rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ETB bias curve in TS

This commit is contained in:
rusefi 2018-12-09 13:50:13 -05:00
parent 36047e7f3d
commit d632d72ed3
11 changed files with 56 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
firmware/controllers/algo/engine_configuration.cpp
View File

@ -342,7 +342,8 @@ void prepareVoidConfiguration(engine_configuration_s *engineConfiguration) {
setDefaultAlternatorParameters();
#endif
#if EFI_ELECTRONIC_THROTTLE_BODY || defined(__DOXYGEN__)
setDefaultEtbParameters();
setDefaultEtbParameters(PASS_ENGINE_PARAMETER_SIGNATURE);
setDefaultEtbBiasCurve(PASS_ENGINE_PARAMETER_SIGNATURE);
#endif
#if EFI_IDLE_CONTROL || defined(__DOXYGEN__)
setDefaultIdleParameters();

20
firmware/controllers/electronic_throttle.cpp
View File

@ -321,6 +321,26 @@ static void setAutoOffset(int offset) {
autoTune.reset();
}
void setDefaultEtbBiasCurve(DECLARE_ENGINE_PARAMETER_SIGNATURE) {
engineConfiguration->etbBiasBins[0] = 0;
engineConfiguration->etbBiasBins[1] = 5;
engineConfiguration->etbBiasBins[2] = 7;
engineConfiguration->etbBiasBins[3] = 8;
engineConfiguration->etbBiasBins[4] = 11;
engineConfiguration->etbBiasBins[5] = 98;
engineConfiguration->etbBiasBins[6] = 99;
engineConfiguration->etbBiasBins[7] = 100;
engineConfiguration->etbBiasValues[0] = -100 / 255.0f * 100;
engineConfiguration->etbBiasValues[1] = -95 / 255.0f * 100;
engineConfiguration->etbBiasValues[2] = -80 / 255.0f * 100;
engineConfiguration->etbBiasValues[3] = 0 / 255.0f * 100;
engineConfiguration->etbBiasValues[4] = 115 / 255.0f * 100;
engineConfiguration->etbBiasValues[5] = 142 / 255.0f * 100;
engineConfiguration->etbBiasValues[6] = 142 / 255.0f * 100;
engineConfiguration->etbBiasValues[7] = 142 / 255.0f * 100;
}
void initElectronicThrottle(void) {
addConsoleAction("ethinfo", showEthInfo);
if (!hasPedalPositionSensor()) {

3
firmware/controllers/electronic_throttle.h
View File

@ -10,7 +10,8 @@
#include "engine.h"
void initElectronicThrottle(void);
void setDefaultEtbParameters(void);
void setDefaultEtbBiasCurve(DECLARE_ENGINE_PARAMETER_SIGNATURE);
void setDefaultEtbParameters(DECLARE_ENGINE_PARAMETER_SIGNATURE);
void setEtbPFactor(float value);
void setEtbIFactor(float value);
void setEtbDFactor(float value);

2
firmware/controllers/engine_controller.cpp
View File

@ -736,5 +736,5 @@ int getRusEfiVersion(void) {
if (initBootloader() != 0)
return 123;
#endif /* EFI_BOOTLOADER_INCLUDE_CODE */
return 20181208;
return 20181209;
}

4
firmware/flash_erase.bat
View File

@ -1,7 +1,7 @@
rem st-link_cli -c SWD ur -ME
rem 0x100000 would erase both code and configuration
rem use 0x080000 if you want to erase only configuratio
echo I am flash_erase_new_board.bat
echo I am flash_erase.bat
rem weird, it used to be much nicer with openocd 0.8.0, file location was not broken?
rem maybe https://sourceforge.net/p/openocd/tickets/105/ ?
@ -16,7 +16,7 @@ if not exist openocd/openocd.exe exit -1
rem newer discovery boards
echo Invoking openocd...
openocd\openocd.exe -f openocd/stm32f429disc1.cfg -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x0100000" -c shutdown
openocd\openocd.exe -f openocd/stm32f4discovery.cfg -c init -c targets -c "halt" -c "flash erase_address 0x08000000 0x0100000" -c shutdown
echo Just invoked openocd!

2
firmware/integration/rusefi_config.txt
View File

@ -928,7 +928,7 @@ tChargeMode_e tChargeMode;
uint8_t[ETB_BIAS_CURVE_LENGTH] etbBiasBins;target TPS value, 0 to 100%;"target TPS position", 1, 0.0, 0, 100.0, 0
float[ETB_BIAS_CURVE_LENGTH] etbBiasValues;PWM bias, 0 to 100%;"ETB duty cycle bias", 1, 0.0, 0, 100.0, 2
float[ETB_BIAS_CURVE_LENGTH] etbBiasValues;PWM bias, 0 to 100%;"ETB duty cycle bias", 1, 0.0, -100, 100.0, 2
int[581] unusedEnd;

4
firmware/svnversion.h
View File

@ -1,5 +1,5 @@
// This file was generated by Version2Header
// Wed Nov 21 21:00:21 EST 2018
// Sun Dec 09 13:33:16 EST 2018
#ifndef VCS_VERSION
#define VCS_VERSION "15987"
#define VCS_VERSION "16057"
#endif

19
firmware/tunerstudio/rusefi.ini
View File

@ -63,7 +63,7 @@ enable2ndByteCanID = false
; see PAGE_0_SIZE in C source code
; CONFIG_DEFINITION_START
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Dec 09 10:18:27 EST 2018
; this section was generated automatically by ConfigDefinition.jar based on rusefi_config.txt Sun Dec 09 13:49:35 EST 2018
pageSize = 20000
page = 1
@ -795,8 +795,8 @@ page = 1
tChargeAirIncrLimit = scalar, F32, 4104, "tChange Increment Limit, deg/sec", 1, 0, 0.0, 100.0, 1
tChargeAirDecrLimit = scalar, F32, 4108, "tChange Decrement Limit, deg/sec", 1, 0, 0.0, 100.0, 1
tChargeMode = bits, U32, 4112, [0:0], "RPM+TPS (Default)", "Air Mass Interpolation"
etbBiasBins = array, U8, 4116, [8], "target TPS position", 1, 0.0, 0, 100.0, 0
etbBiasValues = array, F32, 4124, [8], "ETB duty cycle bias", 1, 0.0, 0, 100.0, 2
etbBiasBins = array, U08, 4116, [8], "target TPS position", 1, 0.0, 0, 100.0, 0
etbBiasValues = array, F32, 4124, [8], "ETB duty cycle bias", 1, 0.0, -100, 100.0, 2
;no TS info - skipping unusedEnd offset 4156
cltCrankingCorrBins = array, F32, 6480, [8], "C", 1, 0, -100.0, 250.0, 2
cltCrankingCorr = array, F32, 6512, [8], "%", 1, 0, 0.0, 500.0, 2
@ -1281,6 +1281,14 @@ fileVersion = { 20171101 }
yBins = crankingFuelCoef
gauge = CLTGauge
curve = etbTpsBiasCurve, "Electronic TB Bias Curve"
columnLabel = "TPS", "duty bias"
xAxis = 0, 100, 10
yAxis = 0, 100, 10
xBins = etbBiasBins, TPSValue
yBins = etbBiasValues
gauge = TPSGauge
curve = crankingTpsCurve, "Cranking TPS Multiplier"
columnLabel = "TPS", "Multiplier"
xAxis = 0, 100, 10
@ -1849,7 +1857,8 @@ menuDialog = main
subMenu = std_separator
subMenu = fanSetting, "Fan Settings"
subMenu = malfunction, "MIL Settings"
subMenu = etbDialog, "Electronic Thtottle Body (alpha version)"
subMenu = etbDialog, "Electronic Thtottle Body (beta version)"
subMenu = etbTpsBiasCurve, "Electronic Thtottle Body Bias Curve"
subMenu = std_separator
subMenu = std_realtime, "&Realtime Display", 0
@ -3004,7 +3013,7 @@ cmd_stop_engine = "w\x00\x99\x00\x00"
topicHelp = "veTableDialogHelp"
panel = veTableMap, South
dialog = etbDialog, "Electronic Thtottle Body (alpha)"
dialog = etbDialog, "Electronic Thtottle Body (beta)"
field = "verbose", isVerboseETB
field = "Throttle Pedal Up", throttlePedalUpVoltage
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage

13
firmware/tunerstudio/rusefi.input
View File

@ -430,6 +430,14 @@ fileVersion = { 20171101 }
yBins = crankingFuelCoef
gauge = CLTGauge
curve = etbTpsBiasCurve, "Electronic TB Bias Curve"
columnLabel = "TPS", "duty bias"
xAxis = 0, 100, 10
yAxis = 0, 100, 10
xBins = etbBiasBins, TPSValue
yBins = etbBiasValues
gauge = TPSGauge
curve = crankingTpsCurve, "Cranking TPS Multiplier"
columnLabel = "TPS", "Multiplier"
xAxis = 0, 100, 10
@ -998,7 +1006,8 @@ menuDialog = main
subMenu = std_separator
subMenu = fanSetting, "Fan Settings"
subMenu = malfunction, "MIL Settings"
subMenu = etbDialog, "Electronic Thtottle Body (alpha version)"
subMenu = etbDialog, "Electronic Thtottle Body (beta version)"
subMenu = etbTpsBiasCurve, "Electronic Thtottle Body Bias Curve"
subMenu = std_separator
subMenu = std_realtime, "&Realtime Display", 0
@ -2153,7 +2162,7 @@ cmd_stop_engine = "w\x00\x99\x00\x00"
topicHelp = "veTableDialogHelp"
panel = veTableMap, South
dialog = etbDialog, "Electronic Thtottle Body (alpha)"
dialog = etbDialog, "Electronic Thtottle Body (beta)"
field = "verbose", isVerboseETB
field = "Throttle Pedal Up", throttlePedalUpVoltage
field = "Throttle Pedal Wide Open", throttlePedalWOTVoltage

BIN
java_tools/ConfigDefinition.jar
View File

Binary file not shown.

2
java_tools/configuration_definition/src/com/rusefi/TypesHelper.java
View File

@ -36,7 +36,7 @@ public class TypesHelper {
if (UINT_16_T.equals(type))
return "U16";
if (UINT8_T.equals(type))
return "U8";
return "U08";
System.out.println("No TS type convesion for " + type);
return type;
}