hpfpValvePin = Gpio::PROTEUS_LS_6;
engineConfiguration->vvtPins[0] = Gpio::PROTEUS_LS_15; // intake
engineConfiguration->vvtPins[1] = Gpio::PROTEUS_LS_16; // exhaust
#endif // HW_PROTEUS
#if HW_PROTEUS
@ -210,7 +210,7 @@ void setProteusHyundaiPb() {
setProteusEtbIO();
// something something input levels are not happy for digital input pin?
engineConfiguration->starterControlPin = PROTEUS_LS_14;
engineConfiguration->starterControlPin = Gpio::PROTEUS_LS_14;
engineConfiguration->startStopButtonPin = PROTEUS_IN_AV_6_DIGITAL;
engineConfiguration->startStopButtonMode = PI_DEFAULT;
}

16
firmware/config/engines/mazda/mazda_miata_vvt.cpp
View File

@ -710,7 +710,7 @@ void setMiataNB2_Proteus() {
engineConfiguration->ignitionMode = IM_WASTED_SPARK;
#if EFI_PROD_CODE
engineConfiguration->ignitionPins[0] = PROTEUS_IGN_1;
engineConfiguration->ignitionPins[0] = Gpio::PROTEUS_IGN_1;
engineConfiguration->ignitionPins[1] = Gpio::Unassigned;
engineConfiguration->ignitionPins[2] = PROTEUS_IGN_3;
engineConfiguration->ignitionPins[3] = Gpio::Unassigned;
@ -719,14 +719,14 @@ void setMiataNB2_Proteus() {
engineConfiguration->injectionMode = IM_SEQUENTIAL;
engineConfiguration->injectionPins[0] = PROTEUS_LS_1; // BLU # pin 3/black35
engineConfiguration->injectionPins[1] = PROTEUS_LS_2; // BLK
engineConfiguration->injectionPins[2] = PROTEUS_LS_3; // GRN
engineConfiguration->injectionPins[3] = PROTEUS_LS_4; // WHT
engineConfiguration->injectionPins[0] = Gpio::PROTEUS_LS_1; // BLU # pin 3/black35
engineConfiguration->injectionPins[1] = Gpio::PROTEUS_LS_2; // BLK
engineConfiguration->injectionPins[2] = Gpio::PROTEUS_LS_3; // GRN
engineConfiguration->injectionPins[3] = Gpio::PROTEUS_LS_4; // WHT
engineConfiguration->enableSoftwareKnock = true;
engineConfiguration->malfunctionIndicatorPin = PROTEUS_LS_10;
engineConfiguration->malfunctionIndicatorPin = Gpio::PROTEUS_LS_10;
engineConfiguration->map.sensor.hwChannel = PROTEUS_IN_MAP;
@ -740,9 +740,9 @@ void setMiataNB2_Proteus() {
engineConfiguration->clt.adcChannel = PROTEUS_IN_ANALOG_TEMP_1;
engineConfiguration->iat.adcChannel = PROTEUS_IN_ANALOG_TEMP_3;
engineConfiguration->fuelPumpPin = PROTEUS_LS_6;
engineConfiguration->fuelPumpPin = Gpio::PROTEUS_LS_6;
engineConfiguration->idle.solenoidPin = PROTEUS_LS_7;
engineConfiguration->idle.solenoidPin = Gpio::PROTEUS_LS_7;
engineConfiguration->fanPin = Gpio::B7;

2
firmware/config/engines/test_engine.cpp
View File

@ -113,7 +113,7 @@ void setProteusAnalogPwmTest() {
engineConfiguration->triggerSimulatorPins[1] = Gpio::Unassigned;
// The idle control pin is connected to the default TPS input, analog volt 2
engineConfiguration->idle.solenoidPin = PROTEUS_IGN_10;
engineConfiguration->idle.solenoidPin = Gpio::PROTEUS_IGN_10;
// 5893hz is coprime with the analog sample rate, 500hz, so hopefully we get less aliasing
engineConfiguration->idle.solenoidFrequency = 5893;

12
firmware/config/engines/vw_b6.cpp
View File

@ -164,16 +164,16 @@ void setProteusVwPassatB6() {
engineConfiguration->highPressureFuel.hwChannel = PROTEUS_IN_ANALOG_VOLT_4;
gppwm_channel *coolantControl = &engineConfiguration->gppwm[0];
coolantControl->pin = PROTEUS_LS_5;
coolantControl->pin = Gpio::PROTEUS_LS_5;
engineConfiguration->mainRelayPin = PROTEUS_LS_6;
engineConfiguration->mainRelayPin = Gpio::PROTEUS_LS_6;
gppwm_channel *lowPressureFuelPumpControl = &engineConfiguration->gppwm[1];
lowPressureFuelPumpControl->pin = PROTEUS_LS_7;
lowPressureFuelPumpControl->pin = Gpio::PROTEUS_LS_7;
//engineConfiguration->boostControlPin = PROTEUS_LS_8;
engineConfiguration->vvtPins[0] = PROTEUS_LS_9;
engineConfiguration->hpfpValvePin = PROTEUS_LS_15;
//engineConfiguration->boostControlPin = Gpio::PROTEUS_LS_8;
engineConfiguration->vvtPins[0] = Gpio::PROTEUS_LS_9;
engineConfiguration->hpfpValvePin = Gpio::PROTEUS_LS_15;
setProteusEtbIO();

5
java_tools/configuration_definition/src/main/java/com/rusefi/pinout/PinoutLogic.java
View File

@ -151,8 +151,11 @@ public class PinoutLogic {
}
if (meta != null) {
pinId = map.get(meta);
if (pinId == null)
if (pinId == null) {
if (map.isEmpty())
throw new IllegalStateException("Empty meta mapping");
throw new IllegalStateException("Failing to resolve [" + meta + "]");
}
}
Object pinClass = pin.get("class");
Object pinName = pin.get("pin");