mirror of https://github.com/rusefi/rusefi.git
hellen81 initial files
This commit is contained in:
parent
eb1e0eeaf7
commit
b3db60a029
|
@ -0,0 +1,2 @@
|
|||
@echo off
|
||||
bash.exe compile_hellen81.sh
|
|
@ -0,0 +1,355 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
|
||||
/*
|
||||
* Setup for STMicroelectronics STM32F4-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_NAME "Hellen81"
|
||||
|
||||
#define EFI_USB_AF 10U
|
||||
#define EFI_USB_SERIAL_DM GPIOA_11
|
||||
#define EFI_USB_SERIAL_DP GPIOA_12
|
||||
|
||||
// Ignore USB VBUS pin (we're never a host, only a device)
|
||||
#define BOARD_OTG_NOVBUSSENS TRUE
|
||||
|
||||
/*
|
||||
* Default to input mode, with internal PULLDOWN resistor enabled.
|
||||
* Pulldowns are more safe because most of MCU outputs on Hellen are high-active.
|
||||
*/
|
||||
#define EFI_PIN_MODE_DEFAULT PIN_MODE_INPUT
|
||||
#define EFI_DR_DEFAULT PIN_PUPDR_PULLDOWN
|
||||
|
||||
// See https://github.com/rusefi/rusefi/issues/397
|
||||
#define DEFAULT_GPIO_SPEED PIN_OSPEED_HIGH
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: LSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768U
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 8000000U
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Board voltages.
|
||||
* Required for performance limits calculation.
|
||||
*/
|
||||
#define STM32_VDD 300U
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_SWDIO 13
|
||||
#define GPIOA_SWCLK 14
|
||||
|
||||
#define GPIOB_SWO 3
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
#define VAL_GPIO_MODER_ALL_DEFAULT (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
EFI_PIN_MODE_DEFAULT(3) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
EFI_PIN_MODE_DEFAULT(11) | \
|
||||
EFI_PIN_MODE_DEFAULT(12) | \
|
||||
EFI_PIN_MODE_DEFAULT(13) | \
|
||||
EFI_PIN_MODE_DEFAULT(14) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
|
||||
#define VAL_GPIO_OTYPER_ALL_DEFAULT (PIN_OTYPE_PUSHPULL(0) | \
|
||||
PIN_OTYPE_PUSHPULL(1) | \
|
||||
PIN_OTYPE_PUSHPULL(2) | \
|
||||
PIN_OTYPE_PUSHPULL(3) | \
|
||||
PIN_OTYPE_PUSHPULL(4) | \
|
||||
PIN_OTYPE_PUSHPULL(5) | \
|
||||
PIN_OTYPE_PUSHPULL(6) | \
|
||||
PIN_OTYPE_PUSHPULL(7) | \
|
||||
PIN_OTYPE_PUSHPULL(8) | \
|
||||
PIN_OTYPE_PUSHPULL(9) | \
|
||||
PIN_OTYPE_PUSHPULL(10) | \
|
||||
PIN_OTYPE_PUSHPULL(11) | \
|
||||
PIN_OTYPE_PUSHPULL(12) | \
|
||||
PIN_OTYPE_PUSHPULL(13) | \
|
||||
PIN_OTYPE_PUSHPULL(14) | \
|
||||
PIN_OTYPE_PUSHPULL(15))
|
||||
|
||||
#define VAL_GPIO_OSPEEDR_ALL_DEFAULT (DEFAULT_GPIO_SPEED(0) | \
|
||||
DEFAULT_GPIO_SPEED(1) | \
|
||||
DEFAULT_GPIO_SPEED(2) | \
|
||||
DEFAULT_GPIO_SPEED(3) | \
|
||||
DEFAULT_GPIO_SPEED(4) | \
|
||||
DEFAULT_GPIO_SPEED(5) | \
|
||||
DEFAULT_GPIO_SPEED(6) | \
|
||||
DEFAULT_GPIO_SPEED(7) | \
|
||||
DEFAULT_GPIO_SPEED(8) | \
|
||||
DEFAULT_GPIO_SPEED(9) | \
|
||||
DEFAULT_GPIO_SPEED(10) | \
|
||||
DEFAULT_GPIO_SPEED(11) | \
|
||||
DEFAULT_GPIO_SPEED(12) | \
|
||||
DEFAULT_GPIO_SPEED(13) | \
|
||||
DEFAULT_GPIO_SPEED(14) | \
|
||||
DEFAULT_GPIO_SPEED(15))
|
||||
|
||||
#define VAL_GPIO_ODR_ALL_DEFAULT 0
|
||||
|
||||
#define VAL_GPIO_PUPDR_ALL_DEFAULT (EFI_DR_DEFAULT(0) | \
|
||||
EFI_DR_DEFAULT(1) | \
|
||||
EFI_DR_DEFAULT(2) | \
|
||||
EFI_DR_DEFAULT(3) | \
|
||||
EFI_DR_DEFAULT(4) | \
|
||||
EFI_DR_DEFAULT(5) | \
|
||||
EFI_DR_DEFAULT(6) | \
|
||||
EFI_DR_DEFAULT(7) | \
|
||||
EFI_DR_DEFAULT(8) | \
|
||||
EFI_DR_DEFAULT(9) | \
|
||||
EFI_DR_DEFAULT(10) | \
|
||||
EFI_DR_DEFAULT(11) | \
|
||||
EFI_DR_DEFAULT(12) | \
|
||||
EFI_DR_DEFAULT(13) | \
|
||||
EFI_DR_DEFAULT(14) | \
|
||||
EFI_DR_DEFAULT(15))
|
||||
|
||||
#define VAL_GPIO_AF_ALL_DEFAULT (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(3, 0U) | \
|
||||
PIN_AFIO_AF(4, 0U) | \
|
||||
PIN_AFIO_AF(5, 0U) | \
|
||||
PIN_AFIO_AF(6, 0U) | \
|
||||
PIN_AFIO_AF(7, 0U))
|
||||
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA11 - OTG_FS_DM (alternate 10).
|
||||
* PA12 - OTG_FS_DP (alternate 10).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
EFI_PIN_MODE_DEFAULT(3) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
PIN_MODE_ALTERNATE(11) | \
|
||||
PIN_MODE_ALTERNATE(12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
#define VAL_GPIOA_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOA_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(3, 0U) | \
|
||||
PIN_AFIO_AF(4, 6U) | \
|
||||
PIN_AFIO_AF(5, 5U) | \
|
||||
PIN_AFIO_AF(6, 5U) | \
|
||||
PIN_AFIO_AF(7, 5U))
|
||||
#define VAL_GPIOA_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* Default except SWO configured on PB3
|
||||
*
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
EFI_PIN_MODE_DEFAULT(11) | \
|
||||
EFI_PIN_MODE_DEFAULT(12) | \
|
||||
EFI_PIN_MODE_DEFAULT(13) | \
|
||||
EFI_PIN_MODE_DEFAULT(14) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
#define VAL_GPIOB_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOB_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SWO, 0U) | \
|
||||
PIN_AFIO_AF(4, 0U) | \
|
||||
PIN_AFIO_AF(5, 0U) | \
|
||||
PIN_AFIO_AF(6, 0U) | \
|
||||
PIN_AFIO_AF(7, 0U))
|
||||
#define VAL_GPIOB_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*/
|
||||
#define VAL_GPIOC_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOC_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOC_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOC_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*/
|
||||
#define VAL_GPIOD_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOD_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOD_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOD_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*/
|
||||
#define VAL_GPIOE_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOE_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOE_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOE_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*/
|
||||
#define VAL_GPIOF_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOF_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOF_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOF_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOG setup:
|
||||
*/
|
||||
#define VAL_GPIOG_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOG_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOG_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOG_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOH setup:
|
||||
*/
|
||||
#define VAL_GPIOH_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOH_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOH_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOH_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOI setup:
|
||||
*/
|
||||
#define VAL_GPIOI_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOI_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOI_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOI_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOJ setup:
|
||||
*/
|
||||
#define VAL_GPIOJ_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOJ_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOK setup:
|
||||
*/
|
||||
#define VAL_GPIOK_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOK_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOK_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOK_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOK_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOK_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOK_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
#endif /* BOARD_H */
|
|
@ -0,0 +1,55 @@
|
|||
# Combine the related files for a specific platform and MCU.
|
||||
|
||||
# Target ECU board design
|
||||
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen81/board_configuration.cpp
|
||||
BOARDINC = $(BOARDS_DIR)/hellen/hellen81
|
||||
|
||||
# Set this if you want a default engine type other than normal Hellen81
|
||||
ifeq ($(DEFAULT_ENGINE_TYPE),)
|
||||
DEFAULT_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=MINIMAL_PINS
|
||||
endif
|
||||
|
||||
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
|
||||
LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=GPIOH_8
|
||||
endif
|
||||
|
||||
ifeq ($(LED_COMMUNICATION_BRAIN_PIN),)
|
||||
LED_COMMUNICATION_BRAIN_PIN = -DEFI_COMMUNICATION_PIN=GPIOH_10
|
||||
endif
|
||||
|
||||
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
|
||||
|
||||
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
|
||||
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
|
||||
DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY
|
||||
DDEFS += -DEFI_CAN_SERIAL=TRUE -DTS_CAN_DEVICE_SHORT_PACKETS_IN_ONE_FRAME=TRUE
|
||||
# todo debug:
|
||||
DDEFS += -DDISABLE_CAN_UPDATE_DASH=TRUE
|
||||
|
||||
# Add them all together
|
||||
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"hellen81\" $(DEFAULT_ENGINE_TYPE) $(LED_CRITICAL_ERROR_BRAIN_PIN) $(LED_COMMUNICATION_BRAIN_PIN)
|
||||
#DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
||||
#DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE -DHAL_VSS_USE_PAL=TRUE
|
||||
DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_ADC=TRUE -DHAL_VSS_USE_PAL=TRUE
|
||||
# todo: is it broken?
|
||||
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
|
||||
|
||||
TRIGGER_USE_ADC = yes
|
||||
|
||||
# we need fast ADC for software trigger detector
|
||||
#DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DADC_SLOW_DEVICE=ADCD3 -DSTM32_ADC_USE_ADC3=TRUE
|
||||
#DDEFS += -DADC_SLOW_DEVICE=ADCD3 -DSTM32_ADC_USE_ADC3=TRUE
|
||||
|
||||
DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DEFI_USE_ONLY_FAST_ADC=TRUE -DEFI_FASTER_UNIFORM_ADC=TRUE -DADC_MAX_CHANNELS_COUNT=16 -DADC_BUF_DEPTH_FAST=1 -DADC_BUF_NUM_AVG=1
|
||||
#DDEFS += -DADC_SLOW_DEVICE=ADCD1
|
||||
|
||||
# We are running on Hellen-One hardware!
|
||||
DDEFS += -DHW_HELLEN=1
|
||||
|
||||
# Shared variables
|
||||
ALLCPPSRC += $(BOARDCPPSRC)
|
||||
ALLINC += $(BOARDINC)
|
|
@ -0,0 +1,200 @@
|
|||
/**
|
||||
* @file boards/hellen/hellen81/board_configuration.cpp
|
||||
*
|
||||
*
|
||||
* @brief Configuration defaults for the Hellen81 board
|
||||
*
|
||||
* See https://rusefi.com/s/hellen81
|
||||
*
|
||||
* @author andreika <prometheus.pcb@gmail.com>
|
||||
* @author Andrey Belomutskiy, (c) 2012-2021
|
||||
*/
|
||||
|
||||
#include "global.h"
|
||||
#include "engine.h"
|
||||
#include "engine_math.h"
|
||||
#include "allsensors.h"
|
||||
#include "fsio_impl.h"
|
||||
#include "engine_configuration.h"
|
||||
|
||||
|
||||
static void setInjectorPins() {
|
||||
engineConfiguration->injectionPins[0] = GPIOG_7;
|
||||
engineConfiguration->injectionPins[1] = GPIOG_8;
|
||||
engineConfiguration->injectionPins[2] = GPIOD_11;
|
||||
engineConfiguration->injectionPins[3] = GPIOD_10;
|
||||
|
||||
//engineConfiguration->injectionPins[4] = GPIOD_9;
|
||||
//engineConfiguration->injectionPins[5] = GPIOF_12;
|
||||
//engineConfiguration->injectionPins[6] = GPIOF_13;
|
||||
//engineConfiguration->injectionPins[7] = GPIOF_14;
|
||||
|
||||
// Disable remainder
|
||||
for (int i = 4; i < MAX_CYLINDER_COUNT;i++) {
|
||||
engineConfiguration->injectionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->injectionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setIgnitionPins() {
|
||||
engineConfiguration->ignitionPins[0] = GPIOI_8;
|
||||
engineConfiguration->ignitionPins[1] = GPIOE_5;
|
||||
engineConfiguration->ignitionPins[2] = GPIOE_4;
|
||||
engineConfiguration->ignitionPins[3] = GPIOE_3;
|
||||
|
||||
// disable remainder
|
||||
for (int i = 4; i < MAX_CYLINDER_COUNT; i++) {
|
||||
engineConfiguration->ignitionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->ignitionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setLedPins() {
|
||||
#ifdef EFI_COMMUNICATION_PIN
|
||||
engineConfiguration->communicationLedPin = EFI_COMMUNICATION_PIN;
|
||||
#else
|
||||
engineConfiguration->communicationLedPin = GPIOH_10;
|
||||
#endif /* EFI_COMMUNICATION_PIN */
|
||||
|
||||
//!!!!!!!!!!!
|
||||
engineConfiguration->runningLedPin = GPIO_UNASSIGNED;
|
||||
//engineConfiguration->runningLedPin = GPIOH_9; // green
|
||||
|
||||
engineConfiguration->warningLedPin = GPIOH_11; // yellow
|
||||
}
|
||||
|
||||
static void setupVbatt() {
|
||||
// 4.7k high side/4.7k low side = 2.0 ratio divider
|
||||
engineConfiguration->analogInputDividerCoefficient = 2.0f;
|
||||
|
||||
// set vbatt_divider 5.835
|
||||
// 33k / 6.8k
|
||||
engineConfiguration->vbattDividerCoeff = (33 + 6.8) / 6.8; // 5.835
|
||||
|
||||
// pin input +12 from Main Relay
|
||||
engineConfiguration->vbattAdcChannel = EFI_ADC_5;
|
||||
|
||||
engineConfiguration->adcVcc = 3.29f;
|
||||
}
|
||||
|
||||
static void setupDefaultSensorInputs() {
|
||||
// trigger inputs
|
||||
engineConfiguration->triggerInputPins[0] = GPIOB_1;
|
||||
engineConfiguration->triggerInputPins[1] = GPIO_UNASSIGNED;
|
||||
engineConfiguration->triggerInputPins[2] = GPIO_UNASSIGNED;
|
||||
// Direct hall-only cam input
|
||||
engineConfiguration->camInputs[0] = GPIOA_6;
|
||||
|
||||
engineConfiguration->tps1_1AdcChannel = EFI_ADC_4;
|
||||
engineConfiguration->tps2_1AdcChannel = EFI_ADC_NONE;
|
||||
|
||||
engineConfiguration->mafAdcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->map.sensor.hwChannel = EFI_ADC_10;
|
||||
|
||||
engineConfiguration->afr.hwChannel = EFI_ADC_0; // ADC1_16
|
||||
|
||||
engineConfiguration->clt.adcChannel = EFI_ADC_12; // ADC3_0
|
||||
|
||||
engineConfiguration->iat.adcChannel = EFI_ADC_13; // ADC3_1
|
||||
|
||||
engineConfiguration->auxTempSensor1.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->auxTempSensor2.adcChannel = EFI_ADC_NONE;
|
||||
}
|
||||
|
||||
void setBoardConfigOverrides(void) {
|
||||
setLedPins();
|
||||
setupVbatt();
|
||||
setSdCardConfigurationOverrides();
|
||||
|
||||
engineConfiguration->clt.config.bias_resistor = 4700;
|
||||
engineConfiguration->iat.config.bias_resistor = 4700;
|
||||
|
||||
engineConfiguration->canTxPin = GPIOD_1;
|
||||
engineConfiguration->canRxPin = GPIOD_0;
|
||||
}
|
||||
|
||||
void setPinConfigurationOverrides(void) {
|
||||
}
|
||||
|
||||
void setSerialConfigurationOverrides(void) {
|
||||
engineConfiguration->useSerialPort = false;
|
||||
engineConfiguration->binarySerialTxPin = GPIO_UNASSIGNED;
|
||||
engineConfiguration->binarySerialRxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialTxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialRxPin = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Board-specific configuration defaults.
|
||||
*
|
||||
* See also setDefaultEngineConfiguration
|
||||
*
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setBoardDefaultConfiguration(void) {
|
||||
setInjectorPins();
|
||||
setIgnitionPins();
|
||||
|
||||
engineConfiguration->isSdCardEnabled = true;
|
||||
|
||||
engineConfiguration->canTxPin = GPIOD_1;
|
||||
engineConfiguration->canRxPin = GPIOD_0;
|
||||
|
||||
engineConfiguration->fuelPumpPin = GPIOG_2; // OUT_IO9
|
||||
engineConfiguration->fanPin = GPIOD_12; // OUT_PWM8
|
||||
engineConfiguration->mainRelayPin = GPIOI_2; // OUT_LOW3
|
||||
engineConfiguration->tachOutputPin = GPIOD_14; // OUT_PWM6
|
||||
|
||||
engineConfiguration->useStepperIdle = true;
|
||||
engineConfiguration->useHbridges = true;
|
||||
engineConfiguration->stepperDcIo[0].directionPin1 = GPIOC_6; // COIL_A1 = OUT_PWM2
|
||||
engineConfiguration->stepperDcIo[0].directionPin2 = GPIOC_7; // COIL_A2 = OUT_PWM3
|
||||
engineConfiguration->stepperDcIo[1].directionPin1 = GPIOC_8; // COIL_B1 = OUT_PWM4
|
||||
engineConfiguration->stepperDcIo[1].directionPin2 = GPIOC_9; // COIL_B2 = OUT_PWM5
|
||||
|
||||
// "required" hardware is done - set some reasonable defaults
|
||||
setupDefaultSensorInputs();
|
||||
|
||||
// Some sensible defaults for other options
|
||||
setOperationMode(engineConfiguration, FOUR_STROKE_CRANK_SENSOR);
|
||||
engineConfiguration->trigger.type = TT_TOOTHED_WHEEL_60_2;
|
||||
engineConfiguration->useOnlyRisingEdgeForTrigger = true;
|
||||
setAlgorithm(LM_SPEED_DENSITY PASS_CONFIG_PARAMETER_SUFFIX);
|
||||
|
||||
engineConfiguration->specs.cylindersCount = 4;
|
||||
engineConfiguration->specs.firingOrder = FO_1_3_4_2;
|
||||
|
||||
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
|
||||
engineConfiguration->crankingInjectionMode = IM_SIMULTANEOUS;
|
||||
engineConfiguration->injectionMode = IM_SEQUENTIAL; // IM_SIMULTANEOUS; //IM_BATCH;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Board-specific SD card configuration code overrides. Needed by bootloader code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setSdCardConfigurationOverrides(void) {
|
||||
// Hellen81a uses SPI2 for SD-card
|
||||
#if 1
|
||||
engineConfiguration->sdCardSpiDevice = SPI_DEVICE_2;
|
||||
|
||||
engineConfiguration->spi2mosiPin = GPIOB_15;
|
||||
engineConfiguration->spi2misoPin = GPIOB_14;
|
||||
engineConfiguration->spi2sckPin = GPIOB_13;
|
||||
engineConfiguration->sdCardCsPin = GPIOB_12;
|
||||
|
||||
CONFIG(is_enabled_spi_2) = true;
|
||||
#else
|
||||
engineConfiguration->sdCardSpiDevice = SPI_DEVICE_3;
|
||||
|
||||
engineConfiguration->spi3mosiPin = GPIOC_12;
|
||||
engineConfiguration->spi3misoPin = GPIOC_11;
|
||||
engineConfiguration->spi3sckPin = GPIOC_10;
|
||||
engineConfiguration->sdCardCsPin = GPIOA_15;
|
||||
|
||||
CONFIG(is_enabled_spi_3) = true;
|
||||
#endif
|
||||
}
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/bash
|
||||
|
||||
export PROJECT_BOARD=hellen/hellen81
|
||||
export PROJECT_CPU=ARCH_STM32H7
|
||||
export EXTRA_PARAMS="-DSHORT_BOARD_NAME=hellen81"
|
||||
|
||||
cd ..
|
||||
bash ../common_make.sh
|
Binary file not shown.
After Width: | Height: | Size: 757 KiB |
|
@ -0,0 +1,759 @@
|
|||
#
|
||||
#
|
||||
|
||||
pins:
|
||||
- pin: 1
|
||||
function: Ignition 2 Output
|
||||
id: GPIOE_5
|
||||
class: outputs
|
||||
ts_name: 1 - IGN_2
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 2
|
||||
function: Ignition 3 (2+3) Output
|
||||
id: GPIOE_4
|
||||
class: outputs
|
||||
ts_name: 2 - IGN_3
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 3
|
||||
function: Ignition GND
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 4
|
||||
function: Ignition 4 Output
|
||||
id: GPIOE_3
|
||||
class: outputs
|
||||
ts_name: 4 - IGN_4
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 5
|
||||
function: Ignition 1 (1+4) Output
|
||||
id: GPIOI_8
|
||||
class: outputs
|
||||
ts_name: 5 - IGN_1
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 6
|
||||
function: Injector 2 Output
|
||||
id: GPIOG_8
|
||||
class: outputs
|
||||
ts_name: 6 - INJ_2
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 7
|
||||
function: Injector 3 Output
|
||||
id: GPIOD_11
|
||||
class: outputs
|
||||
ts_name: 7 - INJ_3
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 8
|
||||
function: Engine Speed (Tachometer) Signal Output (push-pull)
|
||||
id: GPIOD_14
|
||||
class: outputs
|
||||
ts_name: 8 - OUT_TACH
|
||||
color: green
|
||||
|
||||
- pin: 9
|
||||
function: Fuel Level / CLT Analog Input
|
||||
id: GPIOF_5
|
||||
class: analog_inputs
|
||||
ts_name: 9 - IN_SENS3
|
||||
color: white
|
||||
|
||||
- pin: 10
|
||||
function: Fuel consumption Output (push-pull) / CLT?
|
||||
id: GPIOD_15
|
||||
class: outputs
|
||||
ts_name: 10 - OUT_FUEL
|
||||
color: green
|
||||
|
||||
- pin: 11
|
||||
function: Reserved High-side Output (high)
|
||||
id: GPIOH_13
|
||||
class: outputs
|
||||
ts_name: 11 - OUT_HIGH
|
||||
type: gp_high
|
||||
color: green
|
||||
|
||||
- pin: 12
|
||||
function: Battery Permanent Supply
|
||||
color: black
|
||||
type: 12v
|
||||
|
||||
- pin: 13
|
||||
function: Ignition Switch KL15 / Battery Voltage Analog Input
|
||||
id: EFI_ADC_5
|
||||
class: analog_inputs
|
||||
ts_name: 13 - IN_VIGN
|
||||
color: white
|
||||
|
||||
- pin: 14
|
||||
function: Main Relay Output
|
||||
id: GPIOI_2
|
||||
class: outputs
|
||||
ts_name: 14 - OUT_MAIN
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 15
|
||||
function: Crankshaft Sensor (+) Input
|
||||
id: [GPIOB_1, EFI_ADC_9]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 15 - IN_CRANK (A24)
|
||||
color: white
|
||||
|
||||
- pin: 16
|
||||
function: Throttle Position Sensor (TPS) Analog Input
|
||||
id: EFI_ADC_4
|
||||
class: analog_inputs
|
||||
ts_name: 16 - IN_TPS
|
||||
color: white
|
||||
|
||||
- pin: 17
|
||||
function: TMOT, TPS sensor analog GND
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 18
|
||||
function: Lambda O2-Sensor (O2S) Analog Input
|
||||
id: EFI_ADC_0
|
||||
class: analog_inputs
|
||||
ts_name: 18 - IN_O2S
|
||||
color: white
|
||||
|
||||
- pin: 19
|
||||
function: Knock Sensor (+) Analog Input
|
||||
color: white
|
||||
|
||||
- pin: 20
|
||||
function: Knock Sensor (-)
|
||||
color: black
|
||||
|
||||
- pin: 21
|
||||
function: Ignition 8 Output
|
||||
id: GPIOE_6
|
||||
class: outputs
|
||||
ts_name: 21 - IGN_8
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 22
|
||||
function: Ignition 7 Output
|
||||
id: GPIOB_9
|
||||
class: outputs
|
||||
ts_name: 22 - IGN_7
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 23
|
||||
function: Ignition 6 Output
|
||||
id: GPIOB_8
|
||||
class: outputs
|
||||
ts_name: 23 - IGN_6
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 24
|
||||
function: Ignition 5 Output
|
||||
id: GPIOE_2
|
||||
class: outputs
|
||||
ts_name: 24 - IGN_5
|
||||
type: ign
|
||||
color: red
|
||||
|
||||
- pin: 25
|
||||
function: Injector 6 Output
|
||||
id: GPIOF_12
|
||||
class: outputs
|
||||
ts_name: 25 - INJ_6
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 26
|
||||
function: Solenoid B2 Output (push-pull) / Reserved
|
||||
color: green
|
||||
|
||||
- pin: 27
|
||||
function: Injector 1 Output
|
||||
id: GPIOG_7
|
||||
class: outputs
|
||||
ts_name: 27 - INJ_1
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 28
|
||||
function: Oxygen Sensor 2 Heating Output (low)
|
||||
id: GPIOA_9
|
||||
class: outputs
|
||||
ts_name: 28 - OUT_O2H2
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 29
|
||||
function: Solenoid B1 output / Reserved
|
||||
color: green
|
||||
|
||||
- pin: 30
|
||||
function: Injector 5 Output
|
||||
id: GPIOD_9
|
||||
class: outputs
|
||||
ts_name: 30 - INJ_5
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 31
|
||||
function: CheckEngine Lamp Output (low)
|
||||
id: GPIOG_4
|
||||
class: outputs
|
||||
ts_name: 31 - OUT_CE
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 32
|
||||
function: 5V Analog Supply (TPS)
|
||||
color: black
|
||||
type: 5v
|
||||
|
||||
- pin: 33
|
||||
function: 5V Analog Supply (MAF/MAP Sensor)
|
||||
color: black
|
||||
type: 5v
|
||||
|
||||
- pin: 34
|
||||
function: Crank Sensor (-)
|
||||
color: black
|
||||
|
||||
- pin: 35
|
||||
function: MAP/MAF Sensor Analog Gnd
|
||||
color: black
|
||||
type: gnd
|
||||
|
||||
- pin: 36
|
||||
function: Lambda O2-sensor Gnd
|
||||
color: black
|
||||
type: gnd
|
||||
|
||||
- pin: 37
|
||||
function: Manifold pressure (MAF/MAP1) Analog Input
|
||||
id: EFI_ADC_10
|
||||
class: analog_inputs
|
||||
ts_name: 37 - IN_MAP1
|
||||
color: white
|
||||
|
||||
- pin: 38
|
||||
function: MAP2 Analog Input
|
||||
id: EFI_ADC_11
|
||||
class: analog_inputs
|
||||
ts_name: 38 - IN_MAP2
|
||||
color: white
|
||||
|
||||
- pin: 39
|
||||
function: Engine Coolant Temp. (CLT) Analog Input
|
||||
id: EFI_ADC_12
|
||||
class: analog_inputs
|
||||
ts_name: 39 - IN_CLT
|
||||
color: white
|
||||
|
||||
- pin: 40
|
||||
function: Intake Air Temperature (IAT) Analog Input
|
||||
id: EFI_ADC_13
|
||||
class: analog_inputs
|
||||
ts_name: 40 - IN_IAT
|
||||
color: white
|
||||
|
||||
- pin: 41
|
||||
function: MAP3 Analog Input
|
||||
id: EFI_ADC_2
|
||||
class: analog_inputs
|
||||
ts_name: 41 - IN_MAP3
|
||||
color: white
|
||||
|
||||
- pin: 42
|
||||
function: Reserved input (RES3) / Fuel level / IAT / RRS
|
||||
|
||||
- pin: 43
|
||||
function: Reserved Analog Input (SENS2)
|
||||
|
||||
- pin: 44
|
||||
function: Battery Switched Supply
|
||||
type: 12v
|
||||
|
||||
- pin: 45
|
||||
function: Battery Switched Supply
|
||||
type: 12v
|
||||
|
||||
- pin: 46
|
||||
function: Canister Purge Valve Output (low)
|
||||
id: GPIOG_3
|
||||
class: outputs
|
||||
ts_name: 46 - OUT_CANIST
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 47
|
||||
function: Injector 4 Output
|
||||
id: GPIOD_10
|
||||
class: outputs
|
||||
ts_name: 47 - INJ_4
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 48
|
||||
function: O2 LSF Heating Output (low)
|
||||
id: GPIOH_14
|
||||
class: outputs
|
||||
ts_name: 48 - OUT_O2H
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 49
|
||||
function: Canister heater Output (low)
|
||||
id: GPIOI_1
|
||||
class: outputs
|
||||
ts_name: 49 - OUT_HEATER
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 50
|
||||
function: Starter Relay Output (low) / HOTLamp / Idle2(Mikas)
|
||||
id: GPIOI_0
|
||||
class: outputs
|
||||
ts_name: 50 - OUT_STARTER
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 51
|
||||
function: Power Ground
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 52
|
||||
function: K-Line (Immobiliser) / Solenoid Output A1
|
||||
|
||||
- pin: 53
|
||||
function: Reserved Ground / Fuel Level Ground
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 54
|
||||
function: Solenoid Output A2 / Reserved
|
||||
|
||||
- pin: 55
|
||||
function: Lambda O2-Sensor 2 Analog Input (O2S_2)
|
||||
id: EFI_ADC_1
|
||||
class: analog_inputs
|
||||
ts_name: 55 - IN_O2S2
|
||||
color: white
|
||||
|
||||
- pin: 56
|
||||
function: Reserved input 1 (RES1)
|
||||
|
||||
- pin: 57
|
||||
function: Reserved input 2 (RES2)
|
||||
|
||||
- pin: 58
|
||||
function: Reserved Input (SENS1) / AC (Bosch)
|
||||
|
||||
- pin: 59
|
||||
function: Vehicle Speed Sensor (VSS) digital input
|
||||
id: GPIOF_11
|
||||
class: event_inputs
|
||||
ts_name: 59 - IN_VSS
|
||||
color: white
|
||||
|
||||
- pin: 60
|
||||
function: Reserved Push-Pull Output (push-pull)
|
||||
id: GPIOD_13
|
||||
class: outputs
|
||||
ts_name: 60 - OUT_IO
|
||||
color: green
|
||||
|
||||
- pin: 61
|
||||
function: Power Ground
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 62
|
||||
function: CAN-H (ME7.8.8-compatible)
|
||||
|
||||
- pin: 63
|
||||
function: Battery Switched Supply
|
||||
type: 12v
|
||||
|
||||
- pin: 64
|
||||
function: Solenoid B2 output (push-pull) / Stepper A (or D)
|
||||
id: GPIOC_9
|
||||
class: outputs
|
||||
ts_name: 64 - OUT_COIL_B2
|
||||
color: green
|
||||
|
||||
- pin: 65
|
||||
function: Solenoid B1 output (push-pull) / Stepper D (or C)
|
||||
id: GPIOC_8
|
||||
class: outputs
|
||||
ts_name: 65 - OUT_COIL_B1
|
||||
color: green
|
||||
|
||||
- pin: 66
|
||||
function: Solenoid A2 output (push-pull) / Stepper C (or B)
|
||||
id: GPIOC_7
|
||||
class: outputs
|
||||
ts_name: 66 - OUT_COIL_A2
|
||||
color: green
|
||||
|
||||
- pin: 67
|
||||
function: Solenoid A1 output (push-pull) / Stepper B (or A)
|
||||
id: GPIOC_6
|
||||
class: outputs
|
||||
ts_name: 67 - OUT_COIL_A1
|
||||
color: green
|
||||
|
||||
- pin: 68
|
||||
function: Electric Cooling Fan (ECF) Relay Output (low)
|
||||
id: GPIOD_12
|
||||
class: outputs
|
||||
ts_name: 68 - OUT_ECF
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 69
|
||||
function: A/C Relay Output (low)
|
||||
id: GPIOH_15
|
||||
class: outputs
|
||||
ts_name: 69 - OUT_AC
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 70
|
||||
function: Fuel Pump Relay Output (low)
|
||||
id: GPIOG_2
|
||||
class: outputs
|
||||
ts_name: 70 - OUT_PUMP
|
||||
type: ls
|
||||
color: orange
|
||||
|
||||
- pin: 71
|
||||
function: K-Line
|
||||
|
||||
- pin: 72
|
||||
function: Injector 7 Output
|
||||
id: GPIOF_13
|
||||
class: outputs
|
||||
ts_name: 72 - INJ_7
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 73
|
||||
function: Injector 8 Output
|
||||
id: GPIOF_14
|
||||
class: outputs
|
||||
ts_name: 73 - INJ_8
|
||||
type: inj
|
||||
color: blue
|
||||
|
||||
- pin: 74
|
||||
function: Inertia switch (crash detect) Input
|
||||
id: [GPIOB_0, EFI_ADC_8]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 74 - IN_AUX1
|
||||
color: white
|
||||
|
||||
- pin: 75
|
||||
function: A/C Switch Input
|
||||
id: [GPIOC_4, EFI_ADC_14]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 75 - IN_AUX2
|
||||
color: white
|
||||
|
||||
- pin: 76
|
||||
function: Power Steering Input
|
||||
id: [GPIOC_5, EFI_ADC_15]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 76 - IN_AUX3
|
||||
color: white
|
||||
|
||||
- pin: 77
|
||||
function: Clutch switch Input
|
||||
id: [GPIOA_7, EFI_ADC_7]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 77 - IN_AUX4
|
||||
color: white
|
||||
|
||||
- pin: 78
|
||||
function: Pedal Position Sensor (PPS) Analog Input / GND?
|
||||
id: EFI_ADC_3
|
||||
class: analog_inputs
|
||||
ts_name: 78 - IN_PPS
|
||||
color: white
|
||||
|
||||
- pin: 79
|
||||
function: Cam/Phase Sensor Input
|
||||
id: [GPIOA_6, EFI_ADC_6]
|
||||
class: [event_inputs, analog_inputs]
|
||||
ts_name: 79 - IN_CAM
|
||||
color: white
|
||||
|
||||
- pin: 80
|
||||
function: Power Ground
|
||||
type: gnd
|
||||
color: black
|
||||
|
||||
- pin: 81
|
||||
function: CAN-L (ME7.8.8-compatible)
|
||||
|
||||
info:
|
||||
image:
|
||||
file: main.jpg
|
||||
pins:
|
||||
- pin: 1
|
||||
x: 809
|
||||
y: 808
|
||||
- pin: 2
|
||||
x: 1028
|
||||
y: 808
|
||||
- pin: 3
|
||||
x: 917
|
||||
y: 611
|
||||
- pin: 4
|
||||
x: 797
|
||||
y: 414
|
||||
- pin: 5
|
||||
x: 1025
|
||||
y: 414
|
||||
- pin: 6
|
||||
x: 3234
|
||||
y: 408
|
||||
- pin: 7
|
||||
x: 3129
|
||||
y: 408
|
||||
- pin: 8
|
||||
x: 3024
|
||||
y: 408
|
||||
- pin: 9
|
||||
x: 2920
|
||||
y: 408
|
||||
- pin: 10
|
||||
x: 2815
|
||||
y: 408
|
||||
- pin: 11
|
||||
x: 2710
|
||||
y: 408
|
||||
- pin: 12
|
||||
x: 2605
|
||||
y: 408
|
||||
- pin: 13
|
||||
x: 2500
|
||||
y: 408
|
||||
- pin: 14
|
||||
x: 2395
|
||||
y: 408
|
||||
- pin: 15
|
||||
x: 2291
|
||||
y: 408
|
||||
- pin: 16
|
||||
x: 2186
|
||||
y: 408
|
||||
- pin: 17
|
||||
x: 2081
|
||||
y: 408
|
||||
- pin: 18
|
||||
x: 1976
|
||||
y: 408
|
||||
- pin: 19
|
||||
x: 1871
|
||||
y: 408
|
||||
- pin: 20
|
||||
x: 1766
|
||||
y: 408
|
||||
- pin: 21
|
||||
x: 1662
|
||||
y: 408
|
||||
- pin: 22
|
||||
x: 1557
|
||||
y: 408
|
||||
- pin: 23
|
||||
x: 1452
|
||||
y: 408
|
||||
- pin: 24
|
||||
x: 1347
|
||||
y: 408
|
||||
- pin: 25
|
||||
x: 3234
|
||||
y: 519
|
||||
- pin: 26
|
||||
x: 3129
|
||||
y: 519
|
||||
- pin: 27
|
||||
x: 3024
|
||||
y: 519
|
||||
- pin: 28
|
||||
x: 2920
|
||||
y: 519
|
||||
- pin: 29
|
||||
x: 2815
|
||||
y: 519
|
||||
- pin: 30
|
||||
x: 2710
|
||||
y: 519
|
||||
- pin: 31
|
||||
x: 2605
|
||||
y: 519
|
||||
- pin: 32
|
||||
x: 2500
|
||||
y: 519
|
||||
- pin: 33
|
||||
x: 2395
|
||||
y: 519
|
||||
- pin: 34
|
||||
x: 2291
|
||||
y: 519
|
||||
- pin: 35
|
||||
x: 2186
|
||||
y: 519
|
||||
- pin: 36
|
||||
x: 2081
|
||||
y: 519
|
||||
- pin: 37
|
||||
x: 1976
|
||||
y: 519
|
||||
- pin: 38
|
||||
x: 1871
|
||||
y: 519
|
||||
- pin: 39
|
||||
x: 1766
|
||||
y: 519
|
||||
- pin: 40
|
||||
x: 1662
|
||||
y: 519
|
||||
- pin: 41
|
||||
x: 1557
|
||||
y: 519
|
||||
- pin: 42
|
||||
x: 1452
|
||||
y: 519
|
||||
- pin: 43
|
||||
x: 1347
|
||||
y: 519
|
||||
- pin: 44
|
||||
x: 3234
|
||||
y: 708
|
||||
- pin: 45
|
||||
x: 3129
|
||||
y: 708
|
||||
- pin: 46
|
||||
x: 3024
|
||||
y: 708
|
||||
- pin: 47
|
||||
x: 2920
|
||||
y: 708
|
||||
- pin: 48
|
||||
x: 2815
|
||||
y: 708
|
||||
- pin: 49
|
||||
x: 2710
|
||||
y: 708
|
||||
- pin: 50
|
||||
x: 2605
|
||||
y: 708
|
||||
- pin: 51
|
||||
x: 2500
|
||||
y: 708
|
||||
- pin: 52
|
||||
x: 2395
|
||||
y: 708
|
||||
- pin: 53
|
||||
x: 2291
|
||||
y: 708
|
||||
- pin: 54
|
||||
x: 2186
|
||||
y: 708
|
||||
- pin: 55
|
||||
x: 2081
|
||||
y: 708
|
||||
- pin: 56
|
||||
x: 1976
|
||||
y: 708
|
||||
- pin: 57
|
||||
x: 1871
|
||||
y: 708
|
||||
- pin: 58
|
||||
x: 1766
|
||||
y: 708
|
||||
- pin: 59
|
||||
x: 1662
|
||||
y: 708
|
||||
- pin: 60
|
||||
x: 1557
|
||||
y: 708
|
||||
- pin: 61
|
||||
x: 1452
|
||||
y: 708
|
||||
- pin: 62
|
||||
x: 1347
|
||||
y: 708
|
||||
- pin: 63
|
||||
x: 3234
|
||||
y: 820
|
||||
- pin: 64
|
||||
x: 3129
|
||||
y: 820
|
||||
- pin: 65
|
||||
x: 3024
|
||||
y: 820
|
||||
- pin: 66
|
||||
x: 2920
|
||||
y: 820
|
||||
- pin: 67
|
||||
x: 2815
|
||||
y: 820
|
||||
- pin: 68
|
||||
x: 2710
|
||||
y: 820
|
||||
- pin: 69
|
||||
x: 2605
|
||||
y: 820
|
||||
- pin: 70
|
||||
x: 2500
|
||||
y: 820
|
||||
- pin: 71
|
||||
x: 2395
|
||||
y: 820
|
||||
- pin: 72
|
||||
x: 2291
|
||||
y: 820
|
||||
- pin: 73
|
||||
x: 2186
|
||||
y: 820
|
||||
- pin: 74
|
||||
x: 2081
|
||||
y: 820
|
||||
- pin: 75
|
||||
x: 1976
|
||||
y: 820
|
||||
- pin: 76
|
||||
x: 1871
|
||||
y: 820
|
||||
- pin: 77
|
||||
x: 1766
|
||||
y: 820
|
||||
- pin: 78
|
||||
x: 1662
|
||||
y: 820
|
||||
- pin: 79
|
||||
x: 1557
|
||||
y: 820
|
||||
- pin: 80
|
||||
x: 1452
|
||||
y: 820
|
||||
- pin: 81
|
||||
x: 1347
|
||||
y: 820
|
|
@ -0,0 +1,24 @@
|
|||
#define ts_show_hip9011 false
|
||||
#define ts_show_cj125 false
|
||||
|
||||
//Jokeri says it's better with full pinout just in case
|
||||
//#define ts_show_full_pinout false
|
||||
|
||||
#define ts_show_lcd false
|
||||
#define ts_show_joystick false
|
||||
#define ts_show_egt false
|
||||
#define ts_show_gps false
|
||||
#define ts_show_etb_pins false
|
||||
#define ts_show_analog_divider false
|
||||
#define ts_show_spi true
|
||||
#define ts_show_sd_card true
|
||||
#define ts_show_can_pins false
|
||||
#define ts_show_tunerstudio_port false
|
||||
#define ts_show_can2 false
|
||||
#define ts_show_software_knock false
|
||||
#define ts_show_hardware_simulator false
|
||||
|
||||
#define show_test_presets false
|
||||
#define show_Frankenso_presets false
|
||||
#define show_microRusEFI_presets false
|
||||
#define show_Proteus_presets false
|
|
@ -0,0 +1,7 @@
|
|||
|
||||
https://github.com/rusefi/rusefi/wiki/Hellen81
|
||||
|
||||
https://github.com/andreika-git/hellen81/
|
||||
|
||||
https://rusefi.com/forum/viewtopic.php?f=4&t=1946
|
||||
|
Loading…
Reference in New Issue