mirror of https://github.com/rusefi/rusefi.git
27 lines
1.1 KiB
Bash
Executable File
27 lines
1.1 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# This script will try to flash/update RusEFI part of firmware over can0 interface.
|
|
#
|
|
# You may want to bring can0 interface up first:
|
|
# sudo ip link set can0 type can bitrate 500000 ; sudo ifconfig can0 up
|
|
# Sometimes (after communication errors) you may like to restart interface with:
|
|
# make sure that you have termination resistor
|
|
# sudo ifconfig can0 down; sudo ip link set can0 type can bitrate 500000 ; sudo ifconfig can0 up
|
|
|
|
# sudo apt-get install can-utils
|
|
# candump can0
|
|
|
|
/sbin/ifconfig can0 | grep RUNNING
|
|
|
|
echo This script assumes that you are using can0 interface and it is ready, otherwise read comments inside
|
|
echo This script assumes that you have BootCommander somewhere in your PATH, otherwise read comments inside
|
|
BootCommander -t=xcp_can -d=can0 build/rusefi.srec
|
|
|
|
# OR
|
|
# You can build it from sources with:
|
|
# (cd ext/openblt/Host/Source/LibOpenBLT/ ; mkdir build ; cd build ; cmake .. ; make -j )
|
|
# and
|
|
# (cd ext/openblt/Host/Source/BootCommander/ ; mkdir build ; cd build ; cmake .. ; make -j )
|
|
# And run:
|
|
# ext/openblt/Host/BootCommander -t=xcp_can -d=can0 build/rusefi.srec
|