mirror of https://github.com/rusefi/rusefi.git
57 lines
1.9 KiB
Makefile
57 lines
1.9 KiB
Makefile
# Combine the related files for a specific platform and MCU.
|
|
|
|
# Target ECU board design
|
|
BOARDCPPSRC = $(BOARD_DIR)/board_configuration.cpp
|
|
|
|
BOARDINC = $(BOARD_DIR)
|
|
|
|
# see also openblt/board.mk STATUS_LED
|
|
DDEFS += -DLED_CRITICAL_ERROR_BRAIN_PIN=Gpio::E3
|
|
|
|
# *TEMPORARY* breaking TTL thus breaking Bluetooth for microRusEFI in order to enable SPI3 for SD card
|
|
# *TODO* need to give people the horrible choice between Bluetooth via TTL or SD card via SPI :( horrible choice
|
|
# PB10/PB11 uses UART3 peripheral and J12/J13 on MRE
|
|
# we also have PC10/PC11 exposed on J4 but that's same UART3
|
|
DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=Gpio::B10 -DEFI_CONSOLE_RX_BRAIN_PIN=Gpio::B11
|
|
|
|
# on MRE 0.6.0 we have SD card on SPI2 which shared channel 3 with USART3
|
|
# todo: enable serial which would not DMA thus not conflict?
|
|
DDEFS += -DSTM32_UART_USE_USART3=FALSE -DHAL_USE_UART=FALSE
|
|
DDEFS += -DEFI_USE_UART_DMA=FALSE
|
|
|
|
# maybe a way to disable SPI2 privately
|
|
#DDEFS += -DSTM32_SPI_USE_SPI2=FALSE
|
|
|
|
DDEFS += -DBOARD_TLE8888_COUNT=1
|
|
DDEFS += -DEFI_MC33816=TRUE
|
|
|
|
DDEFS += -DFIRMWARE_ID=\"microRusEFI\"
|
|
DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
|
|
DDEFS += $(VAR_DEF_ENGINE_TYPE)
|
|
|
|
# F7 we are running out of flash?! only package goodies into F4
|
|
ifeq ($(PROJECT_CPU),ARCH_STM32F4)
|
|
# This board can capture SENT
|
|
DDEFS += -DEFI_SENT_SUPPORT=TRUE
|
|
|
|
# This board has LIN/K-line interface
|
|
DDEFS += -DEFI_KLINE=TRUE
|
|
endif
|
|
|
|
DDEFS += -DKLINE_SERIAL_DEVICE_RX=Gpio::D9 -DKLINE_SERIAL_DEVICE_TX=Gpio::D8
|
|
DDEFS += -DKLINE_SERIAL_DEVICE=SD3
|
|
DDEFS += -DSTM32_SERIAL_USE_USART3=TRUE
|
|
|
|
# We are running on microRusEFI hardware!
|
|
DDEFS += -DHW_MICRO_RUSEFI=1
|
|
|
|
ifeq ($(PROJECT_CPU),ARCH_STM32F7)
|
|
USE_OPT += -Wl,--defsym=FLASH_SIZE=768k
|
|
DDEFS += -DSTATIC_BOARD_ID=STATIC_BOARD_ID_MRE_F7
|
|
else ifeq ($(PROJECT_CPU),ARCH_STM32F4)
|
|
DDEFS += -DSTATIC_BOARD_ID=STATIC_BOARD_ID_MRE_F4
|
|
DDEFS += -DRAM_UNUSED_SIZE=4000
|
|
else
|
|
$(error Unsupported PROJECT_CPU [$(PROJECT_CPU)])
|
|
endif
|