mirror of https://github.com/rusefi/rusefi.git
35 lines
1.7 KiB
Plaintext
35 lines
1.7 KiB
Plaintext
struct_no_prefix fuel_computer_s
|
|
|
|
float totalFuelCorrection;Fuel: Total correction;"mult", 1,0, 0,3, 2,@@GAUGE_CATEGORY_FUEL_MATH@@
|
|
struct running_fuel_s
|
|
float postCrankingFuelCorrection;Fuel: Post cranking mult
|
|
float intakeTemperatureCoefficient;@@GAUGE_NAME_FUEL_IAT_CORR@@
|
|
float coolantTemperatureCoefficient;@@GAUGE_NAME_FUEL_CLT_CORR@@
|
|
float timeSinceCrankingInSecs;;"secs", 1,0, 0,600000, 0, @@GAUGE_CATEGORY_FUEL_MATH@@
|
|
|
|
uint16_t autoscale baseFuel;@@GAUGE_NAME_FUEL_BASE@@\nThis is the raw value we take from the fuel map or base fuel algorithm, before the corrections;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 3
|
|
uint16_t autoscale fuel;@@GAUGE_NAME_FUEL_RUNNING@@\nTotal fuel with CLT IAT and TPS acceleration without injector lag corrections per cycle, as pulse per cycle;"mg",{1/@@PACK_MULT_FUEL_MASS@@}, 0, 0, 0, 3
|
|
! end of running_fuel_s structure definition
|
|
end_struct
|
|
|
|
! actually define a member of 'running_fuel_s' type
|
|
running_fuel_s running
|
|
|
|
uint16_t autoscale afrTableYAxis;;"%",{1/100},0, 0, 0, 0
|
|
uint16_t autoscale targetLambda;@@GAUGE_NAME_TARGET_LAMBDA@@;"",{1/@@PACK_MULT_LAMBDA@@},0, 0.5,1.5, 2,@@GAUGE_CATEGORY_FUEL_MATH@@
|
|
uint16_t autoscale targetAFR;@@GAUGE_NAME_TARGET_AFR@@;"ratio", {1/@@PACK_MULT_AFR@@},0, 10,20, 2,@@GAUGE_CATEGORY_FUEL_MATH@@
|
|
|
|
uint16_t autoscale stoichiometricRatio;Fuel: Stoich ratio;"ratio",{1/@@PACK_MULT_AFR@@}, 0, 0, 0, 2
|
|
|
|
! c'mon, not the whole LiveData spaghetti for SD class?
|
|
float sdTcharge_coff
|
|
float sdAirMassInOneCylinder;@@GAUGE_NAME_AIR_MASS@@;"g",1, 0, 0, 0, 3
|
|
float normalizedCylinderFilling;Air: Normalized cyl filling;"%", 1, 0, 0, 100, 1
|
|
|
|
uint8_t brokenInjector
|
|
uint8_t unused88
|
|
uint16_t idealEngineTorque
|
|
|
|
bit injectorHwIssue
|
|
end_struct
|