bdd173c2d6 | ||
---|---|---|
.. | ||
v1.0 (Beta) | ||
v1.1 | ||
v1.2 | ||
README.md |
README.md
PCB Design folder
In this folder you will find all the design iterations the PCB for Ultimate-NAG52 has gone through
PCB Changelog
V1.2 (First production release)
Changes
- Replaced TFT Pullup resistor (R6) from 10K to 2K
- Minor silkscreen fixes
- Added teardrops
V1.1 (First release)
Changes
- Switched LM25765 Bucks to TPS5430DDAR
- Removed all electrolytic capacitors, replaced with tantalum ones
- Added smoothing outputs to INA180 current outputs (For better reading with ESP32's ADC)
- Added ESD protections
- Replaced the Type-C port with one that would not so easily break off the board
- Allow for either CP2102N or CP2104N UART bridge to be used
- Better noise filtering for ATF temp, N2 and N3 pulse counters
New features
- Added support for the legacy TRRS shifters found in W210 and older cars!
- Added CANBUS isolation choke
- Added additional credits to PCB silkscreen
V1.0 (Only available to beta testers)
NOTE: This is a closed beta board, so only the schematic was made public
- Initial release board for beta testers only