rusefi
/
rusefi
mirror of https://github.com/rusefi/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
rusefi/firmware/console/binary/output_channels.txt

375 lines
17 KiB
Plaintext
Raw Blame History

! units,scale,offset,min,max,digits
!
! this https://en.wikipedia.org/wiki/God_object is DEPRECATED
! the dream is to move many or most of the state out into smaller structures/classes like electronic_throttle.txt
! See also LiveData.yaml
!
struct_no_prefix output_channels_s
bit sd_present;SD: Present
bit sd_logging_internal;SD: Logging
bit triggerScopeReady
bit antilagTriggered
bit isFanOn;Radiator Fan
bit isO2HeaterOn;
bit checkEngine;
bit needBurn;
bit sd_msd;SD: MSD
bit isFan2On;Radiator Fan 2
bit unusedBitLAtwfs;
bit toothLogReady;Tooth Logger Ready
bit isTpsError;Error: TPS
bit isCltError;Error: CLT
bit isMapError;Error: MAP
bit isIatError;Error: IAT
bit isTriggerError;Error: Trigger
bit hasCriticalError;Error: Active
bit isWarnNow;Warning: Active
bit isPedalError;Error: Pedal
bit isKnockChipOk;
bit launchTriggered;Launch Control Triggered
bit isTps2Error;Error: TPS2
bit isIdleClosedLoop;Idle: Closed Loop
bit injectorFault;Injector Fault
bit ignitionFault;Ignition Fault
bit isMainRelayOn;
bit isUsbConnected;isUsbConnected\nOriginal reason for this is to check if USB is connected from Lua
bit dfcoActive
uint16_t RPMValue;@@GAUGE_NAME_RPM@@;"RPM",1, 0, 0, 8000, 0
int16_t rpmAcceleration;dRPM;"RPM acceleration",1, 0, 0, 5, 2
uint16_t autoscale speedToRpmRatio;@@GAUGE_NAME_GEAR_RATIO@@;"value",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
uint8_t unusedVehicleSpeedKph;@@GAUGE_NAME_VVS@@;"kph",1, 0, 0, 0, 1
int8_t internalMcuTemperature;@@GAUGE_NAME_CPU_TEMP@@;"deg C",1, 0, 0, 0, 0
int16_t autoscale coolant;@@GAUGE_NAME_CLT@@;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale intake;@@GAUGE_NAME_IAT@@;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale auxTemp1;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale auxTemp2;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale TPSValue;@@GAUGE_NAME_TPS@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale throttlePedalPosition;@@GAUGE_NAME_THROTTLE_PEDAL@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
uint16_t tpsADC;;"ADC", 1, 0, 0, 0, 0
uint16_t autoscale rawMaf;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale mafMeasured;@@GAUGE_NAME_AIR_FLOW_MEASURED@@;"kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 1
uint16_t autoscale MAPValue;@@GAUGE_NAME_MAP@@;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 1
uint16_t autoscale baroPressure;;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 1
uint16_t autoscale lambdaValue;@@GAUGE_NAME_LAMBDA@@;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 3
uint16_t autoscale VBatt;@@GAUGE_NAME_VBAT@@;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 0, 2
uint16_t autoscale oilPressure;@@GAUGE_NAME_OIL_PRESSURE@@;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
int16_t autoscale vvtPositionB1I;@@GAUGE_NAME_VVT_B1I@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
uint16_t autoscale actualLastInjection;@@GAUGE_NAME_FUEL_LAST_INJECTION@@\nActual last injection time - including all compensation and injection mode;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 3
uint8_t autoscale injectorDutyCycle;@@GAUGE_NAME_FUEL_INJ_DUTY@@;"%",{1/2}, 0, 0, 0, 0
uint8_t autoscale veValue;@@GAUGE_NAME_FUEL_VE@@;"ratio",{1/2}, 0, 0, 0, 1
int16_t injectionOffset;@@GAUGE_NAME_FUEL_INJECTION_TIMING@@;"deg", 1, 0, 0, 0, 0
! Corrections
! we want a hash of engineMake+engineCode+vehicleName in the log file in order to match TS logs to rusEFI Online tune
uint16_t engineMakeCodeNameCrc16;@@GAUGE_NAME_ENGINE_CRC16@@;"crc16",1, 0, 0, 0, 0
! Wall model AE
uint16_t autoscale wallFuelAmount;@@GAUGE_NAME_FUEL_WALL_AMOUNT@@;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 3
int16_t autoscale wallFuelCorrectionValue;@@GAUGE_NAME_FUEL_WALL_CORRECTION@@;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 3
uint16_t revolutionCounterSinceStart;;"",1, 0, 0, 0, 0
uint16_t canReadCounter;@@GAUGE_NAME_CAN_READ_OK@@;"",1, 0, 0, 64000, 0
int16_t autoscale tpsAccelFuel;@@GAUGE_NAME_FUEL_TPS_EXTRA@@;"ms",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 3
! Ignition
uint8_t currentIgnitionMode;@@GAUGE_NAME_IGNITION_MODE@@
uint8_t currentInjectionMode;@@GAUGE_NAME_INJECTION_MODE@@
uint16_t autoscale coilDutyCycle;@@GAUGE_NAME_DWELL_DUTY@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
! Idle & ETB
uint16_t autoscale idleAirValvePosition;@@GAUGE_NAME_IAC@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 1
int16_t autoscale etbTarget;ETB Target;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale etb1DutyCycle;@@GAUGE_NAME_ETB_DUTY@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 1
! Fuel system
int16_t autoscale fuelTankLevel;Fuel level;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
uint16_t totalFuelConsumption;@@GAUGE_NAME_FUEL_CONSUMPTION@@;"grams",1, 0, 0, 0, 1
uint16_t autoscale fuelFlowRate;@@GAUGE_NAME_FUEL_FLOW@@;"gram/s",{1/@@PACK_MULT_FUEL_FLOW@@}, 0, 0, 0, 3
int16_t autoscale TPS2Value;@@GAUGE_NAME_TPS2@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
uint16_t tuneCrc16;@@GAUGE_NAME_TUNE_CRC16@@;"crc16", 1, 0, 0, 0, 0
! integration magic: TS requires exact 'seconds' name
uint32_t seconds;@@GAUGE_NAME_UPTIME@@;"sec", 1, 0, 0, 0, 0
uint32_t engineMode;Engine Mode;"em", 1, 0, 0, 0, 0
uint32_t firmwareVersion;@@GAUGE_NAME_VERSION@@;"version_f", 1, 0, 0, 0, 0
int16_t autoscale rawIdlePositionSensor;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawWastegatePosition;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
! todo: reimplement { LIS302DLCsPin != 0 || imuType != 0 }
int16_t autoscale accelerationX;@@GAUGE_NAME_ACCEL_X@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale accelerationY;@@GAUGE_NAME_ACCEL_Y@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
uint8_t detectedGear;@@GAUGE_NAME_DETECTED_GEAR@@;"", 1, 0, 0, @@GEARS_COUNT@@, 0
uint8_t maxTriggerReentrant;;"", 1, 0, 0, 100, 0
int16_t autoscale rawLowFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawHighFuelPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale lowFuelPressure;@@GAUGE_NAME_FUEL_PRESSURE_LOW@@;"kpa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 0, 0
int8_t tcuDesiredGear;@@GAUGE_NAME_DESIRED_GEAR@@;"gear",1, 0, -1, 10, 0
uint8_t autoscale flexPercent;@@GAUGE_NAME_FLEX@@;"%",{1/2}, 0, 0, 0, 1
int16_t autoscale wastegatePositionSensor;@@GAUGE_NAME_WG_POSITION@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale highFuelPressure;@@GAUGE_NAME_FUEL_PRESSURE_HIGH@@;"bar",{1/@@PACK_MULT_HIGH_PRESSURE@@}, 0, 0, 0, 0
! These two fields indicate to TS that we'd like to set a particular field to a particular value
! We use a maintainConstantValue in TS for each field we'd like to set, like this:
! maintainConstantValue = tpsMax, { (calibrationMode == 1 ) ? calibrationValue : tpsMax }
! maintainConstantValue = tpsMin, { (calibrationMode == 2 ) ? calibrationValue : tpsMin }
! When the mode is set to a particular value, TS will copy the calibrationValue in to the specified field.
!
! With this simple construct, the ECU can send any number of internally computed configuration fields
! back to TunerStudio, getting around the problem of setting values on the controller without TS's knowledge.
! The ECU simply has to sequentially set a mode/value, wait briefly, then repeat until all the values
! it wants to send have been sent.
float calibrationValue;;"", 1, 0, 0, 0, 0
uint8_t calibrationMode;;"", 1, 0, 0, 0, 0
uint8_t idleStepperTargetPosition;Idle: Stepper target position;"", 1, 0, 0, 0, 0
! todo: this not needed in light of TS_SIGNATURE but rusEFI console still uses it. Need to migrate
! rusEFI console from TS_FILE_VERSION to TS_SIGNATURE :(
uint32_t tsConfigVersion;;"", 1, 0, 0, 0, 0
! Errors
uint32_t totalTriggerErrorCounter;@@GAUGE_NAME_TRG_ERR@@;"counter",1, 0, 0, 0, 0
uint32_t orderingErrorCounter;;"",1, 0, 0, 0, 0
uint16_t warningCounter;@@GAUGE_NAME_WARNING_COUNTER@@;"count",1, 0, 0, 0, 0
uint16_t lastErrorCode;@@GAUGE_NAME_WARNING_LAST@@;"error",1, 0, 0, 0, 0
uint16_t[8 iterate] recentErrorCode;;"error", 1, 0, 0, 0, 0
! todo: re-implement enableLogDebugChannels
float debugFloatField1;;"val", 1, 0, 0, 0, 3
float debugFloatField2;;"val", 1, 0, 0, 0, 3
float debugFloatField3;;"val", 1, 0, 0, 0, 3
float debugFloatField4;;"val", 1, 0, 0, 0, 3
float debugFloatField5;;"val", 1, 0, 0, 0, 3
float debugFloatField6;;"val", 1, 0, 0, 0, 3
float debugFloatField7;;"val", 1, 0, 0, 0, 3
uint32_t debugIntField1;;"val", 1, 0, 0, 0, 0
uint32_t debugIntField2;;"val", 1, 0, 0, 0, 0
uint32_t debugIntField3;;"val", 1, 0, 0, 0, 0
int16_t debugIntField4;;"val", 1, 0, 0, 0, 0
int16_t debugIntField5;;"val", 1, 0, 0, 0, 0
uint16_t[EGT_CHANNEL_COUNT iterate] egt;EGT;"deg C", 1, 0, 0, 0, 0
int16_t autoscale rawTps1Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawPpsPrimary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawClt;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawIat;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawOilPressure;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint8_t fuelClosedLoopBinIdx;;"", 1, 0, 0, 0, 0
int8_t tcuCurrentGear;@@GAUGE_NAME_CURRENT_GEAR@@;"gear", 1, 0, -1, 10, 0
int16_t autoscale rawPpsSecondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int8_t[12 iterate] knock;Knock: Cyl;"dBv",1, 0, 0, 0, 0
int16_t autoscale idlePositionSensor;@@GAUGE_NAME_IDLE_POSITION@@;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
uint16_t autoscale AFRValue;@@GAUGE_NAME_AFR@@;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 2
uint16_t autoscale VssAcceleration;Vss Accel;"m/s2",{1/@@PACK_MULT_MS@@}, 0, 0, 0, 2
uint16_t autoscale lambdaValue2;@@GAUGE_NAME_LAMBDA2@@;"",{1/@@PACK_MULT_LAMBDA@@}, 0, 0, 0, 3
uint16_t autoscale AFRValue2;@@GAUGE_NAME_AFR2@@;"AFR",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 2
int16_t autoscale vvtPositionB1E;@@GAUGE_NAME_VVT_B1E@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
int16_t autoscale vvtPositionB2I;@@GAUGE_NAME_VVT_B2I@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
int16_t autoscale vvtPositionB2E;@@GAUGE_NAME_VVT_B2E@@;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
int16_t[2 iterate] autoscale fuelPidCorrection;Fuel: Trim bank;"%",{1/@@PACK_MULT_PERCENT@@}, 0, -20, 20, 2
int16_t autoscale rawTps1Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawTps2Primary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale rawTps2Secondary;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t autoscale accelerationZ;@@GAUGE_NAME_ACCEL_Z@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accelerationRoll;@@GAUGE_NAME_ACCEL_ROLL@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int16_t autoscale accelerationYaw;@@GAUGE_NAME_ACCEL_YAW@@;"G",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
int8_t[4 iterate] vvtTargets;;"deg",1, 0, 0, 0, 0
uint16_t turboSpeed;@@GAUGE_NAME_TURBO_SPEED@@;"hz",1, 0, 0, 0, 0
int16_t[MAX_CYLINDER_COUNT iterate] autoscale ignitionAdvanceCyl;Ign: Timing Cyl;"deg",{1/@@PACK_MULT_ANGLE@@}, 0, 0, 0, 1
! fun fact: we have a separate pid_state.txt file for a bit of a different structure huh?
struct pid_status_s
float pTerm;;"", 1, 0, -50000, 50000, 2
int16_t autoscale iTerm;;"", 0.01, 0, -327, 327, 2
int16_t autoscale dTerm;;"", 0.01, 0, -327, 327, 2
int16_t autoscale output;;"", 0.01, 0, -327, 327, 2
int16_t autoscale error;;"", 0.01, 0, -327, 327, 2
uint32_t resetCounter;;"", 1, 0, 0, 10000, 0
end_struct
int16_t autoscale tps1Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale tps2Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale tps12Split;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int16_t autoscale accPedalSplit;;"%",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 2
int8_t sparkCutReason;Ign: Cut Code;"code",1, 0, 0, 0, 0
int8_t fuelCutReason;Fuel: Cut Code;"code",1, 0, 0, 0, 0
uint16_t autoscale mafEstimate;@@GAUGE_NAME_AIR_FLOW_ESTIMATE@@;"kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 0
uint16_t instantRpm;sync: instant RPM;"rpm", 1, 0, 0, 0, 0
uint16_t autoscale rawMap;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale rawAfr;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
float calibrationValue2;;"", 1, 0, 0, 0, 0
uint32_t luaInvocationCounter;Lua: Tick counter;"count",1, 0, 0, 0, 0
uint32_t luaLastCycleDuration;Lua: Last tick duration;"nt",1, 0, 0, 0, 0
uint8_t tcu_currentRange;"TCU: Current Range";"", 1, 0, 0, 0, 0
uint16_t autoscale tcRatio;@@GAUGE_NAME_TC_RATIO@@;"value",{1/@@PACK_MULT_PERCENT@@}, 0, 0, 0, 0
float lastShiftTime
uint32_t vssEdgeCounter
uint32_t issEdgeCounter
int16_t autoscale auxLinear1;@@GAUGE_NAME_AUX_LINEAR_1@@;"", 0.01, 0, 0, 0, 2
int16_t autoscale auxLinear2;@@GAUGE_NAME_AUX_LINEAR_2@@;"", 0.01, 0, 0, 0, 2
uint16_t autoscale fallbackMap;;"kPa", 0.1, 0, 0, 1000, 1
uint16_t autoscale instantMAPValue;Instant MAP;"kPa",{1/@@PACK_MULT_PRESSURE@@}, 0, 0, 655, 2
uint16_t maxLockedDuration;;"us", 1, 0, 0, 65535, 0
uint16_t canWriteOk;@@GAUGE_NAME_CAN_WRITE_OK@@;"", 1, 0, 0, 64000, 0
uint16_t canWriteNotOk;@@GAUGE_NAME_CAN_WRITE_ERR@@;"", 1, 0, 0, 64000, 0
uint32_t triggerPrimaryFall;;"", 1, 0, -10000, 10000, 3
uint32_t triggerPrimaryRise;;"", 1, 0, -10000, 10000, 3
uint32_t triggerSecondaryFall;;"", 1, 0, -10000, 10000, 3
uint32_t triggerSecondaryRise;;"", 1, 0, -10000, 10000, 3
uint16_t triggerVvtFall;;"", 1, 0, 0, 3000, 0
uint16_t triggerVvtRise;;"", 1, 0, 0, 3000, 0
uint16_t triggerVvt2Fall;;"", 1, 0, 0, 3000, 0, @@GAUGE_CATEGORY_SYNC@@
uint16_t triggerVvt2Rise;;"", 1, 0, 0, 3000, 0, @@GAUGE_CATEGORY_SYNC@@
uint8_t starterState;;"", 1, 0, -10000, 10000, 3
uint8_t starterRelayDisable;;"", 1, 0, -10000, 10000, 3
uint8_t multiSparkCounter;Ign: Multispark count;"", 1, 0, -10000, 10000, 3
uint8_t extiOverflowCount;;"", 1, 0, 0, 255, 0
pid_status_s alternatorStatus
pid_status_s idleStatus
pid_status_s etbStatus
pid_status_s boostStatus
pid_status_s wastegateDcStatus
pid_status_s[CAM_INPUTS_COUNT iterate] vvtStatus
uint16_t auxSpeed1;Aux speed 1;"s",1, 0, 0, 0, 0
uint16_t auxSpeed2;Aux speed 2;"s",1, 0, 0, 0, 0
uint16_t ISSValue;@@GAUGE_NAME_ISS@@;"RPM",1, 0, 0, 8000, 0
int16_t[LUA_ANALOG_INPUT_COUNT iterate] autoscale rawAnalogInput;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint8_t[4 iterate] autoscale gppwmOutput;GPPWM Output;"%", 0.5, 0, 0, 100, 2
int16_t[4 iterate] autoscale gppwmXAxis;;"", 1, 0, -30000, 30000, 0
int16_t[4 iterate] autoscale gppwmYAxis;;"", 0.1, 0, -1000, 1000, 1
int16_t autoscale rawBattery;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
int16_t[IGN_BLEND_COUNT iterate] autoscale ignBlendParameter;;"", 0.1, 0, -1000, 1000, 1
uint8_t[IGN_BLEND_COUNT iterate] autoscale ignBlendBias;;"%", 0.5, 0, 0, 100, 1
int16_t[IGN_BLEND_COUNT iterate] autoscale ignBlendOutput;;"deg", 0.01, 0, -300, 300, 2
int16_t[VE_BLEND_COUNT iterate] autoscale veBlendParameter;;"", 0.1, 0, -1000, 1000, 1
uint8_t[VE_BLEND_COUNT iterate] autoscale veBlendBias;;"%", 0.5, 0, 0, 100, 1
int16_t[VE_BLEND_COUNT iterate] autoscale veBlendOutput;;"%", 0.01, 0, -50, 50, 2
int16_t[BOOST_BLEND_COUNT iterate] autoscale boostOpenLoopBlendParameter;;"", 0.1, 0, -1000, 1000, 1
uint8_t[BOOST_BLEND_COUNT iterate] autoscale boostOpenLoopBlendBias;;"%", 0.5, 0, 0, 100, 1
int8_t[BOOST_BLEND_COUNT iterate] autoscale boostOpenLoopBlendOutput;;"%", 1, 0, -100, 100, 0
int16_t[BOOST_BLEND_COUNT iterate] autoscale boostClosedLoopBlendParameter;;"", 0.1, 0, -1000, 1000, 1
uint8_t[BOOST_BLEND_COUNT iterate] autoscale boostClosedLoopBlendBias;;"%", 0.5, 0, 0, 100, 1
int16_t[BOOST_BLEND_COUNT iterate] autoscale boostClosedLoopBlendOutput;;"%", 0.1, 0, -1000, 1000, 1
bit coilState1
bit coilState2
bit coilState3
bit coilState4
bit coilState5
bit coilState6
bit coilState7
bit coilState8
bit coilState9
bit coilState10
bit coilState11
bit coilState12
bit injectorState1
bit injectorState2
bit injectorState3
bit injectorState4
bit injectorState5
bit injectorState6
bit injectorState7
bit injectorState8
bit injectorState9
bit injectorState10
bit injectorState11
bit injectorState12
bit triggerChannel1
bit triggerChannel2
bit vvtChannel1
bit vvtChannel2
bit vvtChannel3
bit vvtChannel4
uint32_t outputRequestPeriod
float mapFast
float[LUA_GAUGE_COUNT iterate] luaGauges;Lua: Gauge;"value",1, 0, 0, 50000, 3
uint16_t autoscale rawMaf2;;"V",{1/@@PACK_MULT_VOLTAGE@@}, 0, 0, 5, 3
uint16_t autoscale mafMeasured2;@@GAUGE_NAME_AIR_FLOW_MEASURED_2@@;"kg/h",{1/@@PACK_MULT_MASS_FLOW@@}, 0, 0, 0, 1
uint16_t autoscale vehicleSpeedKph;@@GAUGE_NAME_VVS@@;"kph",{1/@@PACK_MULT_VSS@@}, 0, 0, 0, 2
uint16_t autoscale Gego;;"%",0.01,0,50,150,2
uint16_t testBenchIter;;"count",1, 0, 0, 0, 0
int16_t autoscale oilTemp;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale fuelTemp;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale ambientTemp;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
int16_t autoscale compressorDischargeTemp;;"deg C",{1/@@PACK_MULT_TEMPERATURE@@}, 0, 0, 0, 1
uint8_t[132 iterate] unusedAtTheEnd;;"",1, 0, 0, 0, 0
end_struct
Reference in New Issue View Git Blame Copy Permalink