rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

no way to change bluetooth serial speed on MRE fix #2338

This commit is contained in:
rusefillc 2021-02-12 20:40:50 -05:00
parent ddb54aee40
commit c7a8da8acf
1 changed files with 5 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
firmware/tunerstudio/rusefi.input
View File

@ -2883,13 +2883,12 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
; Board->Connection
dialog = tsPort, "TunerStudio Port"
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed
dialog = tsPort, "Secondary Serial"
field = "Use UART/TTL serial?", useSerialPort
field = "tunerStudioSerialSpeed", tunerStudioSerialSpeed, {useSerialPort == 1}
field = "TX pin", binarySerialTxPin, {useSerialPort == 1}
field = "RX pin", binarySerialRxPin, {useSerialPort == 1}
field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed
dialog = canBus, "CAN Bus"
field = "Can Read Enabled", canReadEnabled
field = "Can Write Enabled", canWriteEnabled
@ -2921,8 +2920,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = auxSerial, "AUX Serial"
field = "RX pin", auxSerialRxPin @@if_ts_show_auxserial_pins
field = "TX pin", auxSerialTxPin @@if_ts_show_auxserial_pins
; we want to show baud rate even if pins are hard-coded like on microRusEFI
field = "Serial Baud Rate", auxSerialSpeed
field = "Serial Baud Rate", auxSerialSpeed @@if_ts_show_auxserial_pins
dialog = sdCard, "SD Card Logger"
field = "Enable SD Card", isSdCardEnabled
@ -2958,6 +2956,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@\x00\x31\x00\x00"
dialog = connection, "", yAxis
field = "ADC vRef voltage", adcVcc
panel = tsPort @@if_ts_show_tunerstudio_port
field = "uartConsoleSerialSpeed", uartConsoleSerialSpeed
panel = auxSerial
panel = gpsReceiver @@if_ts_show_gps