rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

this button isn't useful as it just bricks the ECU

This commit is contained in:
Matthew Kennedy 2023-08-27 02:29:21 -04:00 committed by rusefillc
parent 8f0ff58ee7
commit c7a183db49
5 changed files with 0 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
firmware/config/boards/proteus/prepend.txt
View File

@ -22,7 +22,6 @@
#define show_Frankenso_presets false
#define show_microRusEFI_presets false
#define show_Proteus_presets true
#define ts_show_f7_presets true
#define LUA_SCRIPT_SIZE 12000

13
firmware/controllers/bench_test.cpp
View File

@ -400,19 +400,6 @@ static void handleCommandX14(uint16_t index) {
widebandUpdatePending = true;
benchSemaphore.signal();
return;
case 0x14:
#ifdef STM32F7
void sys_dual_bank(void);
/**
* yes, this would instantly cause a hard fault as a random sequence of bytes is decoded as instructions
* and that's the intended behavious - the point is to set flash properly and to re-flash once in proper configuration
*/
sys_dual_bank();
rebootNow();
#else
criticalError("Unexpected dbank command", index);
#endif
return;
case 0x15:
#if EFI_PROD_CODE
extern bool burnWithoutFlash;

27
firmware/hw_layer/ports/stm32/stm32f7/mpu_util.cpp
View File

@ -147,33 +147,6 @@ static void stm32f7_flash_mass_erase_dual_block()
FLASH_CR &= ~(FLASH_CR_MER1 | FLASH_CR_MER2);
}
// todo: at the moment this does not work :(
// https://github.com/rusefi/rusefi/issues/2996
void sys_dual_bank(void) {
uint32_t reg;
efiPrintf("FLASH->SR before %x", FLASH->SR);
/* Unlock OPTCR */
FLASH_OPTKEYR = FLASH_OPTKEY1;
FLASH_OPTKEYR = FLASH_OPTKEY2;
flash_wait_complete();
/* Disable protection + Switch to dual bank */
reg = FLASH_OPTCR;
reg &= ~0x000FF00;
reg |= 0x0000AA00;
reg &= ~(FLASH_OPTCR_nDBANK);
FLASH_OPTCR = reg;
__DSB();
FLASH_OPTCR |= FLASH_OPTCR_STRT;
flash_wait_complete();
efiPrintf("FLASH->SR after %x", FLASH->SR);
/*
* see https://github.com/danielinux/stm32f7-dualbank-tool/issues/1
stm32f7_flash_mass_erase_dual_block();
*/
}
/*
STOP mode for F7 is needed for wakeup from multiple EXTI pins. For example PD0, which is CAN rx.
However, for F40X & F42X this may be useless. STOP in itself eats more current than standby.

5
firmware/rusefi.cpp
View File

@ -183,11 +183,6 @@ void runRusEfi() {
checkLastBootError();
#endif
#ifdef STM32F7
void sys_dual_bank(void);
addConsoleAction("dual_bank", sys_dual_bank);
#endif
#if defined(STM32F4) || defined(STM32F7)
// addConsoleAction("stm32_stop", stm32_stop);
addConsoleAction("stm32_standby", stm32_standby);

2
firmware/tunerstudio/rusefi.input
View File

@ -2115,7 +2115,6 @@ cmd_etb_autotune_stop = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_he
cmd_etb_auto_calibrate_2 = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_hex@@\x00\x11"
cmd_wideband_firmare_update = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_hex@@\x00\x12"
cmd_enable_ext_stim = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_hex@@\x00\x13"
cmd_nDBANK = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_hex@@\x00\x14"@@if_ts_show_f7_presets
cmd_burn_without_flash = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_X14_16_hex@@\x00\x15"
cmd_set_wideband_idx_0 = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_WIDEBAND_16_hex@@\x00\x00"
@ -4282,7 +4281,6 @@ dialog = tcuControls, "Transmission Settings"
commandButton = "Reset ECU", cmd_reset_controller
commandButton = "Reset to DFU", cmd_dfu
commandButton = "Reset to OpenBLT", cmd_openblt
commandButton = "F7 nDBANK fix", cmd_nDBANK@@if_ts_show_f7_presets
commandButton = "No flash Burn mode", cmd_burn_without_flash
; bench test