mirror of https://github.com/rusefi/rusefi.git
separate config for secondary injectors
This commit is contained in:
Matthew Kennedy
rusefillc
parent
8c73ae8ec6
commit
999d8d99fe
|
|
@ -4,31 +4,31 @@
|
|||
#include "table_helper.h"
|
||||
#include "mazda_miata_vvt.h"
|
||||
|
||||
static void setBosch02880155868() {
|
||||
static void setBosch02880155868(injector_s& cfg) {
|
||||
// http://www.boschdealer.com/specsheets/0280155868cs.jpg
|
||||
engineConfiguration->injector.battLagCorrBins[0] = 6;
|
||||
engineConfiguration->injector.battLagCorr[0] = 3.371;
|
||||
cfg.battLagCorrBins[0] = 6;
|
||||
cfg.battLagCorr[0] = 3.371;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[1] = 8;
|
||||
engineConfiguration->injector.battLagCorr[1] = 1.974;
|
||||
cfg.battLagCorrBins[1] = 8;
|
||||
cfg.battLagCorr[1] = 1.974;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[2] = 10;
|
||||
engineConfiguration->injector.battLagCorr[2] = 1.383;
|
||||
cfg.battLagCorrBins[2] = 10;
|
||||
cfg.battLagCorr[2] = 1.383;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[3] = 11;
|
||||
engineConfiguration->injector.battLagCorr[3] = 1.194;
|
||||
cfg.battLagCorrBins[3] = 11;
|
||||
cfg.battLagCorr[3] = 1.194;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[4] = 12;
|
||||
engineConfiguration->injector.battLagCorr[4] = 1.04;
|
||||
cfg.battLagCorrBins[4] = 12;
|
||||
cfg.battLagCorr[4] = 1.04;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[5] = 13;
|
||||
engineConfiguration->injector.battLagCorr[5] = 0.914;
|
||||
cfg.battLagCorrBins[5] = 13;
|
||||
cfg.battLagCorr[5] = 0.914;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[6] = 14;
|
||||
engineConfiguration->injector.battLagCorr[6] = 0.797;
|
||||
cfg.battLagCorrBins[6] = 14;
|
||||
cfg.battLagCorr[6] = 0.797;
|
||||
|
||||
engineConfiguration->injector.battLagCorrBins[7] = 15;
|
||||
engineConfiguration->injector.battLagCorr[7] = 0.726;
|
||||
cfg.battLagCorrBins[7] = 15;
|
||||
cfg.battLagCorr[7] = 0.726;
|
||||
}
|
||||
|
||||
static void setDefaultWarmupFuelEnrichment() {
|
||||
|
|
@ -255,13 +255,15 @@ void setDefaultFuel() {
|
|||
* By the way http://users.erols.com/srweiss/tableifc.htm has a LOT of data
|
||||
*/
|
||||
engineConfiguration->injector.flow = 200;
|
||||
engineConfiguration->injectorSecondary.flow = 200;
|
||||
engineConfiguration->stoichRatioPrimary = STOICH_RATIO;
|
||||
|
||||
// 9.0 = E100 pure ethanol
|
||||
engineConfiguration->stoichRatioSecondary = 9.0f;
|
||||
|
||||
// Injector deadtime
|
||||
setBosch02880155868();
|
||||
setBosch02880155868(engineConfiguration->injector);
|
||||
setBosch02880155868(engineConfiguration->injectorSecondary);
|
||||
|
||||
// Tables
|
||||
setFuelTablesLoadBin(10, 160);
|
||||
|
|
|
|||
|
|
@ -231,6 +231,6 @@ InjectorModelPrimary::InjectorModelPrimary()
|
|||
|
||||
// TODO: actual separate config for second bank!
|
||||
InjectorModelSecondary::InjectorModelSecondary()
|
||||
: InjectorModelWithConfig(&engineConfiguration->injector)
|
||||
: InjectorModelWithConfig(&engineConfiguration->injectorSecondary)
|
||||
{
|
||||
}
|
||||
|
|
|
|||
|
|
@ -99,7 +99,7 @@
|
|||
! Any time an incompatible change is made to the configuration format stored in flash,
|
||||
! update this string to the current date! It is required to also update TS_SIGNATURE above
|
||||
! when this happens.
|
||||
#define FLASH_DATA_VERSION 230721
|
||||
#define FLASH_DATA_VERSION 20014
|
||||
|
||||
! this offset is part of console compatibility mechanism, please DO NOT change this offset
|
||||
#define TS_FILE_VERSION_OFFSET 124
|
||||
|
|
@ -428,6 +428,7 @@ struct injector_s
|
|||
end_struct
|
||||
|
||||
injector_s injector
|
||||
injector_s injectorSecondary
|
||||
|
||||
bit isForcedInduction;Does the vehicle have a turbo or supercharger?
|
||||
bit useFordRedundantTps;On some Ford and Toyota vehicles one of the throttle sensors is not linear on the full range, i.e. in the specific range of the positions we effectively have only one sensor.
|
||||
|
|
|
|||
|
|
@ -452,6 +452,14 @@ enable2ndByteCanID = false
|
|||
yBins = injector_battLagCorr
|
||||
gauge = VBattGauge
|
||||
|
||||
curve = injectorsSecondaryDeadTime, "Secondary injector dead time"
|
||||
columnLabel = "Battery", "Dead Time"
|
||||
xAxis = 6, 16, 11
|
||||
yAxis = 0, 8, 9
|
||||
xBins = injectorSecondary_battLagCorrBins, VBatt
|
||||
yBins = injectorSecondary_battLagCorr
|
||||
gauge = VBattGauge
|
||||
|
||||
curve = vrThresholdCurve1, "VR 1 Threshold"
|
||||
columnLabel = "RPM", "Voltage"
|
||||
xAxis = 0, 8000, 9
|
||||
|
|
@ -1745,7 +1753,10 @@ menuDialog = main
|
|||
subMenu = injectionSettings, "Injection hardware", 0, {isInjectionEnabled == 1}
|
||||
subMenu = cylinderBankSelect, "Cylinder bank selection", 0, {isInjectionEnabled == 1}
|
||||
subMenu = injectorNonlinear, "Injector small-pulse correction", 0, {isInjectionEnabled == 1}
|
||||
|
||||
subMenu = stagedInjection, "Staged injection", 0, {isInjectionEnabled}
|
||||
subMenu = stagedInjectionOutputs, "Staged injection outputs", 0, {isInjectionEnabled && enableStagedInjection}
|
||||
subMenu = stagedInjectionTbl, "Staged injection % table", 0, {isInjectionEnabled && enableStagedInjection}
|
||||
|
||||
groupMenu = "Cylinder fuel trims"
|
||||
groupChildMenu = fuelTrimTbl1, "Fuel trim cyl 1"
|
||||
|
|
@ -2571,7 +2582,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
|
|||
panel = baseInjection
|
||||
panel = injChars
|
||||
panel = fuelParams
|
||||
panel = injectorsDeadTime
|
||||
panel = injectorsDeadTime, {isInjectionEnabled}
|
||||
|
||||
dialog = ignitionCylExtra, "Cylinder offsets"
|
||||
field = "Offset angle for each cylinder if you have an odd fire"
|
||||
|
|
@ -2590,9 +2601,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
|
|||
field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10}
|
||||
field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11}
|
||||
|
||||
dialog = stagedInjectionLeft, "", yAxis
|
||||
field = "Enable", enableStagedInjection, {isInjectionEnabled}
|
||||
field = ""
|
||||
dialog = stagedInjectionOutputs, "", yAxis
|
||||
field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection}
|
||||
field = "Injection Stage 2 Output 2", injectionPinsStage22, {isInjectionEnabled && enableStagedInjection && injectionMode != 3 && cylindersCount > 1}
|
||||
field = "Injection Stage 2 Output 3", injectionPinsStage23, {isInjectionEnabled && enableStagedInjection && injectionMode != @@injection_mode_e_IM_SINGLE_POINT@@ && cylindersCount > 2}
|
||||
|
|
@ -2606,9 +2615,12 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
|
|||
field = "Injection Stage 2 Output 11 ", injectionPinsStage211, {isInjectionEnabled && enableStagedInjection && cylindersCount > 10}
|
||||
field = "Injection Stage 2 Output 12 ", injectionPinsStage212, {isInjectionEnabled && enableStagedInjection && cylindersCount > 11}
|
||||
|
||||
dialog = stagedInjection, "", xAxis
|
||||
panel = stagedInjectionLeft
|
||||
panel = stagedInjectionTbl, {isInjectionEnabled && enableStagedInjection}
|
||||
dialog = stagedInjection, "", yAxis
|
||||
field = "Enable", enableStagedInjection, {isInjectionEnabled}
|
||||
field = ""
|
||||
field = "Secondary injector flow", injectorSecondary_flow {isInjectionEnabled && enableStagedInjection}
|
||||
field = ""
|
||||
panel = injectorsSecondaryDeadTime, {isInjectionEnabled && enableStagedInjection}
|
||||
|
||||
dialog = multisparkDwellParams, "Delay & Dwell"
|
||||
field = "Spark duration", multisparkSparkDuration, {multisparkEnable}
|
||||
|
|
|
|||
Loading…
Reference in New Issue