https://github.com/rusefi/uaefi/issues/1

firmware/config/boards/hellen/hellen-112-17/connectors/main.yaml

@@ -322,7 +322,7 @@ pins:
     meta: MM100_INJ3
     class: outputs
     type: ls
-    function: injector output 3
+    ts_name: ___ injector output 3
   - pin: 244
     meta: MM100_INJ1
     class: outputs
@@ -356,15 +356,19 @@ pins:
     color: purple
   - pin: 253
     meta: MM100_IGN2
+    class: outputs
     ts_name: ___ Coil 2
   - pin: 254
     meta: MM100_IGN3
+    class: outputs
     ts_name: ___ Coil 3
   - pin: 255
     meta: MM100_IGN4
+    class: outputs
     ts_name: ___ Coil 4
   - pin: 256
     meta: MM100_IGN1
+    class: outputs
     ts_name: ___ Coil 1
 
 

firmware/config/boards/hellen/uaefi/connectors/uaefi.yaml

@@ -0,0 +1,171 @@
+meta: config/boards/hellen_mm100_meta.h
+
+pins:
+  - pin: 1
+    function: Power GND
+    type: 2
+  - pin: 2
+    function: Power GND
+  - pin: 3
+    function: +12V From Main Relay
+  - pin: 4
+    meta: MM100_IN_VBATT
+    function: Ignition Switch KL15 / Battery Voltage Analog Input
+    ts_name: ___ Voltage From Key
+
+  - pin: 5
+    meta: MM100_INJ1
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 1
+  - pin: 6
+    meta: MM100_INJ2
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 2
+  - pin: 7
+    meta: MM100_INJ3
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 3
+  - pin: 8
+    meta: MM100_INJ4
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 4
+  - pin: 9
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 5
+  - pin: 10
+    class: outputs
+    type: ls
+    ts_name: ___ injector output 6
+  - pin: 11
+    meta: MM100_IGN1
+    class: outputs
+    ts_name: ___ Coil 1
+  - pin: 12
+    meta: MM100_IGN2
+    class: outputs
+    ts_name: ___ Coil 2
+  - pin: 13
+    meta: MM100_IGN3
+    class: outputs
+    ts_name: ___ Coil 3
+  - pin: 14
+    meta: MM100_IGN4
+    class: outputs
+    ts_name: ___ Coil 4
+  - pin: 15
+    class: outputs
+    ts_name: ___ Coil 5
+  - pin: 16
+    class: outputs
+    ts_name: ___ Coil 6
+
+  - pin: 17
+    function: ETB positive DC Motor
+    type: etb
+    color: purple
+  - pin: 18
+    function: ETB negative DC Motor
+    type: etb
+    color: purple
+
+  - pin: 19
+    meta: MM100_IGN8
+    class: outputs
+    type: ls
+    ts_name: ___ Main Relay
+    function: Main Relay Control
+  - pin: 20
+    meta: MM100_OUT_PWM5
+    class: outputs
+    type: ls
+    ts_name: ___ Fuel Pump Relay
+  - pin: 21
+    meta: MM100_OUT_PWM3
+    ts_name: ___ Relay Output
+    class: outputs
+    type: ls
+
+  - pin: 22
+    meta: MM100_IGN7
+    class: outputs
+    type: ls
+    ts_name: ___ Relay Output
+    color: orange
+  - pin: 23
+    meta: MM100_OUT_PWM4
+    class: outputs
+    type: ls
+    ts_name: ___ Engine Radiator Fan
+
+
+  - pin: 24
+    ts_name: ___ low side 1.5A output
+    class: outputs
+    type: ls
+  - pin: 25
+    ts_name: ___ low side 1.5A output or high side
+    class: outputs
+    type: ls
+
+
+  - pin: 103
+    function: Analog GND
+    type: GND
+  - pin: 104
+    function: Analog GND
+    type: GND
+  - pin: 105
+    function: Analog GND
+    type: GND
+  - pin: 106
+    function: Analog GND
+    type: GND
+
+
+  - pin: 223
+    function: ___ Analog Supply
+    color: red
+  - pin: 223_2
+    function: ___ Analog Supply
+    color: red
+  - pin: 223_3
+    function: ___ Analog Supply
+    color: red
+  - pin: 223_4
+    function: ___ Analog Supply
+    color: red
+
+  - pin: 215
+    meta: MM100_IN_CLT_ANALOG
+    class: analog_inputs
+    ts_name: ___ CLT
+    function: CLT sensor
+  - pin: 227
+    class: analog_inputs
+    meta: MM100_IN_IAT_ANALOG
+    ts_name: ___ IAT
+    function: ___ Intake Air Temperature
+
+
+
+
+  - pin: 132
+    function: CAN bus high
+    type: can
+
+  - pin: 144
+    function: CAN bus low
+    type: can
+
+
+info:
+  cid: uaefi
+  title: uaefi
+  directory: hellen/uaefi
+  board_url: https://github.com/rusefi/rusefi/wiki/uaefi
+