rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

cj125 usability

This commit is contained in:
rusefi 2020-03-17 10:20:29 -04:00
parent 76303476ca
commit a371b32073
9 changed files with 30 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 14 09:14:27 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Tue Mar 17 10:18:26 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONFIG_BOARDS_KINETIS_CONFIG_CONTROLLERS_ALGO_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -580,6 +580,7 @@ struct engine_configuration_s {
offset 76 bit 9 */
bool useBiQuadAnalogFiltering : 1;
/**
* Is your UA CJ125 output wired to MCU via resistor divider?
offset 76 bit 10 */
bool cj125isUaDivided : 1;
/**
@ -595,7 +596,8 @@ struct engine_configuration_s {
offset 76 bit 14 */
bool showSdCardWarning : 1;
/**
* looks like 3v range should be enough, divider not needed
* Is your UR CJ125 output wired to MCU via resistor divider?
* Looks like 3v range should be enough, divider generally not needed.
offset 76 bit 15 */
bool cj125isUrDivided : 1;
/**
@ -3228,4 +3230,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 14 09:14:27 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Tue Mar 17 10:18:26 EDT 2020

8
firmware/controllers/generated/engine_configuration_generated_structures.h
View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:04 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:11 EDT 2020
// by class com.rusefi.output.CHeaderConsumer
// begin
#ifndef CONTROLLERS_GENERATED_ENGINE_CONFIGURATION_GENERATED_STRUCTURES_H
@ -580,6 +580,7 @@ struct engine_configuration_s {
offset 76 bit 9 */
bool useBiQuadAnalogFiltering : 1;
/**
* Is your UA CJ125 output wired to MCU via resistor divider?
offset 76 bit 10 */
bool cj125isUaDivided : 1;
/**
@ -595,7 +596,8 @@ struct engine_configuration_s {
offset 76 bit 14 */
bool showSdCardWarning : 1;
/**
* looks like 3v range should be enough, divider not needed
* Is your UR CJ125 output wired to MCU via resistor divider?
* Looks like 3v range should be enough, divider generally not needed.
offset 76 bit 15 */
bool cj125isUrDivided : 1;
/**
@ -3228,4 +3230,4 @@ typedef struct persistent_config_s persistent_config_s;
#endif
// end
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:04 EDT 2020
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:11 EDT 2020

4
firmware/integration/rusefi_config.txt
View File

@ -331,12 +331,12 @@ bit isVerboseAuxPid3;
bit activateAuxPid4;
bit isVerboseAuxPid4;
bit useBiQuadAnalogFiltering;
bit cj125isUaDivided;
bit cj125isUaDivided;+Is your UA CJ125 output wired to MCU via resistor divider?
bit cj125isLsu49;
bit etb_use_two_wires;
bit isDoubleSolenoidIdle;
bit showSdCardWarning;
bit cj125isUrDivided;looks like 3v range should be enough, divider not needed
bit cj125isUrDivided;+Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed.
bit useTLE8888_hall_mode;
bit useTLE8888_cranking_hack;
bit useInstantRpmForIdle;

4
firmware/tunerstudio/rusefi.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:04 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:11 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

4
firmware/tunerstudio/rusefi_frankenso.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:14 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:18 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

4
firmware/tunerstudio/rusefi_kinetis.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Sat Mar 14 09:14:27 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration/rusefi_config.txt Tue Mar 17 10:18:26 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

4
firmware/tunerstudio/rusefi_microrusefi.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:09 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:15 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

4
firmware/tunerstudio/rusefi_prometheus.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:19 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:21 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"

4
firmware/tunerstudio/rusefi_proteus.ini
View File

@ -85,7 +85,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Sat Mar 14 09:14:23 EDT 2020
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on integration\rusefi_config.txt Tue Mar 17 10:18:23 EDT 2020
pageSize = 20000
page = 1
@ -1090,6 +1090,8 @@ page = 1
[SettingContextHelp]
injector_flow = "This is your injector flow at the fuel pressure used in the vehicle. cc/min, cubic centimetre per minute\nBy the way, g/s = 0.125997881 * (lb/hr)\ng/s = 0.125997881 * (cc/min)/10.5\ng/s = 0.0119997981 * cc/min"
directSelfStimulation = "Should trigger emulator push data right into trigger handling logic, eliminating the need for physical jumper wires?\nSee also triggerSimulatorPins\nPS: Funny name, right? :)"
cj125isUaDivided = "Is your UA CJ125 output wired to MCU via resistor divider?"
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
tpsErrorDetectionTooLow = "TPS error detection, what TPS % value is unrealistically low"
tpsErrorDetectionTooHigh = "TPS error detection, what TPS % value is unrealistically high"