auto-sync

firmware/console/tunerstudio/tunerstudio_configuration.h

@@ -69,6 +69,7 @@ typedef struct {
 	unsigned int isCltError : 1; // bit 1
 	unsigned int isMapError : 1; // bit 2
 	unsigned int isIatError : 1; // bit 3
+	unsigned int isAcSwitchEngaged : 1; // bit 4
 	int tsConfigVersion;
 	egt_values_s egtValues;
 	int unused3[3];

firmware/controllers/algo/auto_generated_enums.cpp

@@ -37,6 +37,8 @@ case GPIO_7:
   return "GPIO_7";
 case FAN_RELAY:
   return "FAN_RELAY";
+case AC_RElAY:
+	return "AC_RElAY";
 case INJECTOR_8_OUTPUT:
   return "INJECTOR_8_OUTPUT";
 case GPIO_6:

firmware/controllers/algo/engine_configuration.cpp

@@ -297,6 +297,9 @@ void setDefaultConfiguration(engine_configuration_s *engineConfiguration, board_
 //	engineConfiguration->idleMode = IM_AUTO;
 	engineConfiguration->idleMode = IM_MANUAL;
 
+	boardConfiguration->acRelayPin = GPIO_UNASSIGNED;
+	boardConfiguration->acRelayPinMode = OM_DEFAULT;
+
 #if EFI_PROD_CODE
 	engineConfiguration->digitalChartSize = 300;
 #else

firmware/controllers/algo/engine_configuration.h

@@ -144,6 +144,9 @@ typedef struct {
 	brain_pin_e electronicThrottlePin1;
 	pin_output_mode_e electronicThrottlePin1Mode;
 
+	/**
+	 * Idle switch input signal
+	 */
 	brain_pin_e idleSwitchPin;
 	pin_input_mode_e idleSwitchPinMode;
 
@@ -233,7 +236,11 @@ typedef struct {
 	 */
 	float idleSolenoidPwm;
 
-	int unusedbs[51];
+	brain_pin_e acRelayPin;
+	pin_output_mode_e acRelayPinMode;
+
+
+	int unusedbs[39];
 
 	le_formula_t le_formulas[LE_COMMAND_COUNT];
 
@@ -497,7 +504,12 @@ typedef struct {
 
 	int targetIdleRpm;
 
-	int unused3[92];
+	/**
+	 * A/C button input handled as analog input
+	 */
+	adc_channel_e acSwitchAdc;
+
+	int unused3[91];
 
 } engine_configuration_s;
 

firmware/controllers/algo/io_pins.h

@@ -124,6 +124,7 @@ typedef enum {
 	FUEL_PUMP_RELAY,
 	FAN_RELAY,
 	O2_HEATER,
+	AC_RElAY,
 
 	SPI_CS_1,
 	SPI_CS_2,

firmware/controllers/flash_main.h

@@ -12,7 +12,7 @@
 #include "engine_configuration.h"
 #include "engine.h"
 
-#define FLASH_DATA_VERSION 5472
+#define FLASH_DATA_VERSION 5484
 
 void readFromFlash(void);
 void initFlash(Engine *engine);

firmware/controllers/settings.cpp

@@ -332,6 +332,10 @@ static void printTemperatureInfo(void) {
 	scheduleMsg(&logger, "fan=%s @ %s", boolToString(getOutputPinValue(FAN_RELAY)),
 			hwPortname(boardConfiguration->fanPin));
 
+	scheduleMsg(&logger, "A/C relay=%s @ %s", boolToString(getOutputPinValue(AC_RElAY)),
+			hwPortname(boardConfiguration->acRelayPin));
+
+
 #if EFI_ANALOG_INPUTS
 	scheduleMsg(&logger, "base cranking fuel %f", engineConfiguration->crankingSettings.baseCrankingFuel);
 #endif

firmware/hw_layer/io_pins.c

@@ -156,6 +156,7 @@ void initOutputPins(void) {
 	outputPinRegisterExt2("fan relay", FAN_RELAY, boardConfiguration->fanPin, &DEFAULT_OUTPUT);
 	outputPinRegisterExt2("o2 heater", O2_HEATER, boardConfiguration->o2heaterPin, &DEFAULT_OUTPUT);
 	outputPinRegisterExt2("trg_err", LED_TRIGGER_ERROR, boardConfiguration->triggerErrorPin, &boardConfiguration->triggerErrorPinMode);
+	outputPinRegisterExt2("A/C relay", AC_RElAY, boardConfiguration->acRelayPin, &boardConfiguration->acRelayPinMode);
 
 	initialLedsBlink();