mirror of https://github.com/rusefi/rusefi.git
87 lines
2.6 KiB
C++
87 lines
2.6 KiB
C++
/**
|
|
* @file bmw_e34.cpp
|
|
*
|
|
* set_engine_type 25
|
|
*
|
|
* Coil pairs: 1-6, 2-5, 3-4
|
|
*
|
|
* Injector groups: 1,2,3 è 4,5,6
|
|
*
|
|
* @date Nov 5, 2014
|
|
* @author Andrey Belomutskiy, (c) 2012-2014
|
|
*/
|
|
|
|
#include "global.h"
|
|
#include "bmw_e34.h"
|
|
|
|
void setBmwE34(engine_configuration_s *engineConfiguration) {
|
|
engineConfiguration->rpmHardLimit = 6000;
|
|
setOperationMode(engineConfiguration, FOUR_STROKE_CRANK_SENSOR);
|
|
|
|
engineConfiguration->triggerConfig.triggerType = TT_TOOTHED_WHEEL_60_2;
|
|
engineConfiguration->cylindersCount = 6;
|
|
engineConfiguration->firingOrder = FO_1_THEN_5_THEN_3_THEN_6_THEN_2_THEN_4;
|
|
engineConfiguration->injectionMode = IM_SIMULTANEOUS;
|
|
engineConfiguration->ignitionMode = IM_WASTED_SPARK;
|
|
|
|
engineConfiguration->ignMathCalculateAtIndex = 15;
|
|
|
|
setConstantDwell(engineConfiguration, 3); // a bit shorter dwell
|
|
engineConfiguration->useConstantDwellDuringCranking = true;
|
|
engineConfiguration->ignitionDwellForCrankingMs = 5;
|
|
|
|
// todo: check the digital sniffer while simulating
|
|
// set_global_trigger_offset_angle 84
|
|
engineConfiguration->globalTriggerAngleOffset = 84;
|
|
|
|
setWholeFuelMap(engineConfiguration, 6);
|
|
setWholeTimingTable(engineConfiguration, 10);
|
|
|
|
board_configuration_s *bc = &engineConfiguration->bc;
|
|
bc->malfunctionIndicatorPin = GPIO_UNASSIGNED;
|
|
|
|
// bc->isFastAdcEnabled = true;
|
|
|
|
bc->ignitionPinMode = OM_INVERTED;
|
|
bc->ignitionPins[0] = GPIOC_7; // #1
|
|
bc->ignitionPins[1] = GPIO_UNASSIGNED; // #2
|
|
bc->ignitionPins[2] = GPIOE_4; // #3
|
|
bc->ignitionPins[3] = GPIO_UNASSIGNED; // #4
|
|
bc->ignitionPins[4] = GPIOC_9; // #5
|
|
bc->ignitionPins[5] = GPIO_UNASSIGNED; // #6
|
|
|
|
bc->injectionPinMode = OM_INVERTED;
|
|
|
|
bc->injectionPins[0] = GPIOB_9; // #1
|
|
bc->injectionPins[1] = GPIOB_8; // #2
|
|
/**
|
|
* this is a relatively dirty performance hack: with unassigned pin we
|
|
* have less stuff to put into wave chart
|
|
*/
|
|
bc->injectionPins[2] = GPIO_UNASSIGNED; // #3
|
|
bc->injectionPins[3] = GPIO_UNASSIGNED; // #4
|
|
bc->injectionPins[4] = GPIO_UNASSIGNED; // #5
|
|
bc->injectionPins[5] = GPIO_UNASSIGNED; // #6
|
|
|
|
bc->triggerErrorPin = GPIOE_3;
|
|
|
|
/**
|
|
* emulating the 60-0 trigger takes some resources, let's keep it slow by default
|
|
* rpm 200
|
|
*/
|
|
bc->triggerSimulatorFrequency = 200;
|
|
|
|
engineConfiguration->map.sensor.sensorType = MT_MPX4250;
|
|
|
|
engineConfiguration->hasCltSensor = false;
|
|
engineConfiguration->hasIatSensor = false;
|
|
|
|
/**
|
|
* This saves a couple of ticks in trigger emulation methods
|
|
* TODO: add some smart logic to detect unneeded trigger simulation pins?
|
|
* TODO: but probably not worth it
|
|
*/
|
|
bc->triggerSimulatorPins[1] = GPIO_UNASSIGNED;
|
|
bc->triggerSimulatorPins[2] = GPIO_UNASSIGNED;
|
|
}
|