rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Openblt (#3430) 

* Makefile: define BOOTLOADER=1 for linker in case of OpenBLT too

This will reserve first 32K of flash for bootloader.

* OpenBLT: include into build

* board: subaru eg33: add OpenBLT board code

* board: subaru eg33: use OpenBLT

* Board: Subaru EG33: OpenBLT: reuse HAL and CMSIS from OpenBLT submodule

* Board: Subaru EG33: OpenBLT: reuse linker file from OpenBLT too

* OpenBLT for MRE

* OpenBLT: MRE: adjust LD memory map for smallest variat of MCU on MRE

* OpenBLT: enable for MRE

* OpenBLT: disable CRC check of user application

This allows us to use DFU tool to flash main application too.

* hex2dfu: fresh binary for linux

* OpenBLT: extract common part of OpenBLT makefiles to openblt.mk

* OpenBLT: enable CRC check of user application for MRE and EG33

CRC (actually just a summ) of few first vectors is stored at 0x1c
offset. This is reserved vector for Cortex-M3, M4 and M7

* common_make: append OpenBLT CRC to dfu files

This should allow to use DFU to do main application update when
when OpenBLT is used as bootloader. hex2dfu will store same
styled CRC as OpenBLT expects to see in user app.

* OpenBLT reorganization

Move common stuff to hw_layer/ports/

* OpenBLT: proteus

* Proteus: enable OpenBLT for F4 and F7

Compilation tested only
This commit is contained in:
Andrey G 2021-11-06 02:28:55 +03:00 committed by GitHub
parent eb781f38b4
commit e3be563b27
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
41 changed files with 7299 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
firmware/Makefile
View File

@ -3,6 +3,8 @@
# see setup_linux_environment.sh but Windows is also totally fine
#
.PHONY: openblt
CHIBIOS = ChibiOS
RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
RULESFILE = $(RULESPATH)/rules.mk
@ -101,6 +103,10 @@ ifeq ($(USE_BOOTLOADER),)
USE_BOOTLOADER = no
endif
ifeq ($(USE_OPENBLT),)
USE_OPENBLT = no
endif
ifeq ($(USE_FATFS),)
USE_FATFS = yes
endif
@ -204,6 +210,11 @@ ifeq ($(USE_BOOTLOADER),yes)
include $(PROJECT_DIR)/bootloader/bootloader.mk
endif
ifeq ($(USE_OPENBLT),yes)
# Reserve start of flash for OpenBLT
USE_OPT += -Wl,--defsym=BOOTLOADER=1
endif
$(info PROJECT_BOARD: $(PROJECT_BOARD))
$(info PROJECT_CPU: $(PROJECT_CPU))
$(info CONFDIR: $(CONFDIR))
@ -389,5 +400,11 @@ ULIBS = -lm --specs=nano.specs
include $(RULESFILE)
openblt:
make -f $(PROJECT_DIR)/openblt.mk
openblt_clean:
make -f $(PROJECT_DIR)/openblt.mk clean
# Enable precompiled header
include rusefi_pch.mk

21
firmware/config/boards/common_make.sh
View File

@ -9,6 +9,10 @@ mkdir .dep
# todo: start using env variable for number of threads or for '-r'
make -j$(nproc) -r
[ -e build/rusefi.hex ] || { echo "FAILED to compile by $SCRIPT_NAME with $PROJECT_BOARD $DEBUG_LEVEL_OPT and $EXTRA_PARAMS"; exit 1; }
if [ $USE_OPENBLT = "yes" ]; then
make openblt
[ -e build-openblt/openblt_$PROJECT_BOARD.hex ] || { echo "FAILED to compile OpneBLT by $SCRIPT_NAME with $PROJECT_BOARD"; exit 1; }
fi
if uname | grep "NT"; then
HEX2DFU=../misc/encedo_hex2dfu/hex2dfu.exe
@ -21,13 +25,28 @@ mkdir -p deliver
rm -f deliver/rusefi.dfu
echo "$SCRIPT_NAME: invoking hex2dfu for RusEFI"
$HEX2DFU -i build/rusefi.hex -o deliver/rusefi.dfu
$HEX2DFU -i build/rusefi.hex -C 0x1C -o deliver/rusefi.dfu
# rusEFI console does not use .hex files but for Cypress that's the primary binary format
cp build/rusefi.hex deliver/
cp build/rusefi.bin deliver/
cp build/rusefi.srec deliver/
# bootloader
if [ $USE_OPENBLT = "yes" ]; then
rm -f deliver/openblt_$PROJECT_BOARD.dfu
echo "$SCRIPT_NAME: invoking hex2dfu for OpenBLT"
$HEX2DFU -i build-openblt/openblt_$PROJECT_BOARD.hex -o deliver/openblt_$PROJECT_BOARD.dfu
cp build-openblt/openblt_$PROJECT_BOARD.hex deliver/
cp build-openblt/openblt_$PROJECT_BOARD.bin deliver/
cp build-openblt/openblt_$PROJECT_BOARD.srec deliver/
rm -f deliver/rusefi_openblt.dfu
echo "$SCRIPT_NAME: invoking hex2dfu for composite RusEFI+OpenBLT image"
$HEX2DFU -i build-openblt/openblt_$PROJECT_BOARD.hex -i build/rusefi.hex -C 0x1C -o deliver/rusefi_openblt.dfu
fi
echo "$SCRIPT_NAME: build folder content:"
ls -l build

2
firmware/config/boards/microrusefi/compile_mre_f4.sh
View File

@ -6,4 +6,6 @@ export EXTRA_PARAMS="-DSHORT_BOARD_NAME=mre_f4"
# export DEBUG_LEVEL_OPT="-O0 -ggdb -g"
export USE_OPENBLT=yes
bash ../common_make.sh

190
firmware/config/boards/microrusefi/openblt/blt_conf.h Normal file
View File

@ -0,0 +1,190 @@
/************************************************************************************//**
* \file config/boards/microrusefi/openblt/blt_conf.h
* \brief Bootloader configuration header file for RusEFI MicroRusEFI board
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Andrey Gusakov https://rusefi.com/
* Based on file:
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef BLT_CONF_H
#define BLT_CONF_H
/****************************************************************************************
* C P U D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* To properly initialize the baudrate clocks of the communication interface, typically
* the speed of the crystal oscillator and/or the speed at which the system runs is
* needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and
* BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is
* not dependent on the targets architecture, the byte ordering needs to be known.
* Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects
* little endian mode.
*
* Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be
* called the moment the user program is about to be started. This could be used to
* de-initialize application specific parts, for example to stop blinking an LED, etc.
*/
/** \brief Frequency of the external crystal oscillator. */
#define BOOT_CPU_XTAL_SPEED_KHZ (8000)
/** \brief Desired system speed. */
#define BOOT_CPU_SYSTEM_SPEED_KHZ (168000)
/** \brief Motorola or Intel style byte ordering. */
#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0)
/** \brief Enable/disable hook function call right before user program start. */
#define BOOT_CPU_USER_PROGRAM_START_HOOK (1)
/****************************************************************************************
* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N
****************************************************************************************/
/* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE
* configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed
* in bits/second. Two CAN messages are reserved for communication with the host. The
* message identifier for sending data from the target to the host is configured with
* BOOT_COM_CAN_TXMSG_ID. The one for receiving data from the host is configured with
* BOOT_COM_CAN_RXMSG_ID. Note that an extended 29-bit CAN identifier is configured by
* OR-ing with mask 0x80000000. The maximum amount of data bytes in a message for data
* transmission and reception is set through BOOT_COM_CAN_TX_MAX_DATA and
* BOOT_COM_CAN_RX_MAX_DATA, respectively. It is common for a microcontroller to have more
* than 1 CAN controller on board. The zero-based BOOT_COM_CAN_CHANNEL_INDEX selects the
* CAN controller channel.
*
*/
/** \brief Enable/disable CAN transport layer. */
#define BOOT_COM_CAN_ENABLE (1)
/** \brief Configure the desired CAN baudrate. */
#define BOOT_COM_CAN_BAUDRATE (500000)
/** \brief Configure CAN message ID target->host. */
#define BOOT_COM_CAN_TX_MSG_ID (0x7E1 /*| 0x80000000*/)
/** \brief Configure number of bytes in the target->host CAN message. */
#define BOOT_COM_CAN_TX_MAX_DATA (8)
/** \brief Configure CAN message ID host->target. */
#define BOOT_COM_CAN_RX_MSG_ID (0x667 /*| 0x80000000*/)
/** \brief Configure number of bytes in the host->target CAN message. */
#define BOOT_COM_CAN_RX_MAX_DATA (8)
/** \brief Select the desired CAN peripheral as a zero based index. */
#define BOOT_COM_CAN_CHANNEL_INDEX (1)
/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE
* configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed
* in bits/second. The maximum amount of data bytes in a message for data transmission
* and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA,
* respectively. It is common for a microcontroller to have more than 1 UART interface
* on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface.
*
*/
/** \brief Enable/disable UART transport layer. */
#define BOOT_COM_RS232_ENABLE (1)
/** \brief Configure the desired communication speed. */
#define BOOT_COM_RS232_BAUDRATE (115200)
/** \brief Configure number of bytes in the target->host data packet. */
#define BOOT_COM_RS232_TX_MAX_DATA (64)
/** \brief Configure number of bytes in the host->target data packet. */
#define BOOT_COM_RS232_RX_MAX_DATA (64)
/** \brief Select the desired UART peripheral as a zero based index. */
#define BOOT_COM_RS232_CHANNEL_INDEX (2)
/****************************************************************************************
* B A C K D O O R E N T R Y C O N F I G U R A T I O N
****************************************************************************************/
/* It is possible to implement an application specific method to force the bootloader to
* stay active after a reset. Such a backdoor entry into the bootloader is desired in
* situations where the user program does not run properly and therefore cannot
* reactivate the bootloader. By enabling these hook functions, the application can
* implement the backdoor, which overrides the default backdoor entry that is programmed
* into the bootloader. When desired for security purposes, these hook functions can
* also be implemented in a way that disables the backdoor entry altogether.
*/
/** \brief Enable/disable the backdoor override hook functions. */
#define BOOT_BACKDOOR_HOOKS_ENABLE (0)
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The NVM driver typically supports erase and program operations of the internal memory
* present on the microcontroller. Through these hook functions the NVM driver can be
* extended to support additional memory types such as external flash memory and serial
* eeproms. The size of the internal memory in kilobytes is specified with configurable
* BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can
* be overridden with a application specific method by enabling configuration switch
* BOOT_NVM_CHECKSUM_HOOKS_ENABLE.
*/
/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */
#define BOOT_NVM_HOOKS_ENABLE (0)
/** \brief Configure the size of the default memory device (typically flash EEPROM). */
#define BOOT_NVM_SIZE_KB (2048)
/** \brief Enable/disable hooks functions to override the user program checksum handling. */
#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0)
/****************************************************************************************
* F L A S H M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/** \brief Enable support for a custom flash layout table. It is located in
* flash_layout.c. This was done because the default flashLayout[] table
* in the bootloader's core defines flash map for single bank mode.
* RusEFI uses dual bank mode.
*/
#define BOOT_FLASH_CUSTOM_LAYOUT_ENABLE (1)
/** \brief Use one of 'reserved' IRQ vectors at the beginig on vector table.
*/
#define BOOT_FLASH_VECTOR_TABLE_CS_OFFSET (0x1C)
/****************************************************************************************
* W A T C H D O G D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The COP driver cannot be configured internally in the bootloader, because its use
* and configuration is application specific. The bootloader does need to service the
* watchdog in case it is used. When the application requires the use of a watchdog,
* set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through
* hook functions.
*/
/** \brief Enable/disable the hook functions for controlling the watchdog. */
#define BOOT_COP_HOOKS_ENABLE (1)
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N
****************************************************************************************/
/* A security mechanism can be enabled in the bootloader's XCP module by setting configu-
* rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming
* operations can be performed, access to this resource need to be unlocked.
* In the Microboot settings on tab "XCP Protection" you need to specify a DLL that
* implements the unlocking algorithm. The demo programs are configured for the (simple)
* algorithm in "libseednkey.dll". The source code for this DLL is available so it can be
* customized to your needs.
* During the unlock sequence, Microboot requests a seed from the bootloader, which is in
* the format of a byte array. Using this seed the unlock algorithm in the DLL computes
* a key, which is also a byte array, and sends this back to the bootloader. The
* bootloader then verifies this key to determine if programming and erase operations are
* permitted.
* After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook()
* are called by the bootloader to obtain the seed and to verify the key, respectively.
*/
#define BOOT_XCP_SEED_KEY_ENABLE (0)
#endif /* BLT_CONF_H */
/*********************************** end of blt_conf.h *********************************/

16
firmware/config/boards/microrusefi/openblt/board.mk Normal file
View File

@ -0,0 +1,16 @@
#|--------------------------------------------------------------------------------------|
#| Collect project files |
#|--------------------------------------------------------------------------------------|
# Collect all application files in the current directory and its subdirectories, but
# exclude flash-layout.c as this one is directly included in a source file, when used.
PROJ_FILES += $(filter-out $(OPENBLT_BOARD_DIR)/flash_layout.c, $(call rwildcard, $(OPENBLT_BOARD_DIR), *.c *.h *.s))
#|--------------------------------------------------------------------------------------|
#| Options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
BRDFLAGS = -DSTM32F429xx -DHSE_VALUE=8000000
#|--------------------------------------------------------------------------------------|
#| Specify library files |
#|--------------------------------------------------------------------------------------|
LIBS =

28
firmware/config/boards/microrusefi/openblt/flash_layout.c Normal file
View File

@ -0,0 +1,28 @@
/* Define STM32F427 flash layout in dual bank mode. Only first bank is defined */
static const tFlashSector flashLayout[] =
{
/* space is reserved for a bootloader configuration with all supported communication
* interfaces enabled. when for example only UART is needed, then the space required
* for the bootloader can be made a lot smaller here.
*/
/* { 0x08000000, 0x04000, 0 }, flash sector 0 - reserved for bootloader */
/* { 0x08004000, 0x04000, 1 }, flash sector 1 - reserved for bootloader */
{ 0x08008000, 0x08000, 2}, /* flash sector 2 - 16kb */
{ 0x0800c000, 0x08000, 3}, /* flash sector 3 - 16kb */
{ 0x08010000, 0x10000, 4}, /* flash sector 4 - 64kb */
{ 0x08020000, 0x20000, 5}, /* flash sector 5 - 128kb */
{ 0x08040000, 0x20000, 6}, /* flash sector 6 - 128kb */
{ 0x08060000, 0x20000, 7}, /* flash sector 7 - 128kb */
#if (BOOT_NVM_SIZE_KB > 1024)
{ 0x08080000, 0x20000, 8}, /* flash sector 8 - 128kb */
{ 0x080a0000, 0x20000, 9}, /* flash sector 9 - 128kb */
{ 0x080c0000, 0x20000, 10}, /* flash sector 10 - 128kb */
{ 0x080e0000, 0x20000, 11}, /* flash sector 11 - 128kb */
#endif
/* Bank #2 is not defined */
#if (BOOT_NVM_SIZE_KB > 2048)
#error "BOOT_NVM_SIZE_KB > 2048 is currently not supported."
#endif
};

351
firmware/config/boards/microrusefi/openblt/hooks.c Normal file
View File

@ -0,0 +1,351 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/hooks.c
* \brief Bootloader callback source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* LED driver header */
#include "stm32f4xx.h" /* STM32 registers and drivers */
/****************************************************************************************
* B A C K D O O R E N T R Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Initializes the backdoor entry option.
** \return none.
**
****************************************************************************************/
void BackDoorInitHook(void)
{
} /*** end of BackDoorInitHook ***/
/************************************************************************************//**
** \brief Checks if a backdoor entry is requested.
** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool BackDoorEntryHook(void)
{
/* default implementation always activates the bootloader after a reset */
return BLT_TRUE;
} /*** end of BackDoorEntryHook ***/
#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */
/****************************************************************************************
* C P U D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0)
/************************************************************************************//**
** \brief Callback that gets called when the bootloader is about to exit and
** hand over control to the user program. This is the last moment that
** some final checking can be performed and if necessary prevent the
** bootloader from activiting the user program.
** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep
** keep the bootloader active.
**
****************************************************************************************/
blt_bool CpuUserProgramStartHook(void)
{
/* additional and optional backdoor entry through the pushbutton on the board. to
* force the bootloader to stay active after reset, keep the pushbutton pressed while
* resetting the microcontroller.
*/
if (HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_13) == GPIO_PIN_SET)
{
/* pushbutton pressed, so do not start the user program and keep the
* bootloader active instead.
*/
return BLT_FALSE;
}
/* clean up the LED driver */
LedBlinkExit();
/* okay to start the user program */
return BLT_TRUE;
} /*** end of CpuUserProgramStartHook ***/
#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */
/****************************************************************************************
* W A T C H D O G D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COP_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** initialization routine. It can be used to configure and enable the
** watchdog.
** \return none.
**
****************************************************************************************/
void CopInitHook(void)
{
/* this function is called upon initialization. might as well use it to initialize
* the LED driver. It is kind of a visual watchdog anyways.
*/
LedBlinkInit(100);
} /*** end of CopInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** service routine. This gets called upon initialization and during
** potential long lasting loops and routine. It can be used to service
** the watchdog to prevent a watchdog reset.
** \return none.
**
****************************************************************************************/
void CopServiceHook(void)
{
/* run the LED blink task. this is a better place to do it than in the main() program
* loop. certain operations such as flash erase can take a long time, which would cause
* a blink interval to be skipped. this function is also called during such operations,
* so no blink intervals will be skipped when calling the LED blink task here.
*/
LedBlinkTask();
} /*** end of CopServiceHook ***/
#endif /* BOOT_COP_HOOKS_ENABLE > 0 */
/****************************************************************************************
* U S B C O M M U N I C A T I O N I N T E R F A C E H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COM_USB_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called whenever the USB device should be connected
** to the USB bus.
** \param connect BLT_TRUE to connect and BLT_FALSE to disconnect.
** \return none.
**
****************************************************************************************/
void UsbConnectHook(blt_bool connect)
{
/* Note that this is handled automatically by the OTG peripheral. */
} /*** end of UsbConnect ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device
** to enter a low power mode.
** \return none.
**
****************************************************************************************/
void UsbEnterLowPowerModeHook(void)
{
/* support to enter a low power mode can be implemented here */
} /*** end of UsbEnterLowPowerMode ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device to
** exit low power mode.
** \return none.
**
****************************************************************************************/
void UsbLeaveLowPowerModeHook(void)
{
/* support to leave a low power mode can be implemented here */
} /*** end of UsbLeaveLowPowerMode ***/
#endif /* BOOT_COM_USB_ENABLE > 0 */
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_NVM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the start of the internal NVM driver
** initialization routine.
** \return none.
**
****************************************************************************************/
void NvmInitHook(void)
{
} /*** end of NvmInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of a firmware update to reinitialize
** the NVM driver.
** \return none.
**
****************************************************************************************/
void NvmReinitHook(void)
{
} /*** end of NvmReinitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver write
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't
** been written yet.
** \param addr Start address.
** \param len Length in bytes.
** \param data Pointer to the data buffer.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the write
** operation failed.
**
****************************************************************************************/
blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmWriteHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver erase
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory
** hasn't been erased yet.
** \param addr Start address.
** \param len Length in bytes.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the erase
** operation failed.
**
****************************************************************************************/
blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmEraseHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the NVM programming session.
** \return BLT_TRUE is successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmDoneHook(void)
{
return BLT_TRUE;
} /*** end of NvmDoneHook ***/
#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */
#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Verifies the checksum, which indicates that a valid user program is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmVerifyChecksumHook(void)
{
return BLT_TRUE;
} /*** end of NvmVerifyChecksum ***/
/************************************************************************************//**
** \brief Writes a checksum of the user program to non-volatile memory. This is
** performed once the entire user program has been programmed. Through
** the checksum, the bootloader can check if a valid user programming is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmWriteChecksumHook(void)
{
return BLT_TRUE;
}
#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_XCP_SEED_KEY_ENABLE > 0)
/************************************************************************************//**
** \brief Provides a seed to the XCP master that will be used for the key
** generation when the master attempts to unlock the specified resource.
** Called by the GET_SEED command.
** \param resource Resource that the seed if requested for (XCP_RES_XXX).
** \param seed Pointer to byte buffer wher the seed will be stored.
** \return Length of the seed in bytes.
**
****************************************************************************************/
blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed)
{
/* request seed for unlocking ProGraMming resource */
if ((resource & XCP_RES_PGM) != 0)
{
seed[0] = 0x55;
}
/* return seed length */
return 1;
} /*** end of XcpGetSeedHook ***/
/************************************************************************************//**
** \brief Called by the UNLOCK command and checks if the key to unlock the
** specified resource was correct. If so, then the resource protection
** will be removed.
** \param resource resource to unlock (XCP_RES_XXX).
** \param key pointer to the byte buffer holding the key.
** \param len length of the key in bytes.
** \return 1 if the key was correct, 0 otherwise.
**
****************************************************************************************/
blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len)
{
/* suppress compiler warning for unused parameter */
len = len;
/* the example key algorithm in "libseednkey.dll" works as follows:
* - PGM will be unlocked if key = seed - 1
*/
/* check key for unlocking ProGraMming resource */
if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1)))
{
/* correct key received for unlocking PGM resource */
return 1;
}
/* still here so key incorrect */
return 0;
} /*** end of XcpVerifyKeyHook ***/
#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */
/*********************************** end of hooks.c ************************************/

100
firmware/config/boards/microrusefi/openblt/led.c Normal file
View File

@ -0,0 +1,100 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Bootled.c
* \brief LED driver source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* module header */
#include "stm32f4xx.h" /* STM32 registers and drivers */
/****************************************************************************************
* Local data declarations
****************************************************************************************/
/** \brief Holds the desired LED blink interval time. */
static blt_int16u ledBlinkIntervalMs;
/************************************************************************************//**
** \brief Initializes the LED blink driver.
** \param interval_ms Specifies the desired LED blink interval time in milliseconds.
** \return none.
**
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms)
{
/* store the interval time between LED toggles */
ledBlinkIntervalMs = interval_ms;
} /*** end of LedBlinkInit ***/
/************************************************************************************//**
** \brief Task function for blinking the LED as a fixed timer interval.
** \return none.
**
****************************************************************************************/
void LedBlinkTask(void)
{
static blt_bool ledOn = BLT_FALSE;
static blt_int32u nextBlinkEvent = 0;
/* check for blink event */
if (TimerGet() >= nextBlinkEvent)
{
/* toggle the LED state */
if (ledOn == BLT_FALSE)
{
ledOn = BLT_TRUE;
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET);
}
else
{
ledOn = BLT_FALSE;
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
}
/* schedule the next blink event */
nextBlinkEvent = TimerGet() + ledBlinkIntervalMs;
}
} /*** end of LedBlinkTask ***/
/************************************************************************************//**
** \brief Cleans up the LED blink driver. This is intended to be used upon program
** exit.
** \return none.
**
****************************************************************************************/
void LedBlinkExit(void)
{
/* turn the LED off */
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
} /*** end of LedBlinkExit ***/
/*********************************** end of led.c **************************************/

40
firmware/config/boards/microrusefi/openblt/led.h Normal file
View File

@ -0,0 +1,40 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/led.h
* \brief LED driver header file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef LED_H
#define LED_H
/****************************************************************************************
* Function prototypes
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms);
void LedBlinkTask(void);
void LedBlinkExit(void);
#endif /* LED_H */
/*********************************** end of led.h **************************************/

290
firmware/config/boards/microrusefi/openblt/main.c Normal file
View File

@ -0,0 +1,290 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/main.c
* \brief Bootloader application source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "stm32f4xx.h" /* STM32 CPU and HAL header */
/****************************************************************************************
* Function prototypes
****************************************************************************************/
static void Init(void);
static void SystemClock_Config(void);
/************************************************************************************//**
** \brief This is the entry point for the bootloader application and is called
** by the reset interrupt vector after the C-startup routines executed.
** \return Program return code.
**
****************************************************************************************/
int main(void)
{
/* initialize the microcontroller */
Init();
/* initialize the bootloader */
BootInit();
/* start the infinite program loop */
while (1)
{
/* run the bootloader task */
BootTask();
}
/* program should never get here */
return 0;
} /*** end of main ***/
/************************************************************************************//**
** \brief Interrupt service routine of the timer.
** \return none.
**
****************************************************************************************/
void SysTick_Handler(void)
{
/* Increment the tick counter. */
HAL_IncTick();
/* Invoke the system tick handler. */
HAL_SYSTICK_IRQHandler();
} /*** end of TimerISRHandler ***/
/************************************************************************************//**
** \brief Initializes the microcontroller.
** \return none.
**
****************************************************************************************/
static void Init(void)
{
/* HAL library initialization */
HAL_Init();
/* configure system clock */
SystemClock_Config();
} /*** end of Init ***/
/************************************************************************************//**
** \brief System Clock Configuration. This code was created by CubeMX and configures
** the system clock to match the configuration in the bootloader's
** configuration (blt_conf.h), specifically the macros:
** BOOT_CPU_SYSTEM_SPEED_KHZ and BOOT_CPU_XTAL_SPEED_KHZ.
** Note that the Lower Layer drivers were selected in CubeMX for the RCC
** subsystem.
** \return none.
**
****************************************************************************************/
static void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/* Configure the main internal regulator output voltage. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
/* Initializes the CPU, AHB and APB buses clocks. */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
} /*** end of SystemClock_Config ***/
/************************************************************************************//**
** \brief Initializes the Global MSP. This function is called from HAL_Init()
** function to perform system level initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Power and SYSCFG clock enable. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* GPIO ports clock enable. */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
/* Configure PE3 pin for the LED. */
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET);
#if 0
/* Configure GPIO pin for (optional) backdoor entry input. */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* UART TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_10 | GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* UART clock enable. */
__HAL_RCC_USART3_CLK_ENABLE();
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* CAN TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_CAN2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* CAN clock enable. */
/* CAN1 clock needs to be enabled for CAN2 operation */
__HAL_RCC_CAN1_CLK_ENABLE();
__HAL_RCC_CAN2_CLK_ENABLE();
#endif
#if (BOOT_COM_USB_ENABLE > 0)
/* USB pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USB clock enable. */
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
#endif
} /*** end of HAL_MspInit ***/
/************************************************************************************//**
** \brief DeInitializes the Global MSP. This function is called from HAL_DeInit()
** function to perform system level de-initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspDeInit(void)
{
/* Reset the RCC clock configuration to the default reset state. */
HAL_RCC_DeInit();
/* Reset GPIO pin for the LED to turn it off. */
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3);
#if 0
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_13);
#endif
#if (BOOT_COM_USB_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_12);
/* USB clock disable. */
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12);
/* CAN clock disable. */
__HAL_RCC_CAN2_CLK_DISABLE();
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11);
/* UART clock disable. */
__HAL_RCC_USART3_CLK_DISABLE();
#endif
/* GPIO ports clock disable. */
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOA_CLK_DISABLE();
/* SYSCFG and PWR clock disable. */
__HAL_RCC_PWR_CLK_DISABLE();
__HAL_RCC_SYSCFG_CLK_DISABLE();
} /*** end of HAL_MspDeInit ***/
/*********************************** end of main.c *************************************/

543
firmware/config/boards/microrusefi/openblt/startup_stm32f429xx.s Normal file
View File

@ -0,0 +1,543 @@
/**
******************************************************************************
* @file startup_stm32f429xx.s
* @author MCD Application Team
* @brief STM32F429xx Devices vector table for GCC based toolchains.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word CAN1_TX_IRQHandler /* CAN1 TX */
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDIO_IRQHandler /* SDIO */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word CAN2_TX_IRQHandler /* CAN2 TX */
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
.word OTG_FS_IRQHandler /* USB OTG FS */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_IRQHandler /* DCMI */
.word 0 /* Reserved */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC_IRQHandler */
.word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */
.word DMA2D_IRQHandler /* DMA2D */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_IRQHandler
.thumb_set DCMI_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2
firmware/config/boards/proteus/compile_proteus_f4.sh
View File

@ -4,4 +4,6 @@ export PROJECT_BOARD=proteus
export PROJECT_CPU=ARCH_STM32F4
export EXTRA_PARAMS=-DSHORT_BOARD_NAME=proteus_f4
export USE_OPENBLT=yes
bash ../common_make.sh

2
firmware/config/boards/proteus/compile_proteus_f7.sh
View File

@ -4,4 +4,6 @@ export PROJECT_BOARD=proteus
export PROJECT_CPU=ARCH_STM32F7
export EXTRA_PARAMS=-DSHORT_BOARD_NAME=proteus_f7
export USE_OPENBLT=yes
bash ../common_make.sh

190
firmware/config/boards/proteus/openblt/blt_conf.h Normal file
View File

@ -0,0 +1,190 @@
/************************************************************************************//**
* \file config/boards/microrusefi/openblt/blt_conf.h
* \brief Bootloader configuration header file for RusEFI MicroRusEFI board
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Andrey Gusakov https://rusefi.com/
* Based on file:
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef BLT_CONF_H
#define BLT_CONF_H
/****************************************************************************************
* C P U D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* To properly initialize the baudrate clocks of the communication interface, typically
* the speed of the crystal oscillator and/or the speed at which the system runs is
* needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and
* BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is
* not dependent on the targets architecture, the byte ordering needs to be known.
* Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects
* little endian mode.
*
* Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be
* called the moment the user program is about to be started. This could be used to
* de-initialize application specific parts, for example to stop blinking an LED, etc.
*/
/** \brief Frequency of the external crystal oscillator. */
#define BOOT_CPU_XTAL_SPEED_KHZ (8000)
/** \brief Desired system speed. */
#define BOOT_CPU_SYSTEM_SPEED_KHZ (168000)
/** \brief Motorola or Intel style byte ordering. */
#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0)
/** \brief Enable/disable hook function call right before user program start. */
#define BOOT_CPU_USER_PROGRAM_START_HOOK (1)
/****************************************************************************************
* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N
****************************************************************************************/
/* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE
* configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed
* in bits/second. Two CAN messages are reserved for communication with the host. The
* message identifier for sending data from the target to the host is configured with
* BOOT_COM_CAN_TXMSG_ID. The one for receiving data from the host is configured with
* BOOT_COM_CAN_RXMSG_ID. Note that an extended 29-bit CAN identifier is configured by
* OR-ing with mask 0x80000000. The maximum amount of data bytes in a message for data
* transmission and reception is set through BOOT_COM_CAN_TX_MAX_DATA and
* BOOT_COM_CAN_RX_MAX_DATA, respectively. It is common for a microcontroller to have more
* than 1 CAN controller on board. The zero-based BOOT_COM_CAN_CHANNEL_INDEX selects the
* CAN controller channel.
*
*/
/** \brief Enable/disable CAN transport layer. */
#define BOOT_COM_CAN_ENABLE (1)
/** \brief Configure the desired CAN baudrate. */
#define BOOT_COM_CAN_BAUDRATE (500000)
/** \brief Configure CAN message ID target->host. */
#define BOOT_COM_CAN_TX_MSG_ID (0x7E1 /*| 0x80000000*/)
/** \brief Configure number of bytes in the target->host CAN message. */
#define BOOT_COM_CAN_TX_MAX_DATA (8)
/** \brief Configure CAN message ID host->target. */
#define BOOT_COM_CAN_RX_MSG_ID (0x667 /*| 0x80000000*/)
/** \brief Configure number of bytes in the host->target CAN message. */
#define BOOT_COM_CAN_RX_MAX_DATA (8)
/** \brief Select the desired CAN peripheral as a zero based index. */
#define BOOT_COM_CAN_CHANNEL_INDEX (0)
/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE
* configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed
* in bits/second. The maximum amount of data bytes in a message for data transmission
* and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA,
* respectively. It is common for a microcontroller to have more than 1 UART interface
* on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface.
*
*/
/** \brief Enable/disable UART transport layer. */
#define BOOT_COM_RS232_ENABLE (1)
/** \brief Configure the desired communication speed. */
#define BOOT_COM_RS232_BAUDRATE (115200)
/** \brief Configure number of bytes in the target->host data packet. */
#define BOOT_COM_RS232_TX_MAX_DATA (64)
/** \brief Configure number of bytes in the host->target data packet. */
#define BOOT_COM_RS232_RX_MAX_DATA (64)
/** \brief Select the desired UART peripheral as a zero based index. */
#define BOOT_COM_RS232_CHANNEL_INDEX (2)
/****************************************************************************************
* B A C K D O O R E N T R Y C O N F I G U R A T I O N
****************************************************************************************/
/* It is possible to implement an application specific method to force the bootloader to
* stay active after a reset. Such a backdoor entry into the bootloader is desired in
* situations where the user program does not run properly and therefore cannot
* reactivate the bootloader. By enabling these hook functions, the application can
* implement the backdoor, which overrides the default backdoor entry that is programmed
* into the bootloader. When desired for security purposes, these hook functions can
* also be implemented in a way that disables the backdoor entry altogether.
*/
/** \brief Enable/disable the backdoor override hook functions. */
#define BOOT_BACKDOOR_HOOKS_ENABLE (0)
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The NVM driver typically supports erase and program operations of the internal memory
* present on the microcontroller. Through these hook functions the NVM driver can be
* extended to support additional memory types such as external flash memory and serial
* eeproms. The size of the internal memory in kilobytes is specified with configurable
* BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can
* be overridden with a application specific method by enabling configuration switch
* BOOT_NVM_CHECKSUM_HOOKS_ENABLE.
*/
/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */
#define BOOT_NVM_HOOKS_ENABLE (0)
/** \brief Configure the size of the default memory device (typically flash EEPROM). */
#define BOOT_NVM_SIZE_KB (2048)
/** \brief Enable/disable hooks functions to override the user program checksum handling. */
#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0)
/****************************************************************************************
* F L A S H M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/** \brief Enable support for a custom flash layout table. It is located in
* flash_layout.c. This was done because the default flashLayout[] table
* in the bootloader's core defines flash map for single bank mode.
* RusEFI uses dual bank mode.
*/
#define BOOT_FLASH_CUSTOM_LAYOUT_ENABLE (1)
/** \brief Use one of 'reserved' IRQ vectors at the beginig on vector table.
*/
#define BOOT_FLASH_VECTOR_TABLE_CS_OFFSET (0x1C)
/****************************************************************************************
* W A T C H D O G D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The COP driver cannot be configured internally in the bootloader, because its use
* and configuration is application specific. The bootloader does need to service the
* watchdog in case it is used. When the application requires the use of a watchdog,
* set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through
* hook functions.
*/
/** \brief Enable/disable the hook functions for controlling the watchdog. */
#define BOOT_COP_HOOKS_ENABLE (1)
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N
****************************************************************************************/
/* A security mechanism can be enabled in the bootloader's XCP module by setting configu-
* rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming
* operations can be performed, access to this resource need to be unlocked.
* In the Microboot settings on tab "XCP Protection" you need to specify a DLL that
* implements the unlocking algorithm. The demo programs are configured for the (simple)
* algorithm in "libseednkey.dll". The source code for this DLL is available so it can be
* customized to your needs.
* During the unlock sequence, Microboot requests a seed from the bootloader, which is in
* the format of a byte array. Using this seed the unlock algorithm in the DLL computes
* a key, which is also a byte array, and sends this back to the bootloader. The
* bootloader then verifies this key to determine if programming and erase operations are
* permitted.
* After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook()
* are called by the bootloader to obtain the seed and to verify the key, respectively.
*/
#define BOOT_XCP_SEED_KEY_ENABLE (0)
#endif /* BLT_CONF_H */
/*********************************** end of blt_conf.h *********************************/

26
firmware/config/boards/proteus/openblt/board.mk Normal file
View File

@ -0,0 +1,26 @@
#|--------------------------------------------------------------------------------------|
#| Collect project files |
#|--------------------------------------------------------------------------------------|
# Collect all application files in the current directory and its subdirectories, but
# exclude flash-layout.c as this one is directly included in a source file, when used.
PROJ_FILES += $(filter-out $(OPENBLT_BOARD_DIR)/flash_layout.c, $(call rwildcard, $(OPENBLT_BOARD_DIR), *.c *.h *.s))
#|--------------------------------------------------------------------------------------|
#| Options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
BRDFLAGS = -DSTM32F429xx
else ifeq ($(PROJECT_CPU),ARCH_STM32F7)
#TODO: check what CPU is on proteus f7
BRDFLAGS = -DSTM32F767xx
else ifeq ($(PROJECT_CPU),ARCH_STM32H7)
#TODO: check what CPU is on proteus h7
BRDFLAGS = -DSTM32H743xx
endif
BRDFLAGS += -DHSE_VALUE=8000000
#|--------------------------------------------------------------------------------------|
#| Specify library files |
#|--------------------------------------------------------------------------------------|
LIBS =

28
firmware/config/boards/proteus/openblt/flash_layout.c Normal file
View File

@ -0,0 +1,28 @@
/* Define STM32F4 or STM32F7 flash layout in dual bank mode. Only first bank is defined */
static const tFlashSector flashLayout[] =
{
/* space is reserved for a bootloader configuration with all supported communication
* interfaces enabled. when for example only UART is needed, then the space required
* for the bootloader can be made a lot smaller here.
*/
/* { 0x08000000, 0x04000, 0 }, flash sector 0 - reserved for bootloader */
/* { 0x08004000, 0x04000, 1 }, flash sector 1 - reserved for bootloader */
{ 0x08008000, 0x08000, 2}, /* flash sector 2 - 16kb */
{ 0x0800c000, 0x08000, 3}, /* flash sector 3 - 16kb */
{ 0x08010000, 0x10000, 4}, /* flash sector 4 - 64kb */
{ 0x08020000, 0x20000, 5}, /* flash sector 5 - 128kb */
{ 0x08040000, 0x20000, 6}, /* flash sector 6 - 128kb */
{ 0x08060000, 0x20000, 7}, /* flash sector 7 - 128kb */
#if (BOOT_NVM_SIZE_KB > 1024)
{ 0x08080000, 0x20000, 8}, /* flash sector 8 - 128kb */
{ 0x080a0000, 0x20000, 9}, /* flash sector 9 - 128kb */
{ 0x080c0000, 0x20000, 10}, /* flash sector 10 - 128kb */
{ 0x080e0000, 0x20000, 11}, /* flash sector 11 - 128kb */
#endif
/* Bank #2 is not defined */
#if (BOOT_NVM_SIZE_KB > 2048)
#error "BOOT_NVM_SIZE_KB > 2048 is currently not supported."
#endif
};

358
firmware/config/boards/proteus/openblt/hooks.c Normal file
View File

@ -0,0 +1,358 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/hooks.c
* \brief Bootloader callback source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* LED driver header */
#ifdef STM32F429xx
#include "stm32f4xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32F767xx
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32H743xx
#include "stm32h7xx.h" /* STM32 CPU and HAL header */
#endif
/****************************************************************************************
* B A C K D O O R E N T R Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Initializes the backdoor entry option.
** \return none.
**
****************************************************************************************/
void BackDoorInitHook(void)
{
} /*** end of BackDoorInitHook ***/
/************************************************************************************//**
** \brief Checks if a backdoor entry is requested.
** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool BackDoorEntryHook(void)
{
/* default implementation always activates the bootloader after a reset */
return BLT_TRUE;
} /*** end of BackDoorEntryHook ***/
#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */
/****************************************************************************************
* C P U D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0)
/************************************************************************************//**
** \brief Callback that gets called when the bootloader is about to exit and
** hand over control to the user program. This is the last moment that
** some final checking can be performed and if necessary prevent the
** bootloader from activiting the user program.
** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep
** keep the bootloader active.
**
****************************************************************************************/
blt_bool CpuUserProgramStartHook(void)
{
/* additional and optional backdoor entry through the pushbutton on the board. to
* force the bootloader to stay active after reset, keep the pushbutton pressed while
* resetting the microcontroller.
*/
if (HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_13) == GPIO_PIN_SET)
{
/* pushbutton pressed, so do not start the user program and keep the
* bootloader active instead.
*/
return BLT_FALSE;
}
/* clean up the LED driver */
LedBlinkExit();
/* okay to start the user program */
return BLT_TRUE;
} /*** end of CpuUserProgramStartHook ***/
#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */
/****************************************************************************************
* W A T C H D O G D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COP_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** initialization routine. It can be used to configure and enable the
** watchdog.
** \return none.
**
****************************************************************************************/
void CopInitHook(void)
{
/* this function is called upon initialization. might as well use it to initialize
* the LED driver. It is kind of a visual watchdog anyways.
*/
LedBlinkInit(100);
} /*** end of CopInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** service routine. This gets called upon initialization and during
** potential long lasting loops and routine. It can be used to service
** the watchdog to prevent a watchdog reset.
** \return none.
**
****************************************************************************************/
void CopServiceHook(void)
{
/* run the LED blink task. this is a better place to do it than in the main() program
* loop. certain operations such as flash erase can take a long time, which would cause
* a blink interval to be skipped. this function is also called during such operations,
* so no blink intervals will be skipped when calling the LED blink task here.
*/
LedBlinkTask();
} /*** end of CopServiceHook ***/
#endif /* BOOT_COP_HOOKS_ENABLE > 0 */
/****************************************************************************************
* U S B C O M M U N I C A T I O N I N T E R F A C E H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COM_USB_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called whenever the USB device should be connected
** to the USB bus.
** \param connect BLT_TRUE to connect and BLT_FALSE to disconnect.
** \return none.
**
****************************************************************************************/
void UsbConnectHook(blt_bool connect)
{
/* Note that this is handled automatically by the OTG peripheral. */
} /*** end of UsbConnect ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device
** to enter a low power mode.
** \return none.
**
****************************************************************************************/
void UsbEnterLowPowerModeHook(void)
{
/* support to enter a low power mode can be implemented here */
} /*** end of UsbEnterLowPowerMode ***/
/************************************************************************************//**
** \brief Callback that gets called whenever the USB host requests the device to
** exit low power mode.
** \return none.
**
****************************************************************************************/
void UsbLeaveLowPowerModeHook(void)
{
/* support to leave a low power mode can be implemented here */
} /*** end of UsbLeaveLowPowerMode ***/
#endif /* BOOT_COM_USB_ENABLE > 0 */
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_NVM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the start of the internal NVM driver
** initialization routine.
** \return none.
**
****************************************************************************************/
void NvmInitHook(void)
{
} /*** end of NvmInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of a firmware update to reinitialize
** the NVM driver.
** \return none.
**
****************************************************************************************/
void NvmReinitHook(void)
{
} /*** end of NvmReinitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver write
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't
** been written yet.
** \param addr Start address.
** \param len Length in bytes.
** \param data Pointer to the data buffer.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the write
** operation failed.
**
****************************************************************************************/
blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmWriteHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver erase
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory
** hasn't been erased yet.
** \param addr Start address.
** \param len Length in bytes.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the erase
** operation failed.
**
****************************************************************************************/
blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmEraseHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the NVM programming session.
** \return BLT_TRUE is successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmDoneHook(void)
{
return BLT_TRUE;
} /*** end of NvmDoneHook ***/
#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */
#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Verifies the checksum, which indicates that a valid user program is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmVerifyChecksumHook(void)
{
return BLT_TRUE;
} /*** end of NvmVerifyChecksum ***/
/************************************************************************************//**
** \brief Writes a checksum of the user program to non-volatile memory. This is
** performed once the entire user program has been programmed. Through
** the checksum, the bootloader can check if a valid user programming is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmWriteChecksumHook(void)
{
return BLT_TRUE;
}
#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_XCP_SEED_KEY_ENABLE > 0)
/************************************************************************************//**
** \brief Provides a seed to the XCP master that will be used for the key
** generation when the master attempts to unlock the specified resource.
** Called by the GET_SEED command.
** \param resource Resource that the seed if requested for (XCP_RES_XXX).
** \param seed Pointer to byte buffer wher the seed will be stored.
** \return Length of the seed in bytes.
**
****************************************************************************************/
blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed)
{
/* request seed for unlocking ProGraMming resource */
if ((resource & XCP_RES_PGM) != 0)
{
seed[0] = 0x55;
}
/* return seed length */
return 1;
} /*** end of XcpGetSeedHook ***/
/************************************************************************************//**
** \brief Called by the UNLOCK command and checks if the key to unlock the
** specified resource was correct. If so, then the resource protection
** will be removed.
** \param resource resource to unlock (XCP_RES_XXX).
** \param key pointer to the byte buffer holding the key.
** \param len length of the key in bytes.
** \return 1 if the key was correct, 0 otherwise.
**
****************************************************************************************/
blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len)
{
/* suppress compiler warning for unused parameter */
len = len;
/* the example key algorithm in "libseednkey.dll" works as follows:
* - PGM will be unlocked if key = seed - 1
*/
/* check key for unlocking ProGraMming resource */
if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1)))
{
/* correct key received for unlocking PGM resource */
return 1;
}
/* still here so key incorrect */
return 0;
} /*** end of XcpVerifyKeyHook ***/
#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */
/*********************************** end of hooks.c ************************************/

108
firmware/config/boards/proteus/openblt/led.c Normal file
View File

@ -0,0 +1,108 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Bootled.c
* \brief LED driver source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* module header */
#ifdef STM32F429xx
#include "stm32f4xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32F767xx
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32H743xx
#include "stm32h7xx.h" /* STM32 CPU and HAL header */
#endif
/****************************************************************************************
* Local data declarations
****************************************************************************************/
/** \brief Holds the desired LED blink interval time. */
static blt_int16u ledBlinkIntervalMs;
/************************************************************************************//**
** \brief Initializes the LED blink driver.
** \param interval_ms Specifies the desired LED blink interval time in milliseconds.
** \return none.
**
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms)
{
/* store the interval time between LED toggles */
ledBlinkIntervalMs = interval_ms;
} /*** end of LedBlinkInit ***/
/************************************************************************************//**
** \brief Task function for blinking the LED as a fixed timer interval.
** \return none.
**
****************************************************************************************/
void LedBlinkTask(void)
{
static blt_bool ledOn = BLT_FALSE;
static blt_int32u nextBlinkEvent = 0;
/* check for blink event */
if (TimerGet() >= nextBlinkEvent)
{
/* toggle the LED state */
if (ledOn == BLT_FALSE)
{
ledOn = BLT_TRUE;
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET);
}
else
{
ledOn = BLT_FALSE;
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
}
/* schedule the next blink event */
nextBlinkEvent = TimerGet() + ledBlinkIntervalMs;
}
} /*** end of LedBlinkTask ***/
/************************************************************************************//**
** \brief Cleans up the LED blink driver. This is intended to be used upon program
** exit.
** \return none.
**
****************************************************************************************/
void LedBlinkExit(void)
{
/* turn the LED off */
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
} /*** end of LedBlinkExit ***/
/*********************************** end of led.c **************************************/

40
firmware/config/boards/proteus/openblt/led.h Normal file
View File

@ -0,0 +1,40 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/led.h
* \brief LED driver header file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef LED_H
#define LED_H
/****************************************************************************************
* Function prototypes
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms);
void LedBlinkTask(void);
void LedBlinkExit(void);
#endif /* LED_H */
/*********************************** end of led.h **************************************/

296
firmware/config/boards/proteus/openblt/main.c Normal file
View File

@ -0,0 +1,296 @@
/************************************************************************************//**
* \file Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/main.c
* \brief Bootloader application source file.
* \ingroup Boot_ARMCM4_STM32F4_Nucleo_F429ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#ifdef STM32F429xx
#include "stm32f4xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32F767xx
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
#endif
#ifdef STM32H743xx
#include "stm32h7xx.h" /* STM32 CPU and HAL header */
#endif
/****************************************************************************************
* Function prototypes
****************************************************************************************/
static void Init(void);
static void SystemClock_Config(void);
/************************************************************************************//**
** \brief This is the entry point for the bootloader application and is called
** by the reset interrupt vector after the C-startup routines executed.
** \return Program return code.
**
****************************************************************************************/
int main(void)
{
/* initialize the microcontroller */
Init();
/* initialize the bootloader */
BootInit();
/* start the infinite program loop */
while (1)
{
/* run the bootloader task */
BootTask();
}
/* program should never get here */
return 0;
} /*** end of main ***/
/************************************************************************************//**
** \brief Interrupt service routine of the timer.
** \return none.
**
****************************************************************************************/
void SysTick_Handler(void)
{
/* Increment the tick counter. */
HAL_IncTick();
/* Invoke the system tick handler. */
HAL_SYSTICK_IRQHandler();
} /*** end of TimerISRHandler ***/
/************************************************************************************//**
** \brief Initializes the microcontroller.
** \return none.
**
****************************************************************************************/
static void Init(void)
{
/* HAL library initialization */
HAL_Init();
/* configure system clock */
SystemClock_Config();
} /*** end of Init ***/
/************************************************************************************//**
** \brief System Clock Configuration. This code was created by CubeMX and configures
** the system clock to match the configuration in the bootloader's
** configuration (blt_conf.h), specifically the macros:
** BOOT_CPU_SYSTEM_SPEED_KHZ and BOOT_CPU_XTAL_SPEED_KHZ.
** Note that the Lower Layer drivers were selected in CubeMX for the RCC
** subsystem.
** \return none.
**
****************************************************************************************/
static void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/* Configure the main internal regulator output voltage. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
/* Initializes the CPU, AHB and APB buses clocks. */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
} /*** end of SystemClock_Config ***/
/************************************************************************************//**
** \brief Initializes the Global MSP. This function is called from HAL_Init()
** function to perform system level initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Power and SYSCFG clock enable. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* GPIO ports clock enable. */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
/* Configure PE3 pin for the LED. */
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET);
#if 0
/* Configure GPIO pin for (optional) backdoor entry input. */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* UART TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_5 | GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* UART clock enable. */
__HAL_RCC_USART2_CLK_ENABLE();
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* CAN TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* CAN clock enable. */
__HAL_RCC_CAN1_CLK_ENABLE();
#endif
#if (BOOT_COM_USB_ENABLE > 0)
/* USB pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USB clock enable. */
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
#endif
} /*** end of HAL_MspInit ***/
/************************************************************************************//**
** \brief DeInitializes the Global MSP. This function is called from HAL_DeInit()
** function to perform system level de-initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspDeInit(void)
{
/* Reset the RCC clock configuration to the default reset state. */
HAL_RCC_DeInit();
/* Reset GPIO pin for the LED to turn it off. */
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_RESET);
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3);
#if 0
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_13);
#endif
#if (BOOT_COM_USB_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_12);
/* USB clock disable. */
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_1);
/* CAN clock disable. */
__HAL_RCC_CAN1_CLK_DISABLE();
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_6);
/* UART clock disable. */
__HAL_RCC_USART2_CLK_DISABLE();
#endif
/* GPIO ports clock disable. */
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOA_CLK_DISABLE();
/* SYSCFG and PWR clock disable. */
__HAL_RCC_PWR_CLK_DISABLE();
__HAL_RCC_SYSCFG_CLK_DISABLE();
} /*** end of HAL_MspDeInit ***/
/*********************************** end of main.c *************************************/

543
firmware/config/boards/proteus/openblt/startup_stm32f429xx.s Normal file
View File

@ -0,0 +1,543 @@
/**
******************************************************************************
* @file startup_stm32f429xx.s
* @author MCD Application Team
* @brief STM32F429xx Devices vector table for GCC based toolchains.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word CAN1_TX_IRQHandler /* CAN1 TX */
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDIO_IRQHandler /* SDIO */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word CAN2_TX_IRQHandler /* CAN2 TX */
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
.word OTG_FS_IRQHandler /* USB OTG FS */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_IRQHandler /* DCMI */
.word 0 /* Reserved */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC_IRQHandler */
.word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */
.word DMA2D_IRQHandler /* DMA2D */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_IRQHandler
.thumb_set DCMI_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2
firmware/config/boards/subaru_eg33/compile_subaru_eg33_f7.sh
View File

@ -5,4 +5,6 @@ export EXTRA_PARAMS=-DSHORT_BOARD_NAME=subaru_eg33_f7
#-DDUMMY -DEFI_ENABLE_ASSERTS=FALSE -DCH_DBG_ENABLE_ASSERTS=FALSE -DCH_DBG_ENABLE_STACK_CHECK=FALSE -DCH_DBG_FILL_THREADS=FALSE -DCH_DBG_THREADS_PROFILING=FALSE"
export USE_OPENBLT=yes
bash ../common_make.sh

3
firmware/config/boards/subaru_eg33/make.sh
View File

@ -6,6 +6,7 @@ export EXTRA_PARAMS="-DSHORT_BOARD_NAME=subaru_eg33_f7 -DDUMMY -DEFI_ENABLE_ASSE
export DEFAULT_ENGINE_TYPE="-DDEFAULT_ENGINE_TYPE=SUBARUEG33_DEFAULTS"
#echo $EXTRA_PARAMS
#export DEBUG_LEVEL_OPT="-O0"
#export USE_BOOTLOADER=yes
export USE_OPENBLT=yes
bash ../common_make.sh

191
firmware/config/boards/subaru_eg33/openblt/blt_conf.h Normal file
View File

@ -0,0 +1,191 @@
/************************************************************************************//**
* \file config/boards/microrusefi/openblt/blt_conf.h
* \brief Bootloader configuration header file for RusEFI Subaru EG33 board
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2021 by Andrey Gusakov https://rusefi.com/
* Based on file:
* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef BLT_CONF_H
#define BLT_CONF_H
/****************************************************************************************
* C P U D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* To properly initialize the baudrate clocks of the communication interface, typically
* the speed of the crystal oscillator and/or the speed at which the system runs is
* needed. Set these through configurables BOOT_CPU_XTAL_SPEED_KHZ and
* BOOT_CPU_SYSTEM_SPEED_KHZ, respectively. To enable data exchange with the host that is
* not dependent on the targets architecture, the byte ordering needs to be known.
* Setting BOOT_CPU_BYTE_ORDER_MOTOROLA to 1 selects big endian mode and 0 selects
* little endian mode.
*
* Set BOOT_CPU_USER_PROGRAM_START_HOOK to 1 if you would like a hook function to be
* called the moment the user program is about to be started. This could be used to
* de-initialize application specific parts, for example to stop blinking an LED, etc.
*/
/** \brief Frequency of the external crystal oscillator. */
#define BOOT_CPU_XTAL_SPEED_KHZ (25000)
/** \brief Desired system speed. */
#define BOOT_CPU_SYSTEM_SPEED_KHZ (216000)
/** \brief Motorola or Intel style byte ordering. */
#define BOOT_CPU_BYTE_ORDER_MOTOROLA (0)
/** \brief Enable/disable hook function call right before user program start. */
#define BOOT_CPU_USER_PROGRAM_START_HOOK (1)
/****************************************************************************************
* C O M M U N I C A T I O N I N T E R F A C E C O N F I G U R A T I O N
****************************************************************************************/
/* The CAN communication interface is selected by setting the BOOT_COM_CAN_ENABLE
* configurable to 1. Configurable BOOT_COM_CAN_BAUDRATE selects the communication speed
* in bits/second. Two CAN messages are reserved for communication with the host. The
* message identifier for sending data from the target to the host is configured with
* BOOT_COM_CAN_TXMSG_ID. The one for receiving data from the host is configured with
* BOOT_COM_CAN_RXMSG_ID. Note that an extended 29-bit CAN identifier is configured by
* OR-ing with mask 0x80000000. The maximum amount of data bytes in a message for data
* transmission and reception is set through BOOT_COM_CAN_TX_MAX_DATA and
* BOOT_COM_CAN_RX_MAX_DATA, respectively. It is common for a microcontroller to have more
* than 1 CAN controller on board. The zero-based BOOT_COM_CAN_CHANNEL_INDEX selects the
* CAN controller channel.
*
*/
/** \brief Enable/disable CAN transport layer. */
#define BOOT_COM_CAN_ENABLE (1)
/** \brief Configure the desired CAN baudrate. */
#define BOOT_COM_CAN_BAUDRATE (500000)
/** \brief Configure CAN message ID target->host. */
#define BOOT_COM_CAN_TX_MSG_ID (0x7E1 /*| 0x80000000*/)
/** \brief Configure number of bytes in the target->host CAN message. */
#define BOOT_COM_CAN_TX_MAX_DATA (8)
/** \brief Configure CAN message ID host->target. */
#define BOOT_COM_CAN_RX_MSG_ID (0x667 /*| 0x80000000*/)
/** \brief Configure number of bytes in the host->target CAN message. */
#define BOOT_COM_CAN_RX_MAX_DATA (8)
/** \brief Select the desired CAN peripheral as a zero based index. */
#define BOOT_COM_CAN_CHANNEL_INDEX (0)
/* The RS232 communication interface is selected by setting the BOOT_COM_RS232_ENABLE
* configurable to 1. Configurable BOOT_COM_RS232_BAUDRATE selects the communication speed
* in bits/second. The maximum amount of data bytes in a message for data transmission
* and reception is set through BOOT_COM_RS232_TX_MAX_DATA and BOOT_COM_RS232_RX_MAX_DATA,
* respectively. It is common for a microcontroller to have more than 1 UART interface
* on board. The zero-based BOOT_COM_RS232_CHANNEL_INDEX selects the UART interface.
*
*/
/** \brief Enable/disable UART transport layer. */
#define BOOT_COM_RS232_ENABLE (1)
/** \brief Configure the desired communication speed. */
#define BOOT_COM_RS232_BAUDRATE (115200)
/** \brief Configure number of bytes in the target->host data packet. */
#define BOOT_COM_RS232_TX_MAX_DATA (64)
/** \brief Configure number of bytes in the host->target data packet. */
#define BOOT_COM_RS232_RX_MAX_DATA (64)
/** \brief Select the desired UART peripheral as a zero based index. */
#define BOOT_COM_RS232_CHANNEL_INDEX (0)
/****************************************************************************************
* B A C K D O O R E N T R Y C O N F I G U R A T I O N
****************************************************************************************/
/* It is possible to implement an application specific method to force the bootloader to
* stay active after a reset. Such a backdoor entry into the bootloader is desired in
* situations where the user program does not run properly and therefore cannot
* reactivate the bootloader. By enabling these hook functions, the application can
* implement the backdoor, which overrides the default backdoor entry that is programmed
* into the bootloader. When desired for security purposes, these hook functions can
* also be implemented in a way that disables the backdoor entry altogether.
*/
/** \brief Enable/disable the backdoor override hook functions. */
#define BOOT_BACKDOOR_HOOKS_ENABLE (0)
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The NVM driver typically supports erase and program operations of the internal memory
* present on the microcontroller. Through these hook functions the NVM driver can be
* extended to support additional memory types such as external flash memory and serial
* eeproms. The size of the internal memory in kilobytes is specified with configurable
* BOOT_NVM_SIZE_KB. If desired the internal checksum writing and verification method can
* be overridden with a application specific method by enabling configuration switch
* BOOT_NVM_CHECKSUM_HOOKS_ENABLE.
*/
/** \brief Enable/disable the NVM hook function for supporting additional memory devices. */
#define BOOT_NVM_HOOKS_ENABLE (0)
/** \brief Configure the size of the default memory device (typically flash EEPROM). */
#define BOOT_NVM_SIZE_KB (2048)
/** \brief Enable/disable hooks functions to override the user program checksum handling. */
#define BOOT_NVM_CHECKSUM_HOOKS_ENABLE (0)
/****************************************************************************************
* F L A S H M E M O R Y D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/** \brief Enable support for a custom flash layout table. It is located in
* flash_layout.c. This was done because the default flashLayout[] table
* in the bootloader's core defines flash map for single bank mode.
* RusEFI uses dual bank mode.
*/
#define BOOT_FLASH_CUSTOM_LAYOUT_ENABLE (1)
/** \brief Use one of 'reserved' IRQ vectors at the beginig on vector table.
*/
#define BOOT_FLASH_VECTOR_TABLE_CS_OFFSET (0x1C)
/****************************************************************************************
* W A T C H D O G D R I V E R C O N F I G U R A T I O N
****************************************************************************************/
/* The COP driver cannot be configured internally in the bootloader, because its use
* and configuration is application specific. The bootloader does need to service the
* watchdog in case it is used. When the application requires the use of a watchdog,
* set BOOT_COP_HOOKS_ENABLE to be able to initialize and service the watchdog through
* hook functions.
*/
/** \brief Enable/disable the hook functions for controlling the watchdog. */
#define BOOT_COP_HOOKS_ENABLE (1)
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y C O N F I G U R A T I O N
****************************************************************************************/
/* A security mechanism can be enabled in the bootloader's XCP module by setting configu-
* rable BOOT_XCP_SEED_KEY_ENABLE to 1. Before any memory erase or programming
* operations can be performed, access to this resource need to be unlocked.
* In the Microboot settings on tab "XCP Protection" you need to specify a DLL that
* implements the unlocking algorithm. The demo programs are configured for the (simple)
* algorithm in "libseednkey.dll". The source code for this DLL is available so it can be
* customized to your needs.
* During the unlock sequence, Microboot requests a seed from the bootloader, which is in
* the format of a byte array. Using this seed the unlock algorithm in the DLL computes
* a key, which is also a byte array, and sends this back to the bootloader. The
* bootloader then verifies this key to determine if programming and erase operations are
* permitted.
* After enabling this feature the hook functions XcpGetSeedHook() and XcpVerifyKeyHook()
* are called by the bootloader to obtain the seed and to verify the key, respectively.
*/
#define BOOT_XCP_SEED_KEY_ENABLE (0)
#endif /* BLT_CONF_H */
/*********************************** end of blt_conf.h *********************************/

17
firmware/config/boards/subaru_eg33/openblt/board.mk Normal file
View File

@ -0,0 +1,17 @@
#|--------------------------------------------------------------------------------------|
#| Collect project files |
#|--------------------------------------------------------------------------------------|
# Collect all application files in the current directory and its subdirectories, but
# exclude flash-layout.c as this one is directly included in a source file, when used.
PROJ_FILES += $(filter-out $(OPENBLT_BOARD_DIR)/flash_layout.c, $(call rwildcard, $(OPENBLT_BOARD_DIR), *.c *.h *.s))
#|--------------------------------------------------------------------------------------|
#| Specific options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
BRDFLAGS = -DSTM32F767xx -DHSE_VALUE=25000000
#|--------------------------------------------------------------------------------------|
#| Specify library files |
#|--------------------------------------------------------------------------------------|
LIBS =

28
firmware/config/boards/subaru_eg33/openblt/flash_layout.c Normal file
View File

@ -0,0 +1,28 @@
/* Define STM32F765 flash layout in dual bank mode. Only first bank is defined */
static const tFlashSector flashLayout[] =
{
/* space is reserved for a bootloader configuration with all supported communication
* interfaces enabled. when for example only UART is needed, then the space required
* for the bootloader can be made a lot smaller here.
*/
/* { 0x08000000, 0x04000, 0 }, flash sector 0 - reserved for bootloader */
/* { 0x08004000, 0x04000, 1 }, flash sector 1 - reserved for bootloader */
{ 0x08008000, 0x08000, 2}, /* flash sector 2 - 16kb */
{ 0x0800c000, 0x08000, 3}, /* flash sector 3 - 16kb */
{ 0x08010000, 0x10000, 4}, /* flash sector 4 - 64kb */
{ 0x08020000, 0x20000, 5}, /* flash sector 5 - 128kb */
{ 0x08040000, 0x20000, 6}, /* flash sector 6 - 128kb */
{ 0x08060000, 0x20000, 7}, /* flash sector 7 - 128kb */
#if (BOOT_NVM_SIZE_KB > 1024)
{ 0x08080000, 0x20000, 8}, /* flash sector 8 - 128kb */
{ 0x080a0000, 0x20000, 9}, /* flash sector 9 - 128kb */
{ 0x080c0000, 0x20000, 10}, /* flash sector 10 - 128kb */
{ 0x080e0000, 0x20000, 11}, /* flash sector 11 - 128kb */
#endif
/* Bank #2 is not defined */
#if (BOOT_NVM_SIZE_KB > 2048)
#error "BOOT_NVM_SIZE_KB > 2048 is currently not supported."
#endif
};

306
firmware/config/boards/subaru_eg33/openblt/hooks.c Normal file
View File

@ -0,0 +1,306 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/hooks.c
* \brief Bootloader callback source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* LED driver header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
/****************************************************************************************
* C P U D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_CPU_USER_PROGRAM_START_HOOK > 0)
/************************************************************************************//**
** \brief Callback that gets called when the bootloader is about to exit and
** hand over control to the user program. This is the last moment that
** some final checking can be performed and if necessary prevent the
** bootloader from activiting the user program.
** \return BLT_TRUE if it is okay to start the user program, BLT_FALSE to keep
** keep the bootloader active.
**
****************************************************************************************/
blt_bool CpuUserProgramStartHook(void)
{
/* additional and optional backdoor entry through the pushbutton on the board. to
* force the bootloader to stay active after reset, keep the pushbutton pressed while
* resetting the microcontroller.
*/
if (HAL_GPIO_ReadPin(GPIOC, GPIO_PIN_13) == GPIO_PIN_SET)
{
/* pushbutton pressed, so do not start the user program and keep the
* bootloader active instead.
*/
return BLT_FALSE;
}
/* clean up the LED driver */
LedBlinkExit();
/* okay to start the user program.*/
return BLT_TRUE;
} /*** end of CpuUserProgramStartHook ***/
#endif /* BOOT_CPU_USER_PROGRAM_START_HOOK > 0 */
/****************************************************************************************
* W A T C H D O G D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_COP_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** initialization routine. It can be used to configure and enable the
** watchdog.
** \return none.
**
****************************************************************************************/
void CopInitHook(void)
{
/* this function is called upon initialization. might as well use it to initialize
* the LED driver. It is kind of a visual watchdog anyways.
*/
LedBlinkInit(100);
} /*** end of CopInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the internal COP driver
** service routine. This gets called upon initialization and during
** potential long lasting loops and routine. It can be used to service
** the watchdog to prevent a watchdog reset.
** \return none.
**
****************************************************************************************/
void CopServiceHook(void)
{
/* run the LED blink task. this is a better place to do it than in the main() program
* loop. certain operations such as flash erase can take a long time, which would cause
* a blink interval to be skipped. this function is also called during such operations,
* so no blink intervals will be skipped when calling the LED blink task here.
*/
LedBlinkTask();
} /*** end of CopServiceHook ***/
#endif /* BOOT_COP_HOOKS_ENABLE > 0 */
/****************************************************************************************
* B A C K D O O R E N T R Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_BACKDOOR_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Initializes the backdoor entry option.
** \return none.
**
****************************************************************************************/
void BackDoorInitHook(void)
{
} /*** end of BackDoorInitHook ***/
/************************************************************************************//**
** \brief Checks if a backdoor entry is requested.
** \return BLT_TRUE if the backdoor entry is requested, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool BackDoorEntryHook(void)
{
/* default implementation always activates the bootloader after a reset */
return BLT_TRUE;
} /*** end of BackDoorEntryHook ***/
#endif /* BOOT_BACKDOOR_HOOKS_ENABLE > 0 */
/****************************************************************************************
* N O N - V O L A T I L E M E M O R Y D R I V E R H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_NVM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Callback that gets called at the start of the internal NVM driver
** initialization routine.
** \return none.
**
****************************************************************************************/
void NvmInitHook(void)
{
} /*** end of NvmInitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of a firmware update to reinitialize
** the NVM driver.
** \return none.
**
****************************************************************************************/
void NvmReinitHook(void)
{
} /*** end of NvmReinitHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver write
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the data hasn't
** been written yet.
** \param addr Start address.
** \param len Length in bytes.
** \param data Pointer to the data buffer.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the write
** operation failed.
**
****************************************************************************************/
blt_int8u NvmWriteHook(blt_addr addr, blt_int32u len, blt_int8u *data)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmWriteHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the start of the NVM driver erase
** routine. It allows additional memory to be operated on. If the address
** is not within the range of the additional memory, then
** BLT_NVM_NOT_IN_RANGE must be returned to indicate that the memory
** hasn't been erased yet.
** \param addr Start address.
** \param len Length in bytes.
** \return BLT_NVM_OKAY if successful, BLT_NVM_NOT_IN_RANGE if the address is
** not within the supported memory range, or BLT_NVM_ERROR is the erase
** operation failed.
**
****************************************************************************************/
blt_int8u NvmEraseHook(blt_addr addr, blt_int32u len)
{
return BLT_NVM_NOT_IN_RANGE;
} /*** end of NvmEraseHook ***/
/************************************************************************************//**
** \brief Callback that gets called at the end of the NVM programming session.
** \return BLT_TRUE is successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmDoneHook(void)
{
return BLT_TRUE;
} /*** end of NvmDoneHook ***/
#endif /* BOOT_NVM_HOOKS_ENABLE > 0 */
#if (BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0)
/************************************************************************************//**
** \brief Verifies the checksum, which indicates that a valid user program is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmVerifyChecksumHook(void)
{
return BLT_TRUE;
} /*** end of NvmVerifyChecksum ***/
/************************************************************************************//**
** \brief Writes a checksum of the user program to non-volatile memory. This is
** performed once the entire user program has been programmed. Through
** the checksum, the bootloader can check if a valid user programming is
** present and can be started.
** \return BLT_TRUE if successful, BLT_FALSE otherwise.
**
****************************************************************************************/
blt_bool NvmWriteChecksumHook(void)
{
return BLT_TRUE;
}
#endif /* BOOT_NVM_CHECKSUM_HOOKS_ENABLE > 0 */
/****************************************************************************************
* S E E D / K E Y S E C U R I T Y H O O K F U N C T I O N S
****************************************************************************************/
#if (BOOT_XCP_SEED_KEY_ENABLE > 0)
/************************************************************************************//**
** \brief Provides a seed to the XCP master that will be used for the key
** generation when the master attempts to unlock the specified resource.
** Called by the GET_SEED command.
** \param resource Resource that the seed if requested for (XCP_RES_XXX).
** \param seed Pointer to byte buffer wher the seed will be stored.
** \return Length of the seed in bytes.
**
****************************************************************************************/
blt_int8u XcpGetSeedHook(blt_int8u resource, blt_int8u *seed)
{
/* request seed for unlocking ProGraMming resource */
if ((resource & XCP_RES_PGM) != 0)
{
seed[0] = 0x55;
}
/* return seed length */
return 1;
} /*** end of XcpGetSeedHook ***/
/************************************************************************************//**
** \brief Called by the UNLOCK command and checks if the key to unlock the
** specified resource was correct. If so, then the resource protection
** will be removed.
** \param resource resource to unlock (XCP_RES_XXX).
** \param key pointer to the byte buffer holding the key.
** \param len length of the key in bytes.
** \return 1 if the key was correct, 0 otherwise.
**
****************************************************************************************/
blt_int8u XcpVerifyKeyHook(blt_int8u resource, blt_int8u *key, blt_int8u len)
{
/* suppress compiler warning for unused parameter */
len = len;
/* the example key algorithm in "libseednkey.dll" works as follows:
* - PGM will be unlocked if key = seed - 1
*/
/* check key for unlocking ProGraMming resource */
if ((resource == XCP_RES_PGM) && (key[0] == (0x55-1)))
{
/* correct key received for unlocking PGM resource */
return 1;
}
/* still here so key incorrect */
return 0;
} /*** end of XcpVerifyKeyHook ***/
#endif /* BOOT_XCP_SEED_KEY_ENABLE > 0 */
/*********************************** end of hooks.c ************************************/

100
firmware/config/boards/subaru_eg33/openblt/led.c Normal file
View File

@ -0,0 +1,100 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/led.c
* \brief LED driver source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "led.h" /* module header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
/****************************************************************************************
* Local data declarations
****************************************************************************************/
/** \brief Holds the desired LED blink interval time. */
static blt_int16u ledBlinkIntervalMs;
/************************************************************************************//**
** \brief Initializes the LED blink driver.
** \param interval_ms Specifies the desired LED blink interval time in milliseconds.
** \return none.
**
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms)
{
/* store the interval time between LED toggles */
ledBlinkIntervalMs = interval_ms;
} /*** end of LedBlinkInit ***/
/************************************************************************************//**
** \brief Task function for blinking the LED as a fixed timer interval.
** \return none.
**
****************************************************************************************/
void LedBlinkTask(void)
{
static blt_bool ledOn = BLT_FALSE;
static blt_int32u nextBlinkEvent = 0;
/* check for blink event */
if (TimerGet() >= nextBlinkEvent)
{
/* toggle the LED state */
if (ledOn == BLT_FALSE)
{
ledOn = BLT_TRUE;
HAL_GPIO_WritePin(GPIOG, GPIO_PIN_8, GPIO_PIN_SET);
}
else
{
ledOn = BLT_FALSE;
HAL_GPIO_WritePin(GPIOG, GPIO_PIN_8, GPIO_PIN_RESET);
}
/* schedule the next blink event */
nextBlinkEvent = TimerGet() + ledBlinkIntervalMs;
}
} /*** end of LedBlinkTask ***/
/************************************************************************************//**
** \brief Cleans up the LED blink driver. This is intended to be used upon program
** exit.
** \return none.
**
****************************************************************************************/
void LedBlinkExit(void)
{
/* turn the LED off */
HAL_GPIO_WritePin(GPIOG, GPIO_PIN_8, GPIO_PIN_RESET);
} /*** end of LedBlinkExit ***/
/*********************************** end of led.c **************************************/

40
firmware/config/boards/subaru_eg33/openblt/led.h Normal file
View File

@ -0,0 +1,40 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/led.h
* \brief LED driver header file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
#ifndef LED_H
#define LED_H
/****************************************************************************************
* Function prototypes
****************************************************************************************/
void LedBlinkInit(blt_int16u interval_ms);
void LedBlinkTask(void);
void LedBlinkExit(void);
#endif /* LED_H */
/*********************************** end of led.h **************************************/

264
firmware/config/boards/subaru_eg33/openblt/main.c Normal file
View File

@ -0,0 +1,264 @@
/************************************************************************************//**
* \file Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/main.c
* \brief Bootloader application source file.
* \ingroup Boot_ARMCM7_STM32F7_Nucleo_F767ZI_GCC
* \internal
*----------------------------------------------------------------------------------------
* C O P Y R I G H T
*----------------------------------------------------------------------------------------
* Copyright (c) 2019 by Feaser http://www.feaser.com All rights reserved
*
*----------------------------------------------------------------------------------------
* L I C E N S E
*----------------------------------------------------------------------------------------
* This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published by the Free
* Software Foundation, either version 3 of the License, or (at your option) any later
* version.
*
* OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You have received a copy of the GNU General Public License along with OpenBLT. It
* should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
*
* \endinternal
****************************************************************************************/
/****************************************************************************************
* Include files
****************************************************************************************/
#include "boot.h" /* bootloader generic header */
#include "stm32f7xx.h" /* STM32 CPU and HAL header */
/****************************************************************************************
* Function prototypes
****************************************************************************************/
static void Init(void);
static void SystemClock_Config(void);
/************************************************************************************//**
** \brief This is the entry point for the bootloader application and is called
** by the reset interrupt vector after the C-startup routines executed.
** \return Program return code.
**
****************************************************************************************/
int main(void)
{
/* initialize the microcontroller */
Init();
/* initialize the bootloader */
BootInit();
/* start the infinite program loop */
while (1)
{
/* run the bootloader task */
BootTask();
}
/* program should never get here */
return 0;
} /*** end of main ***/
/************************************************************************************//**
** \brief Initializes the microcontroller.
** \return none.
**
****************************************************************************************/
static void Init(void)
{
/* HAL library initialization */
HAL_Init();
/* configure system clock */
SystemClock_Config();
} /*** end of Init ***/
/************************************************************************************//**
** \brief System Clock Configuration. This code was created by CubeMX and configures
** the system clock to match the configuration in the bootloader's
** configuration (blt_conf.h), specifically the macros:
** BOOT_CPU_SYSTEM_SPEED_KHZ and BOOT_CPU_XTAL_SPEED_KHZ.
** Note that the Lower Layer drivers were selected in CubeMX for the RCC
** subsystem.
** \return none.
**
****************************************************************************************/
static void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_ClkInitTypeDef RCC_ClkInitStruct;
/* Configure the main internal regulator output voltage. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Initializes the CPU, AHB and APB busses clocks. */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 25;
RCC_OscInitStruct.PLL.PLLN = 432;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
/* Activate the Over-Drive mode. */
if (HAL_PWREx_EnableOverDrive() != HAL_OK)
{
/* Clock overdrive hardware failure. Hang the system to prevent damage.
*/
ASSERT_RT(BLT_FALSE);
}
/* Initializes the CPU, AHB and APB busses clocks. */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK |
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
{
/* Clock configuration incorrect or hardware failure. Hang the system to prevent
* damage.
*/
ASSERT_RT(BLT_FALSE);
}
} /*** end of SystemClock_Config ***/
/************************************************************************************//**
** \brief Initializes the Global MSP. This function is called from HAL_Init()
** function to perform system level initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspInit(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Power and SYSCFG clock enable. */
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_RCC_SYSCFG_CLK_ENABLE();
/* GPIO ports clock enable. */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
#if (BOOT_COM_RS232_ENABLE > 0)
/* UART clock enable. */
__HAL_RCC_USART1_CLK_ENABLE();
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* CAN clock enable. */
__HAL_RCC_CAN1_CLK_ENABLE();
#endif
/* Configure GPIO pin for the Red LED. */
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOG, GPIO_PIN_8, GPIO_PIN_RESET);
#if 0
/* Configure GPIO pin for (optional) backdoor entry input. */
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* UART TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#endif
#if (BOOT_COM_CAN_ENABLE > 0)
/* CAN enable pin */
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOG, GPIO_PIN_0, GPIO_PIN_SET);
/* CAN TX and RX GPIO pin configuration. */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
#endif
} /*** end of HAL_MspInit ***/
/************************************************************************************//**
** \brief DeInitializes the Global MSP. This function is called from HAL_DeInit()
** function to perform system level de-initialization (GPIOs, clock, DMA,
** interrupt).
** \return none.
**
****************************************************************************************/
void HAL_MspDeInit(void)
{
/* Reset the RCC clock configuration to the default reset state. */
HAL_RCC_DeInit();
/* Reset GPIO pin for the LED to turn it off. */
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_SET);
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_13);
#if (BOOT_COM_CAN_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_1);
/* CAN clock disable. */
__HAL_RCC_CAN1_CLK_DISABLE();
#endif
#if (BOOT_COM_RS232_ENABLE > 0)
/* Deinit used GPIOs. */
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_10);
/* UART clock disable. */
__HAL_RCC_USART1_CLK_DISABLE();
#endif
/* GPIO ports clock disable. */
__HAL_RCC_GPIOG_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOA_CLK_DISABLE();
/* SYSCFG and PWR clock disable. */
__HAL_RCC_PWR_CLK_DISABLE();
__HAL_RCC_SYSCFG_CLK_DISABLE();
} /*** end of HAL_MspDeInit ***/
/*********************************** end of main.c *************************************/

634
firmware/config/boards/subaru_eg33/openblt/startup_stm32f767xx.s Normal file
View File

@ -0,0 +1,634 @@
/**
******************************************************************************
* @file startup_stm32f767xx.s
* @author MCD Application Team
* @brief STM32F767xx Devices vector table for GCC based toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M7 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m7
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system initialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M7. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word CAN1_TX_IRQHandler /* CAN1 TX */
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FMC_IRQHandler /* FMC */
.word SDMMC1_IRQHandler /* SDMMC1 */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word ETH_IRQHandler /* Ethernet */
.word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
.word CAN2_TX_IRQHandler /* CAN2 TX */
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
.word OTG_FS_IRQHandler /* USB OTG FS */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word DCMI_IRQHandler /* DCMI */
.word 0 /* Reserved */
.word RNG_IRQHandler /* RNG */
.word FPU_IRQHandler /* FPU */
.word UART7_IRQHandler /* UART7 */
.word UART8_IRQHandler /* UART8 */
.word SPI4_IRQHandler /* SPI4 */
.word SPI5_IRQHandler /* SPI5 */
.word SPI6_IRQHandler /* SPI6 */
.word SAI1_IRQHandler /* SAI1 */
.word LTDC_IRQHandler /* LTDC */
.word LTDC_ER_IRQHandler /* LTDC error */
.word DMA2D_IRQHandler /* DMA2D */
.word SAI2_IRQHandler /* SAI2 */
.word QUADSPI_IRQHandler /* QUADSPI */
.word LPTIM1_IRQHandler /* LPTIM1 */
.word CEC_IRQHandler /* HDMI_CEC */
.word I2C4_EV_IRQHandler /* I2C4 Event */
.word I2C4_ER_IRQHandler /* I2C4 Error */
.word SPDIF_RX_IRQHandler /* SPDIF_RX */
.word 0 /* Reserved */
.word DFSDM1_FLT0_IRQHandler /* DFSDM1 Filter 0 global Interrupt */
.word DFSDM1_FLT1_IRQHandler /* DFSDM1 Filter 1 global Interrupt */
.word DFSDM1_FLT2_IRQHandler /* DFSDM1 Filter 2 global Interrupt */
.word DFSDM1_FLT3_IRQHandler /* DFSDM1 Filter 3 global Interrupt */
.word SDMMC2_IRQHandler /* SDMMC2 */
.word CAN3_TX_IRQHandler /* CAN3 TX */
.word CAN3_RX0_IRQHandler /* CAN3 RX0 */
.word CAN3_RX1_IRQHandler /* CAN3 RX1 */
.word CAN3_SCE_IRQHandler /* CAN3 SCE */
.word JPEG_IRQHandler /* JPEG */
.word MDIOS_IRQHandler /* MDIOS */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FMC_IRQHandler
.thumb_set FMC_IRQHandler,Default_Handler
.weak SDMMC1_IRQHandler
.thumb_set SDMMC1_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak ETH_IRQHandler
.thumb_set ETH_IRQHandler,Default_Handler
.weak ETH_WKUP_IRQHandler
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak DCMI_IRQHandler
.thumb_set DCMI_IRQHandler,Default_Handler
.weak RNG_IRQHandler
.thumb_set RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
.weak UART7_IRQHandler
.thumb_set UART7_IRQHandler,Default_Handler
.weak UART8_IRQHandler
.thumb_set UART8_IRQHandler,Default_Handler
.weak SPI4_IRQHandler
.thumb_set SPI4_IRQHandler,Default_Handler
.weak SPI5_IRQHandler
.thumb_set SPI5_IRQHandler,Default_Handler
.weak SPI6_IRQHandler
.thumb_set SPI6_IRQHandler,Default_Handler
.weak SAI1_IRQHandler
.thumb_set SAI1_IRQHandler,Default_Handler
.weak LTDC_IRQHandler
.thumb_set LTDC_IRQHandler,Default_Handler
.weak LTDC_ER_IRQHandler
.thumb_set LTDC_ER_IRQHandler,Default_Handler
.weak DMA2D_IRQHandler
.thumb_set DMA2D_IRQHandler,Default_Handler
.weak SAI2_IRQHandler
.thumb_set SAI2_IRQHandler,Default_Handler
.weak QUADSPI_IRQHandler
.thumb_set QUADSPI_IRQHandler,Default_Handler
.weak LPTIM1_IRQHandler
.thumb_set LPTIM1_IRQHandler,Default_Handler
.weak CEC_IRQHandler
.thumb_set CEC_IRQHandler,Default_Handler
.weak I2C4_EV_IRQHandler
.thumb_set I2C4_EV_IRQHandler,Default_Handler
.weak I2C4_ER_IRQHandler
.thumb_set I2C4_ER_IRQHandler,Default_Handler
.weak SPDIF_RX_IRQHandler
.thumb_set SPDIF_RX_IRQHandler,Default_Handler
.weak DFSDM1_FLT0_IRQHandler
.thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler
.weak DFSDM1_FLT1_IRQHandler
.thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler
.weak DFSDM1_FLT2_IRQHandler
.thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler
.weak DFSDM1_FLT3_IRQHandler
.thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler
.weak SDMMC2_IRQHandler
.thumb_set SDMMC2_IRQHandler,Default_Handler
.weak CAN3_TX_IRQHandler
.thumb_set CAN3_TX_IRQHandler,Default_Handler
.weak CAN3_RX0_IRQHandler
.thumb_set CAN3_RX0_IRQHandler,Default_Handler
.weak CAN3_RX1_IRQHandler
.thumb_set CAN3_RX1_IRQHandler,Default_Handler
.weak CAN3_SCE_IRQHandler
.thumb_set CAN3_SCE_IRQHandler,Default_Handler
.weak JPEG_IRQHandler
.thumb_set JPEG_IRQHandler,Default_Handler
.weak MDIOS_IRQHandler
.thumb_set MDIOS_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

152
firmware/hw_layer/ports/stm32/stm32f4/openblt/STM32F4xx.ld Normal file
View File

@ -0,0 +1,152 @@
/* Entry Point */
ENTRY(Reset_Handler)
/* This linker file is for OpenBLT bootloader. It compatible with any STM32F4xx
* that used in RusEFI project. So no CCM memory is defined. Also Flash is
* limited by 32K and first 64bytes of RAM are reserved for shared region
* between FW and bootloader */
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
SHARED (xrw) : ORIGIN = 0x20000000, LENGTH = 64
RAM (xrw) : ORIGIN = 0x20000040, LENGTH = 128K - 64
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32K
}
/* Define output sections */
SECTIONS
{
.shared (NOLOAD) :
{
. = ALIGN(4);
_sshared = .;
__shared_start__ = _sshared;
*(.shared)
*(.shared.*)
KEEP(*(.shared))
. = ALIGN(4);
_eshared = .;
__shared_end__ = _eshared;
} >SHARED
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

492
firmware/hw_layer/ports/stm32/stm32f4/openblt/lib/stm32f4xx_hal_conf.h Normal file
View File

@ -0,0 +1,492 @@
/**
******************************************************************************
* @file stm32f4xx_hal_conf_template.h
* @author MCD Application Team
* @brief HAL configuration template file.
* This file should be copied to the application folder and renamed
* to stm32f4xx_hal_conf.h.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_H
#define __STM32F4xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
/* #define HAL_ADC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
#define HAL_CAN_MODULE_ENABLED
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
/* #define HAL_UART_MODULE_ENABLED */
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
/* No default! Should be explictly defined in openblt/board.mk */
#if 0
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#endif
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* LAN8742A_PHY_ADDRESS Address*/
#define LAN8742A_PHY_ADDRESS 0U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x1FU) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0004U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0010U) /*!< PHY Duplex mask */
#define PHY_ISFR ((uint16_t)0x001DU) /*!< PHY Interrupt Source Flag register Offset */
#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f4xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
#include "stm32f4xx_hal_can_legacy.h"
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f4xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f4xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f4xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f4xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_FMPI2C_MODULE_ENABLED
#include "stm32f4xx_hal_fmpi2c.h"
#endif /* HAL_FMPI2C_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f4xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f4xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f4xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

730
firmware/hw_layer/ports/stm32/stm32f4/openblt/lib/system_stm32f4xx.c Normal file
View File

@ -0,0 +1,730 @@
/**
******************************************************************************
* @file system_stm32f4xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f4xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f4xx_system
* @{
*/
/** @addtogroup STM32F4xx_System_Private_Includes
* @{
*/
#include "stm32f4xx.h"
/* No default! Should be explictly defined in openblt/board.mk */
#if 0
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#endif
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
/* #define DATA_IN_ExtSRAM */
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
STM32F412Zx || STM32F412Vx */
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
/* #define DATA_IN_ExtSDRAM */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
STM32F479xx */
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000;
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
* @{
*/
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
static void SystemInit_ExtMemCtl(void);
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
/**
* @}
*/
/** @addtogroup STM32F4xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the FPU setting, vector table location and External memory
* configuration.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
SystemInit_ExtMemCtl();
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
* depends on the application requirements), user has to ensure that HSE_VALUE
* is same as the real frequency of the crystal used. Otherwise, this function
* may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00: /* HSI used as system clock source */
SystemCoreClock = HSI_VALUE;
break;
case 0x04: /* HSE used as system clock source */
SystemCoreClock = HSE_VALUE;
break;
case 0x08: /* PLL used as system clock source */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
SYSCLK = PLL_VCO / PLL_P
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
if (pllsource != 0)
{
/* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
else
{
/* HSI used as PLL clock source */
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
SystemCoreClock = pllvco/pllp;
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK frequency --------------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK frequency */
SystemCoreClock >>= tmp;
}
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx)
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f4xx.s before jump to main.
* This function configures the external memories (SRAM/SDRAM)
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
__IO uint32_t tmp = 0x00;
register uint32_t tmpreg = 0, timeout = 0xFFFF;
register __IO uint32_t index;
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
RCC->AHB1ENR |= 0x000001F8;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x00CCC0CC;
GPIOD->AFR[1] = 0xCCCCCCCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xAAAA0A8A;
/* Configure PDx pins speed to 100 MHz */
GPIOD->OSPEEDR = 0xFFFF0FCF;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00CC0CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA828A;
/* Configure PEx pins speed to 100 MHz */
GPIOE->OSPEEDR = 0xFFFFC3CF;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0xCCCCCCCC;
GPIOF->AFR[1] = 0xCCCCCCCC;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA800AAA;
/* Configure PFx pins speed to 50 MHz */
GPIOF->OSPEEDR = 0xAA800AAA;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0xCCCCCCCC;
GPIOG->AFR[1] = 0xCCCCCCCC;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0xAAAAAAAA;
/* Configure PGx pins speed to 50 MHz */
GPIOG->OSPEEDR = 0xAAAAAAAA;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
/* Connect PHx pins to FMC Alternate function */
GPIOH->AFR[0] = 0x00C0CC00;
GPIOH->AFR[1] = 0xCCCCCCCC;
/* Configure PHx pins in Alternate function mode */
GPIOH->MODER = 0xAAAA08A0;
/* Configure PHx pins speed to 50 MHz */
GPIOH->OSPEEDR = 0xAAAA08A0;
/* Configure PHx pins Output type to push-pull */
GPIOH->OTYPER = 0x00000000;
/* No pull-up, pull-down for PHx pins */
GPIOH->PUPDR = 0x00000000;
/* Connect PIx pins to FMC Alternate function */
GPIOI->AFR[0] = 0xCCCCCCCC;
GPIOI->AFR[1] = 0x00000CC0;
/* Configure PIx pins in Alternate function mode */
GPIOI->MODER = 0x0028AAAA;
/* Configure PIx pins speed to 50 MHz */
GPIOI->OSPEEDR = 0x0028AAAA;
/* Configure PIx pins Output type to push-pull */
GPIOI->OTYPER = 0x00000000;
/* No pull-up, pull-down for PIx pins */
GPIOI->PUPDR = 0x00000000;
/*-- FMC Configuration -------------------------------------------------------*/
/* Enable the FMC interface clock */
RCC->AHB3ENR |= 0x00000001;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
FMC_Bank5_6->SDCR[0] = 0x000019E4;
FMC_Bank5_6->SDTR[0] = 0x01115351;
/* SDRAM initialization sequence */
/* Clock enable command */
FMC_Bank5_6->SDCMR = 0x00000011;
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Delay */
for (index = 0; index<1000; index++);
/* PALL command */
FMC_Bank5_6->SDCMR = 0x00000012;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Auto refresh command */
FMC_Bank5_6->SDCMR = 0x00000073;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* MRD register program */
FMC_Bank5_6->SDCMR = 0x00046014;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Set refresh count */
tmpreg = FMC_Bank5_6->SDRTR;
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
/* Disable write protection */
tmpreg = FMC_Bank5_6->SDCR[0];
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001011;
FMC_Bank1->BTCR[3] = 0x00000201;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#if defined(STM32F469xx) || defined(STM32F479xx)
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001091;
FMC_Bank1->BTCR[3] = 0x00110212;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F469xx || STM32F479xx */
(void)(tmp);
}
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
/**
* @brief Setup the external memory controller.
* Called in startup_stm32f4xx.s before jump to main.
* This function configures the external memories (SRAM/SDRAM)
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
* @param None
* @retval None
*/
void SystemInit_ExtMemCtl(void)
{
__IO uint32_t tmp = 0x00;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
#if defined (DATA_IN_ExtSDRAM)
register uint32_t tmpreg = 0, timeout = 0xFFFF;
register __IO uint32_t index;
#if defined(STM32F446xx)
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
clock */
RCC->AHB1ENR |= 0x0000007D;
#else
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
clock */
RCC->AHB1ENR |= 0x000001F8;
#endif /* STM32F446xx */
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
#if defined(STM32F446xx)
/* Connect PAx pins to FMC Alternate function */
GPIOA->AFR[0] |= 0xC0000000;
GPIOA->AFR[1] |= 0x00000000;
/* Configure PDx pins in Alternate function mode */
GPIOA->MODER |= 0x00008000;
/* Configure PDx pins speed to 50 MHz */
GPIOA->OSPEEDR |= 0x00008000;
/* Configure PDx pins Output type to push-pull */
GPIOA->OTYPER |= 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOA->PUPDR |= 0x00000000;
/* Connect PCx pins to FMC Alternate function */
GPIOC->AFR[0] |= 0x00CC0000;
GPIOC->AFR[1] |= 0x00000000;
/* Configure PDx pins in Alternate function mode */
GPIOC->MODER |= 0x00000A00;
/* Configure PDx pins speed to 50 MHz */
GPIOC->OSPEEDR |= 0x00000A00;
/* Configure PDx pins Output type to push-pull */
GPIOC->OTYPER |= 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOC->PUPDR |= 0x00000000;
#endif /* STM32F446xx */
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x000000CC;
GPIOD->AFR[1] = 0xCC000CCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xA02A000A;
/* Configure PDx pins speed to 50 MHz */
GPIOD->OSPEEDR = 0xA02A000A;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00000CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA800A;
/* Configure PEx pins speed to 50 MHz */
GPIOE->OSPEEDR = 0xAAAA800A;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0xCCCCCCCC;
GPIOF->AFR[1] = 0xCCCCCCCC;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA800AAA;
/* Configure PFx pins speed to 50 MHz */
GPIOF->OSPEEDR = 0xAA800AAA;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0xCCCCCCCC;
GPIOG->AFR[1] = 0xCCCCCCCC;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0xAAAAAAAA;
/* Configure PGx pins speed to 50 MHz */
GPIOG->OSPEEDR = 0xAAAAAAAA;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx)
/* Connect PHx pins to FMC Alternate function */
GPIOH->AFR[0] = 0x00C0CC00;
GPIOH->AFR[1] = 0xCCCCCCCC;
/* Configure PHx pins in Alternate function mode */
GPIOH->MODER = 0xAAAA08A0;
/* Configure PHx pins speed to 50 MHz */
GPIOH->OSPEEDR = 0xAAAA08A0;
/* Configure PHx pins Output type to push-pull */
GPIOH->OTYPER = 0x00000000;
/* No pull-up, pull-down for PHx pins */
GPIOH->PUPDR = 0x00000000;
/* Connect PIx pins to FMC Alternate function */
GPIOI->AFR[0] = 0xCCCCCCCC;
GPIOI->AFR[1] = 0x00000CC0;
/* Configure PIx pins in Alternate function mode */
GPIOI->MODER = 0x0028AAAA;
/* Configure PIx pins speed to 50 MHz */
GPIOI->OSPEEDR = 0x0028AAAA;
/* Configure PIx pins Output type to push-pull */
GPIOI->OTYPER = 0x00000000;
/* No pull-up, pull-down for PIx pins */
GPIOI->PUPDR = 0x00000000;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
/*-- FMC Configuration -------------------------------------------------------*/
/* Enable the FMC interface clock */
RCC->AHB3ENR |= 0x00000001;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable SDRAM bank1 */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCR[0] = 0x00001954;
#else
FMC_Bank5_6->SDCR[0] = 0x000019E4;
#endif /* STM32F446xx */
FMC_Bank5_6->SDTR[0] = 0x01115351;
/* SDRAM initialization sequence */
/* Clock enable command */
FMC_Bank5_6->SDCMR = 0x00000011;
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Delay */
for (index = 0; index<1000; index++);
/* PALL command */
FMC_Bank5_6->SDCMR = 0x00000012;
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Auto refresh command */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCMR = 0x000000F3;
#else
FMC_Bank5_6->SDCMR = 0x00000073;
#endif /* STM32F446xx */
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* MRD register program */
#if defined(STM32F446xx)
FMC_Bank5_6->SDCMR = 0x00044014;
#else
FMC_Bank5_6->SDCMR = 0x00046014;
#endif /* STM32F446xx */
timeout = 0xFFFF;
while((tmpreg != 0) && (timeout-- > 0))
{
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
}
/* Set refresh count */
tmpreg = FMC_Bank5_6->SDRTR;
#if defined(STM32F446xx)
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
#else
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
#endif /* STM32F446xx */
/* Disable write protection */
tmpreg = FMC_Bank5_6->SDCR[0];
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
#endif /* DATA_IN_ExtSDRAM */
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
#if defined(DATA_IN_ExtSRAM)
/*-- GPIOs Configuration -----------------------------------------------------*/
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
RCC->AHB1ENR |= 0x00000078;
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
/* Connect PDx pins to FMC Alternate function */
GPIOD->AFR[0] = 0x00CCC0CC;
GPIOD->AFR[1] = 0xCCCCCCCC;
/* Configure PDx pins in Alternate function mode */
GPIOD->MODER = 0xAAAA0A8A;
/* Configure PDx pins speed to 100 MHz */
GPIOD->OSPEEDR = 0xFFFF0FCF;
/* Configure PDx pins Output type to push-pull */
GPIOD->OTYPER = 0x00000000;
/* No pull-up, pull-down for PDx pins */
GPIOD->PUPDR = 0x00000000;
/* Connect PEx pins to FMC Alternate function */
GPIOE->AFR[0] = 0xC00CC0CC;
GPIOE->AFR[1] = 0xCCCCCCCC;
/* Configure PEx pins in Alternate function mode */
GPIOE->MODER = 0xAAAA828A;
/* Configure PEx pins speed to 100 MHz */
GPIOE->OSPEEDR = 0xFFFFC3CF;
/* Configure PEx pins Output type to push-pull */
GPIOE->OTYPER = 0x00000000;
/* No pull-up, pull-down for PEx pins */
GPIOE->PUPDR = 0x00000000;
/* Connect PFx pins to FMC Alternate function */
GPIOF->AFR[0] = 0x00CCCCCC;
GPIOF->AFR[1] = 0xCCCC0000;
/* Configure PFx pins in Alternate function mode */
GPIOF->MODER = 0xAA000AAA;
/* Configure PFx pins speed to 100 MHz */
GPIOF->OSPEEDR = 0xFF000FFF;
/* Configure PFx pins Output type to push-pull */
GPIOF->OTYPER = 0x00000000;
/* No pull-up, pull-down for PFx pins */
GPIOF->PUPDR = 0x00000000;
/* Connect PGx pins to FMC Alternate function */
GPIOG->AFR[0] = 0x00CCCCCC;
GPIOG->AFR[1] = 0x000000C0;
/* Configure PGx pins in Alternate function mode */
GPIOG->MODER = 0x00085AAA;
/* Configure PGx pins speed to 100 MHz */
GPIOG->OSPEEDR = 0x000CAFFF;
/* Configure PGx pins Output type to push-pull */
GPIOG->OTYPER = 0x00000000;
/* No pull-up, pull-down for PGx pins */
GPIOG->PUPDR = 0x00000000;
/*-- FMC/FSMC Configuration --------------------------------------------------*/
/* Enable the FMC/FSMC interface clock */
RCC->AHB3ENR |= 0x00000001;
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001011;
FMC_Bank1->BTCR[3] = 0x00000201;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#if defined(STM32F469xx) || defined(STM32F479xx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
/* Configure and enable Bank1_SRAM2 */
FMC_Bank1->BTCR[2] = 0x00001091;
FMC_Bank1->BTCR[3] = 0x00110212;
FMC_Bank1E->BWTR[2] = 0x0fffffff;
#endif /* STM32F469xx || STM32F479xx */
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|| defined(STM32F412Zx) || defined(STM32F412Vx)
/* Delay after an RCC peripheral clock enabling */
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
/* Configure and enable Bank1_SRAM2 */
FSMC_Bank1->BTCR[2] = 0x00001011;
FSMC_Bank1->BTCR[3] = 0x00000201;
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
#endif /* DATA_IN_ExtSRAM */
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
(void)(tmp);
}
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

14
firmware/hw_layer/ports/stm32/stm32f4/openblt/port.mk Normal file
View File

@ -0,0 +1,14 @@
#|--------------------------------------------------------------------------------------|
#| Collect project files |
#|--------------------------------------------------------------------------------------|
# Collect all application files in the current directory and its subdirectories, but
# exclude flash-layout.c as this one is directly included in a source file, when used.
PROJ_FILES += $(filter-out $(OPENBLT_PORT_DIR)/flash_layout.c, $(call rwildcard, $(OPENBLT_PORT_DIR), *.c *.h *.s))
# reuse ST32F4xx HAL and CMSIS from one of OpenBLT exaples to avoid having copy in RusEFI git
PROJ_FILES += $(filter-out uip, $(call rwildcard, $(OPENBLT_TRGT_DIR)/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/lib/CMSIS/, *.c *.h *.s))
PROJ_FILES += $(filter-out uip, $(call rwildcard, $(OPENBLT_TRGT_DIR)/Demo/ARMCM4_STM32F4_Nucleo_F429ZI_GCC/Boot/lib/STM32F4xx_HAL_Driver/, *.c *.h *.s))
#|--------------------------------------------------------------------------------------|
#| Options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
BRDFLAGS = -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER

152
firmware/hw_layer/ports/stm32/stm32f7/openblt/STM32F7xx.ld Normal file
View File

@ -0,0 +1,152 @@
/* Entry Point */
ENTRY(Reset_Handler)
/* This linker file is for OpenBLT bootloader. It compatible with any STM32F7xx
* that used in RusEFI project. So no CCM memory is defined. Also Flash is
* limited by 32K and first 64bytes of RAM are reserved for shared region
* between FW and bootloader */
/* Highest address of the user mode stack */
_estack = 0x20020000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
SHARED (xrw) : ORIGIN = 0x20000000, LENGTH = 64
RAM (xrw) : ORIGIN = 0x20000040, LENGTH = 128K - 64
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 32K
}
/* Define output sections */
SECTIONS
{
.shared (NOLOAD) :
{
. = ALIGN(4);
_sshared = .;
__shared_start__ = _sshared;
*(.shared)
*(.shared.*)
KEEP(*(.shared))
. = ALIGN(4);
_eshared = .;
__shared_end__ = _eshared;
} >SHARED
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

461
firmware/hw_layer/ports/stm32/stm32f7/openblt/lib/stm32f7xx_hal_conf.h Normal file
View File

@ -0,0 +1,461 @@
/**
******************************************************************************
* @file stm32f7xx_hal_conf.h
* @brief HAL configuration file.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_CONF_H
#define __STM32F7xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
/* #define HAL_ADC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
#define HAL_CAN_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
/* #define HAL_UART_MODULE_ENABLED */
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
/* #define HAL_PCD_MODULE_ENABLED */
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_JPEG_MODULE_ENABLED */
/* #define HAL_MDIOS_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_I2C_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
/* No default! Should be explictly defined in openblt/board.mk */
#if 0
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#endif
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 0U
#define ART_ACCLERATOR_ENABLE 0U /* To enable instruction cache and prefetch */
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* LAN8742A_PHY_ADDRESS Address*/
#define LAN8742A_PHY_ADDRESS 0
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x00U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x01U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
#define PHY_ISFR ((uint16_t)0x000BU) /*!< PHY Interrupt Source Flag register Offset */
#define PHY_ISFR_INT4 ((uint16_t)0x000BU) /*!< PHY Link down inturrupt */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f7xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f7xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f7xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f7xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f7xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f7xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f7xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f7xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f7xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f7xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f7xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f7xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f7xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f7xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f7xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f7xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f7xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f7xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f7xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f7xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f7xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f7xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f7xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f7xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f7xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f7xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f7xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f7xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f7xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f7xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f7xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f7xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f7xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f7xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f7xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f7xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f7xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f7xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f7xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f7xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f7xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f7xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f7xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f7xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_JPEG_MODULE_ENABLED
#include "stm32f7xx_hal_jpeg.h"
#endif /* HAL_JPEG_MODULE_ENABLED */
#ifdef HAL_MDIOS_MODULE_ENABLED
#include "stm32f7xx_hal_mdios.h"
#endif /* HAL_MDIOS_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32f7xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

281
firmware/hw_layer/ports/stm32/stm32f7/openblt/lib/system_stm32f7xx.c Normal file
View File

@ -0,0 +1,281 @@
/**
******************************************************************************
* @file system_stm32f7xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f7xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f7xx_system
* @{
*/
/** @addtogroup STM32F7xx_System_Private_Includes
* @{
*/
#include "stm32f7xx.h"
/* No default! Should be explictly defined in openblt/board.mk */
#if 0
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#endif
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
This value must be a multiple of 0x200. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000;
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F7xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* Initialize the Embedded Flash Interface, the PLL and update the
* SystemFrequency variable.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* FPU settings ------------------------------------------------------------*/
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
#endif
/* Reset the RCC clock configuration to the default reset state ------------*/
/* Set HSION bit */
RCC->CR |= (uint32_t)0x00000001;
/* Reset CFGR register */
RCC->CFGR = 0x00000000;
/* Reset HSEON, CSSON and PLLON bits */
RCC->CR &= (uint32_t)0xFEF6FFFF;
/* Reset PLLCFGR register */
RCC->PLLCFGR = 0x24003010;
/* Reset HSEBYP bit */
RCC->CR &= (uint32_t)0xFFFBFFFF;
/* Disable all interrupts */
RCC->CIR = 0x00000000;
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
/* Get SYSCLK source -------------------------------------------------------*/
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case 0x00: /* HSI used as system clock source */
SystemCoreClock = HSI_VALUE;
break;
case 0x04: /* HSE used as system clock source */
SystemCoreClock = HSE_VALUE;
break;
case 0x08: /* PLL used as system clock source */
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
SYSCLK = PLL_VCO / PLL_P
*/
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
if (pllsource != 0)
{
/* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
else
{
/* HSI used as PLL clock source */
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
}
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
SystemCoreClock = pllvco/pllp;
break;
default:
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK frequency --------------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

16
firmware/hw_layer/ports/stm32/stm32f7/openblt/port.mk Normal file
View File

@ -0,0 +1,16 @@
#|--------------------------------------------------------------------------------------|
#| Collect port files |
#|--------------------------------------------------------------------------------------|
# Collect all application files in the current directory and its subdirectories, but
# exclude flash-layout.c as this one is directly included in a source file, when used.
PROJ_FILES += $(filter-out $(OPENBLT_PORT_DIR)/flash_layout.c, $(call rwildcard, $(OPENBLT_PORT_DIR), *.c *.h *.s))
# reuse ST32F7xx HAL and CMSIS from one of OpenBLT exaples to avoid having copy in RusEFI git
PROJ_FILES += $(filter-out uip, $(call rwildcard, $(OPENBLT_TRGT_DIR)/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/lib/CMSIS/, *.c *.h *.s))
PROJ_FILES += $(filter-out uip, $(call rwildcard, $(OPENBLT_TRGT_DIR)/Demo/ARMCM7_STM32F7_Nucleo_F767ZI_GCC/Boot/lib/STM32F7xx_HAL_Driver/, *.c *.h *.s))
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/lib/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_can.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Demo/ARMCM7_STM32F7_Nucleo_F746ZG_GCC/Boot/lib/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_can.h)
#|--------------------------------------------------------------------------------------|
#| Specific options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
PORTFLAGS = -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER

227
firmware/openblt.mk Normal file
View File

@ -0,0 +1,227 @@
#****************************************************************************************
#| Description: Makefile for GNU ARM Embedded toolchain.
#| File Name: makefile
#|
#|---------------------------------------------------------------------------------------
#| C O P Y R I G H T
#|---------------------------------------------------------------------------------------
#| Copyright (c) 2021 by Feaser http://www.feaser.com All rights reserved
#|
#|---------------------------------------------------------------------------------------
#| L I C E N S E
#|---------------------------------------------------------------------------------------
#| This file is part of OpenBLT. OpenBLT is free software: you can redistribute it and/or
#| modify it under the terms of the GNU General Public License as published by the Free
#| Software Foundation, either version 3 of the License, or (at your option) any later
#| version.
#|
#| OpenBLT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
#| without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
#| PURPOSE. See the GNU General Public License for more details.
#|
#| You have received a copy of the GNU General Public License along with OpenBLT. It
#| should be located in ".\Doc\license.html". If not, contact Feaser to obtain a copy.
#|
#****************************************************************************************
SHELL = sh
#|--------------------------------------------------------------------------------------|
#| Configure project name |
#|--------------------------------------------------------------------------------------|
PROJ_NAME=openblt_$(PROJECT_BOARD)
#|--------------------------------------------------------------------------------------|
#| Configure tool path |
#|--------------------------------------------------------------------------------------|
# Configure the path to where the arm-none-eabi-gcc program is located. If the program
# is available on the path, then the TOOL_PATH variable can be left empty.
# Make sure to add a fordward slash at the end. Note that on Windows it should be in the
# 8.3 short pathname format with forward slashes. To obtain the pathname in the 8.3
# format, open the directory in the Windows command prompt and run the following command:
# cmd /c for %A in ("%cd%") do @echo %~sA
TOOL_PATH=$(TRGT)
#|--------------------------------------------------------------------------------------|
#| Configure sources paths |
#|--------------------------------------------------------------------------------------|
PROJECT_DIR=.
OPENBLT_TRGT_DIR=$(PROJECT_DIR)/ext/openblt/Target
OPENBLT_BOARD_DIR=$(PROJECT_DIR)/config/boards/$(PROJECT_BOARD)/openblt
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
OPENBLT_PORT_DIR=$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/openblt
else ifeq ($(PROJECT_CPU),ARCH_STM32F7)
OPENBLT_PORT_DIR=$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/openblt
else ifeq ($(PROJECT_CPU),ARCH_STM32H7)
OPENBLT_PORT_DIR=$(PROJECT_DIR)/hw_layer/ports/stm32/stm32h7/openblt
endif
#|--------------------------------------------------------------------------------------|
#| Collect helpers |
#|--------------------------------------------------------------------------------------|
# Recursive wildcard function implementation. Example usages:
# $(call rwildcard, , *.c *.h)
# --> Returns all *.c and *.h files in the current directory and below
# $(call rwildcard, /lib/, *.c)
# --> Returns all *.c files in the /lib directory and below
rwildcard = $(strip $(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d)))
#|--------------------------------------------------------------------------------------|
#| Include port and board files |
#|--------------------------------------------------------------------------------------|
PROJ_FILES=
include $(OPENBLT_PORT_DIR)/port.mk
include $(OPENBLT_BOARD_DIR)/board.mk
#|--------------------------------------------------------------------------------------|
#| Collect bootloader core files |
#|--------------------------------------------------------------------------------------|
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/*.h)
# CPU-dependent sources
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
# Collect bootloader port files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM4_STM32F4/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM4_STM32F4/*.h)
# Collect bootloader port compiler specific files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM4_STM32F4/GCC/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM4_STM32F4/GCC/*.h)
# LD file
LFLAGS = -Wl,-script="$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f4/openblt/STM32F4xx.ld"
# Port specific options
PORTFLAGS += -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16
else ifeq ($(PROJECT_CPU),ARCH_STM32F7)
# Collect bootloader port files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32F7/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32F7/*.h)
# Collect bootloader port compiler specific files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32F7/GCC/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32F7/GCC/*.h)
# LD file
LFLAGS += -Wl,-script="$(PROJECT_DIR)/hw_layer/ports/stm32/stm32f7/openblt/STM32F7xx.ld"
# Port specific options
PORTFLAGS = -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-sp-d16
else ifeq ($(PROJECT_CPU),ARCH_STM32H7)
# Collect bootloader port files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32H7/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32H7/*.h)
# Collect bootloader port compiler specific files
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32H7/GCC/*.c)
PROJ_FILES += $(wildcard $(OPENBLT_TRGT_DIR)/Source/ARMCM7_STM32H7/GCC/*.h)
# LD file
LFLAGS = -Wl,-script="$(PROJECT_DIR)/hw_layer/ports/stm32/stm32h7/openblt/STM32H7xx.ld"
# Port specific options
PORTFLAGS += -mcpu=cortex-m7 -mthumb -mfloat-abi=hard -mfpu=fpv5-d16
endif
OPTFLAGS = -Os
STDFLAGS = -fno-strict-aliasing
STDFLAGS += -fdata-sections -ffunction-sections -Wall -g3
CFLAGS = $(PORTFLAGS) $(BRDFLAGS) $(STDFLAGS) $(OPTFLAGS)
CFLAGS += -DUSE_FULL_LL_DRIVER -DUSE_HAL_DRIVER -DSTM32F767xx
CFLAGS += $(INC_PATH)
AFLAGS = $(CFLAGS)
LFLAGS += $(PORTFLAGS) $(BRDFLAGS) $(STDFLAGS) $(OPTFLAGS)
#|--------------------------------------------------------------------------------------|
#| Common options for toolchain binaries |
#|--------------------------------------------------------------------------------------|
LFLAGS += -Wl,-Map=$(BIN_PATH)/$(PROJ_NAME).map
LFLAGS += -specs=nano.specs -Wl,--gc-sections $(LIB_PATH)
OFLAGS = -O srec
ODFLAGS = -x
SZFLAGS = -B -d
RMFLAGS = -f
#|--------------------------------------------------------------------------------------|
#| Toolchain binaries |
#|--------------------------------------------------------------------------------------|
RM = rm
CC = $(TOOL_PATH)arm-none-eabi-gcc
LN = $(TOOL_PATH)arm-none-eabi-gcc
OC = $(TOOL_PATH)arm-none-eabi-objcopy
OD = $(TOOL_PATH)arm-none-eabi-objdump
AS = $(TOOL_PATH)arm-none-eabi-gcc
SZ = $(TOOL_PATH)arm-none-eabi-size
#|--------------------------------------------------------------------------------------|
#| Filter project files
#|--------------------------------------------------------------------------------------|
PROJ_ASRCS = $(filter %.s,$(foreach file,$(PROJ_FILES),$(notdir $(file))))
PROJ_CSRCS = $(filter %.c,$(foreach file,$(PROJ_FILES),$(notdir $(file))))
PROJ_CHDRS = $(filter %.h,$(foreach file,$(PROJ_FILES),$(notdir $(file))))
#|--------------------------------------------------------------------------------------|
#| Set important path variables |
#|--------------------------------------------------------------------------------------|
VPATH = $(foreach path,$(sort $(foreach file,$(PROJ_FILES),$(dir $(file)))) $(subst \,/,$(OBJ_PATH)),$(path) :)
OBJ_PATH = $(PROJECT_DIR)/build-openblt/obj
BIN_PATH = $(PROJECT_DIR)/build-openblt
INC_PATH = $(patsubst %/,%,$(patsubst %,-I%,$(sort $(foreach file,$(filter %.h,$(PROJ_FILES)),$(dir $(file))))))
LIB_PATH =
#|--------------------------------------------------------------------------------------|
#| Define targets |
#|--------------------------------------------------------------------------------------|
AOBJS = $(patsubst %.s,%.o,$(PROJ_ASRCS))
COBJS = $(patsubst %.c,%.o,$(PROJ_CSRCS))
#|--------------------------------------------------------------------------------------|
#| Make ALL |
#|--------------------------------------------------------------------------------------|
.PHONY: all
all: $(BIN_PATH)/$(PROJ_NAME).srec $(BIN_PATH)/$(PROJ_NAME).hex $(BIN_PATH)/$(PROJ_NAME).bin
$(BIN_PATH)/$(PROJ_NAME).srec : $(BIN_PATH)/$(PROJ_NAME).elf
@mkdir -p $(@D)
@$(OC) $< $(OFLAGS) $@
@$(OD) $(ODFLAGS) $< > $(BIN_PATH)/$(PROJ_NAME).map
@echo +++ Summary of memory consumption:
@$(SZ) $(SZFLAGS) $<
@echo +++ Build complete [$(notdir $@)]
$(BIN_PATH)/$(PROJ_NAME).hex : $(BIN_PATH)/$(PROJ_NAME).elf
@mkdir -p $(@D)
@$(OC) -O ihex $< $@
$(BIN_PATH)/$(PROJ_NAME).bin : $(BIN_PATH)/$(PROJ_NAME).elf
@mkdir -p $(@D)
@$(OC) -O binary $< $@
$(BIN_PATH)/$(PROJ_NAME).elf : $(AOBJS) $(COBJS)
@mkdir -p $(@D)
@echo +++ Linking [$(notdir $@)]
@echo $(patsubst %.o,$(OBJ_PATH)/%.o,$(^F))
@$(LN) $(LFLAGS) -o $@ $(patsubst %.o,$(OBJ_PATH)/%.o,$(^F)) $(LIBS)
#|--------------------------------------------------------------------------------------|
#| Compile and assemble |
#|--------------------------------------------------------------------------------------|
$(AOBJS): %.o: %.s $(PROJ_CHDRS) $(OBJ_PATH)
@mkdir -p $(@D)
@echo +++ Assembling [$(notdir $<)]
@$(AS) $(AFLAGS) -c $< -o $(OBJ_PATH)/$(@F)
$(COBJS): %.o: %.c $(PROJ_CHDRS) $(OBJ_PATH)
@mkdir -p $(@D)
@echo +++ Compiling [$(notdir $<)]
@$(CC) $(CFLAGS) -c $< -o $(OBJ_PATH)/$(@F)
$(OBJ_PATH):
@echo Compiler Options
@echo $(CC) -c $(CFLAGS) main.c -o main.o
@mkdir -p $(OBJ_PATH)
#|--------------------------------------------------------------------------------------|
#| Make CLEAN |
#|--------------------------------------------------------------------------------------|
.PHONY: clean
clean:
@echo +++ Cleaning build environment
@$(RM) $(RMFLAGS) $(foreach file,$(AOBJS),$(OBJ_PATH)/$(file))
@$(RM) $(RMFLAGS) $(foreach file,$(COBJS),$(OBJ_PATH)/$(file))
@$(RM) $(RMFLAGS) $(patsubst %.o,%.lst,$(foreach file,$(COBJS),$(OBJ_PATH)/$(file)))
@$(RM) $(RMFLAGS) $(BIN_PATH)/$(PROJ_NAME).elf $(BIN_PATH)/$(PROJ_NAME).map
@$(RM) $(RMFLAGS) $(BIN_PATH)/$(PROJ_NAME).srec
@$(RM) $(RMFLAGS) $(BIN_PATH)/$(PROJ_NAME).bin
@$(RM) $(RMFLAGS) $(BIN_PATH)/$(PROJ_NAME).hex
@echo +++ Clean complete

BIN
misc/encedo_hex2dfu/hex2dfu.bin
View File

Binary file not shown.