Auto-generated configs and docs

2023-05-10 23:54:32 +00:00 · 2023-05-10 23:54:32 +00:00 · cfe5022360
parent 126092fe02
commit cfe5022360
87 changed files with 294 additions and 252 deletions
--- a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri May 05 21:37:57 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:32 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2402,6 +2402,7 @@ struct engine_configuration_s {
 	offset 1312 bit 26 */
 	bool boardUseD5PullDown : 1 {};
 	/**
+	 * Are you a developer troubleshooting TS over CAN ISO/TP?
 	offset 1312 bit 27 */
 	bool verboseIsoTp : 1 {};
 	/**
@ -5183,4 +5184,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23176);

 // end
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri May 05 21:37:57 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:32 UTC 2023
--- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
@ -1079,7 +1079,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 1532601554
+#define SIGNATURE_HASH 3078978212
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
 #define spi_device_e_SPI_DEVICE_2 2
@ -1370,7 +1370,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI master.2023.05.10.cypress.1532601554"
+#define TS_SIGNATURE "rusEFI master.2023.05.11.cypress.3078978212"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri May 05 21:37:56 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:30 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2402,6 +2402,7 @@ struct engine_configuration_s {
 	offset 1312 bit 26 */
 	bool boardUseD5PullDown : 1 {};
 	/**
+	 * Are you a developer troubleshooting TS over CAN ISO/TP?
 	offset 1312 bit 27 */
 	bool verboseIsoTp : 1 {};
 	/**
@ -5183,4 +5184,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23176);

 // end
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri May 05 21:37:56 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:30 UTC 2023
--- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
@ -1079,7 +1079,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 864945694
+#define SIGNATURE_HASH 3746748520
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
 #define spi_device_e_SPI_DEVICE_2 2
@ -1370,7 +1370,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI master.2023.05.10.kin.864945694"
+#define TS_SIGNATURE "rusEFI master.2023.05.11.kin.3746748520"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri May 05 21:37:58 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed May 10 23:53:33 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2402,6 +2402,7 @@ struct engine_configuration_s {
 	offset 1312 bit 26 */
 	bool boardUseD5PullDown : 1 {};
 	/**
+	 * Are you a developer troubleshooting TS over CAN ISO/TP?
 	offset 1312 bit 27 */
 	bool verboseIsoTp : 1 {};
 	/**
@ -5183,4 +5184,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23176);

 // end
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri May 05 21:37:58 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed May 10 23:53:33 UTC 2023
--- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
@ -1030,7 +1030,7 @@
 #define show_Frankenso_presets false
 #define show_Proteus_presets false
 #define show_test_presets false
-#define SIGNATURE_HASH 1544689158
+#define SIGNATURE_HASH 2966341744
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
 #define spi_device_e_SPI_DEVICE_2 2
@ -1322,7 +1322,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI master.2023.05.10.subaru_eg33_f7.1544689158"
+#define TS_SIGNATURE "rusEFI master.2023.05.11.subaru_eg33_f7.2966341744"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/controllers/generated/engine_configuration_generated_structures.h
+++ b/firmware/controllers/generated/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri May 05 21:38:47 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:30 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2402,6 +2402,7 @@ struct engine_configuration_s {
 	offset 1312 bit 26 */
 	bool boardUseD5PullDown : 1 {};
 	/**
+	 * Are you a developer troubleshooting TS over CAN ISO/TP?
 	offset 1312 bit 27 */
 	bool verboseIsoTp : 1 {};
 	/**
@ -5183,4 +5184,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23176);

 // end
-// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri May 05 21:38:47 UTC 2023
+// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:30 UTC 2023
--- a/firmware/controllers/generated/rusefi_generated.h
+++ b/firmware/controllers/generated/rusefi_generated.h
@ -1079,7 +1079,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 857127540
+#define SIGNATURE_HASH 3754583042
 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
 #define spi_device_e_SPI_DEVICE_1 1
 #define spi_device_e_SPI_DEVICE_2 2
@ -1370,7 +1370,7 @@
 #define ts_show_vbatt true
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
-#define TS_SIGNATURE "rusEFI master.2023.05.10.f407-discovery.857127540"
+#define TS_SIGNATURE "rusEFI master.2023.05.11.f407-discovery.3754583042"
 #define TS_SINGLE_WRITE_COMMAND 'W'
 #define TS_SINGLE_WRITE_COMMAND_char W
 #define TS_TEST_COMMAND 't'
--- a/firmware/controllers/generated/signature_48way.h
+++ b/firmware/controllers/generated/signature_48way.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1909376137
-#define TS_SIGNATURE "rusEFI master.2023.05.10.48way.1909376137"
+#define SIGNATURE_HASH 2635209471
+#define TS_SIGNATURE "rusEFI master.2023.05.11.48way.2635209471"
--- a/firmware/controllers/generated/signature_alphax-2chan.h
+++ b/firmware/controllers/generated/signature_alphax-2chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3465965697
-#define TS_SIGNATURE "rusEFI master.2023.05.10.alphax-2chan.3465965697"
+#define SIGNATURE_HASH 575319799
+#define TS_SIGNATURE "rusEFI master.2023.05.11.alphax-2chan.575319799"
--- a/firmware/controllers/generated/signature_alphax-4chan.h
+++ b/firmware/controllers/generated/signature_alphax-4chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3082904914
-#define TS_SIGNATURE "rusEFI master.2023.05.10.alphax-4chan.3082904914"
+#define SIGNATURE_HASH 1528675108
+#define TS_SIGNATURE "rusEFI master.2023.05.11.alphax-4chan.1528675108"
--- a/firmware/controllers/generated/signature_alphax-8chan.h
+++ b/firmware/controllers/generated/signature_alphax-8chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 593539793
-#define TS_SIGNATURE "rusEFI master.2023.05.10.alphax-8chan.593539793"
+#define SIGNATURE_HASH 3485232295
+#define TS_SIGNATURE "rusEFI master.2023.05.11.alphax-8chan.3485232295"
--- a/firmware/controllers/generated/signature_atlas.h
+++ b/firmware/controllers/generated/signature_atlas.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1200837109
-#define TS_SIGNATURE "rusEFI master.2023.05.10.atlas.1200837109"
+#define SIGNATURE_HASH 2874118019
+#define TS_SIGNATURE "rusEFI master.2023.05.11.atlas.2874118019"
--- a/firmware/controllers/generated/signature_core8.h
+++ b/firmware/controllers/generated/signature_core8.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 221462917
-#define TS_SIGNATURE "rusEFI master.2023.05.10.core8.221462917"
+#define SIGNATURE_HASH 3790577651
+#define TS_SIGNATURE "rusEFI master.2023.05.11.core8.3790577651"
--- a/firmware/controllers/generated/signature_cypress.h
+++ b/firmware/controllers/generated/signature_cypress.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH 1532601554
-#define TS_SIGNATURE "rusEFI master.2023.05.10.cypress.1532601554"
+#define SIGNATURE_HASH 3078978212
+#define TS_SIGNATURE "rusEFI master.2023.05.11.cypress.3078978212"
--- a/firmware/controllers/generated/signature_f407-discovery.h
+++ b/firmware/controllers/generated/signature_f407-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 857127540
-#define TS_SIGNATURE "rusEFI master.2023.05.10.f407-discovery.857127540"
+#define SIGNATURE_HASH 3754583042
+#define TS_SIGNATURE "rusEFI master.2023.05.11.f407-discovery.3754583042"
--- a/firmware/controllers/generated/signature_f429-discovery.h
+++ b/firmware/controllers/generated/signature_f429-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1532601554
-#define TS_SIGNATURE "rusEFI master.2023.05.10.f429-discovery.1532601554"
+#define SIGNATURE_HASH 3078978212
+#define TS_SIGNATURE "rusEFI master.2023.05.11.f429-discovery.3078978212"
--- a/firmware/controllers/generated/signature_frankenso_na6.h
+++ b/firmware/controllers/generated/signature_frankenso_na6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2030781464
-#define TS_SIGNATURE "rusEFI master.2023.05.10.frankenso_na6.2030781464"
+#define SIGNATURE_HASH 2513934958
+#define TS_SIGNATURE "rusEFI master.2023.05.11.frankenso_na6.2513934958"
--- a/firmware/controllers/generated/signature_harley81.h
+++ b/firmware/controllers/generated/signature_harley81.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 256097486
-#define TS_SIGNATURE "rusEFI master.2023.05.10.harley81.256097486"
+#define SIGNATURE_HASH 3818873528
+#define TS_SIGNATURE "rusEFI master.2023.05.11.harley81.3818873528"
--- a/firmware/controllers/generated/signature_hellen-gm-e67.h
+++ b/firmware/controllers/generated/signature_hellen-gm-e67.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2464758043
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen-gm-e67.2464758043"
+#define SIGNATURE_HASH 2117461869
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen-gm-e67.2117461869"
--- a/firmware/controllers/generated/signature_hellen-honda-k.h
+++ b/firmware/controllers/generated/signature_hellen-honda-k.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2602936679
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen-honda-k.2602936679"
+#define SIGNATURE_HASH 2012837649
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen-honda-k.2012837649"
--- a/firmware/controllers/generated/signature_hellen-nb1.h
+++ b/firmware/controllers/generated/signature_hellen-nb1.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2374668921
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen-nb1.2374668921"
+#define SIGNATURE_HASH 1633045519
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen-nb1.1633045519"
--- a/firmware/controllers/generated/signature_hellen121nissan.h
+++ b/firmware/controllers/generated/signature_hellen121nissan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2635658748
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen121nissan.2635658748"
+#define SIGNATURE_HASH 1908681610
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen121nissan.1908681610"
--- a/firmware/controllers/generated/signature_hellen121vag.h
+++ b/firmware/controllers/generated/signature_hellen121vag.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2168721959
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen121vag.2168721959"
+#define SIGNATURE_HASH 1838730321
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen121vag.1838730321"
--- a/firmware/controllers/generated/signature_hellen128.h
+++ b/firmware/controllers/generated/signature_hellen128.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 4171427412
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen128.4171427412"
+#define SIGNATURE_HASH 343814178
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen128.343814178"
--- a/firmware/controllers/generated/signature_hellen154hyundai.h
+++ b/firmware/controllers/generated/signature_hellen154hyundai.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2354855114
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen154hyundai.2354855114"
+#define SIGNATURE_HASH 1619059388
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen154hyundai.1619059388"
--- a/firmware/controllers/generated/signature_hellen72.h
+++ b/firmware/controllers/generated/signature_hellen72.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1139362981
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen72.1139362981"
+#define SIGNATURE_HASH 2939523795
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen72.2939523795"
--- a/firmware/controllers/generated/signature_hellen81.h
+++ b/firmware/controllers/generated/signature_hellen81.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1577301564
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen81.1577301564"
+#define SIGNATURE_HASH 3000985674
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen81.3000985674"
--- a/firmware/controllers/generated/signature_hellen88bmw.h
+++ b/firmware/controllers/generated/signature_hellen88bmw.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3500608507
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellen88bmw.3500608507"
+#define SIGNATURE_HASH 1014748557
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellen88bmw.1014748557"
--- a/firmware/controllers/generated/signature_hellenNA6.h
+++ b/firmware/controllers/generated/signature_hellenNA6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3189417835
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellenNA6.3189417835"
+#define SIGNATURE_HASH 1388738845
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellenNA6.1388738845"
--- a/firmware/controllers/generated/signature_hellenNA8_96.h
+++ b/firmware/controllers/generated/signature_hellenNA8_96.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3519967679
-#define TS_SIGNATURE "rusEFI master.2023.05.10.hellenNA8_96.3519967679"
+#define SIGNATURE_HASH 1024634825
+#define TS_SIGNATURE "rusEFI master.2023.05.11.hellenNA8_96.1024634825"
--- a/firmware/controllers/generated/signature_kin.h
+++ b/firmware/controllers/generated/signature_kin.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH 864945694
-#define TS_SIGNATURE "rusEFI master.2023.05.10.kin.864945694"
+#define SIGNATURE_HASH 3746748520
+#define TS_SIGNATURE "rusEFI master.2023.05.11.kin.3746748520"
--- a/firmware/controllers/generated/signature_m74_9.h
+++ b/firmware/controllers/generated/signature_m74_9.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2228713961
-#define TS_SIGNATURE "rusEFI master.2023.05.10.m74_9.2228713961"
+#define SIGNATURE_HASH 1745594271
+#define TS_SIGNATURE "rusEFI master.2023.05.11.m74_9.1745594271"
--- a/firmware/controllers/generated/signature_mre_f4.h
+++ b/firmware/controllers/generated/signature_mre_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3601790898
-#define TS_SIGNATURE "rusEFI master.2023.05.10.mre_f4.3601790898"
+#define SIGNATURE_HASH 980560324
+#define TS_SIGNATURE "rusEFI master.2023.05.11.mre_f4.980560324"
--- a/firmware/controllers/generated/signature_mre_f7.h
+++ b/firmware/controllers/generated/signature_mre_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3601790898
-#define TS_SIGNATURE "rusEFI master.2023.05.10.mre_f7.3601790898"
+#define SIGNATURE_HASH 980560324
+#define TS_SIGNATURE "rusEFI master.2023.05.11.mre_f7.980560324"
--- a/firmware/controllers/generated/signature_nucleo_f429.h
+++ b/firmware/controllers/generated/signature_nucleo_f429.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1532601554
-#define TS_SIGNATURE "rusEFI master.2023.05.10.nucleo_f429.1532601554"
+#define SIGNATURE_HASH 3078978212
+#define TS_SIGNATURE "rusEFI master.2023.05.11.nucleo_f429.3078978212"
--- a/firmware/controllers/generated/signature_nucleo_f767.h
+++ b/firmware/controllers/generated/signature_nucleo_f767.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1532601554
-#define TS_SIGNATURE "rusEFI master.2023.05.10.nucleo_f767.1532601554"
+#define SIGNATURE_HASH 3078978212
+#define TS_SIGNATURE "rusEFI master.2023.05.11.nucleo_f767.3078978212"
--- a/firmware/controllers/generated/signature_nucleo_h743.h
+++ b/firmware/controllers/generated/signature_nucleo_h743.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1532601554
-#define TS_SIGNATURE "rusEFI master.2023.05.10.nucleo_h743.1532601554"
+#define SIGNATURE_HASH 3078978212
+#define TS_SIGNATURE "rusEFI master.2023.05.11.nucleo_h743.3078978212"
--- a/firmware/controllers/generated/signature_prometheus_405.h
+++ b/firmware/controllers/generated/signature_prometheus_405.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1808623938
-#define TS_SIGNATURE "rusEFI master.2023.05.10.prometheus_405.1808623938"
+#define SIGNATURE_HASH 2266085172
+#define TS_SIGNATURE "rusEFI master.2023.05.11.prometheus_405.2266085172"
--- a/firmware/controllers/generated/signature_prometheus_469.h
+++ b/firmware/controllers/generated/signature_prometheus_469.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1808623938
-#define TS_SIGNATURE "rusEFI master.2023.05.10.prometheus_469.1808623938"
+#define SIGNATURE_HASH 2266085172
+#define TS_SIGNATURE "rusEFI master.2023.05.11.prometheus_469.2266085172"
--- a/firmware/controllers/generated/signature_proteus_f4.h
+++ b/firmware/controllers/generated/signature_proteus_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1768029663
-#define TS_SIGNATURE "rusEFI master.2023.05.10.proteus_f4.1768029663"
+#define SIGNATURE_HASH 2243765161
+#define TS_SIGNATURE "rusEFI master.2023.05.11.proteus_f4.2243765161"
--- a/firmware/controllers/generated/signature_proteus_f7.h
+++ b/firmware/controllers/generated/signature_proteus_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1768029663
-#define TS_SIGNATURE "rusEFI master.2023.05.10.proteus_f7.1768029663"
+#define SIGNATURE_HASH 2243765161
+#define TS_SIGNATURE "rusEFI master.2023.05.11.proteus_f7.2243765161"
--- a/firmware/controllers/generated/signature_proteus_h7.h
+++ b/firmware/controllers/generated/signature_proteus_h7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1768029663
-#define TS_SIGNATURE "rusEFI master.2023.05.10.proteus_h7.1768029663"
+#define SIGNATURE_HASH 2243765161
+#define TS_SIGNATURE "rusEFI master.2023.05.11.proteus_h7.2243765161"
--- a/firmware/controllers/generated/signature_s105.h
+++ b/firmware/controllers/generated/signature_s105.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1670730091
-#define TS_SIGNATURE "rusEFI master.2023.05.10.s105.1670730091"
+#define SIGNATURE_HASH 2403962653
+#define TS_SIGNATURE "rusEFI master.2023.05.11.s105.2403962653"
--- a/firmware/controllers/generated/signature_subaru_eg33_f7.h
+++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1544689158
-#define TS_SIGNATURE "rusEFI master.2023.05.10.subaru_eg33_f7.1544689158"
+#define SIGNATURE_HASH 2966341744
+#define TS_SIGNATURE "rusEFI master.2023.05.11.subaru_eg33_f7.2966341744"
--- a/firmware/controllers/generated/signature_tdg-pdm8.h
+++ b/firmware/controllers/generated/signature_tdg-pdm8.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3522660592
-#define TS_SIGNATURE "rusEFI master.2023.05.10.tdg-pdm8.3522660592"
+#define SIGNATURE_HASH 1026250374
+#define TS_SIGNATURE "rusEFI master.2023.05.11.tdg-pdm8.1026250374"
--- a/firmware/controllers/lua/generated/value_lookup_generated.md
+++ b/firmware/controllers/lua/generated/value_lookup_generated.md
@ -749,7 +749,7 @@ This is the Cut Mode normally used


 ### verboseIsoTp
-
+Are you a developer troubleshooting TS over CAN ISO/TP?

 ### engineSnifferFocusOnInputs

--- a/firmware/tunerstudio/generated/rusefi.ini
+++ b/firmware/tunerstudio/generated/rusefi.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.f407-discovery.857127540"
+	signature	= "rusEFI master.2023.05.11.f407-discovery.3754583042"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.f407-discovery.857127540" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.f407-discovery.3754583042" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:30 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:27 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7501,7 +7502,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8180,6 +8180,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_48way.ini
+++ b/firmware/tunerstudio/generated/rusefi_48way.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.48way.1909376137"
+	signature	= "rusEFI master.2023.05.11.48way.2635209471"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.48way.1909376137" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.48way.2635209471" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:11 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:03 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8175,6 +8175,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.alphax-2chan.3465965697"
+	signature	= "rusEFI master.2023.05.11.alphax-2chan.575319799"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.alphax-2chan.3465965697" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.alphax-2chan.575319799" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:47 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:34 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7479,7 +7480,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8145,6 +8145,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.alphax-4chan.3082904914"
+	signature	= "rusEFI master.2023.05.11.alphax-4chan.1528675108"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.alphax-4chan.3082904914" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.alphax-4chan.1528675108" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:48 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:36 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8149,6 +8149,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.alphax-8chan.593539793"
+	signature	= "rusEFI master.2023.05.11.alphax-8chan.3485232295"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.alphax-8chan.593539793" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.alphax-8chan.3485232295" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:49 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:38 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8150,6 +8150,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_atlas.ini
+++ b/firmware/tunerstudio/generated/rusefi_atlas.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.atlas.1200837109"
+	signature	= "rusEFI master.2023.05.11.atlas.2874118019"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.atlas.1200837109" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.atlas.2874118019" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:28 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:24 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7491,7 +7492,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8169,6 +8169,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_core8.ini
+++ b/firmware/tunerstudio/generated/rusefi_core8.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.core8.221462917"
+	signature	= "rusEFI master.2023.05.11.core8.3790577651"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.core8.221462917" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.core8.3790577651" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:10 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:02 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8175,6 +8175,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_cypress.ini
+++ b/firmware/tunerstudio/generated/rusefi_cypress.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.cypress.1532601554"
+	signature	= "rusEFI master.2023.05.11.cypress.3078978212"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.cypress.1532601554" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.cypress.3078978212" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed May 10 01:26:45 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:32 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.f407-discovery.857127540"
+	signature	= "rusEFI master.2023.05.11.f407-discovery.3754583042"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.f407-discovery.857127540" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.f407-discovery.3754583042" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:22 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:17 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7501,7 +7502,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8180,6 +8180,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.f429-discovery.1532601554"
+	signature	= "rusEFI master.2023.05.11.f429-discovery.3078978212"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.f429-discovery.1532601554" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.f429-discovery.3078978212" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:23 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:19 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
+++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.frankenso_na6.2030781464"
+	signature	= "rusEFI master.2023.05.11.frankenso_na6.2513934958"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.frankenso_na6.2030781464" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.frankenso_na6.2513934958" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:15 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:08 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_harley81.ini
+++ b/firmware/tunerstudio/generated/rusefi_harley81.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.harley81.256097486"
+	signature	= "rusEFI master.2023.05.11.harley81.3818873528"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.harley81.256097486" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.harley81.3818873528" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:50 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:39 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7480,7 +7481,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8147,6 +8147,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen-gm-e67.2464758043"
+	signature	= "rusEFI master.2023.05.11.hellen-gm-e67.2117461869"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen-gm-e67.2464758043" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen-gm-e67.2117461869" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:04 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:54 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8147,6 +8147,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen-honda-k.2602936679"
+	signature	= "rusEFI master.2023.05.11.hellen-honda-k.2012837649"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen-honda-k.2602936679" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen-honda-k.2012837649" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:55 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:45 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7481,7 +7482,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8144,6 +8144,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen-nb1.2374668921"
+	signature	= "rusEFI master.2023.05.11.hellen-nb1.1633045519"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen-nb1.2374668921" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen-nb1.1633045519" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:03 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:53 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8148,6 +8148,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen121nissan.2635658748"
+	signature	= "rusEFI master.2023.05.11.hellen121nissan.1908681610"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen121nissan.2635658748" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen121nissan.1908681610" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:54 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:44 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7480,7 +7481,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8146,6 +8146,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen121vag.2168721959"
+	signature	= "rusEFI master.2023.05.11.hellen121vag.1838730321"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen121vag.2168721959" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen121vag.1838730321" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:53 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:42 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8151,6 +8151,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen128.4171427412"
+	signature	= "rusEFI master.2023.05.11.hellen128.343814178"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen128.4171427412" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen128.343814178" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:52 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:41 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7480,7 +7481,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8146,6 +8146,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen154hyundai.2354855114"
+	signature	= "rusEFI master.2023.05.11.hellen154hyundai.1619059388"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen154hyundai.2354855114" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen154hyundai.1619059388" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:57 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:47 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7480,7 +7481,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8145,6 +8145,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen72.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen72.1139362981"
+	signature	= "rusEFI master.2023.05.11.hellen72.2939523795"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen72.1139362981" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen72.2939523795" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:00 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:50 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8148,6 +8148,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen81.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen81.1577301564"
+	signature	= "rusEFI master.2023.05.11.hellen81.3000985674"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen81.1577301564" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen81.3000985674" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:01 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:51 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7481,7 +7482,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8144,6 +8144,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellen88bmw.3500608507"
+	signature	= "rusEFI master.2023.05.11.hellen88bmw.1014748557"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellen88bmw.3500608507" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellen88bmw.1014748557" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:26:59 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:48 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7479,7 +7480,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8142,6 +8142,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellenNA6.3189417835"
+	signature	= "rusEFI master.2023.05.11.hellenNA6.1388738845"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellenNA6.3189417835" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellenNA6.1388738845" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:05 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:56 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8149,6 +8149,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.hellenNA8_96.3519967679"
+	signature	= "rusEFI master.2023.05.11.hellenNA8_96.1024634825"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.hellenNA8_96.3519967679" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.hellenNA8_96.1024634825" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:06 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:57 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8147,6 +8147,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_kin.ini
+++ b/firmware/tunerstudio/generated/rusefi_kin.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.kin.864945694"
+	signature	= "rusEFI master.2023.05.11.kin.3746748520"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.kin.864945694" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.kin.3746748520" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed May 10 01:26:44 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed May 10 23:53:30 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7500,7 +7501,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8179,6 +8179,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_m74_9.ini
+++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.m74_9.2228713961"
+	signature	= "rusEFI master.2023.05.11.m74_9.1745594271"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.m74_9.2228713961" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.m74_9.1745594271" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:12 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:05 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8149,6 +8149,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.mre_f4.3601790898"
+	signature	= "rusEFI master.2023.05.11.mre_f4.980560324"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.mre_f4.3601790898" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.mre_f4.980560324" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:09 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:00 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7482,7 +7483,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8151,6 +8151,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.mre_f7.3601790898"
+	signature	= "rusEFI master.2023.05.11.mre_f7.980560324"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.mre_f7.3601790898" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.mre_f7.980560324" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:07 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:53:59 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7482,7 +7483,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8151,6 +8151,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.nucleo_f429.1532601554"
+	signature	= "rusEFI master.2023.05.11.nucleo_f429.3078978212"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.nucleo_f429.1532601554" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.nucleo_f429.3078978212" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:24 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:20 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.nucleo_f767.1532601554"
+	signature	= "rusEFI master.2023.05.11.nucleo_f767.3078978212"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.nucleo_f767.1532601554" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.nucleo_f767.3078978212" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:26 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:21 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.nucleo_h743.1532601554"
+	signature	= "rusEFI master.2023.05.11.nucleo_h743.3078978212"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.nucleo_h743.1532601554" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.nucleo_h743.3078978212" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:27 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:23 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.prometheus_405.1808623938"
+	signature	= "rusEFI master.2023.05.11.prometheus_405.2266085172"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.prometheus_405.1808623938" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.prometheus_405.2266085172" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:17 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:11 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7494,7 +7495,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8173,6 +8173,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.prometheus_469.1808623938"
+	signature	= "rusEFI master.2023.05.11.prometheus_469.2266085172"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.prometheus_469.1808623938" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.prometheus_469.2266085172" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:16 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:09 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7494,7 +7495,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8173,6 +8173,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.proteus_f4.1768029663"
+	signature	= "rusEFI master.2023.05.11.proteus_f4.2243765161"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.proteus_f4.1768029663" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.proteus_f4.2243765161" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:20 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:14 UTC 2023

 pageSize            = 27176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 27166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7486,7 +7487,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8162,6 +8162,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.proteus_f7.1768029663"
+	signature	= "rusEFI master.2023.05.11.proteus_f7.2243765161"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.proteus_f7.1768029663" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.proteus_f7.2243765161" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:18 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:12 UTC 2023

 pageSize            = 27176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 27166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7486,7 +7487,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8162,6 +8162,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.proteus_h7.1768029663"
+	signature	= "rusEFI master.2023.05.11.proteus_h7.2243765161"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.proteus_h7.1768029663" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.proteus_h7.2243765161" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:21 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:16 UTC 2023

 pageSize            = 27176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 27166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7486,7 +7487,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8162,6 +8162,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_s105.ini
+++ b/firmware/tunerstudio/generated/rusefi_s105.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.s105.1670730091"
+	signature	= "rusEFI master.2023.05.11.s105.2403962653"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.s105.1670730091" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.s105.2403962653" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:13 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:06 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7483,7 +7484,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8149,6 +8149,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.subaru_eg33_f7.1544689158"
+	signature	= "rusEFI master.2023.05.11.subaru_eg33_f7.2966341744"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.subaru_eg33_f7.1544689158" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.subaru_eg33_f7.2966341744" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed May 10 01:26:46 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed May 10 23:53:33 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7496,7 +7497,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8167,6 +8167,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
+++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.05.10.tdg-pdm8.3522660592"
+	signature	= "rusEFI master.2023.05.11.tdg-pdm8.1026250374"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.05.10.tdg-pdm8.3522660592" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.05.11.tdg-pdm8.1026250374" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -87,7 +87,7 @@ enable2ndByteCanID = false
 	;  name					= scalar, type, offset,			units,	scale, translate,	lo,		hi, digits

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:29 UTC 2023
+; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:26 UTC 2023

 pageSize            = 23176
 page = 1
@ -1734,6 +1734,7 @@ boostClosedLoopBlends2_blendValues = array, U08, 23166, [8], "%", 0.5, 0, 0, 100
 	invertSecondaryTriggerSignal = "https://wiki.rusefi.com/Trigger-Configuration-Guide\nThis setting flips the signal from the secondary engine speed sensor."
 	cutSparkOnHardLimit = "Be careful enabling this: some engines are known to self-disassemble their valvetrain with a spark cut. Fuel cut is much safer."
 	launchSparkCutEnable = "This is the Cut Mode normally used"
+	verboseIsoTp = "Are you a developer troubleshooting TS over CAN ISO/TP?"
 	skippedWheelOnCam = "Where is your primary skipped wheel located?"
 	acSwitch = "A/C button input"
 	etbNeutralPosition = "Expected neutral position"
@ -7499,7 +7500,6 @@ dialog = sent_stateDialog, "sent_state"
 		field = "CAN dash type",						canNbcType
 		field = "inertia measurement unit",				imuType
 		field = "Enable rusEFI CAN broadcast",			enableVerboseCanTx
-		field = verboseIsoTp,									verboseIsoTp
 		field = "rusEFI CAN data bus",	canBroadcastUseChannelTwo
 		field = "rusEFI CAN data base address",			verboseCanBaseAddress
 		field = "rusEFI CAN data address type",			rusefiVerbose29b
@ -8178,6 +8178,7 @@ dialog = tcuControls, "Transmission Settings"
 		field = "vvtBooleanForVerySpecialCases",		vvtBooleanForVerySpecialCases
 		field = tempBooleanForVerySpecialLogic,			tempBooleanForVerySpecialLogic
 		field = "Global fuel correction",				globalFuelCorrection
+		field = "TS over CAN debug",					verboseIsoTp
 		field = "MAP Averaging Logic @",				mapAveragingSchedulingAtIndex
 		field = "showHumanReadableWarning (affects Burn)",	showHumanReadableWarning
 		field = "Warning Message",							warning_message
--- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
+++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
@ -1,6 +1,6 @@
 package com.rusefi.config.generated;

-// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 01:27:32 UTC 2023
+// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed May 10 23:54:30 UTC 2023

 // by class com.rusefi.output.FileJavaFieldsConsumer
 import com.rusefi.config.*;
@ -1021,7 +1021,6 @@ public class Fields {
 	public static final int SentEtbType_FORD_TYPE_1 = 2;
 	public static final int SentEtbType_GM_TYPE_1 = 1;
 	public static final int SentEtbType_NONE = 0;
-	public static final int SIGNATURE_HASH = 857127540;
 	public static final int spi_device_e_SPI_DEVICE_1 = 1;
 	public static final int spi_device_e_SPI_DEVICE_2 = 2;
 	public static final int spi_device_e_SPI_DEVICE_3 = 3;
@ -1245,7 +1244,7 @@ public class Fields {
 	public static final int TS_RESPONSE_UNDERRUN = 0x80;
 	public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
 	public static final char TS_SET_LOGGER_SWITCH = 'l';
-	public static final String TS_SIGNATURE = "rusEFI master.2023.05.10.f407-discovery.857127540";
+	public static final String TS_SIGNATURE = "rusEFI master.2023.05.11.f407-discovery.3754583042";
 	public static final char TS_SINGLE_WRITE_COMMAND = 'W';
 	public static final char TS_TEST_COMMAND = 't';
 	public static final int TS_TOTAL_OUTPUT_SIZE = 1372;