mirror of https://github.com/rusefi/rusefi.git
hellen64 scripts and pinout #2565
This commit is contained in:
rusefillc
parent
a0b4ca9135
commit
ca37f4909f
|
|
@ -0,0 +1,2 @@
|
|||
@echo off
|
||||
bash.exe compile_hellen72.sh
|
||||
|
|
@ -0,0 +1,331 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
|
||||
/*
|
||||
* Setup for STMicroelectronics STM32F4-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_NAME "Hellen72"
|
||||
|
||||
#define EFI_USB_AF 10U
|
||||
#define EFI_USB_SERIAL_DM GPIOA_11
|
||||
#define EFI_USB_SERIAL_DP GPIOA_12
|
||||
|
||||
// Ignore USB VBUS pin (we're never a host, only a device)
|
||||
#define BOARD_OTG_NOVBUSSENS TRUE
|
||||
|
||||
/*
|
||||
* Default to input mode, with internal PULLDOWN resistor enabled.
|
||||
* Pulldowns are more safe because most of MCU outputs on Hellen are high-active.
|
||||
*/
|
||||
#define EFI_PIN_MODE_DEFAULT PIN_MODE_INPUT
|
||||
#define EFI_DR_DEFAULT PIN_PUPDR_PULLDOWN
|
||||
|
||||
// See https://github.com/rusefi/rusefi/issues/397
|
||||
#define DEFAULT_GPIO_SPEED PIN_OSPEED_HIGH
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: LSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768U
|
||||
#endif
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 8000000U
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Board voltages.
|
||||
* Required for performance limits calculation.
|
||||
*/
|
||||
#define STM32_VDD 300U
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_SWDIO 13
|
||||
#define GPIOA_SWCLK 14
|
||||
|
||||
#define GPIOB_SWO 3
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
#define VAL_GPIO_MODER_ALL_DEFAULT (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
EFI_PIN_MODE_DEFAULT(3) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
EFI_PIN_MODE_DEFAULT(11) | \
|
||||
EFI_PIN_MODE_DEFAULT(12) | \
|
||||
EFI_PIN_MODE_DEFAULT(13) | \
|
||||
EFI_PIN_MODE_DEFAULT(14) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
|
||||
#define VAL_GPIO_OTYPER_ALL_DEFAULT (PIN_OTYPE_PUSHPULL(0) | \
|
||||
PIN_OTYPE_PUSHPULL(1) | \
|
||||
PIN_OTYPE_PUSHPULL(2) | \
|
||||
PIN_OTYPE_PUSHPULL(3) | \
|
||||
PIN_OTYPE_PUSHPULL(4) | \
|
||||
PIN_OTYPE_PUSHPULL(5) | \
|
||||
PIN_OTYPE_PUSHPULL(6) | \
|
||||
PIN_OTYPE_PUSHPULL(7) | \
|
||||
PIN_OTYPE_PUSHPULL(8) | \
|
||||
PIN_OTYPE_PUSHPULL(9) | \
|
||||
PIN_OTYPE_PUSHPULL(10) | \
|
||||
PIN_OTYPE_PUSHPULL(11) | \
|
||||
PIN_OTYPE_PUSHPULL(12) | \
|
||||
PIN_OTYPE_PUSHPULL(13) | \
|
||||
PIN_OTYPE_PUSHPULL(14) | \
|
||||
PIN_OTYPE_PUSHPULL(15))
|
||||
|
||||
#define VAL_GPIO_OSPEEDR_ALL_DEFAULT (DEFAULT_GPIO_SPEED(0) | \
|
||||
DEFAULT_GPIO_SPEED(1) | \
|
||||
DEFAULT_GPIO_SPEED(2) | \
|
||||
DEFAULT_GPIO_SPEED(3) | \
|
||||
DEFAULT_GPIO_SPEED(4) | \
|
||||
DEFAULT_GPIO_SPEED(5) | \
|
||||
DEFAULT_GPIO_SPEED(6) | \
|
||||
DEFAULT_GPIO_SPEED(7) | \
|
||||
DEFAULT_GPIO_SPEED(8) | \
|
||||
DEFAULT_GPIO_SPEED(9) | \
|
||||
DEFAULT_GPIO_SPEED(10) | \
|
||||
DEFAULT_GPIO_SPEED(11) | \
|
||||
DEFAULT_GPIO_SPEED(12) | \
|
||||
DEFAULT_GPIO_SPEED(13) | \
|
||||
DEFAULT_GPIO_SPEED(14) | \
|
||||
DEFAULT_GPIO_SPEED(15))
|
||||
|
||||
#define VAL_GPIO_ODR_ALL_DEFAULT 0
|
||||
|
||||
#define VAL_GPIO_PUPDR_ALL_DEFAULT (EFI_DR_DEFAULT(0) | \
|
||||
EFI_DR_DEFAULT(1) | \
|
||||
EFI_DR_DEFAULT(2) | \
|
||||
EFI_DR_DEFAULT(3) | \
|
||||
EFI_DR_DEFAULT(4) | \
|
||||
EFI_DR_DEFAULT(5) | \
|
||||
EFI_DR_DEFAULT(6) | \
|
||||
EFI_DR_DEFAULT(7) | \
|
||||
EFI_DR_DEFAULT(8) | \
|
||||
EFI_DR_DEFAULT(9) | \
|
||||
EFI_DR_DEFAULT(10) | \
|
||||
EFI_DR_DEFAULT(11) | \
|
||||
EFI_DR_DEFAULT(12) | \
|
||||
EFI_DR_DEFAULT(13) | \
|
||||
EFI_DR_DEFAULT(14) | \
|
||||
EFI_DR_DEFAULT(15))
|
||||
|
||||
#define VAL_GPIO_AF_ALL_DEFAULT (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(3, 0U) | \
|
||||
PIN_AFIO_AF(4, 0U) | \
|
||||
PIN_AFIO_AF(5, 0U) | \
|
||||
PIN_AFIO_AF(6, 0U) | \
|
||||
PIN_AFIO_AF(7, 0U))
|
||||
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA11 - OTG_FS_DM (alternate 10).
|
||||
* PA12 - OTG_FS_DP (alternate 10).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
EFI_PIN_MODE_DEFAULT(3) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
PIN_MODE_ALTERNATE(11) | \
|
||||
PIN_MODE_ALTERNATE(12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
#define VAL_GPIOA_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOA_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(3, 0U) | \
|
||||
PIN_AFIO_AF(4, 6U) | \
|
||||
PIN_AFIO_AF(5, 5U) | \
|
||||
PIN_AFIO_AF(6, 5U) | \
|
||||
PIN_AFIO_AF(7, 5U))
|
||||
#define VAL_GPIOA_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* Default except SWO configured on PB3
|
||||
*
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (EFI_PIN_MODE_DEFAULT(0) | \
|
||||
EFI_PIN_MODE_DEFAULT(1) | \
|
||||
EFI_PIN_MODE_DEFAULT(2) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
|
||||
EFI_PIN_MODE_DEFAULT(4) | \
|
||||
EFI_PIN_MODE_DEFAULT(5) | \
|
||||
EFI_PIN_MODE_DEFAULT(6) | \
|
||||
EFI_PIN_MODE_DEFAULT(7) | \
|
||||
EFI_PIN_MODE_DEFAULT(8) | \
|
||||
EFI_PIN_MODE_DEFAULT(9) | \
|
||||
EFI_PIN_MODE_DEFAULT(10) | \
|
||||
EFI_PIN_MODE_DEFAULT(11) | \
|
||||
EFI_PIN_MODE_DEFAULT(12) | \
|
||||
EFI_PIN_MODE_DEFAULT(13) | \
|
||||
EFI_PIN_MODE_DEFAULT(14) | \
|
||||
EFI_PIN_MODE_DEFAULT(15))
|
||||
#define VAL_GPIOB_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOB_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(0, 0U) | \
|
||||
PIN_AFIO_AF(1, 0U) | \
|
||||
PIN_AFIO_AF(2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SWO, 0U) | \
|
||||
PIN_AFIO_AF(4, 0U) | \
|
||||
PIN_AFIO_AF(5, 0U) | \
|
||||
PIN_AFIO_AF(6, 0U) | \
|
||||
PIN_AFIO_AF(7, 0U))
|
||||
#define VAL_GPIOB_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*/
|
||||
#define VAL_GPIOC_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOC_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOC_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOC_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOC_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*/
|
||||
#define VAL_GPIOD_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOD_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOD_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOD_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOD_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*/
|
||||
#define VAL_GPIOE_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOE_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOE_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOE_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOE_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*/
|
||||
#define VAL_GPIOF_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOF_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOF_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOF_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOF_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOG setup:
|
||||
*/
|
||||
#define VAL_GPIOG_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOG_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOG_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOG_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOG_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOH setup:
|
||||
*/
|
||||
#define VAL_GPIOH_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOH_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOH_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOH_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOH_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
/*
|
||||
* GPIOI setup:
|
||||
*/
|
||||
#define VAL_GPIOI_MODER VAL_GPIO_MODER_ALL_DEFAULT
|
||||
#define VAL_GPIOI_OTYPER VAL_GPIO_OTYPER_ALL_DEFAULT
|
||||
#define VAL_GPIOI_OSPEEDR VAL_GPIO_OSPEEDR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_PUPDR VAL_GPIO_PUPDR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_ODR VAL_GPIO_ODR_ALL_DEFAULT
|
||||
#define VAL_GPIOI_AFRL VAL_GPIO_AF_ALL_DEFAULT
|
||||
#define VAL_GPIOI_AFRH VAL_GPIO_AF_ALL_DEFAULT
|
||||
|
||||
#endif /* BOARD_H */
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
# Combine the related files for a specific platform and MCU.
|
||||
|
||||
# Target ECU board design
|
||||
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen72/board_configuration.cpp
|
||||
BOARDINC = $(BOARDS_DIR)/hellen/hellen72
|
||||
|
||||
# Set this if you want a default engine type other than normal Hellen72
|
||||
ifeq ($(DEFAULT_ENGINE_TYPE),)
|
||||
DEFAULT_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=HELLEN_NB2
|
||||
endif
|
||||
|
||||
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
|
||||
LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=GPIOH_8
|
||||
endif
|
||||
|
||||
ifeq ($(LED_COMMUNICATION_BRAIN_PIN),)
|
||||
LED_COMMUNICATION_BRAIN_PIN = -DEFI_COMMUNICATION_PIN=GPIOH_10
|
||||
endif
|
||||
|
||||
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
|
||||
|
||||
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
|
||||
|
||||
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
|
||||
DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY
|
||||
|
||||
# Add them all together
|
||||
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"hellen72\" $(DEFAULT_ENGINE_TYPE) $(LED_CRITICAL_ERROR_BRAIN_PIN) $(LED_COMMUNICATION_BRAIN_PIN)
|
||||
# -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
||||
DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE -DHAL_VSS_USE_PAL=TRUE
|
||||
# todo: is it broken?
|
||||
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
|
||||
|
||||
# We are running on Hellen-One hardware!
|
||||
DDEFS += -DHW_HELLEN=1
|
||||
|
||||
# Shared variables
|
||||
ALLCPPSRC += $(BOARDCPPSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
|
|
@ -0,0 +1,189 @@
|
|||
/**
|
||||
* @file boards/hellen/hellen72/board_configuration.cpp
|
||||
*
|
||||
*
|
||||
* @brief Configuration defaults for the Hellen72 board
|
||||
*
|
||||
* See https://rusefi.com/s/hellen72
|
||||
*
|
||||
* @author andreika <prometheus.pcb@gmail.com>
|
||||
* @author Andrey Belomutskiy, (c) 2012-2020
|
||||
*/
|
||||
|
||||
#include "global.h"
|
||||
#include "engine.h"
|
||||
#include "engine_math.h"
|
||||
#include "allsensors.h"
|
||||
#include "fsio_impl.h"
|
||||
#include "engine_configuration.h"
|
||||
|
||||
EXTERN_ENGINE;
|
||||
|
||||
static void setInjectorPins() {
|
||||
engineConfiguration->injectionPins[0] = GPIOG_7;
|
||||
engineConfiguration->injectionPins[1] = GPIOG_8;
|
||||
engineConfiguration->injectionPins[2] = GPIOD_11;
|
||||
engineConfiguration->injectionPins[3] = GPIOD_10;
|
||||
|
||||
//engineConfiguration->injectionPins[4] = GPIOD_9;
|
||||
//engineConfiguration->injectionPins[5] = GPIOF_12;
|
||||
//engineConfiguration->injectionPins[6] = GPIOF_13;
|
||||
//engineConfiguration->injectionPins[7] = GPIOF_14;
|
||||
|
||||
// Disable remainder
|
||||
for (int i = 4; i < INJECTION_PIN_COUNT;i++) {
|
||||
engineConfiguration->injectionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->injectionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setIgnitionPins() {
|
||||
engineConfiguration->ignitionPins[0] = GPIOI_8; // 3F - IGN_1 (1&4)
|
||||
engineConfiguration->ignitionPins[1] = GPIO_UNASSIGNED ; // GPIOE_4
|
||||
engineConfiguration->ignitionPins[2] = GPIOE_5; // 3I - IGN_2 (2&3)
|
||||
engineConfiguration->ignitionPins[3] = GPIO_UNASSIGNED; // GPIOE_3
|
||||
|
||||
//engineConfiguration->ignitionPins[4] = GPIOE_2;
|
||||
//engineConfiguration->ignitionPins[5] = GPIOI_5;
|
||||
//engineConfiguration->ignitionPins[6] = GPIOI_6;
|
||||
//engineConfiguration->ignitionPins[7] = GPIOI_7;
|
||||
|
||||
// disable remainder
|
||||
for (int i = 4; i < IGNITION_PIN_COUNT; i++) {
|
||||
engineConfiguration->ignitionPins[i] = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
engineConfiguration->ignitionPinMode = OM_DEFAULT;
|
||||
}
|
||||
|
||||
static void setLedPins() {
|
||||
#ifdef EFI_COMMUNICATION_PIN
|
||||
engineConfiguration->communicationLedPin = EFI_COMMUNICATION_PIN;
|
||||
#else
|
||||
engineConfiguration->communicationLedPin = GPIOH_10;
|
||||
#endif /* EFI_COMMUNICATION_PIN */
|
||||
engineConfiguration->runningLedPin = GPIOH_9; // green
|
||||
engineConfiguration->warningLedPin = GPIOH_11; // yellow
|
||||
}
|
||||
|
||||
static void setupVbatt() {
|
||||
// 4.7k high side/4.7k low side = 2.0 ratio divider
|
||||
engineConfiguration->analogInputDividerCoefficient = 2.0f;
|
||||
|
||||
// set vbatt_divider 5.835
|
||||
// 33k / 6.8k
|
||||
engineConfiguration->vbattDividerCoeff = (33 + 6.8) / 6.8; // 5.835
|
||||
|
||||
// pin input +12 from Main Relay
|
||||
engineConfiguration->vbattAdcChannel = EFI_ADC_5; // 4T
|
||||
|
||||
engineConfiguration->adcVcc = 3.29f;
|
||||
}
|
||||
|
||||
static void setupDefaultSensorInputs() {
|
||||
// trigger inputs
|
||||
engineConfiguration->triggerInputPins[0] = GPIOB_1;
|
||||
engineConfiguration->triggerInputPins[1] = GPIO_UNASSIGNED;
|
||||
engineConfiguration->triggerInputPins[2] = GPIO_UNASSIGNED;
|
||||
// Direct hall-only cam input
|
||||
engineConfiguration->camInputs[0] = GPIOA_6;
|
||||
|
||||
engineConfiguration->tps1_1AdcChannel = EFI_ADC_4;
|
||||
engineConfiguration->tps2_1AdcChannel = EFI_ADC_NONE;
|
||||
|
||||
engineConfiguration->mafAdcChannel = EFI_ADC_10;
|
||||
engineConfiguration->map.sensor.hwChannel = EFI_ADC_11;
|
||||
|
||||
engineConfiguration->afr.hwChannel = EFI_ADC_1;
|
||||
|
||||
engineConfiguration->clt.adcChannel = EFI_ADC_12;
|
||||
|
||||
engineConfiguration->iat.adcChannel = EFI_ADC_13;
|
||||
|
||||
engineConfiguration->auxTempSensor1.adcChannel = EFI_ADC_NONE;
|
||||
engineConfiguration->auxTempSensor2.adcChannel = EFI_ADC_NONE;
|
||||
}
|
||||
|
||||
void setBoardConfigOverrides(void) {
|
||||
setLedPins();
|
||||
setupVbatt();
|
||||
setSdCardConfigurationOverrides();
|
||||
|
||||
engineConfiguration->clt.config.bias_resistor = 4700;
|
||||
engineConfiguration->iat.config.bias_resistor = 4700;
|
||||
|
||||
engineConfiguration->canTxPin = GPIOD_1;
|
||||
engineConfiguration->canRxPin = GPIOD_0;
|
||||
}
|
||||
|
||||
void setPinConfigurationOverrides(void) {
|
||||
}
|
||||
|
||||
void setSerialConfigurationOverrides(void) {
|
||||
engineConfiguration->useSerialPort = false;
|
||||
engineConfiguration->binarySerialTxPin = GPIO_UNASSIGNED;
|
||||
engineConfiguration->binarySerialRxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialTxPin = GPIO_UNASSIGNED;
|
||||
// engineConfiguration->consoleSerialRxPin = GPIO_UNASSIGNED;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief Board-specific configuration defaults.
|
||||
*
|
||||
* See also setDefaultEngineConfiguration
|
||||
*
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setBoardDefaultConfiguration(void) {
|
||||
setInjectorPins();
|
||||
setIgnitionPins();
|
||||
|
||||
engineConfiguration->isSdCardEnabled = true;
|
||||
|
||||
CONFIG(enableSoftwareKnock) = true;
|
||||
|
||||
engineConfiguration->canTxPin = GPIOD_1;
|
||||
engineConfiguration->canRxPin = GPIOD_0;
|
||||
|
||||
engineConfiguration->fuelPumpPin = GPIOG_2; // OUT_IO9
|
||||
engineConfiguration->idle.solenoidPin = GPIOD_14; // OUT_PWM5
|
||||
engineConfiguration->fanPin = GPIOD_12; // OUT_PWM8
|
||||
engineConfiguration->mainRelayPin = GPIOI_2; // OUT_LOW3
|
||||
|
||||
// "required" hardware is done - set some reasonable defaults
|
||||
setupDefaultSensorInputs();
|
||||
|
||||
// Some sensible defaults for other options
|
||||
setOperationMode(engineConfiguration, FOUR_STROKE_CRANK_SENSOR);
|
||||
engineConfiguration->trigger.type = TT_TOOTHED_WHEEL_60_2;
|
||||
engineConfiguration->useOnlyRisingEdgeForTrigger = true;
|
||||
setAlgorithm(LM_SPEED_DENSITY PASS_CONFIG_PARAMETER_SUFFIX);
|
||||
|
||||
engineConfiguration->specs.cylindersCount = 4;
|
||||
engineConfiguration->specs.firingOrder = FO_1_3_4_2;
|
||||
|
||||
engineConfiguration->ignitionMode = IM_INDIVIDUAL_COILS; // IM_WASTED_SPARK
|
||||
engineConfiguration->crankingInjectionMode = IM_SIMULTANEOUS;
|
||||
engineConfiguration->injectionMode = IM_SIMULTANEOUS;//IM_BATCH;// IM_SEQUENTIAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Board-specific SD card configuration code overrides. Needed by bootloader code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void setSdCardConfigurationOverrides(void) {
|
||||
engineConfiguration->sdCardSpiDevice = SPI_DEVICE_3;
|
||||
|
||||
engineConfiguration->spi3mosiPin = GPIOC_12;
|
||||
engineConfiguration->spi3misoPin = GPIOC_11;
|
||||
engineConfiguration->spi3sckPin = GPIOC_10;
|
||||
engineConfiguration->sdCardCsPin = GPIOA_15;
|
||||
|
||||
// engineConfiguration->spi2mosiPin = GPIOB_15;
|
||||
// engineConfiguration->spi2misoPin = GPIOB_14;
|
||||
// engineConfiguration->spi2sckPin = GPIOB_13;
|
||||
// engineConfiguration->sdCardCsPin = GPIOB_12;
|
||||
CONFIG(is_enabled_spi_3) = true;
|
||||
}
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#!/bin/bash
|
||||
|
||||
export PROJECT_BOARD=hellen/hellen72
|
||||
export PROJECT_CPU=ARCH_STM32F4
|
||||
export EXTRA_PARAMS="-DSHORT_BOARD_NAME=hellen72"
|
||||
|
||||
cd ..
|
||||
bash ../common_make.sh
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
#define ts_show_hip9011 false
|
||||
#define ts_show_cj125 false
|
||||
|
||||
//Jokeri says it's better with full pinout just in case
|
||||
//#define ts_show_full_pinout false
|
||||
|
||||
#define ts_show_lcd false
|
||||
#define ts_show_joystick false
|
||||
#define ts_show_egt false
|
||||
#define ts_show_gps false
|
||||
#define ts_show_etb_pins false
|
||||
#define ts_show_analog_divider false
|
||||
#define ts_show_spi true
|
||||
#define ts_show_sd_card true
|
||||
#define ts_show_can_pins false
|
||||
#define ts_show_tunerstudio_port false
|
||||
#define ts_show_can2 false
|
||||
#define ts_show_software_knock true
|
||||
#define ts_show_hardware_simulator false
|
||||
|
||||
#define show_test_presets false
|
||||
#define show_Frankenso_presets false
|
||||
#define show_microRusEFI_presets false
|
||||
#define show_Proteus_presets false
|
||||
Loading…
Reference in New Issue