diff --git a/ardustim/ardustim/ardustim.ino b/ardustim/ardustim/ardustim.ino
index 498338f..9ef8120 100644
--- a/ardustim/ardustim/ardustim.ino
+++ b/ardustim/ardustim/ardustim.ino
@@ -122,7 +122,8 @@ wheels Wheels[MAX_WHEELS] = {
   { Toyota_4AGZE_friendly_name, toyota_4AGZE, 0.333, 144, 720 },
   { Suzuki_DRZ400_friendly_name, suzuki_DRZ400,0.6, 72, 360},
   { Jeep_2000_friendly_name, jeep_2000, 1.5, 360, 720},
-  { BMW_N20_friendly_name, bmw_n20, 1.0, 240, 720}
+  { BMW_N20_friendly_name, bmw_n20, 1.0, 240, 720},
+  { VIPER9602_friendly_name, viper9602wheel, 1.0, 240, 720},
 };
 
 /* Initialization */
diff --git a/ardustim/ardustim/wheel_defs.h b/ardustim/ardustim/wheel_defs.h
index 43863fa..e5aacf3 100644
--- a/ardustim/ardustim/wheel_defs.h
+++ b/ardustim/ardustim/wheel_defs.h
@@ -133,6 +133,7 @@
    SUZUKI_DRZ400,         /* Suzuki DRZ-400 6 coil "tooths", 2 uneven crank tooths */
    JEEP2000,  /* Jeep 4.0 6cyl aka jeep2000 */
    BMW_N20, //BMW N20 58x and custom cam wheels
+   VIPER_96_02, // Dodge Viper 1996-2002 wheel pattern
    MAX_WHEELS,
  }WheelType;
 
@@ -197,6 +198,7 @@
  const char Suzuki_DRZ400_friendly_name[] PROGMEM = "Suzuki DRZ400";
  const char Jeep_2000_friendly_name[] PROGMEM = "Jeep 2000";
  const char BMW_N20_friendly_name[] PROGMEM = "BMW N20";
+ const char VIPER9602_friendly_name[] PROGMEM = "Dodge Viper V10 1996-2002";
 
  /* Very simple 50% duty cycle */
  const unsigned char dizzy_four_cylinder[] PROGMEM = 
@@ -1427,5 +1429,39 @@
      1,0,1,0,1,0,0,0,0,0, //Crank teeth 56-60 - last two teeth missing
    };
 
+   const unsigned char viper9602wheel[] PROGMEM = 
+   // Viper pattern has 10 total crank teeth that are on shortly in pairs. Cam is high for 360* of crank then low for the next 360* of crank
+   // This pattern was added by Dale Follett of Twisted Builds LLC going off a supplied oscilloscope image of the wheel pattern. Due to this
+   // There is no guarentees on this wheel pattern as of 3/24/2024 and this pattern should be used at your own risk. However it should be correct.
+   // I'm basing this using percentages. 120 total "edges" but should duplicate the factory wheels. Will test with o-scope.
+   {
+      //Cam on this revolution
+      2,2,2,2,2,2,3,3,2,2, //1-5
+      2,2,3,3,2,2,2,2,2,2, //6-10
+      2,2,2,2,2,2,2,2,2,2, //11-15
+      3,3,2,2,2,2,3,3,2,2, //16-20
+      2,2,2,2,2,2,2,2,2,2, //21-25
+      2,2,2,2,3,3,2,2,2,2, //26-30
+      3,3,2,2,2,2,2,2,2,2, //31-35
+      2,2,2,2,2,2,2,2,3,3, //36-40
+      2,2,2,2,3,3,2,2,2,2, //41-45
+      2,2,2,2,2,2,2,2,2,2, //46-50
+      2,2,3,3,2,2,2,2,3,3, //51-55
+      2,2,2,2,2,2,2,2,2,2, //56-60
+      //Cam off this revolution
+      0,0,0,0,0,0,1,1,0,0, //1-5
+      0,0,1,1,0,0,0,0,0,0, //6-10
+      0,0,0,0,0,0,0,0,0,0, //11-15
+      1,1,0,0,0,0,1,1,0,0, //16-20
+      0,0,0,0,0,0,0,0,0,0, //21-25
+      0,0,0,0,1,1,0,0,0,0, //26-30
+      1,1,0,0,0,0,0,0,0,0, //31-35
+      0,0,0,0,0,0,0,0,1,1, //36-40
+      0,0,0,0,1,1,0,0,0,0, //41-45
+      0,0,0,0,0,0,0,0,0,0, //46-50
+      0,0,1,1,0,0,0,0,1,1, //51-55
+      0,0,0,0,0,0,0,0,0,0, //56-60
+   };
+
 
   #endif