Auto-generated configs and docs

This commit is contained in:
GitHub gen-configs Action 2023-10-15 16:20:50 +00:00
parent 9273d96fda
commit d7ebce0f61
100 changed files with 481 additions and 296 deletions

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:54 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:15 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -4436,10 +4436,19 @@ struct engine_configuration_s {
*/
Gpio dacOutputPins[DAC_OUTPUT_COUNT];
/**
units
* offset 4114
*/
uint8_t mainUnusedEnd[250];
output_pin_e speedometerOutputPin;
/**
* Number of speedometer pulses per kilometer travelled.
* offset 4116
*/
uint16_t speedometerPulsePerKm;
/**
units
* offset 4118
*/
uint8_t mainUnusedEnd[246];
};
static_assert(sizeof(engine_configuration_s) == 4364);
@ -5351,4 +5360,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23668);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:54 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:15 UTC 2023

View File

@ -803,7 +803,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 2445259369
#define SIGNATURE_HASH 2026908173
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1097,7 +1097,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.10.15.cypress.2445259369"
#define TS_SIGNATURE "rusEFI master.2023.10.15.cypress.2026908173"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:53 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:13 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -4436,10 +4436,19 @@ struct engine_configuration_s {
*/
Gpio dacOutputPins[DAC_OUTPUT_COUNT];
/**
units
* offset 4114
*/
uint8_t mainUnusedEnd[250];
output_pin_e speedometerOutputPin;
/**
* Number of speedometer pulses per kilometer travelled.
* offset 4116
*/
uint16_t speedometerPulsePerKm;
/**
units
* offset 4118
*/
uint8_t mainUnusedEnd[246];
};
static_assert(sizeof(engine_configuration_s) == 4364);
@ -5351,4 +5360,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 22292);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:53 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:13 UTC 2023

View File

@ -803,7 +803,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 3547231687
#define SIGNATURE_HASH 973204899
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1097,7 +1097,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.10.15.kin.3547231687"
#define TS_SIGNATURE "rusEFI master.2023.10.15.kin.973204899"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:56 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:16 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -4436,10 +4436,19 @@ struct engine_configuration_s {
*/
Gpio dacOutputPins[DAC_OUTPUT_COUNT];
/**
units
* offset 4114
*/
uint8_t mainUnusedEnd[250];
output_pin_e speedometerOutputPin;
/**
* Number of speedometer pulses per kilometer travelled.
* offset 4116
*/
uint16_t speedometerPulsePerKm;
/**
units
* offset 4118
*/
uint8_t mainUnusedEnd[246];
};
static_assert(sizeof(engine_configuration_s) == 4364);
@ -5351,4 +5360,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23668);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:23:56 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:16 UTC 2023

View File

@ -1041,7 +1041,7 @@
#define show_Frankenso_presets false
#define show_Proteus_presets false
#define show_test_presets false
#define SIGNATURE_HASH 2519889278
#define SIGNATURE_HASH 2136861978
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1335,7 +1335,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.10.15.subaru_eg33_f7.2519889278"
#define TS_SIGNATURE "rusEFI master.2023.10.15.subaru_eg33_f7.2136861978"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -1,4 +1,4 @@
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:26:04 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:48 UTC 2023
// by class com.rusefi.output.CHeaderConsumer
// begin
#pragma once
@ -4436,10 +4436,19 @@ struct engine_configuration_s {
*/
Gpio dacOutputPins[DAC_OUTPUT_COUNT];
/**
units
* offset 4114
*/
uint8_t mainUnusedEnd[250];
output_pin_e speedometerOutputPin;
/**
* Number of speedometer pulses per kilometer travelled.
* offset 4116
*/
uint16_t speedometerPulsePerKm;
/**
units
* offset 4118
*/
uint8_t mainUnusedEnd[246];
};
static_assert(sizeof(engine_configuration_s) == 4364);
@ -5351,4 +5360,4 @@ struct persistent_config_s {
static_assert(sizeof(persistent_config_s) == 23668);
// end
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Oct 12 15:26:04 UTC 2023
// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:48 UTC 2023

View File

@ -1094,7 +1094,7 @@
#define SentEtbType_NONE 0
#define show_Frankenso_presets true
#define show_test_presets true
#define SIGNATURE_HASH 849813586
#define SIGNATURE_HASH 3687364662
#define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
#define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4"
#define spi_device_e_SPI_DEVICE_1 1
@ -1388,7 +1388,7 @@
#define ts_show_vr_threshold_2 true
#define ts_show_vr_threshold_all true
#define ts_show_vr_threshold_pins true
#define TS_SIGNATURE "rusEFI master.2023.10.15.f407-discovery.849813586"
#define TS_SIGNATURE "rusEFI master.2023.10.15.f407-discovery.3687364662"
#define TS_SIMULATE_CAN '>'
#define TS_SIMULATE_CAN_char >
#define TS_SINGLE_WRITE_COMMAND 'W'

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3580181203
#define TS_SIGNATURE "rusEFI master.2023.10.15.48way.3580181203"
#define SIGNATURE_HASH 1007329975
#define TS_SIGNATURE "rusEFI master.2023.10.15.48way.1007329975"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3788113518
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-2chan.3788113518"
#define SIGNATURE_HASH 145071626
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-2chan.145071626"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1502098580
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-4chan.1502098580"
#define SIGNATURE_HASH 2967973104
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-4chan.2967973104"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1502098580
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-4chan_f7.1502098580"
#define SIGNATURE_HASH 2967973104
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-4chan_f7.2967973104"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2689363050
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan-revA.2689363050"
#define SIGNATURE_HASH 1227093006
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan-revA.1227093006"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2632175073
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan.2632175073"
#define SIGNATURE_HASH 1972131205
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan.1972131205"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2632175073
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan_f7.2632175073"
#define SIGNATURE_HASH 1972131205
#define TS_SIGNATURE "rusEFI master.2023.10.15.alphax-8chan_f7.1972131205"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2373273422
#define TS_SIGNATURE "rusEFI master.2023.10.15.atlas.2373273422"
#define SIGNATURE_HASH 1679482666
#define TS_SIGNATURE "rusEFI master.2023.10.15.atlas.1679482666"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2845360095
#define TS_SIGNATURE "rusEFI master.2023.10.15.core8.2845360095"
#define SIGNATURE_HASH 1089939387
#define TS_SIGNATURE "rusEFI master.2023.10.15.core8.1089939387"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.cypress.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.cypress.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 849813586
#define TS_SIGNATURE "rusEFI master.2023.10.15.f407-discovery.849813586"
#define SIGNATURE_HASH 3687364662
#define TS_SIGNATURE "rusEFI master.2023.10.15.f407-discovery.3687364662"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.f429-discovery.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.f429-discovery.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3018674851
#define TS_SIGNATURE "rusEFI master.2023.10.15.frankenso_na6.3018674851"
#define SIGNATURE_HASH 1518521031
#define TS_SIGNATURE "rusEFI master.2023.10.15.frankenso_na6.1518521031"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 302109248
#define TS_SIGNATURE "rusEFI master.2023.10.15.harley81.302109248"
#define SIGNATURE_HASH 4218309156
#define TS_SIGNATURE "rusEFI master.2023.10.15.harley81.4218309156"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3526840997
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-112-17.3526840997"
#define SIGNATURE_HASH 995674817
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-112-17.995674817"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 558695577
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-gm-e67.558695577"
#define SIGNATURE_HASH 3357711613
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-gm-e67.3357711613"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1214221386
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-honda-k.1214221386"
#define SIGNATURE_HASH 2704282670
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-honda-k.2704282670"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4269653886
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-nb1.4269653886"
#define SIGNATURE_HASH 387065626
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen-nb1.387065626"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 143217757
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen121nissan.143217757"
#define SIGNATURE_HASH 3789999161
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen121nissan.3789999161"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 96578986
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen121vag.96578986"
#define SIGNATURE_HASH 3970840014
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen121vag.3970840014"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1584215299
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen128.1584215299"
#define SIGNATURE_HASH 3070405991
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen128.3070405991"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1090304211
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen154hyundai.1090304211"
#define SIGNATURE_HASH 2844991671
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen154hyundai.2844991671"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4261131332
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen72.4261131332"
#define SIGNATURE_HASH 345254944
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen72.345254944"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 1290551302
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen81.1290551302"
#define SIGNATURE_HASH 2776881250
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen81.2776881250"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2140815277
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen88bmw.2140815277"
#define SIGNATURE_HASH 2532681673
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellen88bmw.2532681673"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2058497613
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellenNA6.2058497613"
#define SIGNATURE_HASH 2480780841
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellenNA6.2480780841"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 471023234
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellenNA8_96.471023234"
#define SIGNATURE_HASH 4118587110
#define TS_SIGNATURE "rusEFI master.2023.10.15.hellenNA8_96.4118587110"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer
//
#define SIGNATURE_HASH 3547231687
#define TS_SIGNATURE "rusEFI master.2023.10.15.kin.3547231687"
#define SIGNATURE_HASH 973204899
#define TS_SIGNATURE "rusEFI master.2023.10.15.kin.973204899"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2340728423
#define TS_SIGNATURE "rusEFI master.2023.10.15.m74_9.2340728423"
#define SIGNATURE_HASH 1659581955
#define TS_SIGNATURE "rusEFI master.2023.10.15.m74_9.1659581955"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3000130537
#define TS_SIGNATURE "rusEFI master.2023.10.15.mre_f4.3000130537"
#define SIGNATURE_HASH 1539163021
#define TS_SIGNATURE "rusEFI master.2023.10.15.mre_f4.1539163021"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 3000130537
#define TS_SIGNATURE "rusEFI master.2023.10.15.mre_f7.3000130537"
#define SIGNATURE_HASH 1539163021
#define TS_SIGNATURE "rusEFI master.2023.10.15.mre_f7.1539163021"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_f429.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_f429.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_f767.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_f767.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_h743.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.nucleo_h743.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2703982585
#define TS_SIGNATURE "rusEFI master.2023.10.15.prometheus_405.2703982585"
#define SIGNATURE_HASH 1212475293
#define TS_SIGNATURE "rusEFI master.2023.10.15.prometheus_405.1212475293"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2703982585
#define TS_SIGNATURE "rusEFI master.2023.10.15.prometheus_469.2703982585"
#define SIGNATURE_HASH 1212475293
#define TS_SIGNATURE "rusEFI master.2023.10.15.prometheus_469.1212475293"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2443987987
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_f4.2443987987"
#define SIGNATURE_HASH 2026099831
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_f4.2026099831"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2443987987
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_f7.2443987987"
#define SIGNATURE_HASH 2026099831
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_f7.2026099831"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2443987987
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_h7.2443987987"
#define SIGNATURE_HASH 2026099831
#define TS_SIGNATURE "rusEFI master.2023.10.15.proteus_h7.2026099831"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4125382453
#define TS_SIGNATURE "rusEFI master.2023.10.15.s105.4125382453"
#define SIGNATURE_HASH 478924625
#define TS_SIGNATURE "rusEFI master.2023.10.15.s105.478924625"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 4090597713
#define TS_SIGNATURE "rusEFI master.2023.10.15.small-can.4090597713"
#define SIGNATURE_HASH 448661813
#define TS_SIGNATURE "rusEFI master.2023.10.15.small-can.448661813"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2519889278
#define TS_SIGNATURE "rusEFI master.2023.10.15.subaru_eg33_f7.2519889278"
#define SIGNATURE_HASH 2136861978
#define TS_SIGNATURE "rusEFI master.2023.10.15.subaru_eg33_f7.2136861978"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 2445259369
#define TS_SIGNATURE "rusEFI master.2023.10.15.t-b-g.2445259369"
#define SIGNATURE_HASH 2026908173
#define TS_SIGNATURE "rusEFI master.2023.10.15.t-b-g.2026908173"

View File

@ -2,5 +2,5 @@
// was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
//
#define SIGNATURE_HASH 454139467
#define TS_SIGNATURE "rusEFI master.2023.10.15.tdg-pdm8.454139467"
#define SIGNATURE_HASH 4068345391
#define TS_SIGNATURE "rusEFI master.2023.10.15.tdg-pdm8.4068345391"

View File

@ -1726,6 +1726,9 @@ float getConfigValueByName(const char *name) {
// compressorDischargeTemperature.config.bias_resistor
case -1555883851:
return engineConfiguration->compressorDischargeTemperature.config.bias_resistor;
// speedometerPulsePerKm
case 1007396714:
return engineConfiguration->speedometerPulsePerKm;
}
return EFI_ERROR_CODE;
}
@ -4601,6 +4604,11 @@ bool setConfigValueByName(const char *name, float value) {
{
engineConfiguration->compressorDischargeTemperature.config.bias_resistor = value;
return 1;
}
case 1007396714:
{
engineConfiguration->speedometerPulsePerKm = (int)value;
return 1;
}
}
return 0;

View File

@ -1720,3 +1720,6 @@ these values are in Celcius
### compressorDischargeTemperature.config.bias_resistor
Pull-up resistor value on your board
### speedometerPulsePerKm
Number of speedometer pulses per kilometer travelled.

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.f407-discovery.849813586"
signature = "rusEFI master.2023.10.15.f407-discovery.3687364662"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.f407-discovery.849813586" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.f407-discovery.3687364662" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:03:07 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:48 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.48way.3580181203"
signature = "rusEFI master.2023.10.15.48way.1007329975"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.48way.3580181203" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.48way.1007329975" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Battery Reference Input (A0)","TPS Reference Input (A1)","CLT Reference Input (A2)","IAT Reference Input (A3)","O2 Reference Input (A4)","INVALID","INVALID","INVALID","MAP Pressure Reference Input (B0)","BARO Pressure Reference Input (B1)","INVALID","INVALID","INVALID","INVALID","Fuel Pressure Reference Input (C4)","Oil Pressure Reference Input (C5)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:17 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:47 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-2chan.3788113518"
signature = "rusEFI master.2023.10.15.alphax-2chan.145071626"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-2chan.3788113518" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-2chan.145071626" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:06 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:20 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-4chan.1502098580"
signature = "rusEFI master.2023.10.15.alphax-4chan.2967973104"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-4chan.1502098580" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-4chan.2967973104" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:10 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:24 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-4chan_f7.1502098580"
signature = "rusEFI master.2023.10.15.alphax-4chan_f7.2967973104"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-4chan_f7.1502098580" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-4chan_f7.2967973104" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:13 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:27 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-8chan-revA.2689363050"
signature = "rusEFI master.2023.10.15.alphax-8chan-revA.1227093006"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-8chan-revA.2689363050" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-8chan-revA.1227093006" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:21 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:39 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-8chan.2632175073"
signature = "rusEFI master.2023.10.15.alphax-8chan.1972131205"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-8chan.2632175073" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-8chan.1972131205" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:15 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:31 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.alphax-8chan_f7.2632175073"
signature = "rusEFI master.2023.10.15.alphax-8chan_f7.1972131205"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.alphax-8chan_f7.2632175073" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.alphax-8chan_f7.1972131205" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","33A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","32A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:18 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:35 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.atlas.2373273422"
signature = "rusEFI master.2023.10.15.atlas.1679482666"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.atlas.2373273422" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.atlas.1679482666" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:57 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:36 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.core8.2845360095"
signature = "rusEFI master.2023.10.15.core8.1089939387"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.core8.2845360095" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.core8.1089939387" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","On-board Battery Sense (A0)","Analog Inputs 1 (A1)","Analog Inputs 2 (A2)","Analog Inputs 3 (A3)","Analog Inputs 4 (A4)","On-board MAP (A5)","Analog Inputs 6 (A6)","Analog Inputs 7 (A7)","On-board BARO (B0)","Analog Inputs 9 (B1)","Analog Inputs 10 (C0)","Primary On-board O2 (C1)","Secondary On-board O2 (C2)","Analog Inputs 13 (C3)","Analog Inputs 14 (C4)","Analog Inputs 15 (C5)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:14 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:43 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.cypress.2445259369"
signature = "rusEFI master.2023.10.15.cypress.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.cypress.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.cypress.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:02 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:15 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.f407-discovery.849813586"
signature = "rusEFI master.2023.10.15.f407-discovery.3687364662"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.f407-discovery.849813586" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.f407-discovery.3687364662" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:03:02 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:43 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.f429-discovery.2445259369"
signature = "rusEFI master.2023.10.15.f429-discovery.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.f429-discovery.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.f429-discovery.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:46 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:22 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.frankenso_na6.3018674851"
signature = "rusEFI master.2023.10.15.frankenso_na6.1518521031"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.frankenso_na6.3018674851" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.frankenso_na6.1518521031" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:28 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:00 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.harley81.302109248"
signature = "rusEFI master.2023.10.15.harley81.4218309156"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.harley81.302109248" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.harley81.4218309156" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","27 - TPS 2","INVALID","41 - PPS 1","52 - TPS 1","5 Battery Sense","INVALID","INVALID","42 - PPS 2","INVALID","53 - MAP","55 Engine Temperature","49 CLT","72 IAT","32 Oil Pressure","34 Kickstand Position Sensor"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:24 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:42 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen-112-17.3526840997"
signature = "rusEFI master.2023.10.15.hellen-112-17.995674817"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen-112-17.3526840997" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen-112-17.995674817" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","220 TPS Throttle Position 2","114 Analog Input","INVALID","121 PPS1","203 TPS Throttle Position 1","INVALID","107 TODO","119 Analog Input","110 Analog Input","INVALID","219 MAP","109 Analog Input","215 CLT","227 IAT","111 Analog Input","112 Analog Input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 01:16:30 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:07 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen-gm-e67.558695577"
signature = "rusEFI master.2023.10.15.hellen-gm-e67.3357711613"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen-gm-e67.558695577" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen-gm-e67.3357711613" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:56 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:22 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen-honda-k.1214221386"
signature = "rusEFI master.2023.10.15.hellen-honda-k.2704282670"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen-honda-k.1214221386" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen-honda-k.2704282670" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","INVALID","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:36 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:57 UTC 2023
pageSize = 24340
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 24330, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen-nb1.4269653886"
signature = "rusEFI master.2023.10.15.hellen-nb1.387065626"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen-nb1.4269653886" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen-nb1.387065626" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:53 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:18 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen121nissan.143217757"
signature = "rusEFI master.2023.10.15.hellen121nissan.3789999161"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen121nissan.143217757" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen121nissan.3789999161" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:33 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:53 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen121vag.96578986"
signature = "rusEFI master.2023.10.15.hellen121vag.3970840014"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen121vag.96578986" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen121vag.3970840014" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:30 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:49 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen128.1584215299"
signature = "rusEFI master.2023.10.15.hellen128.3070405991"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen128.1584215299" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen128.3070405991" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:27 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:46 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen154hyundai.1090304211"
signature = "rusEFI master.2023.10.15.hellen154hyundai.2844991671"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen154hyundai.1090304211" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen154hyundai.2844991671" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:39 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:00 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen72.4261131332"
signature = "rusEFI master.2023.10.15.hellen72.345254944"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen72.4261131332" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen72.345254944" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:48 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:11 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen81.1290551302"
signature = "rusEFI master.2023.10.15.hellen81.2776881250"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen81.1290551302" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen81.2776881250" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:51 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:15 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellen88bmw.2140815277"
signature = "rusEFI master.2023.10.15.hellen88bmw.2532681673"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellen88bmw.2140815277" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellen88bmw.2532681673" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:42 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:04 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellenNA6.2058497613"
signature = "rusEFI master.2023.10.15.hellenNA6.2480780841"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellenNA6.2058497613" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellenNA6.2480780841" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:59 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:25 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.hellenNA8_96.471023234"
signature = "rusEFI master.2023.10.15.hellenNA8_96.4118587110"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.hellenNA8_96.471023234" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.hellenNA8_96.4118587110" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:02 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:29 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.kin.3547231687"
signature = "rusEFI master.2023.10.15.kin.973204899"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.kin.3547231687" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.kin.973204899" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:01 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:13 UTC 2023
pageSize = 22292
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 22282, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.m74_9.2340728423"
signature = "rusEFI master.2023.10.15.m74_9.1659581955"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.m74_9.2340728423" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.m74_9.1659581955" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:20 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:50 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.mre_f4.3000130537"
signature = "rusEFI master.2023.10.15.mre_f4.1539163021"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.mre_f4.3000130537" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.mre_f4.1539163021" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:11 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:39 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.mre_f7.3000130537"
signature = "rusEFI master.2023.10.15.mre_f7.1539163021"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.mre_f7.3000130537" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.mre_f7.1539163021" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:08 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:36 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.nucleo_f429.2445259369"
signature = "rusEFI master.2023.10.15.nucleo_f429.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.nucleo_f429.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.nucleo_f429.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:48 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:25 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.nucleo_f767.2445259369"
signature = "rusEFI master.2023.10.15.nucleo_f767.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.nucleo_f767.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.nucleo_f767.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:51 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:29 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.nucleo_h743.2445259369"
signature = "rusEFI master.2023.10.15.nucleo_h743.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.nucleo_h743.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.nucleo_h743.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:54 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:32 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.prometheus_405.2703982585"
signature = "rusEFI master.2023.10.15.prometheus_405.1212475293"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.prometheus_405.2703982585" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.prometheus_405.1212475293" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:34 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:08 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.prometheus_469.2703982585"
signature = "rusEFI master.2023.10.15.prometheus_469.1212475293"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.prometheus_469.2703982585" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.prometheus_469.1212475293" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:31 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:04 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.proteus_f4.2443987987"
signature = "rusEFI master.2023.10.15.proteus_f4.2026099831"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.proteus_f4.2443987987" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.proteus_f4.2026099831" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:40 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:15 UTC 2023
pageSize = 27668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.proteus_f7.2443987987"
signature = "rusEFI master.2023.10.15.proteus_f7.2026099831"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.proteus_f7.2443987987" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.proteus_f7.2026099831" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:37 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:11 UTC 2023
pageSize = 27668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.proteus_h7.2443987987"
signature = "rusEFI master.2023.10.15.proteus_h7.2026099831"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.proteus_h7.2443987987" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.proteus_h7.2026099831" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:42 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:18 UTC 2023
pageSize = 27668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.s105.4125382453"
signature = "rusEFI master.2023.10.15.s105.478924625"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.s105.4125382453" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.s105.478924625" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:23 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:53 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.small-can.4090597713"
signature = "rusEFI master.2023.10.15.small-can.448661813"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.small-can.4090597713" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.small-can.448661813" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input","C4 - Analog/Digital Input"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:05 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:32 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.subaru_eg33_f7.2519889278"
signature = "rusEFI master.2023.10.15.subaru_eg33_f7.2136861978"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.subaru_eg33_f7.2519889278" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.subaru_eg33_f7.2136861978" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:01:03 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:18:16 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.t-b-g.2445259369"
signature = "rusEFI master.2023.10.15.t-b-g.2026908173"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.t-b-g.2445259369" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.t-b-g.2026908173" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:02:25 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:19:57 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -34,12 +34,12 @@ enable2ndByteCanID = false
[MegaTune]
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
signature = "rusEFI master.2023.10.15.tdg-pdm8.454139467"
signature = "rusEFI master.2023.10.15.tdg-pdm8.4068345391"
[TunerStudio]
queryCommand = "S"
versionInfo = "V" ; firmware version for title bar.
signature= "rusEFI master.2023.10.15.tdg-pdm8.454139467" ; signature is expected to be 7 or more characters.
signature= "rusEFI master.2023.10.15.tdg-pdm8.4068345391" ; signature is expected to be 7 or more characters.
; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
#define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6"
; CONFIG_DEFINITION_START
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:03:00 UTC 2023
; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:39 UTC 2023
pageSize = 23668
page = 1
@ -1279,7 +1279,9 @@ throttleInletPressureChannel = bits, U08, 4108, [0:5], $adc_channel_e_list
compressorDischargePressureChannel = bits, U08, 4109, [0:5], $adc_channel_e_list
dacOutputPins1 = bits, U16, 4110, [0:7], $gpio_list
dacOutputPins2 = bits, U16, 4112, [0:7], $gpio_list
mainUnusedEnd = array, U08, 4114, [250], "units", 1, 0, 0, 1, 0
speedometerOutputPin = bits, U16, 4114, [0:7], $output_pin_e_list
speedometerPulsePerKm = scalar, U16, 4116, "", 1, 0, 0, 65000, 0
mainUnusedEnd = array, U08, 4118, [246], "units", 1, 0, 0, 1, 0
etbBiasBins = array, F32, 4364, [8], "target TPS position", 1, 0, 0, 100, 0
etbBiasValues = array, F32, 4396, [8], "ETB duty cycle bias", 1, 0, -100, 100, 2
iacPidMultTable = array, U08, 4428, [8x8], "%", 0.05, 0, 0, 10, 2
@ -2219,6 +2221,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23658, [4], "RPM", 1, 0, 0, 18000, 0
compressorDischargePressureChannel = "Place the sensor after the turbocharger/supercharger, but before any intercoolers if fitted. Uses the same calibration as the MAP sensor."
dacOutputPins1 = "dacOutputPins 1"
dacOutputPins2 = "dacOutputPins 2"
speedometerPulsePerKm = "Number of speedometer pulses per kilometer travelled."
etbBiasBins = "target TPS value, 0 to 100%\nTODO: use int8 data date once we template interpolation method"
etbBiasValues = "PWM bias, 0 to 100%"
sparkDwellRpmBins = "On Single Coil or Wasted Spark setups you have to lower dwell at high RPM"

View File

@ -1,6 +1,6 @@
package com.rusefi.config.generated;
// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sat Oct 14 23:03:07 UTC 2023
// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Oct 15 16:20:48 UTC 2023
// by class com.rusefi.output.FileJavaFieldsConsumer
import com.rusefi.config.*;
@ -1034,7 +1034,6 @@ public class Fields {
public static final int SentEtbType_FORD_TYPE_1 = 2;
public static final int SentEtbType_GM_TYPE_1 = 1;
public static final int SentEtbType_NONE = 0;
public static final int SIGNATURE_HASH = 849813586;
public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin";
public static final int spi_device_e_SPI_DEVICE_1 = 1;
public static final int spi_device_e_SPI_DEVICE_2 = 2;
@ -1260,7 +1259,7 @@ public class Fields {
public static final int TS_RESPONSE_UNDERRUN = 0x80;
public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
public static final char TS_SET_LOGGER_SWITCH = 'l';
public static final String TS_SIGNATURE = "rusEFI master.2023.10.15.f407-discovery.849813586";
public static final String TS_SIGNATURE = "rusEFI master.2023.10.15.f407-discovery.3687364662";
public static final char TS_SIMULATE_CAN = '>';
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
public static final char TS_TEST_COMMAND = 't';
@ -2621,7 +2620,9 @@ public class Fields {
public static final Field COMPRESSORDISCHARGEPRESSURECHANNEL = Field.create("COMPRESSORDISCHARGEPRESSURECHANNEL", 4109, FieldType.INT8, adc_channel_e).setScale(1.0).setBaseOffset(0);
public static final Field DACOUTPUTPINS1 = Field.create("DACOUTPUTPINS1", 4110, FieldType.INT16, Gpio).setScale(1.0).setBaseOffset(0);
public static final Field DACOUTPUTPINS2 = Field.create("DACOUTPUTPINS2", 4112, FieldType.INT16, Gpio).setScale(1.0).setBaseOffset(0);
public static final Field MAINUNUSEDEND = Field.create("MAINUNUSEDEND", 4114, FieldType.INT8).setScale(1.0).setBaseOffset(0);
public static final Field SPEEDOMETEROUTPUTPIN = Field.create("SPEEDOMETEROUTPUTPIN", 4114, FieldType.INT16, output_pin_e).setScale(1.0).setBaseOffset(0);
public static final Field SPEEDOMETERPULSEPERKM = Field.create("SPEEDOMETERPULSEPERKM", 4116, FieldType.INT16).setScale(1.0).setBaseOffset(0);
public static final Field MAINUNUSEDEND = Field.create("MAINUNUSEDEND", 4118, FieldType.INT8).setScale(1.0).setBaseOffset(0);
public static final Field ETBBIASBINS = Field.create("ETBBIASBINS", 4364, FieldType.FLOAT).setBaseOffset(0);
public static final Field ETBBIASVALUES = Field.create("ETBBIASVALUES", 4396, FieldType.FLOAT).setBaseOffset(0);
public static final Field IACPIDMULTTABLE = Field.create("IACPIDMULTTABLE", 4428, FieldType.INT8).setScale(0.05).setBaseOffset(0);
@ -4171,6 +4172,8 @@ public class Fields {
COMPRESSORDISCHARGEPRESSURECHANNEL,
DACOUTPUTPINS1,
DACOUTPUTPINS2,
SPEEDOMETEROUTPUTPIN,
SPEEDOMETERPULSEPERKM,
MAINUNUSEDEND,
ETBBIASBINS,
ETBBIASVALUES,