mirror of https://github.com/rusefi/rusefi.git
reducing magic constant copy/paste & MAP dialog progress
This commit is contained in:
parent
a7f3958fd0
commit
d9bbace609
|
@ -27,6 +27,7 @@
|
|||
#define activateAuxPid4_offset 76
|
||||
#define activateAuxPid4_offset_hex 4c
|
||||
#define adc_channel_e_enum "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17", "Disabled", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
#define ADC_CHANNEL_NONE 16
|
||||
#define adcVcc_offset 548
|
||||
#define adcVcc_offset_hex 224
|
||||
#define afr_alignAf_offset 561
|
||||
|
|
|
@ -7,6 +7,8 @@
|
|||
|
||||
#pragma once
|
||||
|
||||
#include "rusefi_generated.h"
|
||||
|
||||
// todo: migrate/unify with pin_output_mode_e? rename? something is messy here
|
||||
// this enum is currently only used for SPI pins
|
||||
typedef enum __attribute__ ((__packed__)) {
|
||||
|
@ -264,7 +266,7 @@ typedef enum __attribute__ ((__packed__)) {
|
|||
EFI_ADC_15 = 15, // PC5
|
||||
|
||||
// todo: bad choice of value since now we have ADC_CHANNEL_SENSOR and could end up with 17 and 18 also
|
||||
EFI_ADC_NONE = 16,
|
||||
EFI_ADC_NONE = ADC_CHANNEL_NONE,
|
||||
EFI_ADC_ERROR = 17,
|
||||
#if EFI_UNIT_TEST
|
||||
/**
|
||||
|
|
|
@ -21,7 +21,6 @@ typedef unsigned int time_t;
|
|||
|
||||
#include "rusefi_enums.h"
|
||||
#include "firing_order.h"
|
||||
#include "rusefi_generated.h"
|
||||
|
||||
#define DEFAULT_FUEL_LOAD_COUNT 16
|
||||
#define DEFAULT_IGN_LOAD_COUNT 16
|
||||
|
|
|
@ -27,6 +27,7 @@
|
|||
#define activateAuxPid4_offset 76
|
||||
#define activateAuxPid4_offset_hex 4c
|
||||
#define adc_channel_e_enum "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "Disabled", "PB12", "PB13", "PC14", "PC15", "PC16", "PC17", "PD3", "PD4", "PE2", "PE6", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
|
||||
#define ADC_CHANNEL_NONE 16
|
||||
#define adcVcc_offset 548
|
||||
#define adcVcc_offset_hex 224
|
||||
#define afr_alignAf_offset 561
|
||||
|
|
|
@ -167,6 +167,7 @@ struct_no_prefix engine_configuration_s
|
|||
|
||||
#define TPS_TPS_ACCEL_TABLE 8
|
||||
#define MAP_ACCEL_TAPER 8
|
||||
#define ADC_CHANNEL_NONE 16
|
||||
|
||||
#define BARO_CORR_SIZE 4
|
||||
|
||||
|
|
|
@ -1384,7 +1384,7 @@ menuDialog = main
|
|||
|
||||
# MAF
|
||||
subMenu = mafSettings, "MAF sensor"
|
||||
subMenu = mafDecodingCurve, "MAF transfer function", 0, {mafAdcChannel != 16}
|
||||
subMenu = mafDecodingCurve, "MAF transfer function", 0, {mafAdcChannel != @@ADC_CHANNEL_NONE@@ }
|
||||
subMenu = std_separator
|
||||
|
||||
# O2 sensor(s)
|
||||
|
@ -1747,57 +1747,57 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
; Sensors->AUX1 Thermistor Sensor Setting
|
||||
dialog = auxTempSensor1Sensor, "aux1 Thermistor Settings"
|
||||
field = "Input channel", auxTempSensor1_adcChannel
|
||||
field = "Bias resistor", auxTempSensor1_bias_resistor, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Bias resistor", auxTempSensor1_bias_resistor, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", auxTempSensor1_tempC_1, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Resistance @ LT", auxTempSensor1_resistance_1, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Lowest temperature", auxTempSensor1_tempC_1, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ LT", auxTempSensor1_resistance_1, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Middle temperature", auxTempSensor1_tempC_2, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Resistance @ MT", auxTempSensor1_resistance_2, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Middle temperature", auxTempSensor1_tempC_2, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ MT", auxTempSensor1_resistance_2, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Highest temperature", auxTempSensor1_tempC_3, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Resistance @ HT", auxTempSensor1_resistance_3, {auxTempSensor1_adcChannel != 16}
|
||||
field = "Highest temperature", auxTempSensor1_tempC_3, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ HT", auxTempSensor1_resistance_3, {auxTempSensor1_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
; Sensors->AUX2 Thermistor Sensor Setting
|
||||
dialog = auxTempSensor2Sensor, "aux2 Thermistor Settings"
|
||||
field = "Input channel", auxTempSensor2_adcChannel
|
||||
field = "Bias resistor", auxTempSensor2_bias_resistor, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Bias resistor", auxTempSensor2_bias_resistor, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
field = "#Here is three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures is -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", auxTempSensor2_tempC_1, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Resistance @ LT", auxTempSensor2_resistance_1, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Lowest temperature", auxTempSensor2_tempC_1, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ LT", auxTempSensor2_resistance_1, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Middle temperature", auxTempSensor2_tempC_2, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Resistance @ MT", auxTempSensor2_resistance_2, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Middle temperature", auxTempSensor2_tempC_2, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ MT", auxTempSensor2_resistance_2, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Highest temperature", auxTempSensor2_tempC_3, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Resistance @ HT", auxTempSensor2_resistance_3, {auxTempSensor2_adcChannel != 16}
|
||||
field = "Highest temperature", auxTempSensor2_tempC_3, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ HT", auxTempSensor2_resistance_3, {auxTempSensor2_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = tpsNum1, "Throttle #1"
|
||||
field = "!See Tools>Calibrate TPS"
|
||||
field = "Primary sensor", tps1_1AdcChannel
|
||||
field = "Primary min", tpsMin, {tps1_1AdcChannel != 16}
|
||||
field = "Primary max", tpsMax, {tps1_1AdcChannel != 16}
|
||||
field = "Primary min", tpsMin, {tps1_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Primary max", tpsMax, {tps1_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Secondary sensor", tps1_2AdcChannel
|
||||
field = "Secondary min", tps1SecondaryMin, {tps1_2AdcChannel != 16}
|
||||
field = "Secondary max", tps1SecondaryMax, {tps1_2AdcChannel != 16}
|
||||
field = "Secondary min", tps1SecondaryMin, {tps1_2AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Secondary max", tps1SecondaryMax, {tps1_2AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = tpsNum2, "Throttle #2"
|
||||
field = "Primary sensor", tps2_1AdcChannel
|
||||
field = "Primary min", tps2Min, {tps2_1AdcChannel != 16}
|
||||
field = "Primary max", tps2Max, {tps2_1AdcChannel != 16}
|
||||
field = "Primary min", tps2Min, {tps2_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Primary max", tps2Max, {tps2_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Secondary sensor", tps2_2AdcChannel
|
||||
field = "Secondary min", tps2SecondaryMin, {tps2_2AdcChannel != 16}
|
||||
field = "Secondary max", tps2SecondaryMax, {tps2_2AdcChannel != 16}
|
||||
field = "Secondary min", tps2SecondaryMin, {tps2_2AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Secondary max", tps2SecondaryMax, {tps2_2AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = tpsLimits, "TPS Limits"
|
||||
field = "TPS minimum valid value", tpsErrorDetectionTooLow, {tps1_1AdcChannel != 16}
|
||||
field = "TPS maximum valid value", tpsErrorDetectionTooHigh, {tps1_1AdcChannel != 16}
|
||||
field = "TPS minimum valid value", tpsErrorDetectionTooLow, {tps1_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "TPS maximum valid value", tpsErrorDetectionTooHigh, {tps1_1AdcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = tpsSensor, "TPS"
|
||||
panel = tpsLimits
|
||||
|
@ -2062,21 +2062,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
; Sensors->CLT sensor
|
||||
dialog = clt_thermistor, "CLT sensor"
|
||||
field = "Input channel", clt_adcChannel
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != 16}
|
||||
field = "Bias resistor", clt_bias_resistor, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != 16}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != 16}
|
||||
field = "Lowest temperature", clt_tempC_1, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ LT", clt_resistance_1, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Middle temperature", clt_tempC_2, {clt_adcChannel != 16}
|
||||
field = "Resistance @ MT", clt_resistance_2, {clt_adcChannel != 16}
|
||||
field = "Middle temperature", clt_tempC_2, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ MT", clt_resistance_2, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Highest temperature", clt_tempC_3, {clt_adcChannel != 16}
|
||||
field = "Resistance @ HT", clt_resistance_3, {clt_adcChannel != 16}
|
||||
field = "Highest temperature", clt_tempC_3, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ HT", clt_resistance_3, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != 16}
|
||||
field = "Linear characteristic", useLinearCltSensor, {clt_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = cltGauges
|
||||
gauge = CLTGauge
|
||||
|
@ -2089,21 +2089,21 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
; Sensors->IAT sensor
|
||||
dialog = iat_thermistor, "IAT sensor"
|
||||
field = "Input channel", iat_adcChannel
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != 16}
|
||||
field = "Bias resistor", iat_bias_resistor, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
field = "#Input three pairs of thermistor temperature and resistance."
|
||||
field = "#Typical temperatures are -40 deg C, 0 deg C and 100 deg C"
|
||||
field = ""
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != 16}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != 16}
|
||||
field = "Lowest temperature", iat_tempC_1, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ LT", iat_resistance_1, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Middle temperature", iat_tempC_2, {iat_adcChannel != 16}
|
||||
field = "Resistance @ MT", iat_resistance_2, {iat_adcChannel != 16}
|
||||
field = "Middle temperature", iat_tempC_2, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ MT", iat_resistance_2, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Highest temperature", iat_tempC_3, {iat_adcChannel != 16}
|
||||
field = "Resistance @ HT", iat_resistance_3, {iat_adcChannel != 16}
|
||||
field = "Highest temperature", iat_tempC_3, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "Resistance @ HT", iat_resistance_3, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = ""
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != 16}
|
||||
field = "Linear characteristic", useLinearIatSensor, {iat_adcChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = iatGauges
|
||||
gauge = IATGauge
|
||||
|
@ -2116,10 +2116,10 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
; Sensors->Oil pressure sensor
|
||||
dialog = oilp_settings, "Oil Pressure Sensor"
|
||||
field = "Oil Pressure ADC input", oilPressure_hwChannel
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != 16}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != 16}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != 16}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != 16}
|
||||
field = "low voltage", oilPressure_v1, {oilPressure_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "low pressure", oilPressure_value1, {oilPressure_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high voltage", oilPressure_v2, {oilPressure_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
field = "high pressure", oilPressure_value2, {oilPressure_hwChannel != @@ADC_CHANNEL_NONE@@}
|
||||
|
||||
dialog = oilPressureGauges
|
||||
gauge = OilPressGauge
|
||||
|
@ -2132,11 +2132,11 @@ cmd_set_engine_type_default = "w\x00\x31\x00\x00"
|
|||
; Sensors->MAP sensor
|
||||
dialog = mapSensorAnalog, "MAP sensor", yAxis
|
||||
field = "MAP ADC input", map_sensor_hwChannel
|
||||
field = "MAP type", map_sensor_type
|
||||
field = "MAP value low point", map_sensor_lowValue
|
||||
field = "MAP voltage low point", mapLowValueVoltage
|
||||
field = "MAP value high point", map_sensor_highValue
|
||||
field = "MAP voltage high value", mapHighValueVoltage
|
||||
field = "MAP type", map_sensor_type, { map_sensor_hwChannel != @@ADC_CHANNEL_NONE@@ }
|
||||
field = "MAP value low point", map_sensor_lowValue, { map_sensor_hwChannel != @@ADC_CHANNEL_NONE@@ && map_sensor_type == 0 }
|
||||
field = "MAP voltage low point", mapLowValueVoltage, { map_sensor_hwChannel != @@ADC_CHANNEL_NONE@@ && map_sensor_type == 0 }
|
||||
field = "MAP value high point", map_sensor_highValue,{ map_sensor_hwChannel != @@ADC_CHANNEL_NONE@@ && map_sensor_type == 0 }
|
||||
field = "MAP voltage high value", mapHighValueVoltage, { map_sensor_hwChannel != @@ADC_CHANNEL_NONE@@ && map_sensor_type == 0 }
|
||||
|
||||
dialog = mapSensorFreq, "MAP frequency sensor", yAxis
|
||||
field = "MAP Freq", frequencyReportingMapInputPin
|
||||
|
|
Loading…
Reference in New Issue