0b8dc1f59d
m74_9
2023-01-01 15:58:52 -05:00
064bce7696
Epic: daily drive Nissan #4865
2022-12-02 20:15:08 -05:00
86ee8162eb
8chan
2022-12-01 23:07:13 -05:00
d144248a6f
fix simulator build (via MinGW) ( #4799 )
...
* firmware: kill -9 dead hipLastExecutionCount
* firmware: pin_repository C includes efi_gpio.h
* firmware: controllers: tidy #endif comments
* firmware: primary_pins logic depends EFI_GPIO_HARDWARE
* firmware: only print ADC info if HAL_USE_ADC
* firmware: digital_input: tidy #endif comments
* firmware: digital_input logic depends on e.g. HAL_USE_ADC
* firmware: digital_input logic depends !EFI_SIMULATOR
* firmware: digital_input logic depends e.g. HAL_USE_ADC
* simulator: Makefile includes RUSEFI_LIB_C as CSRC
* Revert "GHA/build-firmware: pin agents to Ubuntu 20.04 (#4793 )"
This reverts commit cb2477be6c
2022-11-18 23:43:43 -05:00
cb2477be6c
GHA/build-firmware: pin agents to Ubuntu 20.04 ( #4793 )
...
resolves #4791
2022-11-18 08:21:32 -05:00
77b9399179
i should never play lottery
2022-11-16 23:34:30 -05:00
800b6b7a95
https://github.com/rusefi/hellenNA6_issues/issues/35
2022-11-09 14:41:21 -05:00
6a53159c0f
use rusEFI pruned ARM GCC 11.3 ( #4763 )
...
* use rusEFI pruned ARM GCC 11.3
* fix Firmware at GHA: avoid dash
* avoid double decompress in provide_gcc.sh
also ensure TMP_DIR, avoiding strange woes about GHA CI: ./firmware/provide_gcc.sh: 23: pushd: not found
2022-11-09 07:18:40 -05:00
944f64f3b1
gcc11 ( #4680 )
...
* gcc11
* Gcc 11 hw ci (#4754 )
* hw ci -> gcc11
* setup script
* GCC 11.3 (#4757 )
* setup_linux_environment.sh tar uses --auto-compress
* use ARM GCC 11.3
* gcc11 #4680
* update build-primary-bundle GCC to v11.3 (#4758 )
* factor GCC toolchain provider (#4761 )
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
Co-authored-by: Matthew Kennedy <matthewkennedy@outlook.com>
Co-authored-by: Nathan Schulte <8540239+nmschulte@users.noreply.github.com>
2022-11-08 18:10:53 -05:00
b2a5492d16
GM
2022-11-04 12:47:20 -04:00
ca7bfe77cb
need nissan
2022-11-01 21:31:35 -04:00
ced5db5d53
gcc 10 ( #4641 )
...
* scripts
* change check version
* disable inlining
* all the spots
* it's funny that this works with the wrong file extension
* bootloader
* hardware ci runs gcc 10
2022-10-18 22:30:16 -04:00
582cc4a10e
so much weird
2022-10-18 22:29:43 -04:00
ed16771d36
Stub f429 ( #4678 )
...
* stub 429
* build cfg
* s
2022-10-18 21:19:25 -04:00
85ebb112b5
enable proteus, select compiler in script ( #4675 )
...
* enable proteus, select compiler in script
* do it the new way
* blah
* old fashioned printf debugging
* sleep longer so we get battery voltage, and not on proteus
* firmware yaml
* remove print, it works!
2022-10-17 15:36:02 -04:00
c7b1333795
Enable ethernet on one or both nucleo boards #4665
2022-10-16 22:36:31 -04:00
fe17ed2a7d
hellen72
2022-10-05 23:47:12 -04:00
1c80310dc1
skip-rate
2022-10-01 21:54:22 -04:00
2532694521
need Proteus QC
2022-09-30 14:43:07 -04:00
b41a614113
miata
2022-09-19 18:41:10 -04:00
0195fd489a
i like it this way
2022-08-31 20:43:07 -04:00
a7786c5971
please always for now
2022-08-21 21:55:14 -04:00
79fb94ead0
please MRE
2022-08-18 21:11:19 -04:00
4fd0bff598
upload ini from firmware build #4456
2022-08-18 10:19:09 -04:00
42fb3e2a4e
upload ini from firmware build #4456
2022-08-17 21:32:10 -04:00
2217dcea42
upload ini from firmware build #4456
2022-08-17 21:00:49 -04:00
7408e62d3f
upload ini from firmware build ( #4456 )
2022-08-17 20:41:06 -04:00
cdb71385e2
upload ini from firmware build ( #4456 )
2022-08-17 20:40:39 -04:00
f177d96a4e
upload ini from firmware build #4456
...
debug
2022-08-17 19:57:04 -04:00
3e09a6cf35
upload ini from firmware build ( #4456 )
2022-08-17 18:29:07 -04:00
65220dbbe1
reducing inconsistency between gen scripts: moving cypress
2022-08-16 16:18:55 -04:00
aee946799a
reducing inconsistency between gen scripts: moving cypress
2022-08-16 15:43:03 -04:00
8de99093a7
reducing inconsistency, renaming .ini file
2022-08-16 11:20:51 -04:00
7062061bb2
reducing inconsistency, renaming signature header
2022-08-16 11:08:24 -04:00
02fe0e6e14
reducing inconsistency, renaming .ini file
2022-08-16 10:26:31 -04:00
49d937d881
need quicker builds for now
2022-08-16 09:59:38 -04:00
3298e1451b
uniform current folder strategy
2022-08-15 13:23:13 -04:00
66a3e11048
need 100% for now
2022-08-09 14:16:11 -04:00
9e61f7b0b3
350z: more canned tune #4416
2022-08-05 23:28:53 -04:00
e459300897
Bump actions/setup-java from 1 to 3 ( #4388 )
...
* Bump actions/setup-java from 1 to 3
Bumps [actions/setup-java](https://github.com/actions/setup-java ) from 1 to 3.
- [Release notes](https://github.com/actions/setup-java/releases )
- [Commits](https://github.com/actions/setup-java/compare/v1...v3 )
---
updated-dependencies:
- dependency-name: actions/setup-java
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
* Bump actions/setup-java from 1 to 3 #4388
* Bump actions/setup-java from 1 to 3 #4388
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
2022-07-28 04:00:13 -04:00
c635774680
Bump actions/upload-artifact from 2 to 3 ( #4390 )
...
Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact ) from 2 to 3.
- [Release notes](https://github.com/actions/upload-artifact/releases )
- [Commits](https://github.com/actions/upload-artifact/compare/v2...v3 )
---
updated-dependencies:
- dependency-name: actions/upload-artifact
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-07-27 13:10:58 -04:00
15f1d68000
Bump actions/checkout from 2 to 3 ( #4389 )
...
Bumps [actions/checkout](https://github.com/actions/checkout ) from 2 to 3.
- [Release notes](https://github.com/actions/checkout/releases )
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md )
- [Commits](https://github.com/actions/checkout/compare/v2...v3 )
---
updated-dependencies:
- dependency-name: actions/checkout
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-07-27 12:47:07 +03:00
6d2261791d
Hellen88bmw ( #4378 )
...
* progress
* progress
* progress
Co-authored-by: rusefillc <sdfsdfqsf2334234234>
2022-07-26 06:13:36 -04:00
f9dae240da
we want this one alive
2022-07-08 18:30:34 -04:00
0cc1f729c4
Write hard faults to backup ram, print on next boot ( #4324 )
...
* use backup ram, hard fault handler improvement
* wire it up
* upload elf
* s
* I guess I'll just use strncpy
* s
* what is it even complaining about?
* neat, we don't need a cast
* cypress and kinetis
* cleanup
* ci
* guard for tests
2022-07-07 15:14:31 -04:00
6eecf5a162
hellen121vag config revival
2022-06-13 10:13:34 -04:00
88647fa69a
GHA limit is somewhere not too far
2022-06-10 12:30:28 -04:00
cec0976fa1
48way binary
2022-05-30 15:56:33 -04:00
c7aa6f3d43
console uses .hex Looks like I broke MRE and Proteus with OpenBLT #4199
...
steps towards proper script in HW CI
2022-05-25 10:44:34 -04:00
5d047e2de4
firmware actually does not run console unit tests
2022-05-24 22:58:43 -04:00
d6d9fae705
gm-e67
2022-05-21 10:42:23 -04:00
3aba5a7b49
sorry guys
2022-05-18 23:22:49 -04:00
67d12823f0
returning skip ratio
2022-05-08 10:28:31 -04:00
75a722666d
proteus_f4_hardware_QC_special_build
2022-05-04 05:30:04 -04:00
ae9f4d74a6
nissan please
2022-04-23 19:52:12 -04:00
e58de47508
https://github.com/rusefi/hellen154hyundai/issues/55
2022-04-22 01:26:22 -04:00
15d3172bb7
logging of live data structs was: data points #3614
...
better solution for total model buffer size
2022-04-16 20:34:17 -04:00
757a2f3bd1
step towards gradle folder structure
...
a bit more of skip rate
2022-04-15 10:55:46 -04:00
2c8b050d4e
using unique file names to reduce confusion
2022-04-11 13:54:31 -04:00
f3da426272
stub tdg pdm ( #4025 )
...
* stub tdg pdm
* mk
* happy build
* some actual config
* CAN
* script
* chmod
* skip rate now that we know it builds
2022-03-30 19:18:18 -04:00
7be1e3cb5e
TS ini file extension missing in hellenNA8_96 bundle fix #3938
2022-02-15 16:49:34 -05:00
a6ac175315
core8
2022-02-11 16:06:00 -05:00
48dbf675d8
fixing harley81
2022-02-09 22:22:47 -05:00
719e13c0f5
fixing harley81
2022-02-09 21:31:17 -05:00
1c39736aab
4 chan & 81hd
2022-02-09 19:59:08 -05:00
9de9517262
human-readable name
2022-01-26 16:27:17 -05:00
9215d1b2dd
Don't skip firmware jobs if workflow is run manually ( #3821 )
...
* add workflow dispatch and check
* single quotes
* undo hack
2022-01-20 17:56:09 -05:00
7f465cd2ee
Well, for release builds we want to build everything? #3817
...
## January 2022 Release - "Tin Can"
2022-01-19 22:09:52 -05:00
7c5c82f14b
Randomly skip firmware build jobs ( #3788 )
...
* skip
* remove name
* use single quotes
* flip sign
* skip before checkout
* oops
2022-01-13 13:17:32 -05:00
d7f38601b9
GDI red FATAL led on cranking #3766
2022-01-10 16:42:31 -05:00
f106afd9e1
F429 discovery ram dev ( #3761 )
...
* stm32f429-discovery: mostly copy-paste from ChibiOS-Contrib
* STM32F429-discovery has external SDRAM
* F429-Discovery: add simple memory test for SDRAM (disabled)
* Revert "random piece of https://github.com/dron0gus/rusefi/tree/f429-discovery-ram-dev "
This reverts commit c58a2f5ecb
2022-01-10 16:14:39 -05:00
32086b58a8
Live Data progress
2022-01-06 15:20:58 -05:00
506bae5c14
AlphaX
2022-01-05 14:12:12 -05:00
90147dd74b
GHA execution throttling #3739
2022-01-04 13:48:26 -05:00
166f4e6cc8
GHA execution throttling #3739
2022-01-04 13:40:02 -05:00
22aa721c46
GHA execution throttling #3739
2022-01-04 12:05:25 -05:00
0c22c9ffb3
GHA execution throttling #3739
2022-01-04 11:51:06 -05:00
d01e04f507
HellenNA8_96 config folder #3724
2021-12-30 00:15:40 -05:00
4f7e821db2
that line was getting a bit long
2021-12-01 22:38:17 -05:00
aa50e179d5
shall we welcome hellen81?
2021-12-01 22:07:25 -05:00
78e3c0c760
Use SSH to upload firmware ( #3394 )
...
* install sshpass instead of ncftp
* use ssh
* change env vars
* fix checks and sftp>ssh
2021-10-22 16:36:15 -04:00
f7f3970a15
docs
2021-10-18 22:43:03 -04:00
6f2b4a91dc
hellen88bmw
2021-10-11 20:58:10 -04:00
8b22785477
Reduce scripts code duplication between matrix and primary build #3182
2021-08-20 15:34:21 -04:00
a299f2fef7
NB1
2021-08-07 13:02:39 -04:00
f1c39bfd93
hellen154hyundai
2021-08-03 22:26:33 -04:00
73b39b794f
are we all drunk today?
2021-07-30 20:22:32 -04:00
7dc3ba848f
Try installing software explicitly ( #3083 )
...
* try installing software
* no sude
* move install up
* install in hw ci
* install in simulator build
2021-07-30 20:18:53 -04:00
741849ebaa
RUSEFI MSD to contain bundle-specific URL #2848
...
sooo confusing
2021-07-30 19:53:49 -04:00
10dba2810a
refactoring: explicit job names
2021-07-30 19:30:12 -04:00
5aa18d8537
Add mtools ( #3082 )
2021-07-30 18:46:52 -04:00
ec4ffa6c3f
atlas build stub ( #3065 )
...
* add atlas configs
* script
* prepend
* s
* stubs
* apparently board.mk can't set cpu
* s
2021-07-26 01:04:58 -04:00
a4113f7ccc
shorter names ( #3056 )
2021-07-24 16:23:03 -04:00
34304ecb7e
Fix ini name (hellen128mercedes drama) ( #3020 )
...
* fix
* redo yaml pram
* git add
* poke
2021-07-21 19:23:17 -04:00
fe6582bd6f
Revert "Fix hellen again ( #2993 )"
...
This reverts commit 4cbeec58
2021-07-20 13:30:06 -04:00
4cbeec58b2
Fix hellen again ( #2993 )
...
* fix comment
* unfix
* actual fix I think
* test poke
2021-07-20 09:06:03 -04:00
2b1388384a
Fix hellen128mercedes ( #2988 )
2021-07-19 22:00:09 -04:00
90ba93c71b
Fix hellen128mercedes ( #2988 )
...
* switch back
* submo bump
* fix maybe
2021-07-19 00:12:14 -04:00
eba42f097e
Hellen128 doesn't have .ini in bundle #2981
2021-07-18 16:13:41 -04:00
1bf88120e2
Hellen128 doesn't have .ini in bundle #2981
2021-07-18 15:52:21 -04:00
45c32638e0
Fix #2981 ( #2983 )
...
* get yq from GH releases
* submo bump
* little hack
* didn't work, fix properly
* oh roight
* got it backwards
* poke
2021-07-17 21:41:45 -04:00
d4beefa8f3
Proteus legacy vs. non-legacy F7 ( #2657 )
...
* proteus f7 is not necessarily legacy
* script
* don't need that any more
* yaml and script
* rename
2021-05-08 18:44:19 -04:00
379b3dffb8
proteus_f7_hardware_QC_special_build
2021-05-08 10:32:21 -04:00
0799bb719f
h121 poke
2021-05-01 20:43:09 -04:00
6c6d7f7cf9
h64 is asking for a poke
2021-04-29 23:00:22 -04:00
9585cbe09a
hellen64 scripts and pinout #2565
2021-04-19 09:12:47 -04:00
8c0cff1b1b
hellen64 scripts and pinout #2565
2021-04-18 22:03:43 -04:00
ca612f7a82
Revert "would separating installs make error more obvious?"
...
This reverts commit e59d2c32
2021-03-13 16:34:08 -05:00
e59d2c3299
would separating installs make error more obvious?
2021-03-13 07:29:41 -05:00
71cddcea52
build h7 proteus ( #2429 )
...
* build h7
* scripts
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2021-03-07 16:43:00 -05:00
496acd7fc0
Embed ini ( #2417 )
...
* replace null device with rusefi ini
* comment
* warning
* stub ramdisk for when we don' thave an image
* maybe generate the image with a build
* install mtools
* fail on error
* install deps _before_ we need them
* embed a little readme
* oops
2021-03-03 07:50:53 -05:00
4bdb8cef4c
H7 nucleo build does not have artifacts #2389 maybe?
2021-02-23 19:17:58 -05:00
12b7b737dc
Subaru build ( #2376 )
...
* Subaru EG33: gen_config.sh update
* gen_config and gen_enum_to_string for subaru_eg33 board too
* Subaru eg33: add to buildables
* Subaru: fix build
* Subaru eg33: fix build and cleanup
* subaru eg33: add compile script
* github: subaru_eg33: call special gen_config.sh
2021-02-18 18:18:13 -05:00
819b0f54a8
we shall insist on JDK 8
2021-02-17 10:21:52 -05:00
34608573c1
we shall insist on JDK 8
2021-02-17 10:07:09 -05:00
435f8f7e2b
h7 flash, guard against no CAN ( #2317 )
...
* h7 flash
* guard some other stuff
* I guess it just builds now?
* maybe ci too
2021-02-08 16:24:38 -05:00
6a3cf83d02
goodbye f746 ( #2309 )
2021-02-07 07:52:57 -06:00
d388afff34
mre_f4_recovery build
2021-01-28 17:46:49 -05:00
11c358f65c
Hellen72 config ( #2200 )
...
* Hellen72 config
* Hellen72 files
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2021-01-08 12:50:13 -05:00
d49fc7fc71
Haltech as dash option ( #2165 )
...
* Haltech as dash option
* Update build-firmware.yaml
added generate enums for build-primary-bundle
2020-12-31 12:22:01 -05:00
afaef9ce8f
proteus_f4_hardware_QC_special_build
2020-12-20 09:11:36 -05:00
fa78c3a293
GHA does not upload artifacts #1963
2020-11-18 18:59:02 -05:00
9d885291ca
GHA does not upload artifacts #1963
2020-11-18 18:53:41 -05:00
f0dee2d98f
Revert "fix ( #1951 )"
...
This reverts commit 6a912d4f#1963
2020-11-18 18:45:16 -05:00
231df58918
GHA does not upload artifacts #1963
...
undoing suspicious changes
2020-11-18 18:44:53 -05:00
fcc75992f1
other env vars ( #1953 )
2020-11-16 18:25:44 -05:00
6a912d4f80
fix ( #1951 )
2020-11-16 18:13:04 -05:00
54b613b202
update gcc ( #1939 )
...
* update compiler
* lgtm
* typo
2020-11-11 08:30:26 -05:00
411d4346f4
Fix .ini files for cypress & kinetis bundles ( #1828 )
...
* Hellen says merge #1772 hardware.cpp
* Hellen says merge #1772 adc.h
* Fix .ini files for cypress & kinetis bundles
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-28 07:24:48 -04:00
d299f13bec
Hellen says fix gen_config for Cypress ( #1824 )
...
* Hellen says merge #1772 hardware.cpp
* Hellen says merge #1772 adc.h
* Hellen says fix gen_config for Cypress
* Hellen says fix gen_config actions for Cypress
* Hellen says reset .h files
Co-authored-by: rusefi <rusefillc@gmail.com>
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-09-27 09:56:44 -04:00
a801ecef16
cypress into GHA #1819
2020-09-27 06:27:50 -04:00
5e52f2da60
Cypress CI ( #1820 )
...
* try cypress in matrix
* add empty files
* underscore
2020-09-26 22:13:39 -04:00
593e7608be
run gen_enum_to_string
2020-07-30 11:27:20 -05:00
a59d269114
QC build is broken that's kind of funny
2020-07-27 19:42:29 -04:00
05f012accd
always generate default config
2020-07-21 20:46:39 -05:00
e1ca5c2a94
try ./
2020-07-19 15:30:32 -05:00
6e1d9d1f5b
fix typo
2020-07-19 15:09:29 -05:00
3c51cdded8
upload artifacts
2020-07-19 15:05:47 -05:00
3c701edaeb
proxy progress
2020-07-18 22:50:32 -04:00
4b8dbadad5
more junit test artifacts
2020-07-18 22:30:44 -04:00
9071254932
pass ini file ( #1612 )
2020-07-17 22:32:53 -04:00
2aac840cec
Fix #1590 ( #1602 )
...
* Add checkout
* remove empty with statement
* Actually we do need push depth
* convert gen_upload_docs.bat
* convert run.bat
* forgot to add run.sh
* convert gen_upload_docs.bat
* remove checking from bats
* change config
* fix path
* fix path again
* fix file extension
* remove escapes
* added missing quotation and escapes
* convert build_current_bundle
* convert clean_bootloader
* convert compile_bootloader_discovery
* convert compile_bootloader
* add env var to skip upload
* remove checking from compile.bat
* working on push.yaml
* finish sorting
* progress
* rename push to builds
* rename push to builds
* Add skip upload env var
* fix pull_request name
* fixed typo and changed name
* fixed indentation and runs-on
* try different env var setup
* add nucleos and switch to underscore
* add quotes
* remove boards that were commented
* remove boards that were commented
* fix project board name
* fixed variable name
* add ini-file and console-settings
* try installing gcc-multilib first
* Install g++-multilib as well
* remove unnecessary export
* fixed exit numbers
* change to different env setup
* add simulator and console compilation to board bundles
* changed OS and added linux simulator build
* add checkout and missing colon
* add gcc-multilib installes
* Install mingw
* fixed install
* remove mingw from linux sim and call compile directly
* change directory
* moved envs to command
* debug ls
* debug ls
* set ftp vars
* add makefile debug info
* removed batchecks
* redirect stdout to easier see orrs
* change name
* remove redirect, add file inpection
* Add conditional project name
* Try software upgrade
* missing char
* update ine files
* try quotes
* add escapes
* add quotes
* add escapes and quotes
* remove quotes and escapes
* remove software upgrade
* ignore test 2
* update apt
* like this then
* forgot import
* fix case
* remove RUSEFI_SKIP_UPLOAD and check RUSEFI_FTP_SERVER instead
* break workflow back apart
* upload simulator artifact
* fixed operator
* update apt
* change paths
* Update build-firmware.yaml
* move update bundle to artifacts
* fix var name
* Install ncftp
* set env vars conditionally
* remove check so zips are created
* try things the github way and copy to primary
* re-enable test
* missing space
* use bash
* use bash
* add workflow
* add check before upload
* install kicad
* switch firmware to bash
* switch unit_testts to bash
* switch jenkins to bash
* fix path
* pwd
* checkout submodules
* add ppa for kicad 5.1
* install xvfb and set DISPLAY
* use xvfb
* use python3 and add NO_DISPLAY var
* fetch all
* remove blob
* undo unintentional changes
* reset accidentally commited config.xmlu
* remove submodule
* fix path
* Only call one board
* make simulator and console conditional
* break away bundle packaging
* pass bundle name
* switch to bash
* make primary bundle conditional
* break away packaging for primary and pass config names
* Add default name to unit tests
* add check to skip config
* add property to skip config, and fix check
* switch primary bundle to still build
* switch to bash
* move default config to its own script
* add exit 0
* go back to gen_config running all boards
* remove TS stuf8f
* remove TS stuff
* switch to gen_config_board
* switch to bash
* add kinetis back
* add check for kinetis
* rename compile_and_upload
* add error checking
* Revert "add error checking"
This reverts commit f6c9b7f252
2020-07-14 10:28:26 -04:00
15e44ae9cc
Use github actions to build and upload bundles ( #1583 )
...
* add env var to skip upload
* remove checking from compile.bat
* working on push.yaml
* finish sorting
* progress
* rename push to builds
* rename push to builds
* Add skip upload env var
* fix pull_request name
* fixed typo and changed name
* fixed indentation and runs-on
* try different env var setup
* add nucleos and switch to underscore
* add quotes
* remove boards that were commented
* remove boards that were commented
* fix project board name
* fixed variable name
* add ini-file and console-settings
* try installing gcc-multilib first
* Install g++-multilib as well
* remove unnecessary export
* fixed exit numbers
* change to different env setup
* add simulator and console compilation to board bundles
* changed OS and added linux simulator build
* add checkout and missing colon
* add gcc-multilib installes
* Install mingw
* fixed install
* remove mingw from linux sim and call compile directly
* change directory
* moved envs to command
* debug ls
* debug ls
* set ftp vars
* add makefile debug info
* removed batchecks
* redirect stdout to easier see orrs
* change name
* remove redirect, add file inpection
* Add conditional project name
* Try software upgrade
* missing char
* update ine files
* try quotes
* add escapes
* add quotes
* add escapes and quotes
* remove quotes and escapes
* remove software upgrade
* ignore test 2
* update apt
* like this then
* forgot import
* fix case
* remove RUSEFI_SKIP_UPLOAD and check RUSEFI_FTP_SERVER instead
* break workflow back apart
* upload simulator artifact
* fixed operator
* update apt
* change paths
* Update build-firmware.yaml
* move update bundle to artifacts
* fix var name
* Install ncftp
* set env vars conditionally
* remove check so zips are created
* try things the github way and copy to primary
* re-enable test
* missing space
2020-07-08 11:10:24 -04:00
6b206bf3f1
not compress artifacts
2020-07-02 23:11:48 -04:00
1e8bebd5b3
Gen config refactor 2 ( #1560 )
...
* gen_config refactor, part II
* short board defines
* oops
* comment & undef
* define QUOTE
Co-authored-by: Andrei <andreikagit@users.noreply.github.com>
2020-07-02 12:33:31 -04:00
ce749a669b
proteus-f4 configuration
2020-06-22 10:27:23 -04:00
29833d90c2
proteus build rename
2020-06-22 10:12:07 -04:00
d347998d00
UART DMA for "primary" connector #1528
2020-06-22 01:44:19 -04:00
421702afc9
remove needs ( #1516 )
2020-06-18 19:36:26 -04:00
be780ff893
remove commit from build-firmware ( #1515 )
2020-06-18 19:27:38 -04:00
6595d1d80e
Run gen scripts and unify firmware, simulator, and unit_tests workflows ( #1506 )
...
* add workflow and scripts
* select current branch
* added some comments
* unify build workflows for firmware, testing, and simulator
* move if to steps to keep from skipping
* debug
* Added comment
* Move simulator and unit tests back to their own files
* Move config and livedoc generation to its own file
* Add gen configs workflow
2020-06-18 18:31:54 -04:00
cd1cbd1f76
Remove duplicated workflow ( #1507 )
...
* add workflow and scripts
* Update date
* Removed duplicated workflow
Co-authored-by: GitHub set-date Action <action@github.com>
2020-06-18 17:06:03 -04:00
671d22f112
Add dfu conversion ( #1497 )
2020-06-16 12:33:49 -04:00
858821ed66
proteus -> exti ( #1378 )
...
* proteus -> exti
* do frankenso pal the same way
Co-authored-by: Matthew Kennedy <makenne@microsoft.com>
2020-05-06 18:52:15 -04:00
9d8cd24219
fix ( #1136 )
2020-02-09 20:19:47 -05:00
d67db19a3c
Switch to GitHub hosted compiler ( #1128 )
...
* test
* correct path
* switch to official repo
* is more cores faster?
* no, it isn't
* try mine again
* Fix path
* switch to official
* s
2020-02-06 21:18:35 -03:00
bc8ad6ba9d
remove some configs ( #1127 )
2020-02-05 08:00:45 +05:30
6c76c5fcd6
PAL repair
2019-12-05 21:10:29 -05:00
2b49fc31ea
steps towards fixing PAL inputs
2019-12-05 21:04:24 -05:00
d261c0f3e4
frankenso-pal CI
2019-12-05 20:25:23 -05:00
deaef6c5bc
github CI fix (Kinetis/release) ( #1045 )
...
* fix?
* more fix
* Proteus fix
* fix Kinetis gen_config
* update Kinetis config
* quotes fix?
* quotes fix??
* Okay, no quotes, just move -DFIRMWARE_ID inside .mk
* Exclude Kinetis/debug build
2019-12-04 15:16:26 -05:00
ede7f4d872
more fixing kinetis
2019-12-04 08:52:22 -05:00
24e9a418e7
Kinetis: attempting to fix github CI? ( #1044 )
2019-12-04 08:48:51 -05:00
c0a9eb57a7
would it work?
2019-12-04 07:51:51 -05:00
9fdf74bc18
Base configuration for Proteus ( #1040 )
...
* cfg
* add enum value
* add ci
* actually build the board config
* this is pretty close
* proteus case
2019-12-02 23:54:40 -05:00
5d43ddf0b0
Build prometheus with makefiles instead of batch scripts ( #1020 )
...
* use makefiles instead of batch
* add to ci
* put batch files back, but minimum logic
* default to release
* debug level opt too
2019-11-29 02:39:30 -05:00
ac79a51893
Add workflow for firmware, fix simulator build, trigger builds on PR ( #1018 )
...
* add firmware yaml
* Comments
* run other things on pr
* test simulator build
* update first
* friendly names
* friendly name
2019-11-20 23:34:55 -05:00
rusefillc
rusefi
Nathan Schulte
rusefillc
Matthew Kennedy
dependabot[bot]
David Holdeman
Andrey G
andreika-git
shadowm60
David Holdeman
Matthew Kennedy