(void) -> () (#3550)

* static functions with (void)

* more

* Revert "more"

This reverts commit 246e53441f.

* s

Co-authored-by: Matthew Kennedy <makenne@microsoft.com>

firmware/bootloader/src/dfu.cpp

@@ -77,7 +77,7 @@ static uint16_t bufToInt16(uint8_t *buf) {
 	return (buf[0] << 8) | buf[1];
 }
 
-static void prepareInterruptsForJump(void) {
+static void prepareInterruptsForJump() {
 #ifdef STM32F4
 	// interrupt control
 	SCB->ICSR &= ~SCB_ICSR_PENDSVSET_Msk;
@@ -112,7 +112,7 @@ void dfuJumpToApp(uint32_t addr) {
     chSysHalt("dfuJumpToApp FAIL");
 }
 
-static void dfuHandleGetList(void) {
+static void dfuHandleGetList() {
 	static const uint8_t cmdsInfo[] = { DFU_VERSION_NUMBER, DFU_GET_LIST_CMD, DFU_DEVICE_ID_CMD, DFU_READ_CMD, DFU_GO_CMD, 
 		DFU_WRITE_CMD, DFU_ERASE_CMD };
 	size_t numBytes = sizeof(cmdsInfo);
@@ -122,7 +122,7 @@ static void dfuHandleGetList(void) {
 	sendByte(DFU_ACK_BYTE);						
 }
 
-static void dfuHandleDeviceId(void) {
+static void dfuHandleDeviceId() {
 	uint32_t mcuRev = getMcuRevision();
 	sendByte(0x01); // the number of bytes to be send - 1
     // send 12 bit MCU revision
@@ -131,7 +131,7 @@ static void dfuHandleDeviceId(void) {
 	sendByte(DFU_ACK_BYTE);
 }
 
-static void dfuHandleGo(void) {
+static void dfuHandleGo() {
 	uint32_t addr;
 	
 	if (!readAddress(&addr)) {
@@ -143,7 +143,7 @@ static void dfuHandleGo(void) {
 	dfuJumpToApp(addr);
 }
 
-static void dfuHandleRead(void) {
+static void dfuHandleRead() {
 	uint32_t addr;
 
 	if (!readAddress(&addr)) {
@@ -174,7 +174,7 @@ static void dfuHandleRead(void) {
 	blTsChannel.write(buffer, numBytes, true);
 }
 
-static void dfuHandleWrite(void) {
+static void dfuHandleWrite() {
 	uint32_t addr;
 
 	if (!readAddress(&addr)) {
@@ -206,7 +206,7 @@ static void dfuHandleWrite(void) {
 	sendByte(DFU_ACK_BYTE);
 }
 
-static void dfuHandleErase(void) {
+static void dfuHandleErase() {
 	int numSectors;
 	if (!getByte(buffer))
     	return;

firmware/config/boards/subaru_eg33/board_configuration.cpp

@@ -331,7 +331,7 @@ static const struct mc33810_config mc33810_even = {
 	.en = {.port = nullptr, .pad = 0}
 };
 
-static void board_init_ext_gpios(void)
+static void board_init_ext_gpios()
 {
 	int ret;
 

firmware/console/binary/tunerstudio.cpp

@@ -98,7 +98,7 @@ persistent_config_s configWorkingCopy;
 
 #endif /* EFI_NO_CONFIG_WORKING_COPY */
 
-static void printErrorCounters(void) {
+static void printErrorCounters() {
 	efiPrintf("TunerStudio size=%d / total=%d / errors=%d / H=%d / O=%d / P=%d / B=%d",
 			sizeof(tsOutputChannels), tsState.totalCounter, tsState.errorCounter, tsState.queryCommandCounter,
 			tsState.outputChannelsCommandCounter, tsState.readPageCommandsCounter, tsState.burnCommandCounter);
@@ -115,7 +115,7 @@ extern persistent_config_container_s persistentState;
 
 static efitimems_t previousWriteReportMs = 0;
 
-static void resetTs(void) {
+static void resetTs() {
 	memset(&tsState, 0, sizeof(tsState));
 }
 

firmware/console/eficonsole.cpp

@@ -28,15 +28,15 @@
 #include "console_io.h"
 #include "svnversion.h"
 
-static void testCritical(void) {
+static void testCritical() {
 	chDbgCheck(0);
 }
 
-static void myerror(void) {
+static void myerror() {
 	firmwareError(CUSTOM_ERR_TEST_ERROR, "firmwareError: %d", getRusEfiVersion());
 }
 
-static void sayHello(void) {
+static void sayHello() {
 	efiPrintf(PROTOCOL_HELLO_PREFIX " rusEFI LLC (c) 2012-2021. All rights reserved.");
 	efiPrintf(PROTOCOL_HELLO_PREFIX " rusEFI v%d@%s", getRusEfiVersion(), VCS_VERSION);
 	efiPrintf(PROTOCOL_HELLO_PREFIX " Chibios Kernel:       %s", CH_KERNEL_VERSION);
@@ -156,7 +156,7 @@ int CountFreeStackSpace(const void* wabase) {
 /**
  * This methods prints all threads, their stack usage, and their total times
  */
-static void cmd_threads(void) {
+static void cmd_threads() {
 #if CH_DBG_THREADS_PROFILING && CH_DBG_FILL_THREADS
 
 	thread_t* tp = chRegFirstThread();

firmware/console/status_loop.cpp

@@ -311,7 +311,7 @@ static void showFuelInfo2(float rpm, float engineLoad) {
 }
 
 #if EFI_ENGINE_CONTROL
-static void showFuelInfo(void) {
+static void showFuelInfo() {
 	showFuelInfo2((float) GET_RPM(), getFuelingLoad(PASS_ENGINE_PARAMETER_SIGNATURE));
 }
 #endif
@@ -319,7 +319,7 @@ static void showFuelInfo(void) {
 static OutputPin *leds[] = { &enginePins.warningLedPin, &enginePins.runningLedPin,
 		&enginePins.errorLedPin, &enginePins.communicationLedPin, &enginePins.checkEnginePin };
 
-static void initStatusLeds(void) {
+static void initStatusLeds() {
 	enginePins.communicationLedPin.initPin("led: comm status", engineConfiguration->communicationLedPin, &LED_COMMUNICATION_BRAIN_PIN_MODE, true);
 	// checkEnginePin is already initialized by the time we get here
 

firmware/controllers/actuators/alternator_controller.cpp

@@ -27,7 +27,7 @@ static percent_t currentAltDuty;
 static bool currentPlainOnOffState = false;
 static bool shouldResetPid = false;
 
-static void pidReset(void) {
+static void pidReset() {
 	alternatorPid.reset();
 }
 

firmware/controllers/actuators/electronic_throttle.cpp

@@ -678,7 +678,7 @@ static EtbThread etbThread CCM_OPTIONAL;
 
 #endif
 
-static void showEthInfo(void) {
+static void showEthInfo() {
 #if EFI_PROD_CODE
 	efiPrintf("etbAutoTune=%d",
 			engine->etbAutoTune);

firmware/controllers/core/fsio_impl.cpp

@@ -252,7 +252,7 @@ static void showFsio(const char *msg, LEElement *element) {
 }
 
 // todo: move somewhere else
-static void showFsioInfo(void) {
+static void showFsioInfo() {
 #if EFI_PROD_CODE || EFI_SIMULATOR
 	showFsio("fuel", fuelPumpLogic);
 

firmware/controllers/engine_controller.cpp

@@ -181,7 +181,7 @@ efitimesec_t getTimeNowSeconds(void) {
 	return getTimeNowUs() / US_PER_SECOND;
 }
 
-static void resetAccel(void) {
+static void resetAccel() {
 	engine->tpsAccelEnrichment.resetAE();
 
 	for (size_t i = 0; i < efi::size(engine->injectionEvents.elements); i++)
@@ -291,7 +291,7 @@ static void printAnalogChannelInfo(const char *name, adc_channel_e hwChannel) {
 #endif /* HAL_USE_ADC */
 }
 
-static void printAnalogInfo(void) {
+static void printAnalogInfo() {
 	efiPrintf("analogInputDividerCoefficient: %.2f", engineConfiguration->analogInputDividerCoefficient);
 
 	printAnalogChannelInfo("hip9011", engineConfiguration->hipOutputChannel);
@@ -470,7 +470,7 @@ static void setFloat(const char *offsetStr, const char *valueStr) {
 	onConfigurationChanged();
 }
 
-static void initConfigActions(void) {
+static void initConfigActions() {
 	addConsoleActionSS("set_float", (VoidCharPtrCharPtr) setFloat);
 	addConsoleActionII("set_int", (VoidIntInt) setInt);
 	addConsoleActionII("set_short", (VoidIntInt) setShort);

firmware/controllers/engine_cycle/map_averaging.cpp

@@ -293,7 +293,7 @@ void mapAveragingTriggerCallback(
 #endif
 }
 
-static void showMapStats(void) {
+static void showMapStats() {
 	efiPrintf("per revolution %d", measurementsPerRevolution);
 }
 

firmware/controllers/flash_main.cpp

@@ -211,7 +211,7 @@ static bool isValidCrc(persistent_config_container_s *state) {
 	return isValidCrc_b;
 }
 
-static void doResetConfiguration(void) {
+static void doResetConfiguration() {
 	resetConfigurationExt(engineConfiguration->engineType PASS_ENGINE_PARAMETER_SUFFIX);
 }
 
@@ -325,7 +325,7 @@ void readFromFlash() {
 	}
 }
 
-static void rewriteConfig(void) {
+static void rewriteConfig() {
 	doResetConfiguration();
 	writeToFlashNow();
 }

firmware/controllers/gauges/lcd_controller.cpp

@@ -243,7 +243,7 @@ static void showLine(lcd_line_e line, int /*screenY*/) {
 	}
 }
 
-static void fillWithSpaces(void) {
+static void fillWithSpaces() {
 	int column = getCurrentHD44780column();
 	for (int r = column; r < 20; r++) {
 		lcd_HD44780_print_char(' ');

firmware/controllers/gauges/malfunction_indicator.cpp

@@ -106,7 +106,7 @@ private:
 static MILController instance CCM_OPTIONAL;
 
 #if TEST_MIL_CODE
-static void testMil(void) {
+static void testMil() {
 	addError(OBD_Engine_Coolant_Temperature_Circuit_Malfunction);
 	addError(OBD_Intake_Air_Temperature_Circuit_Malfunction);
 }

firmware/controllers/sensors/map.cpp

@@ -169,7 +169,7 @@ static void applyConfiguration(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
 
 extern int mapMinBufferLength;
 
-static void printMAPInfo(void) {
+static void printMAPInfo() {
 #if EFI_ANALOG_SENSORS
 	efiPrintf("instant value=%.2fkPa", Sensor::getOrZero(SensorType::Map));
 

firmware/controllers/settings.cpp

@@ -245,7 +245,7 @@ void printTPSInfo(void) {
 	printTpsSenser("TPS2", SensorType::Tps2, engineConfiguration->tps2Min, engineConfiguration->tps2Max, engineConfiguration->tps2_1AdcChannel);
 }
 
-static void printTemperatureInfo(void) {
+static void printTemperatureInfo() {
 #if EFI_ANALOG_SENSORS
 	Sensor::showAllSensorInfo();
 
@@ -338,15 +338,15 @@ static void setIgnitionMode(int value) {
 	doPrintConfiguration();
 }
 
-static void setOneCoilIgnition(void) {
+static void setOneCoilIgnition() {
 	setIgnitionMode((int)IM_ONE_COIL);
 }
 
-static void setWastedIgnition(void) {
+static void setWastedIgnition() {
 	setIgnitionMode((int)IM_WASTED_SPARK);
 }
 
-static void setIndividualCoilsIgnition(void) {
+static void setIndividualCoilsIgnition() {
 	setIgnitionMode((int)IM_INDIVIDUAL_COILS);
 }
 
@@ -861,7 +861,7 @@ void scheduleStopEngine(void) {
 	doScheduleStopEngine(PASS_ENGINE_PARAMETER_SIGNATURE);
 }
 
-static void printAllInfo(void) {
+static void printAllInfo() {
 	printTemperatureInfo();
 	printTPSInfo();
 #if EFI_ENGINE_SNIFFER

firmware/controllers/trigger/trigger_central.cpp

@@ -666,7 +666,7 @@ void TriggerCentral::handleShaftSignal(trigger_event_e signal, efitick_t timesta
 	}
 }
 
-static void triggerShapeInfo(void) {
+static void triggerShapeInfo() {
 #if EFI_PROD_CODE || EFI_SIMULATOR
 	TriggerWaveform *shape = &engine->triggerCentral.triggerShape;
 	TriggerFormDetails *triggerFormDetails = &engine->triggerCentral.triggerFormDetails;

firmware/development/engine_sniffer.cpp

@@ -60,7 +60,7 @@ static uint32_t skipUntilEngineCycle = 0;
 
 #if ! EFI_UNIT_TEST
 extern WaveChart waveChart;
-static void resetNow(void) {
+static void resetNow() {
 	skipUntilEngineCycle = getRevolutionCounter() + 3;
 	waveChart.reset();
 }
@@ -109,7 +109,7 @@ int WaveChart::getSize() {
 }
 
 #if ! EFI_UNIT_TEST
-static void printStatus(void) {
+static void printStatus() {
 	efiPrintf("engine chart: %s", boolToString(engineConfiguration->isEngineChartEnabled));
 	efiPrintf("engine chart size=%d", engineConfiguration->engineChartSize);
 }

firmware/development/rfi_perftest.cpp

@@ -262,7 +262,7 @@ static int rtcStartTime;
 
 #include "chrtclib.h"
 
-static void timeInfo(void) {
+static void timeInfo() {
 	efiPrintf("chTimeNow as seconds = %d", getTimeNowSeconds());
 	efiPrintf("hal seconds = %d", halTime.get() / (long)CORE_CLOCK);
 
@@ -272,7 +272,7 @@ static void timeInfo(void) {
 #endif
 }
 
-static void runChibioTest(void) {
+static void runChibioTest() {
 	print("EFI_SHAFT_POSITION_INPUT=%d\r\n", EFI_SHAFT_POSITION_INPUT);
 	print("EFI_EMULATE_POSITION_SENSORS=%d\r\n", EFI_EMULATE_POSITION_SENSORS);
 	print("EFI_ANALOG_SENSORS=%d\r\n", EFI_ANALOG_SENSORS);

firmware/hw_layer/adc/adc_inputs.cpp

@@ -432,7 +432,7 @@ void removeChannel(const char *name, adc_channel_e setting) {
 // Weak link a stub so that every board doesn't have to implement this function
 __attribute__((weak)) void setAdcChannelOverrides() { }
 
-static void configureInputs(void) {
+static void configureInputs() {
 	memset(adcHwChannelEnabled, 0, sizeof(adcHwChannelEnabled));
 
 	/**

firmware/hw_layer/drivers/can/can_hw.cpp

@@ -162,7 +162,7 @@ private:
 static CanRead canRead CCM_OPTIONAL;
 static CanWrite canWrite CCM_OPTIONAL;
 
-static void canInfo(void) {
+static void canInfo() {
 	if (!isCanEnabled) {
 		efiPrintf("CAN is not enabled, please enable & restart");
 		return;

firmware/hw_layer/drivers/lcd/HD44780.cpp

@@ -68,7 +68,7 @@ static void lcdSleep(int period) {
 //static char txbuf[1];
 #define LCD_PORT_EXP_ADDR 0x20
 
-static bool lcd_HD44780_is_enabled(void) {
+static bool lcd_HD44780_is_enabled() {
 	/* check for valid LCD setting */
 	return ((engineConfiguration->displayMode == DM_HD44780) &&
 		(isBrainPinValid(CONFIG(HD44780_rs))) &&

firmware/hw_layer/drivers/serial/serial_hw.cpp

@@ -22,7 +22,7 @@ static bool isSerialRXEnabled = false;
 static SerialConfig uartCfg;
 static SerialRead serialRead;
 
-static void auxInfo(void) {
+static void auxInfo() {
 	if (!isSerialEnabled) {
 		efiPrintf("AUX Serial is not enabled, please enable & restart");
 		return;

firmware/hw_layer/hardware.cpp

@@ -198,7 +198,7 @@ void onFastAdcComplete(adcsample_t*) {
 }
 #endif /* HAL_USE_ADC */
 
-static void calcFastAdcIndexes(void) {
+static void calcFastAdcIndexes() {
 #if HAL_USE_ADC
 	fastMapSampleIndex = enableFastAdcChannel("Fast MAP", engineConfiguration->map.sensor.hwChannel);
 	hipSampleIndex = enableFastAdcChannel("HIP9011", engineConfiguration->hipOutputChannel);

firmware/hw_layer/mmc_card.cpp

@@ -89,7 +89,7 @@ static NO_CACHE FATFS MMC_FS;
 
 static int fatFsErrors = 0;
 
-static void mmcUnMount(void);
+static void mmcUnMount();
 
 static void setSdCardReady(bool value) {
 	fs_ready = value;
@@ -112,7 +112,7 @@ static FIL FDLogFile NO_CACHE;
 static int logFileIndex = MIN_FILE_INDEX;
 static char logName[_MAX_FILLER + 20];
 
-static void printMmcPinout(void) {
+static void printMmcPinout() {
 	efiPrintf("MMC CS %s", hwPortname(CONFIG(sdCardCsPin)));
 	// todo: we need to figure out the right SPI pinout, not just SPI2
 //	efiPrintf("MMC SCK %s:%d", portname(EFI_SPI2_SCK_PORT), EFI_SPI2_SCK_PIN);
@@ -120,7 +120,7 @@ static void printMmcPinout(void) {
 //	efiPrintf("MMC MOSI %s:%d", portname(EFI_SPI2_MOSI_PORT), EFI_SPI2_MOSI_PIN);
 }
 
-static void sdStatistics(void) {
+static void sdStatistics() {
 	printMmcPinout();
 	efiPrintf("SD enabled=%s status=%s", boolToString(CONFIG(isSdCardEnabled)),
 			sdStatus);
@@ -130,7 +130,7 @@ static void sdStatistics(void) {
 	}
 }
 
-static void incLogFileName(void) {
+static void incLogFileName() {
 	memset(&FDLogFile, 0, sizeof(FIL));						// clear the memory
 	FRESULT err = f_open(&FDLogFile, LOG_INDEX_FILENAME, FA_READ);				// This file has the index for next log file name
 
@@ -164,7 +164,7 @@ static void incLogFileName(void) {
 	efiPrintf("Done %d", logFileIndex);
 }
 
-static void prepareLogFileName(void) {
+static void prepareLogFileName() {
 	strcpy(logName, RUSEFI_LOG_PREFIX);
 	char *ptr;
 
@@ -190,7 +190,7 @@ static void prepareLogFileName(void) {
  * This function saves the name of the file in a global variable
  * so that we can later append to that file
  */
-static void createLogFile(void) {
+static void createLogFile() {
 	memset(&FDLogFile, 0, sizeof(FIL));						// clear the memory
 	prepareLogFileName();
 
@@ -282,7 +282,7 @@ static void listDirectory(const char *path) {
 /*
  * MMC card un-mount.
  */
-static void mmcUnMount(void) {
+static void mmcUnMount() {
 	if (!isSdCardAlive()) {
 		efiPrintf("Error: No File system is mounted. \"mountsd\" first");
 		return;

firmware/hw_layer/pin_repository.cpp

@@ -120,7 +120,7 @@ static brain_pin_e index_to_brainPin(unsigned int i)
 	return GPIO_INVALID;
 }
 
-static void reportPins(void) {
+static void reportPins() {
 	for (unsigned int i = 0; i < getBrainPinOnchipNum(); i++) {
 		const char *pin_user = getBrainUsedPin(i);
 

firmware/hw_layer/ports/cypress/backup_ram.cpp

@@ -20,7 +20,7 @@ static bool wasLoaded = false;
 static const int backupStateOffset = 0, backupDataOffset = 1;
 const size_t backupSize = (BACKUP_RAM_NUM + 1) * sizeof(uint32_t);
 
-static void backupInit(void) {
+static void backupInit() {
 	static_assert(backupSize <= BACKUP_FLASH_SIZE, "Backup flash overflow");
 
 	// first, load the whole buffer into the memory

firmware/hw_layer/ports/stm32/stm32f7/mpu_util.cpp

@@ -134,12 +134,12 @@ uintptr_t getFlashAddrSecondCopy() {
 #define FLASH_OPTKEY1                         (0x08192A3B)
 #define FLASH_OPTKEY2                         (0x4C5D6E7F)
 
-static void flash_wait_complete(void)
+static void flash_wait_complete()
 {
 	do { __DSB(); } while (FLASH->SR & FLASH_SR_BSY);
 }
 
-static void stm32f7_flash_mass_erase_dual_block(void)
+static void stm32f7_flash_mass_erase_dual_block()
 {
     FLASH_CR |= FLASH_CR_MER1 | FLASH_CR_MER2;
     FLASH_CR |= FLASH_CR_STRT;

firmware/hw_layer/rtc_helper.cpp

@@ -47,7 +47,7 @@ extern "C" int _gettimeofday(timeval* tv, void* tzvp) {
 #endif
 
 #if EFI_RTC
-static time_t GetTimeUnixSec(void) {
+static time_t GetTimeUnixSec() {
   struct tm tim;
 
   rtcGetTime(&RTCD1, &timespec);

firmware/hw_layer/sensors/cj125.cpp

@@ -501,7 +501,7 @@ static bool cj125periodic(CJ125 *instance DECLARE_ENGINE_PARAMETER_SUFFIX) {
 
 #if ! EFI_UNIT_TEST
 
-static msg_t cjThread(void)
+static msg_t cjThread()
 {
 	chRegSetThreadName("cj125");
 
@@ -516,7 +516,7 @@ static msg_t cjThread(void)
 	return -1;
 }
 
-static bool cjCheckConfig(void) {
+static bool cjCheckConfig() {
 	if (!CONFIG(isCJ125Enabled)) {
 		efiPrintf("cj125 is disabled. Failed!");
 		return false;

firmware/hw_layer/sensors/hip9011.cpp

@@ -114,7 +114,7 @@ static SPIConfig hipSpiCfg = {
 /*==========================================================================*/
 
 #if EFI_HIP_9011_DEBUG
-	static void hip_addconsoleActions(void);
+	static void hip_addconsoleActions();
 #endif
 
 /*==========================================================================*/
@@ -203,7 +203,7 @@ int Hip9011Hardware::sendSyncCommand(uint8_t tx, uint8_t *rx_ptr) {
 	return ret;
 }
 
-static int hip_wake_driver(void)
+static int hip_wake_driver()
 {
     /* Entering a reentrant critical zone.*/
     syssts_t sts = chSysGetStatusAndLockX();
@@ -328,7 +328,7 @@ void hipAdcCallback(adcsample_t adcValue) {
 	}
 }
 
-static int hip_testAdvMode(void) {
+static int hip_testAdvMode() {
 	int ret;
 	uint8_t ret0, ret1, ret2;
 
@@ -362,7 +362,7 @@ static int hip_testAdvMode(void) {
 	return -1;
 }
 
-static int hip_init(void) {
+static int hip_init() {
 	int ret;
 
 	ret = instance.hw->sendSyncCommand(SET_PRESCALER_CMD(instance.prescaler), NULL);
@@ -582,7 +582,7 @@ static const char *hip_state_names[] =
 	"Waiting for second ADC sample"
 };
 
-static void showHipInfo(void) {
+static void showHipInfo() {
 	if (!CONFIG(isHip9011Enabled)) {
 		efiPrintf("hip9011 driver not active");
 		return;
@@ -670,7 +670,7 @@ static void setHipGain(float value) {
 	showHipInfo();
 }
 
-static void hip_addconsoleActions(void) {
+static void hip_addconsoleActions() {
 	addConsoleAction("hipinfo", showHipInfo);
 	addConsoleActionF("set_gain", setHipGain);
 	addConsoleActionF("set_band", setHipBand);

firmware/hw_layer/sensors/joystick.cpp

@@ -73,7 +73,7 @@ static void extCallback(ioportmask_t channel) {
 #endif
 }
 
-static void joystickInfo(void) {
+static void joystickInfo() {
 	efiPrintf("total %d center=%d@%s", joyTotal, joyCenter,
 			hwPortname(CONFIG(joystickCenterPin)));
 	efiPrintf("a=%d@%s", joyA, hwPortname(CONFIG(joystickAPin)));

firmware/hw_layer/sensors/max31855.cpp

@@ -29,7 +29,7 @@ static SPIDriver *driver;
 
 static SPIConfig spiConfig[EGT_CHANNEL_COUNT];
 
-static void showEgtInfo(void) {
+static void showEgtInfo() {
 #if EFI_PROD_CODE
 	printSpiState(engineConfiguration);
 
@@ -111,7 +111,7 @@ uint16_t getEgtValue(int egtChannel) {
 	}
 }
 
-static void egtRead(void) {
+static void egtRead() {
 
 	if (driver == NULL) {
 		efiPrintf("No SPI selected for EGT");

firmware/rusefi.cpp

@@ -138,7 +138,7 @@ static char panicMessage[200];
 static virtual_timer_t resetTimer;
 
 // todo: move this into a hw-specific file
-void rebootNow(void) {
+void rebootNow() {
 	NVIC_SystemReset();
 }
 
@@ -146,7 +146,7 @@ void rebootNow(void) {
  * Some configuration changes require full firmware reset.
  * Once day we will write graceful shutdown, but that would be one day.
  */
-static void scheduleReboot(void) {
+static void scheduleReboot() {
 	efiPrintf("Rebooting in 3 seconds...");
 	chibios_rt::CriticalSectionLocker csl;
 	chVTSetI(&resetTimer, TIME_MS2I(3000), (vtfunc_t) rebootNow, NULL);
@@ -162,7 +162,7 @@ void onAssertionFailure() {
 void runRusEfiWithConfig();
 void runMainLoop();
 
-void runRusEfi(void) {
+void runRusEfi() {
 	efiAssertVoid(CUSTOM_RM_STACK_1, getCurrentRemainingStack() > 512, "init s");
 	assertEngineReference();
 	engine->setConfig();

firmware/rusefi.h

@@ -7,6 +7,5 @@
 
 #pragma once
 
-void runRusEfi(void);
-void rebootNow(void);
-
+void runRusEfi();
+void rebootNow();

firmware/util/math/interpolation.cpp

@@ -22,7 +22,7 @@
 
 float array16[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 };
 
-static void testBinary(void) {
+static void testBinary() {
 	const int size16 = 16;
 
 	uint32_t totalOld = 0;

unit_tests/tests/trigger/test_trigger_decoder.cpp

@@ -55,7 +55,7 @@ TEST(misc, testSkipped2_0) {
 	ASSERT_EQ( 0,  GET_RPM()) << "testNoStartUpWarnings RPM";
 }
 
-static void testDodgeNeonDecoder(void) {
+static void testDodgeNeonDecoder() {
 	printf("*************************************************** testDodgeNeonDecoder95\r\n");
 
 	ASSERT_EQ( 8,  getTriggerZeroEventIndex(DODGE_NEON_1995)) << "DODGE_NEON_1995: trigger zero index";