manual code generation because simulator is still broken

This commit is contained in:
rusefillc 2024-03-26 23:54:41 -04:00
parent eba8aab1b7
commit e88d22c48e
1 changed files with 10 additions and 3 deletions

View File

@ -132,7 +132,7 @@ struct cranking_parameters_s {
*/
float baseFuel;
/**
* This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450rpm.
* This sets the RPM limit below which the ECU will use cranking fuel and ignition logic, typically this is around 350-450rpm.
* set cranking_rpm X
* units: RPM
* offset 4
@ -710,7 +710,7 @@ struct engine_configuration_s {
/**
* Shall we display real life signal or just the part consumed by trigger decoder.
* Applies to both trigger and cam/vvt input.
*
*
* enable logic_level_trigger
offset 188 bit 20 */
bool displayLogicLevelsInEngineSniffer : 1 {};
@ -4701,11 +4701,18 @@ struct engine_configuration_s {
* offset 4585
*/
pin_mode_e spi6MosiMode;
Gpio camSimulatorPin;
/**
* need 4 byte alignment
* units: units
* offset 3986
*/
uint8_t alignmentFill_at_3986[2];
/**
* units: units
* offset 4586
*/
uint8_t unusedOftenChangesDuringFirmwareUpdate[120];
uint8_t unusedOftenChangesDuringFirmwareUpdate[116];
/**
* need 4 byte alignment
* units: units