Auto-generated configs and docs

This commit is contained in:
GitHub gen-configs Action 2023-09-17 13:52:54 +00:00
parent 2c6467061f
commit d15eaaf0fa
99 changed files with 381 additions and 288 deletions

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:41 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:38 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -827,6 +827,7 @@ struct engine_configuration_s {
/**
* We calculate knock band based of cylinderBore
* Use this to override - kHz knock band override
* Requires power cycling to effect
kHz
* offset 360
*/
@ -5310,4 +5311,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23468);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:41 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:38 UTC 2023

View File

@ -794,7 +794,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 2480651631
#define SIGNATURE_HASH 1534823825
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1086,7 +1086,7 @@
#define ts_show_vbatt true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI master.2023.09.16.cypress.2480651631"
#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.1534823825"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:40 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:37 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -827,6 +827,7 @@ struct engine_configuration_s {
/**
* We calculate knock band based of cylinderBore
* Use this to override - kHz knock band override
* Requires power cycling to effect
kHz
* offset 360
*/
@ -5310,4 +5311,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23468);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:40 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:37 UTC 2023

View File

@ -794,7 +794,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 4211875747
#define SIGNATURE_HASH 866922333
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1086,7 +1086,7 @@
#define ts_show_vbatt true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI master.2023.09.16.kin.4211875747"
#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.866922333"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:42 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:39 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -827,6 +827,7 @@ struct engine_configuration_s {
/**
* We calculate knock band based of cylinderBore
* Use this to override - kHz knock band override
* Requires power cycling to effect
kHz
* offset 360
*/
@ -5310,4 +5311,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23468);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:29:42 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:39 UTC 2023

View File

@ -1032,7 +1032,7 @@
#define show_Frankenso_presets false
#define show_Proteus_presets false
#define show_test_presets false
#define SIGNATURE_HASH 2488695416
#define SIGNATURE_HASH 1559644806
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1324,7 +1324,7 @@
#define ts_show_vbatt true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI master.2023.09.16.subaru_eg33_f7.2488695416"
#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.1559644806"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:31:23 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -827,6 +827,7 @@ struct engine_configuration_s {
/**
* We calculate knock band based of cylinderBore
* Use this to override - kHz knock band override
* Requires power cycling to effect
kHz
* offset 360
*/
@ -5310,4 +5311,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23468);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 10 01:31:23 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023

View File

@ -1085,7 +1085,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 818098004
#define SIGNATURE_HASH 4167245738
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1377,7 +1377,7 @@
#define ts_show_vbatt true
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define TS_SIGNATURE "rusEFI master.2023.09.16.f407-discovery.818098004"
#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.4167245738"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3607180757
#define TS_SIGNATURE "rusEFI master.2023.09.16.48way.3607180757"
#define SIGNATURE_HASH 530646315
#define TS_SIGNATURE "rusEFI master.2023.09.17.48way.530646315"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 877857277
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-2chan.877857277"
#define SIGNATURE_HASH 4243798275
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-2chan.4243798275"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4085539330
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-4chan.4085539330"
#define SIGNATURE_HASH 992236284
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan.992236284"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4085539330
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-4chan_f7.4085539330"
#define SIGNATURE_HASH 992236284
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-4chan_f7.992236284"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2720555884
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-8chan-revA.2720555884"
#define SIGNATURE_HASH 1787319186
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan-revA.1787319186"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2659697383
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-8chan.2659697383"
#define SIGNATURE_HASH 1445458457
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan.1445458457"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2659697383
#define TS_SIGNATURE "rusEFI master.2023.09.16.alphax-8chan_f7.2659697383"
#define SIGNATURE_HASH 1445458457
#define TS_SIGNATURE "rusEFI master.2023.09.17.alphax-8chan_f7.1445458457"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2400274504
#define TS_SIGNATURE "rusEFI master.2023.09.16.atlas.2400274504"
#define SIGNATURE_HASH 1202813110
#define TS_SIGNATURE "rusEFI master.2023.09.17.atlas.1202813110"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2885464281
#define TS_SIGNATURE "rusEFI master.2023.09.16.core8.2885464281"
#define SIGNATURE_HASH 1667006503
#define TS_SIGNATURE "rusEFI master.2023.09.17.core8.1667006503"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.cypress.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.cypress.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 818098004
#define TS_SIGNATURE "rusEFI master.2023.09.16.f407-discovery.818098004"
#define SIGNATURE_HASH 4167245738
#define TS_SIGNATURE "rusEFI master.2023.09.17.f407-discovery.4167245738"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.f429-discovery.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.f429-discovery.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2978569637
#define TS_SIGNATURE "rusEFI master.2023.09.16.frankenso_na6.2978569637"
#define SIGNATURE_HASH 2032758107
#define TS_SIGNATURE "rusEFI master.2023.09.17.frankenso_na6.2032758107"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1343360309
#define TS_SIGNATURE "rusEFI master.2023.09.16.harley81.1343360309"
#define SIGNATURE_HASH 2561818059
#define TS_SIGNATURE "rusEFI master.2023.09.17.harley81.2561818059"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3161557581
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen-112-17.3161557581"
#define SIGNATURE_HASH 1959901875
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-112-17.1959901875"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 589892511
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen-gm-e67.589892511"
#define SIGNATURE_HASH 3951639393
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-gm-e67.3951639393"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 631812299
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen-honda-k.631812299"
#define SIGNATURE_HASH 3976757301
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-honda-k.3976757301"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4229542008
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen-nb1.4229542008"
#define SIGNATURE_HASH 884572294
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen-nb1.884572294"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 499085819
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen121nissan.499085819"
#define SIGNATURE_HASH 3575595269
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121nissan.3575595269"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 128295596
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen121vag.128295596"
#define SIGNATURE_HASH 3473248850
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen121vag.3473248850"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1544108549
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen128.1544108549"
#define SIGNATURE_HASH 2494106363
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen128.2494106363"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2264616407
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen154hyundai.2264616407"
#define SIGNATURE_HASH 1314618665
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen154hyundai.1314618665"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4288658242
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen72.4288658242"
#define SIGNATURE_HASH 926911420
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen72.926911420"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1686845826
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen81.1686845826"
#define SIGNATURE_HASH 2888501628
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen81.2888501628"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2113810603
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellen88bmw.2113810603"
#define SIGNATURE_HASH 3042836565
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellen88bmw.3042836565"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2027299147
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellenNA6.2027299147"
#define SIGNATURE_HASH 2960527797
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA6.2960527797"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 511127940
#define TS_SIGNATURE "rusEFI master.2023.09.16.hellenNA8_96.511127940"
#define SIGNATURE_HASH 3604414842
#define TS_SIGNATURE "rusEFI master.2023.09.17.hellenNA8_96.3604414842"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 4211875747
#define TS_SIGNATURE "rusEFI master.2023.09.16.kin.4211875747"
#define SIGNATURE_HASH 866922333
#define TS_SIGNATURE "rusEFI master.2023.09.17.kin.866922333"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2313199969
#define TS_SIGNATURE "rusEFI master.2023.09.16.m74_9.2313199969"
#define SIGNATURE_HASH 1094750623
#define TS_SIGNATURE "rusEFI master.2023.09.17.m74_9.1094750623"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3632567029
#define TS_SIGNATURE "rusEFI master.2023.09.16.mre_f4.3632567029"
#define SIGNATURE_HASH 270836235
#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f4.270836235"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3632567029
#define TS_SIGNATURE "rusEFI master.2023.09.16.mre_f7.3632567029"
#define SIGNATURE_HASH 270836235
#define TS_SIGNATURE "rusEFI master.2023.09.17.mre_f7.270836235"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.nucleo_f429.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f429.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.nucleo_f767.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_f767.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.nucleo_h743.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.nucleo_h743.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2739892479
#define TS_SIGNATURE "rusEFI master.2023.09.16.prometheus_405.2739892479"
#define SIGNATURE_HASH 1810841601
#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_405.1810841601"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2739892479
#define TS_SIGNATURE "rusEFI master.2023.09.16.prometheus_469.2739892479"
#define SIGNATURE_HASH 1810841601
#define TS_SIGNATURE "rusEFI master.2023.09.17.prometheus_469.1810841601"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2479375125
#define TS_SIGNATURE "rusEFI master.2023.09.16.proteus_f4.2479375125"
#define SIGNATURE_HASH 1533572075
#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f4.1533572075"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2479375125
#define TS_SIGNATURE "rusEFI master.2023.09.16.proteus_f7.2479375125"
#define SIGNATURE_HASH 1533572075
#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_f7.1533572075"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2479375125
#define TS_SIGNATURE "rusEFI master.2023.09.16.proteus_h7.2479375125"
#define SIGNATURE_HASH 1533572075
#define TS_SIGNATURE "rusEFI master.2023.09.17.proteus_h7.1533572075"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4152383539
#define TS_SIGNATURE "rusEFI master.2023.09.16.s105.4152383539"
#define SIGNATURE_HASH 1059088589
#define TS_SIGNATURE "rusEFI master.2023.09.17.s105.1059088589"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1591228390
#define TS_SIGNATURE "rusEFI master.2023.09.16.small-can.1591228390"
#define SIGNATURE_HASH 2524448536
#define TS_SIGNATURE "rusEFI master.2023.09.17.small-can.2524448536"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2488695416
#define TS_SIGNATURE "rusEFI master.2023.09.16.subaru_eg33_f7.2488695416"
#define SIGNATURE_HASH 1559644806
#define TS_SIGNATURE "rusEFI master.2023.09.17.subaru_eg33_f7.1559644806"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2480651631
#define TS_SIGNATURE "rusEFI master.2023.09.16.t-b-g.2480651631"
#define SIGNATURE_HASH 1534823825
#define TS_SIGNATURE "rusEFI master.2023.09.17.t-b-g.1534823825"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 427135309
#define TS_SIGNATURE "rusEFI master.2023.09.16.tdg-pdm8.427135309"
#define SIGNATURE_HASH 3520438707
#define TS_SIGNATURE "rusEFI master.2023.09.17.tdg-pdm8.3520438707"

View File

@ -200,7 +200,7 @@ Pull-up resistor value on your board
value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields
### knockBandCustom
We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override
We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect
### displacement
Engine displacement in litres

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.f407-discovery.818098004"
signature = "rusEFI master.2023.09.17.f407-discovery.4167245738"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.f407-discovery.818098004" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.f407-discovery.4167245738" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:48:00 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.48way.3607180757"
signature = "rusEFI master.2023.09.17.48way.530646315"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.48way.3607180757" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.48way.530646315" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Battery Reference Input (A0)","TPS Reference Input (A1)","CLT Reference Input (A2)","IAT Reference Input (A3)","O2 Reference Input (A4)","INVALID","INVALID","INVALID","MAP Pressure Reference Input (B0)","BARO Pressure Reference Input (B1)","INVALID","INVALID","INVALID","INVALID","Fuel Pressure Reference Input (C4)","Oil Pressure Reference Input (C5)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:18 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:58 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-2chan.877857277"
signature = "rusEFI master.2023.09.17.alphax-2chan.4243798275"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-2chan.877857277" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-2chan.4243798275" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 14:58:58 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:42 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-4chan.4085539330"
signature = "rusEFI master.2023.09.17.alphax-4chan.992236284"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-4chan.4085539330" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-4chan.992236284" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:22 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:46 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-4chan_f7.4085539330"
signature = "rusEFI master.2023.09.17.alphax-4chan_f7.992236284"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-4chan_f7.4085539330" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-4chan_f7.992236284" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:24 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:49 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-8chan-revA.2720555884"
signature = "rusEFI master.2023.09.17.alphax-8chan-revA.1787319186"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-8chan-revA.2720555884" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-8chan-revA.1787319186" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:32 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:58 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-8chan.2659697383"
signature = "rusEFI master.2023.09.17.alphax-8chan.1445458457"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-8chan.2659697383" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-8chan.1445458457" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:27 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:52 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.alphax-8chan_f7.2659697383"
signature = "rusEFI master.2023.09.17.alphax-8chan_f7.1445458457"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.alphax-8chan_f7.2659697383" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.alphax-8chan_f7.1445458457" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:29 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:55 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.atlas.2400274504"
signature = "rusEFI master.2023.09.17.atlas.1202813110"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.atlas.2400274504" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.atlas.1202813110" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:51 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:40 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.core8.2885464281"
signature = "rusEFI master.2023.09.17.core8.1667006503"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.core8.2885464281" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.core8.1667006503" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","On-board Battery Sense (A0)","Analog Inputs 1 (A1)","Analog Inputs 2 (A2)","Analog Inputs 3 (A3)","Analog Inputs 4 (A4)","On-board MAP (A5)","Analog Inputs 6 (A6)","Analog Inputs 7 (A7)","On-board BARO (B0)","Analog Inputs 9 (B1)","Analog Inputs 10 (C0)","Primary On-board O2 (C1)","Secondary On-board O2 (C2)","Analog Inputs 13 (C3)","Analog Inputs 14 (C4)","Analog Inputs 15 (C5)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:15 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:55 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.cypress.2480651631"
signature = "rusEFI master.2023.09.17.cypress.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.cypress.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.cypress.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:15 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:38 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.f407-discovery.818098004"
signature = "rusEFI master.2023.09.17.f407-discovery.4167245738"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.f407-discovery.818098004" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.f407-discovery.4167245738" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:55 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:46 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.f429-discovery.2480651631"
signature = "rusEFI master.2023.09.17.f429-discovery.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.f429-discovery.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.f429-discovery.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:41 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:28 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.frankenso_na6.2978569637"
signature = "rusEFI master.2023.09.17.frankenso_na6.2032758107"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.frankenso_na6.2978569637" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.frankenso_na6.2032758107" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:27 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:10 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.harley81.1343360309"
signature = "rusEFI master.2023.09.17.harley81.2561818059"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.harley81.1343360309" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.harley81.2561818059" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","27 - TPS 2","INVALID","41 - PPS 1","52 - TPS 1","5 Battery Sense","INVALID","INVALID","42 - PPS 2","INVALID","53 - MAP","55 Engine Temperature","49 CLT","72 IAT","32 Oil Pressure","34 Kickstand Position Sensor"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:34 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:02 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen-112-17.3161557581"
signature = "rusEFI master.2023.09.17.hellen-112-17.1959901875"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen-112-17.3161557581" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen-112-17.1959901875" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","114 Analog Input","INVALID","121 PPS1","203 TPS Throttle Position 1","INVALID","107 TODO","119 Analog Input","110 Analog Input","INVALID","219 MAP","109 Analog Input","215 CLT","227 IAT","111 Analog Input","112 Analog Input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:51 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:24 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen-gm-e67.589892511"
signature = "rusEFI master.2023.09.17.hellen-gm-e67.3951639393"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen-gm-e67.589892511" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen-gm-e67.3951639393" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:01 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:36 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen-honda-k.631812299"
signature = "rusEFI master.2023.09.17.hellen-honda-k.3976757301"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen-honda-k.631812299" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen-honda-k.3976757301" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","INVALID","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:44 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:14 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen-nb1.4229542008"
signature = "rusEFI master.2023.09.17.hellen-nb1.884572294"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen-nb1.4229542008" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen-nb1.884572294" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:58 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:33 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen121nissan.499085819"
signature = "rusEFI master.2023.09.17.hellen121nissan.3575595269"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen121nissan.499085819" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen121nissan.3575595269" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:41 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:11 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen121vag.128295596"
signature = "rusEFI master.2023.09.17.hellen121vag.3473248850"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen121vag.128295596" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen121vag.3473248850" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:39 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:08 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen128.1544108549"
signature = "rusEFI master.2023.09.17.hellen128.2494106363"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen128.1544108549" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen128.2494106363" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:36 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:05 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen154hyundai.2264616407"
signature = "rusEFI master.2023.09.17.hellen154hyundai.1314618665"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen154hyundai.2264616407" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen154hyundai.1314618665" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:46 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:17 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen72.4288658242"
signature = "rusEFI master.2023.09.17.hellen72.926911420"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen72.4288658242" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen72.926911420" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:54 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:27 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen81.1686845826"
signature = "rusEFI master.2023.09.17.hellen81.2888501628"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen81.1686845826" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen81.2888501628" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:56 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:30 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellen88bmw.2113810603"
signature = "rusEFI master.2023.09.17.hellen88bmw.3042836565"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellen88bmw.2113810603" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellen88bmw.3042836565" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:49 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:20 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellenNA6.2027299147"
signature = "rusEFI master.2023.09.17.hellenNA6.2960527797"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellenNA6.2027299147" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellenNA6.2960527797" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:03 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:39 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.hellenNA8_96.511127940"
signature = "rusEFI master.2023.09.17.hellenNA8_96.3604414842"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.hellenNA8_96.511127940" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.hellenNA8_96.3604414842" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:06 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:42 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.kin.4211875747"
signature = "rusEFI master.2023.09.17.kin.866922333"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.kin.4211875747" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.kin.866922333" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:15 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:37 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.m74_9.2313199969"
signature = "rusEFI master.2023.09.17.m74_9.1094750623"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.m74_9.2313199969" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.m74_9.1094750623" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:20 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:01 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.mre_f4.3632567029"
signature = "rusEFI master.2023.09.17.mre_f4.270836235"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.mre_f4.3632567029" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.mre_f4.270836235" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:13 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:51 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.mre_f7.3632567029"
signature = "rusEFI master.2023.09.17.mre_f7.270836235"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.mre_f7.3632567029" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.mre_f7.270836235" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:11 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:48 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.nucleo_f429.2480651631"
signature = "rusEFI master.2023.09.17.nucleo_f429.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.nucleo_f429.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.nucleo_f429.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:44 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:31 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.nucleo_f767.2480651631"
signature = "rusEFI master.2023.09.17.nucleo_f767.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.nucleo_f767.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.nucleo_f767.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:46 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:34 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.nucleo_h743.2480651631"
signature = "rusEFI master.2023.09.17.nucleo_h743.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.nucleo_h743.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.nucleo_h743.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:48 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:37 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.prometheus_405.2739892479"
signature = "rusEFI master.2023.09.17.prometheus_405.1810841601"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.prometheus_405.2739892479" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.prometheus_405.1810841601" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:32 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:16 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.prometheus_469.2739892479"
signature = "rusEFI master.2023.09.17.prometheus_469.1810841601"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.prometheus_469.2739892479" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.prometheus_469.1810841601" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:30 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:13 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.proteus_f4.2479375125"
signature = "rusEFI master.2023.09.17.proteus_f4.1533572075"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.proteus_f4.2479375125" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.proteus_f4.1533572075" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:37 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:22 UTC 2023
pageSize = 27468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.proteus_f7.2479375125"
signature = "rusEFI master.2023.09.17.proteus_f7.1533572075"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.proteus_f7.2479375125" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.proteus_f7.1533572075" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:34 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:19 UTC 2023
pageSize = 27468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.proteus_h7.2479375125"
signature = "rusEFI master.2023.09.17.proteus_h7.1533572075"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.proteus_h7.2479375125" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.proteus_h7.1533572075" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:39 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:25 UTC 2023
pageSize = 27468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.s105.4152383539"
signature = "rusEFI master.2023.09.17.s105.1059088589"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.s105.4152383539" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.s105.1059088589" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:22 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:04 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.small-can.1591228390"
signature = "rusEFI master.2023.09.17.small-can.2524448536"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.small-can.1591228390" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.small-can.2524448536" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - Analog input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","INVALID","INVALID","INVALID","B2 - Analog input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:08 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:51:45 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.subaru_eg33_f7.2488695416"
signature = "rusEFI master.2023.09.17.subaru_eg33_f7.1559644806"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.subaru_eg33_f7.2488695416" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.subaru_eg33_f7.1559644806" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:46:17 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:50:39 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.t-b-g.2480651631"
signature = "rusEFI master.2023.09.17.t-b-g.1534823825"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.t-b-g.2480651631" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.t-b-g.1534823825" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:25 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:07 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.09.16.tdg-pdm8.427135309"
signature = "rusEFI master.2023.09.17.tdg-pdm8.3520438707"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.09.16.tdg-pdm8.427135309" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.09.17.tdg-pdm8.3520438707" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:47:53 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:43 UTC 2023
pageSize = 23468
page = 1
@ -1549,7 +1549,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0
iat_tempC_1 = "these values are in Celcius"
iat_bias_resistor = "Pull-up resistor value on your board"
hip9011PrescalerAndSDO = "value '6' for 8MHz hw osc\nread hip9011 datasheet for details\ntodo split into two bit fields"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override"
knockBandCustom = "We calculate knock band based of cylinderBore\n Use this to override - kHz knock band override\nRequires power cycling to effect"
displacement = "Engine displacement in litres"
cylindersCount = "Number of cylinder the engine has."
cylinderBore = "Cylinder diameter in mm."
@ -3177,6 +3177,8 @@ lambdaTimeSinceGood = scalar, U16, 1400, "sec", 0.01, 0
requiresPowerCycle = auxAnalogInputs7
requiresPowerCycle = auxAnalogInputs8
requiresPowerCycle = knockBandCustom
readOnly = warning_message
defaultValue = gearCountArray, -1 0 1 2 3 4 5 6 7 8

View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Sep 16 04:06:21 UTC 2023
// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Sep 17 13:52:52 UTC 2023
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -1025,7 +1025,6 @@ public class Fields {
public static final int SentEtbType_FORD_TYPE_1 = 2;
public static final int SentEtbType_GM_TYPE_1 = 1;
public static final int SentEtbType_NONE = 0;
public static final int SIGNATURE_HASH = 818098004;
public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin";
public static final int spi_device_e_SPI_DEVICE_1 = 1;
public static final int spi_device_e_SPI_DEVICE_2 = 2;
@ -1250,7 +1249,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI master.2023.09.16.f407-discovery.818098004";
public static final String TS_SIGNATURE = "rusEFI master.2023.09.17.f407-discovery.4167245738";
public static final char TS_SIMULATE_CAN = '>';
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';